| Message ID | 1619005442-16485-2-git-send-email-rkambl@codeaurora.org |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: qcom: Add device node support for TSENS in SC7280. | expand |
On Wed, Apr 21, 2021 at 05:14:01PM +0530, Rajeshwari wrote: > Subject: ARM: dts: qcom: Add device node support for TSENS in The most important thing this patch does is to add the thermal zones, this should be reflected in the subject. Not strictly necessary, but I'd suggest a separate patch to add the TSENS nodes and then one for the thermal zones. > > Add TSENS node, user thermal zone configurations, critical interrupt > and cooling maps for TSENS in SC7280. > > Signed-off-by: Rajeshwari <rkambl@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sc7280.dtsi | 874 +++++++++++++++++++++++++++++++++++ > 1 file changed, 874 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi > index 2cc4785..05b6cd7 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi > @@ -12,6 +12,7 @@ > #include <dt-bindings/power/qcom-aoss-qmp.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > +#include <dt-bindings/thermal/thermal.h> > > / { > interrupt-parent = <&intc>; > @@ -70,6 +71,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_0>; > + #cooling-cells = <2>; > L2_0: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -88,6 +90,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_100>; > + #cooling-cells = <2>; > L2_100: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -103,6 +106,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_200>; > + #cooling-cells = <2>; > L2_200: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -118,6 +122,7 @@ > &LITTLE_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_300>; > + #cooling-cells = <2>; > L2_300: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -133,6 +138,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_400>; > + #cooling-cells = <2>; > L2_400: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -148,6 +154,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_500>; > + #cooling-cells = <2>; > L2_500: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -163,6 +170,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_600>; > + #cooling-cells = <2>; > L2_600: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -178,6 +186,7 @@ > &BIG_CPU_SLEEP_1 > &CLUSTER_SLEEP_0>; > next-level-cache = <&L2_700>; > + #cooling-cells = <2>; > L2_700: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -825,6 +834,28 @@ > interrupt-controller; > }; > > + tsens0: thermal-sensor@c263000 { > + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; > + reg = <0 0x0c263000 0 0x1ff>, /* TM */ > + <0 0x0c222000 0 0x1ff>; /* SROT */ > + #qcom,sensors = <15>; > + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow","critical"; > + #thermal-sensor-cells = <1>; > + }; > + > + tsens1: thermal-sensor@c265000 { > + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; > + reg = <0 0x0c265000 0 0x1ff>, /* TM */ > + <0 0x0c223000 0 0x1ff>; /* SROT */ > + #qcom,sensors = <12>; > + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow","critical"; > + #thermal-sensor-cells = <1>; > + }; > + > aoss_qmp: power-controller@c300000 { > compatible = "qcom,sc7280-aoss-qmp"; > reg = <0 0x0c300000 0 0x100000>; > @@ -1118,6 +1149,849 @@ > }; > }; > > + thermal_zones: thermal-zones { > + cpu0-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 1>; > + > + trips { > + cpu0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu0_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu0_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; not super-important, but is a hysteresis actually needed for a critical trip point? The system is supposed to shut down when the critical trip point is reached, so I'd expect that the hysteresis doesn't do anything. > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu0_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu0_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu1-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 2>; > + > + trips { > + cpu1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu1_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu1_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu1_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu1_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu2-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 3>; > + > + trips { > + cpu2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu2_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu2_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu2_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu2_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu3-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 4>; > + > + trips { > + cpu3_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu3_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu3_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu3_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu3_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu4-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 7>; > + > + trips { > + cpu4_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu4_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu4_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu5-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 8>; > + > + trips { > + cpu5_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu5_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu5_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu6-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 9>; > + > + trips { > + cpu6_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu6_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu6_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu7-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 10>; > + > + trips { > + cpu7_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu7_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu7_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu8-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 11>; > + > + trips { > + cpu8_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu8_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu8_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu8_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu8_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu9-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 12>; > + > + trips { > + cpu9_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu9_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu9_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu9_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu9_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu10-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 13>; > + > + trips { > + cpu10_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu10_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu10_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu10_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu10_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu11-thermal { > + polling-delay-passive = <250>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 14>; > + > + trips { > + cpu11_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu11_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu11_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu11_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu11_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + aoss0-thermal { Also not super-important, but I wonder what the order of the thermal zones should be. Currently this seems to be a mix of 'most important first', group certain things and order by sensor ID. My initial suggestion would be to use alphabetical order, though that would put a few 'less important' zones before the CPUs. An possible alternative could be 'CPUs first' followed by alphabetical order. In any case, it's not really important, just wondered if there should be a specific ordering. If you keep more or less the current order then it seems the aoss0 and aoss1 should be grouped together. > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 0>; > + > + trips { > + aoss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + aoss0_crit: aoss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpuss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 5>; > + > + trips { > + cpuss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + cpuss0_crit: cluster0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cpuss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens0 6>; > + > + trips { > + cpuss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + cpuss1_crit: cluster0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + gpuss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 1>; > + > + trips { > + gpuss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + gpuss0_crit: gpuss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + gpuss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 2>; > + > + trips { > + gpuss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + gpuss1_crit: gpuss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + aoss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 0>; > + > + trips { > + aoss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + aoss1_crit: aoss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + nspss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 3>; > + > + trips { > + nspss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + nspss0_crit: nspss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + nspss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 4>; > + > + trips { > + nspss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + nspss1_crit: nspss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + video-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 5>; > + > + trips { > + video_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + video_crit: video_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + ddr-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 6>; > + > + trips { > + ddr_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + ddr_crit: ddr_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 7>; > + > + trips { > + mdmss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss0_crit: mdmss0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss1-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 8>; > + > + trips { > + mdmss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss1_crit: mdmss1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss2-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 9>; > + > + trips { > + mdmss2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss2_crit: mdmss2_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + mdmss3-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 10>; > + > + trips { > + mdmss3_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + mdmss3_crit: mdmss3_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + camera0-thermal { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + > + thermal-sensors = <&tsens1 11>; > + > + trips { > + camera0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + > + camera0_crit: camera0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > timer { > compatible = "arm,armv8-timer"; > interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, > -- > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member > of Code Aurora Forum, hosted by The Linux Foundation >
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 2cc4785..05b6cd7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -70,6 +71,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -88,6 +90,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_100>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -103,6 +106,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_200>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -118,6 +122,7 @@ &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_300>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -133,6 +138,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_400>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -148,6 +154,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_500>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -163,6 +170,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_600>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -178,6 +186,7 @@ &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; next-level-cache = <&L2_700>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -825,6 +834,28 @@ interrupt-controller; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <15>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sc7280-tsens","qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <12>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow","critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sc7280-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; @@ -1118,6 +1149,849 @@ }; }; + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu8-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu8_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu8_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu8_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu8_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu9-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu9_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu9_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu9_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu9_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu10-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu10_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu10_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu10_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu10_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu11-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu11_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu11_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu11_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu11_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss0_crit: aoss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 5>; + + trips { + cpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens0 6>; + + trips { + cpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cpuss1_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpuss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpuss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss0_crit: gpuss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpuss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpuss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + gpuss1_crit: gpuss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + aoss1_crit: aoss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + nspss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 3>; + + trips { + nspss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss0_crit: nspss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + nspss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 4>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + nspss1_crit: nspss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 5>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + video_crit: video_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 6>; + + trips { + ddr_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + ddr_crit: ddr_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 7>; + + trips { + mdmss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss0_crit: mdmss0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss1-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 8>; + + trips { + mdmss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss1_crit: mdmss1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss2-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 9>; + + trips { + mdmss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss2_crit: mdmss2_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + mdmss3-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 10>; + + trips { + mdmss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + mdmss3_crit: mdmss3_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + camera0-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&tsens1 11>; + + trips { + camera0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + + camera0_crit: camera0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
Add TSENS node, user thermal zone configurations, critical interrupt and cooling maps for TSENS in SC7280. Signed-off-by: Rajeshwari <rkambl@codeaurora.org> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 874 +++++++++++++++++++++++++++++++++++ 1 file changed, 874 insertions(+)