diff mbox series

[1/3,net-next,v3] net: ethernet: ixp4xx: Add DT bindings

Message ID 20210423082208.2244803-1-linus.walleij@linaro.org
State New
Headers show
Series [1/3,net-next,v3] net: ethernet: ixp4xx: Add DT bindings | expand

Commit Message

Linus Walleij April 23, 2021, 8:22 a.m. UTC
This adds device tree bindings for the IXP4xx ethernet
controller with optional MDIO bridge.

Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v2->v3:
- Designate phy nodes with ethernet-phy@
- Include phy-mode in the schema
ChangeLog v1->v2:
- Add schema for the (optional) embedded MDIO bus inside
  the ethernet controller in an "mdio" node instead of just
  letting the code randomly populate and present it to
  the operating system.
- Reference the standard schemas for ethernet controller and
  MDIO buses.
- Add intel,npe to indentify the NPE unit used with each
  ethernet adapter.
---
 .../bindings/net/intel,ixp4xx-ethernet.yaml   | 82 +++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml

-- 
2.29.2

Comments

Andrew Lunn April 23, 2021, 2:49 p.m. UTC | #1
On Fri, Apr 23, 2021 at 10:22:06AM +0200, Linus Walleij wrote:
> This adds device tree bindings for the IXP4xx ethernet

> controller with optional MDIO bridge.


Hi Linus

That optional MDIO bus sentence is important here. I think it would be
good to give examples for say IXP43x, where the MDIO bus is on NPE-C,
and the phy-handles point from one Ethernet device in the device tree
to the other. It is not unknown, but it is unusual, so giving an
example is good.

Also, looking at the unmodified driver, there is the global variable
mdio_bus. This should contain the one MDIO bus for the cluster. With
the C code, it should be impossible for multiple devices to
instantiate an MDIO bus. But with device tree, is that still true?
Should there be validation that only one device has an MDIO bus in its
device tree?

       Andrew
Rob Herring (Arm) April 23, 2021, 5:58 p.m. UTC | #2
On Fri, Apr 23, 2021 at 10:22:06AM +0200, Linus Walleij wrote:
> This adds device tree bindings for the IXP4xx ethernet

> controller with optional MDIO bridge.

> 

> Cc: Zoltan HERPAI <wigyori@uid0.hu>

> Cc: Raylynn Knight <rayknight@me.com>

> Cc: devicetree@vger.kernel.org

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

> ---

> ChangeLog v2->v3:

> - Designate phy nodes with ethernet-phy@

> - Include phy-mode in the schema

> ChangeLog v1->v2:

> - Add schema for the (optional) embedded MDIO bus inside

>   the ethernet controller in an "mdio" node instead of just

>   letting the code randomly populate and present it to

>   the operating system.

> - Reference the standard schemas for ethernet controller and

>   MDIO buses.

> - Add intel,npe to indentify the NPE unit used with each

>   ethernet adapter.

> ---

>  .../bindings/net/intel,ixp4xx-ethernet.yaml   | 82 +++++++++++++++++++

>  1 file changed, 82 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml

> 

> diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml

> new file mode 100644

> index 000000000000..978e7f236f3a

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml

> @@ -0,0 +1,82 @@

> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

> +# Copyright 2018 Linaro Ltd.

> +%YAML 1.2

> +---

> +$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#"

> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"

> +

> +title: Intel IXP4xx ethernet

> +

> +allOf:

> +  - $ref: "ethernet-controller.yaml#"

> +

> +maintainers:

> +  - Linus Walleij <linus.walleij@linaro.org>

> +

> +description: |

> +  The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network

> +  Processing Engine) and the IXP4xx Queue Mangager to process


typo

> +  the ethernet frames. It can optionally contain an MDIO bus to

> +  talk to PHYs.

> +

> +properties:

> +  compatible:

> +    const: intel,ixp4xx-ethernet

> +

> +  reg:

> +    maxItems: 1

> +    description: Ethernet MMIO address range

> +

> +  queue-rx:

> +    $ref: '/schemas/types.yaml#/definitions/phandle-array'

> +    maxItems: 1

> +    description: phandle to the RX queue on the NPE

> +

> +  queue-txready:

> +    $ref: '/schemas/types.yaml#/definitions/phandle-array'

> +    maxItems: 1

> +    description: phandle to the TX READY queue on the NPE

> +

> +  phy-mode: true

> +

> +  phy-handle: true

> +

> +  intel,npe:

> +    $ref: /schemas/types.yaml#/definitions/uint32

> +    enum: [0, 1, 2, 3]

> +    description: which NPE (Network Processing Engine) this ethernet

> +      instance is using


Is there a node for the NPE? If so, make this a phandle.

> +

> +  mdio:

> +    type: object

> +    $ref: "mdio.yaml#"

> +    description: optional node for embedded MDIO controller

> +

> +required:

> +  - compatible

> +  - reg

> +  - queue-rx

> +  - queue-txready

> +

> +additionalProperties: false

> +

> +examples:

> +  - |

> +    ethernet@c8009000 {

> +      compatible = "intel,ixp4xx-ethernet";

> +      reg = <0xc8009000 0x1000>;

> +      status = "disabled";

> +      queue-rx = <&qmgr 3>;

> +      queue-txready = <&qmgr 20>;

> +      intel,npe = <1>;

> +      phy-mode = "rgmii";

> +      phy-handle = <&phy1>;

> +

> +      mdio {

> +        #address-cells = <1>;

> +        #size-cells = <0>;

> +        phy1: ethernet-phy@1 {

> +          reg = <1>;

> +        };

> +      };

> +    };

> -- 

> 2.29.2

>
Andrew Lunn April 25, 2021, 12:37 a.m. UTC | #3
On Sun, Apr 25, 2021 at 02:24:26AM +0200, Linus Walleij wrote:
> On Fri, Apr 23, 2021 at 4:49 PM Andrew Lunn <andrew@lunn.ch> wrote:

> 

> > (...) it should be impossible for multiple devices to

> > instantiate an MDIO bus. But with device tree, is that still true?

> > Should there be validation that only one device has an MDIO bus in its

> > device tree?

> 

> This would be more of a question to Rob.


Hi Linus

Sorry. I was thinking C code. The driver already has the global
variable mdio_bus. It is initially a NULL pointer. It gets sent when
the first MDIO bus driver probes. If it is not NULL when an MDIO bus
driver probes, throw an error.

       Andrew
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
new file mode 100644
index 000000000000..978e7f236f3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -0,0 +1,82 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx ethernet
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Mangager to process
+  the ethernet frames. It can optionally contain an MDIO bus to
+  talk to PHYs.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-ethernet
+
+  reg:
+    maxItems: 1
+    description: Ethernet MMIO address range
+
+  queue-rx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the RX queue on the NPE
+
+  queue-txready:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the TX READY queue on the NPE
+
+  phy-mode: true
+
+  phy-handle: true
+
+  intel,npe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: which NPE (Network Processing Engine) this ethernet
+      instance is using
+
+  mdio:
+    type: object
+    $ref: "mdio.yaml#"
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - queue-rx
+  - queue-txready
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@c8009000 {
+      compatible = "intel,ixp4xx-ethernet";
+      reg = <0xc8009000 0x1000>;
+      status = "disabled";
+      queue-rx = <&qmgr 3>;
+      queue-txready = <&qmgr 20>;
+      intel,npe = <1>;
+      phy-mode = "rgmii";
+      phy-handle = <&phy1>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy1: ethernet-phy@1 {
+          reg = <1>;
+        };
+      };
+    };