diff mbox series

[5.10,096/103] r8169: dont advertise pause in jumbo mode

Message ID 20210419130531.086618533@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman April 19, 2021, 1:06 p.m. UTC
From: Heiner Kallweit <hkallweit1@gmail.com>

[ Upstream commit 453a77894efa4d9b6ef9644d74b9419c47ac427c ]

It has been reported [0] that using pause frames in jumbo mode impacts
performance. There's no available chip documentation, but vendor
drivers r8168 and r8125 don't advertise pause in jumbo mode. So let's
do the same, according to Roman it fixes the issue.

[0] https://bugzilla.kernel.org/show_bug.cgi?id=212617

Fixes: 9cf9b84cc701 ("r8169: make use of phy_set_asym_pause")
Reported-by: Roman Mamedov <rm+bko@romanrm.net>
Tested-by: Roman Mamedov <rm+bko@romanrm.net>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/realtek/r8169_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index f981aa899c82..3bb36f4a984e 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -2420,6 +2420,13 @@  static void rtl_jumbo_config(struct rtl8169_private *tp)
 
 	if (pci_is_pcie(tp->pci_dev) && tp->supports_gmii)
 		pcie_set_readrq(tp->pci_dev, readrq);
+
+	/* Chip doesn't support pause in jumbo mode */
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+			 tp->phydev->advertising, !jumbo);
+	linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+			 tp->phydev->advertising, !jumbo);
+	phy_start_aneg(tp->phydev);
 }
 
 DECLARE_RTL_COND(rtl_chipcmd_cond)
@@ -4711,8 +4718,6 @@  static int r8169_phy_connect(struct rtl8169_private *tp)
 	if (!tp->supports_gmii)
 		phy_set_max_speed(phydev, SPEED_100);
 
-	phy_support_asym_pause(phydev);
-
 	phy_attached_info(phydev);
 
 	return 0;