| Message ID | 20210415111655.4273-1-zajec5@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | dt-bindings: thermal: brcm,ns-thermal: convert to the json-schema | expand |
On Thu, Apr 15, 2021 at 01:16:55PM +0200, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > This helps validating DTS files. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../bindings/thermal/brcm,ns-thermal.txt | 37 ------------ > .../bindings/thermal/brcm,ns-thermal.yaml | 59 +++++++++++++++++++ > 2 files changed, 59 insertions(+), 37 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt > create mode 100644 Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml > > diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt > deleted file mode 100644 > index 68e047170039..000000000000 > --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt > +++ /dev/null > @@ -1,37 +0,0 @@ > -* Broadcom Northstar Thermal > - > -This binding describes thermal sensor that is part of Northstar's DMU (Device > -Management Unit). > - > -Required properties: > -- compatible : Must be "brcm,ns-thermal" > -- reg : iomem address range of PVTMON registers > -- #thermal-sensor-cells : Should be <0> > - > -Example: > - > -thermal: thermal@1800c2c0 { > - compatible = "brcm,ns-thermal"; > - reg = <0x1800c2c0 0x10>; > - #thermal-sensor-cells = <0>; > -}; > - > -thermal-zones { > - cpu_thermal: cpu-thermal { > - polling-delay-passive = <0>; > - polling-delay = <1000>; > - coefficients = <(-556) 418000>; > - thermal-sensors = <&thermal>; > - > - trips { > - cpu-crit { > - temperature = <125000>; > - hysteresis = <0>; > - type = "critical"; > - }; > - }; > - > - cooling-maps { > - }; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml > new file mode 100644 > index 000000000000..50143e2f6bcb > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Broadcom Northstar Thermal > + > +maintainers: > + - Rafał Miłecki <rafal@milecki.pl> > + > +description: > + Thermal sensor that is part of Northstar's DMU (Device Management Unit). > + > +allOf: > + - $ref: thermal-sensor.yaml# > + > +properties: > + compatible: > + const: brcm,ns-thermal > + > + reg: > + description: PVTMON registers range How many? > + > + "#thermal-sensor-cells": > + const: 0 > + > +unevaluatedProperties: false > + > +required: > + - reg > + > +examples: > + - | > + thermal: thermal@1800c2c0 { > + compatible = "brcm,ns-thermal"; > + reg = <0x1800c2c0 0x10>; > + #thermal-sensor-cells = <0>; > + }; > + > + thermal-zones { > + cpu-thermal { > + polling-delay-passive = <0>; > + polling-delay = <1000>; > + coefficients = <(-556) 418000>; > + thermal-sensors = <&thermal>; > + > + trips { > + cpu-crit { > + temperature = <125000>; > + hysteresis = <0>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + }; > + }; > + }; > -- > 2.26.2 >
diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt deleted file mode 100644 index 68e047170039..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Broadcom Northstar Thermal - -This binding describes thermal sensor that is part of Northstar's DMU (Device -Management Unit). - -Required properties: -- compatible : Must be "brcm,ns-thermal" -- reg : iomem address range of PVTMON registers -- #thermal-sensor-cells : Should be <0> - -Example: - -thermal: thermal@1800c2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x1800c2c0 0x10>; - #thermal-sensor-cells = <0>; -}; - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - coefficients = <(-556) 418000>; - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - }; - }; -}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml new file mode 100644 index 000000000000..50143e2f6bcb --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Thermal + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + Thermal sensor that is part of Northstar's DMU (Device Management Unit). + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + const: brcm,ns-thermal + + reg: + description: PVTMON registers range + + "#thermal-sensor-cells": + const: 0 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + };