| Message ID | 20210412034237.2473017-2-dqfext@gmail.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [RFC,v4,net-next,1/4] net: phy: add MediaTek PHY driver | expand |
Hi Qingfang, Quoting DENG Qingfang <dqfext@gmail.com>: > Add support for MediaTek PHYs found in MT7530 and MT7531 switches. > The initialization procedure is from the vendor driver, but due to lack > of documentation, the function of some register values remains unknown. > > Signed-off-by: DENG Qingfang <dqfext@gmail.com> > --- > RFC v3 -> RFC v4: > - Remove unused include. > > drivers/net/phy/Kconfig | 5 ++ > drivers/net/phy/Makefile | 1 + > drivers/net/phy/mediatek.c | 111 +++++++++++++++++++++++++++++++++++++ > 3 files changed, 117 insertions(+) > create mode 100644 drivers/net/phy/mediatek.c > > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig > index a615b3660b05..edd858cec9ec 100644 > --- a/drivers/net/phy/Kconfig > +++ b/drivers/net/phy/Kconfig > @@ -207,6 +207,11 @@ config MARVELL_88X2222_PHY > Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet > Transceiver. > > +config MEDIATEK_PHY > + tristate "MediaTek PHYs" > + help > + Supports the MediaTek switch integrated PHYs. > + > config MICREL_PHY > tristate "Micrel PHYs" > help > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile > index de683e3abe63..9ed7dbab7770 100644 > --- a/drivers/net/phy/Makefile > +++ b/drivers/net/phy/Makefile > @@ -64,6 +64,7 @@ obj-$(CONFIG_LXT_PHY) += lxt.o > obj-$(CONFIG_MARVELL_10G_PHY) += marvell10g.o > obj-$(CONFIG_MARVELL_PHY) += marvell.o > obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o > +obj-$(CONFIG_MEDIATEK_PHY) += mediatek.o > obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o > obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o > obj-$(CONFIG_MICREL_PHY) += micrel.o > diff --git a/drivers/net/phy/mediatek.c b/drivers/net/phy/mediatek.c > new file mode 100644 > index 000000000000..1627b7c04345 > --- /dev/null > +++ b/drivers/net/phy/mediatek.c > @@ -0,0 +1,111 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +#include <linux/module.h> > +#include <linux/phy.h> > + > +#define MTK_EXT_PAGE_ACCESS 0x1f > +#define MTK_PHY_PAGE_STANDARD 0x0000 > +#define MTK_PHY_PAGE_EXTENDED 0x0001 > +#define MTK_PHY_PAGE_EXTENDED_2 0x0002 > +#define MTK_PHY_PAGE_EXTENDED_3 0x0003 > +#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30 > +#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 > + > +static int mtk_phy_read_page(struct phy_device *phydev) > +{ > + return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); > +} > + > +static int mtk_phy_write_page(struct phy_device *phydev, int page) > +{ > + return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page); > +} > + > +static void mtk_phy_config_init(struct phy_device *phydev) > +{ > + /* Disable EEE */ > + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); For my EEE patch I changed this line to: genphy_config_eee_advert(phydev); So PHY EEE part is setup properly at boot, instead enable it manual via ethtool. This function also takes the DTS parameters "eee-broken-xxxx" in to account while setting-up the PHY. > + > + /* Enable HW auto downshift */ > + phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4)); > + > + /* Increase SlvDPSready time */ > + phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); > + __phy_write(phydev, 0x10, 0xafae); > + __phy_write(phydev, 0x12, 0x2f); > + __phy_write(phydev, 0x10, 0x8fae); > + phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); > + > + /* Adjust 100_mse_threshold */ > + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff); > + > + /* Disable mcc */ > + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300); > +} > + Greats, René
On Tue, Apr 13, 2021 at 02:12:59PM +0100, Russell King - ARM Linux admin wrote: > On Tue, Apr 13, 2021 at 11:59:20AM +0800, DENG Qingfang wrote: > > Within 12 hours, I got some spontaneous link down/ups when EEE is enabled: > > > > [16334.236233] mt7530 mdio-bus:1f wan: Link is Down > > [16334.241340] br-lan: port 3(wan) entered disabled state > > [16337.355988] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx > > [16337.363468] br-lan: port 3(wan) entered blocking state > > [16337.368638] br-lan: port 3(wan) entered forwarding state > > > > The cable is a 30m Cat.6 and never has such issue when EEE is disabled. > > Perhaps WAKEUP_TIME_1000/100 or some PHY registers need to be fine-tuned, > > but for now I think it should be disabled by default. > > Experience with Atheros AR8035 which has a very similar issue would > suggest that before resorting to the blunt hammer of disabling > SmartEEE, one should definitely experiment with the 1G Tw settings. > > Using 24us for 1G speeds on AR8035 helps a great deal, whereas the PHY > defaults to 17us for 1G and 23us for 100M. I set the 1G Tw to maximum 255us and still got the link issue..
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index a615b3660b05..edd858cec9ec 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -207,6 +207,11 @@ config MARVELL_88X2222_PHY Support for the Marvell 88X2222 Dual-port Multi-speed Ethernet Transceiver. +config MEDIATEK_PHY + tristate "MediaTek PHYs" + help + Supports the MediaTek switch integrated PHYs. + config MICREL_PHY tristate "Micrel PHYs" help diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index de683e3abe63..9ed7dbab7770 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_LXT_PHY) += lxt.o obj-$(CONFIG_MARVELL_10G_PHY) += marvell10g.o obj-$(CONFIG_MARVELL_PHY) += marvell.o obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o +obj-$(CONFIG_MEDIATEK_PHY) += mediatek.o obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o obj-$(CONFIG_MICREL_PHY) += micrel.o diff --git a/drivers/net/phy/mediatek.c b/drivers/net/phy/mediatek.c new file mode 100644 index 000000000000..1627b7c04345 --- /dev/null +++ b/drivers/net/phy/mediatek.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include <linux/module.h> +#include <linux/phy.h> + +#define MTK_EXT_PAGE_ACCESS 0x1f +#define MTK_PHY_PAGE_STANDARD 0x0000 +#define MTK_PHY_PAGE_EXTENDED 0x0001 +#define MTK_PHY_PAGE_EXTENDED_2 0x0002 +#define MTK_PHY_PAGE_EXTENDED_3 0x0003 +#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30 +#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 + +static int mtk_phy_read_page(struct phy_device *phydev) +{ + return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); +} + +static int mtk_phy_write_page(struct phy_device *phydev, int page) +{ + return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page); +} + +static void mtk_phy_config_init(struct phy_device *phydev) +{ + /* Disable EEE */ + phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0); + + /* Enable HW auto downshift */ + phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4)); + + /* Increase SlvDPSready time */ + phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); + __phy_write(phydev, 0x10, 0xafae); + __phy_write(phydev, 0x12, 0x2f); + __phy_write(phydev, 0x10, 0x8fae); + phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); + + /* Adjust 100_mse_threshold */ + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff); + + /* Disable mcc */ + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300); +} + +static int mt7530_phy_config_init(struct phy_device *phydev) +{ + mtk_phy_config_init(phydev); + + /* Increase post_update_timer */ + phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b); + + return 0; +} + +static int mt7531_phy_config_init(struct phy_device *phydev) +{ + if (phydev->interface != PHY_INTERFACE_MODE_INTERNAL) + return -EINVAL; + + mtk_phy_config_init(phydev); + + /* PHY link down power saving enable */ + phy_set_bits(phydev, 0x17, BIT(4)); + phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300); + + /* Set TX Pair delay selection */ + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404); + phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404); + + return 0; +} + +static struct phy_driver mtk_phy_driver[] = { + { + PHY_ID_MATCH_EXACT(0x03a29412), + .name = "MediaTek MT7530 PHY", + .config_init = mt7530_phy_config_init, + /* Interrupts are handled by the switch, not the PHY + * itself. + */ + .config_intr = genphy_no_config_intr, + .handle_interrupt = genphy_handle_interrupt_no_ack, + .read_page = mtk_phy_read_page, + .write_page = mtk_phy_write_page, + }, + { + PHY_ID_MATCH_EXACT(0x03a29441), + .name = "MediaTek MT7531 PHY", + .config_init = mt7531_phy_config_init, + /* Interrupts are handled by the switch, not the PHY + * itself. + */ + .config_intr = genphy_no_config_intr, + .handle_interrupt = genphy_handle_interrupt_no_ack, + .read_page = mtk_phy_read_page, + .write_page = mtk_phy_write_page, + }, +}; + +module_phy_driver(mtk_phy_driver); + +static struct mdio_device_id __maybe_unused mtk_phy_tbl[] = { + { PHY_ID_MATCH_VENDOR(0x03a29400) }, + { } +}; + +MODULE_DESCRIPTION("MediaTek switch integrated PHY driver"); +MODULE_AUTHOR("DENG, Qingfang <dqfext@gmail.com>"); +MODULE_LICENSE("GPL"); + +MODULE_DEVICE_TABLE(mdio, mtk_phy_tbl);
Add support for MediaTek PHYs found in MT7530 and MT7531 switches. The initialization procedure is from the vendor driver, but due to lack of documentation, the function of some register values remains unknown. Signed-off-by: DENG Qingfang <dqfext@gmail.com> --- RFC v3 -> RFC v4: - Remove unused include. drivers/net/phy/Kconfig | 5 ++ drivers/net/phy/Makefile | 1 + drivers/net/phy/mediatek.c | 111 +++++++++++++++++++++++++++++++++++++ 3 files changed, 117 insertions(+) create mode 100644 drivers/net/phy/mediatek.c