deleted file mode 100644
@@ -1,280 +0,0 @@
-* AB8500 Multi-Functional Device (MFD)
-
-Required parent device properties:
-- compatible : contains "stericsson,ab8500" or "stericsson,ab8505";
-- interrupts : contains the IRQ line for the AB8500
-- interrupt-controller : describes the AB8500 as an Interrupt Controller (has its own domain)
-- #interrupt-cells : should be 2, for 2-cell format
- - The first cell is the AB8500 local IRQ number
- - The second cell is used to specify optional parameters
- - bits[3:0] trigger type and level flags:
- 1 = low-to-high edge triggered
- 2 = high-to-low edge triggered
- 4 = active high level-sensitive
- 8 = active low level-sensitive
-
-The AB8500 consists of a large and varied group of sub-devices:
-
-Device IRQ Names Supply Names Description
------- --------- ------------ -----------
-ab8500-bm : : : Battery Manager
-ab8500-btemp : : : Battery Temperature
-ab8500-charger : : : Battery Charger
-ab8500-codec : : : Audio Codec
-ab8500-fg : : vddadc : Fuel Gauge
- : NCONV_ACCU : : Accumulate N Sample Conversion
- : BATT_OVV : : Battery Over Voltage
- : LOW_BAT_F : : LOW threshold battery voltage
- : CC_INT_CALIB : : Coulomb Counter Internal Calibration
- : CCEOC : : Coulomb Counter End of Conversion
-ab8500-btemp : : vtvout : Battery Temperature
- : BAT_CTRL_INDB : : Battery Removal Indicator
- : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
- : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
- : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
- : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
-ab8500-charger : : vddadc : Charger interface
- : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
- : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
- : MAIN_EXT_CH_NOT_OK : : main charger not OK
- : MAIN_CH_TH_PROT_R : : Die temp is above main charger
- : MAIN_CH_TH_PROT_F : : Die temp is below main charger
- : VBUS_DET_F : : VBUS falling detected
- : VBUS_DET_R : : VBUS rising detected
- : USB_LINK_STATUS : : USB link status has changed
- : USB_CH_TH_PROT_R : : Die temp is above usb charger
- : USB_CH_TH_PROT_F : : Die temp is below usb charger
- : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection
- : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped)
- : CH_WD_EXP : : Charger watchdog detected
-ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
- SW_CONV_END : :
-ab8500-gpio : : : GPIO Controller (AB8500)
-ab8505-gpio : : : GPIO Controller (AB8505)
-ab8500-ponkey : ONKEY_DBF : : Power-on Key
- ONKEY_DBR : :
-ab8500-pwm : : : Pulse Width Modulator
-ab8500-regulator : : : Regulators (AB8500)
-ab8505-regulator : : : Regulators (AB8505)
-ab8500-rtc : 60S : : Real Time Clock
- : ALARM : :
-ab8500-sysctrl : : : System Control
-ab8500-usb : ID_WAKEUP_R : vddulpivio18 : Universal Serial Bus
- : ID_WAKEUP_F : v-ape :
- : VBUS_DET_F : musb_1v8 :
- : VBUS_DET_R : :
- : USB_LINK_STATUS : :
- : USB_ADP_PROBE_PLUG : :
- : USB_ADP_PROBE_UNPLUG : :
-
-Required child device properties:
-- compatible : "stericsson,ab8500-[bm|btemp|charger|fg|gpadc|gpio|ponkey|
- pwm|regulator|rtc|sysctrl|usb]";
-
- A few child devices require ADC channels from the GPADC node. Those follow the
- standard bindings from iio/iio-bindings.txt and iio/adc/adc.txt
-
- abx500-temp : io-channels "aux1" and "aux2" for measuring external
- temperatures.
- ab8500-fg : io-channel "main_bat_v" for measuring main battery voltage,
- ab8500-btemp : io-channels "btemp_ball" and "bat_ctrl" for measuring the
- battery voltage.
- ab8500-charger : io-channels "main_charger_v", "main_charger_c", "vbus_v",
- "usb_charger_c" for measuring voltage and current of the
- different charging supplies.
-
-Optional child device properties:
-- interrupts : contains the device IRQ(s) using the 2-cell format (see above)
-- interrupt-names : contains names of IRQ resource in the order in which they were
- supplied in the interrupts property
-- <supply_name>-supply : contains a phandle to the regulator supply node in Device Tree
-
-Non-standard child device properties:
- - Audio CODEC:
- - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential)
- - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
- - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic
- - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
- - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-
-ab8500 {
- compatible = "stericsson,ab8500";
- interrupts = <0 40 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- ab8500-rtc {
- compatible = "stericsson,ab8500-rtc";
- interrupts = <17 0x4
- 18 0x4>;
- interrupt-names = "60S", "ALARM";
- };
-
- ab8500-gpadc {
- compatible = "stericsson,ab8500-gpadc";
- interrupts = <32 0x4
- 39 0x4>;
- interrupt-names = "HW_CONV_END", "SW_CONV_END";
- vddadc-supply = <&ab8500_ldo_tvout_reg>;
- #address-cells = <1>;
- #size-cells = <0>;
- #io-channel-cells = <1>;
-
- /* GPADC channels */
- bat_ctrl: channel@1 {
- reg = <0x01>;
- };
- btemp_ball: channel@2 {
- reg = <0x02>;
- };
- main_charger_v: channel@3 {
- reg = <0x03>;
- };
- acc_detect1: channel@4 {
- reg = <0x04>;
- };
- acc_detect2: channel@5 {
- reg = <0x05>;
- };
- adc_aux1: channel@6 {
- reg = <0x06>;
- };
- adc_aux2: channel@7 {
- reg = <0x07>;
- };
- main_batt_v: channel@8 {
- reg = <0x08>;
- };
- vbus_v: channel@9 {
- reg = <0x09>;
- };
- main_charger_c: channel@a {
- reg = <0x0a>;
- };
- usb_charger_c: channel@b {
- reg = <0x0b>;
- };
- bk_bat_v: channel@c {
- reg = <0x0c>;
- };
- die_temp: channel@d {
- reg = <0x0d>;
- };
- usb_id: channel@e {
- reg = <0x0e>;
- };
- xtal_temp: channel@12 {
- reg = <0x12>;
- };
- vbat_true_meas: channel@13 {
- reg = <0x13>;
- };
- bat_ctrl_and_ibat: channel@1c {
- reg = <0x1c>;
- };
- vbat_meas_and_ibat: channel@1d {
- reg = <0x1d>;
- };
- vbat_true_meas_and_ibat: channel@1e {
- reg = <0x1e>;
- };
- bat_temp_and_ibat: channel@1f {
- reg = <0x1f>;
- };
- };
-
- ab8500_temp {
- compatible = "stericsson,abx500-temp";
- io-channels = <&gpadc 0x06>,
- <&gpadc 0x07>;
- io-channel-name = "aux1", "aux2";
- };
-
- ab8500_battery: ab8500_battery {
- stericsson,battery-type = "LIPO";
- thermistor-on-batctrl;
- };
-
- ab8500_fg {
- compatible = "stericsson,ab8500-fg";
- battery = <&ab8500_battery>;
- io-channels = <&gpadc 0x08>;
- io-channel-name = "main_bat_v";
- };
-
- ab8500_btemp {
- compatible = "stericsson,ab8500-btemp";
- battery = <&ab8500_battery>;
- io-channels = <&gpadc 0x02>,
- <&gpadc 0x01>;
- io-channel-name = "btemp_ball",
- "bat_ctrl";
- };
-
- ab8500_charger {
- compatible = "stericsson,ab8500-charger";
- battery = <&ab8500_battery>;
- vddadc-supply = <&ab8500_ldo_tvout_reg>;
- io-channels = <&gpadc 0x03>,
- <&gpadc 0x0a>,
- <&gpadc 0x09>,
- <&gpadc 0x0b>;
- io-channel-name = "main_charger_v",
- "main_charger_c",
- "vbus_v",
- "usb_charger_c";
- };
-
- ab8500-usb {
- compatible = "stericsson,ab8500-usb";
- interrupts = < 90 0x4
- 96 0x4
- 14 0x4
- 15 0x4
- 79 0x4
- 74 0x4
- 75 0x4>;
- interrupt-names = "ID_WAKEUP_R",
- "ID_WAKEUP_F",
- "VBUS_DET_F",
- "VBUS_DET_R",
- "USB_LINK_STATUS",
- "USB_ADP_PROBE_PLUG",
- "USB_ADP_PROBE_UNPLUG";
- vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
- v-ape-supply = <&db8500_vape_reg>;
- musb_1v8-supply = <&db8500_vsmps2_reg>;
- };
-
- ab8500-ponkey {
- compatible = "stericsson,ab8500-ponkey";
- interrupts = <6 0x4
- 7 0x4>;
- interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
- };
-
- ab8500-sysctrl {
- compatible = "stericsson,ab8500-sysctrl";
- };
-
- ab8500-pwm {
- compatible = "stericsson,ab8500-pwm";
- };
-
- codec: ab8500-codec {
- compatible = "stericsson,ab8500-codec";
-
- stericsson,earpeice-cmv = <950>; /* Units in mV. */
- };
-
- ab8500-regulators {
- compatible = "stericsson,ab8500-regulator";
-
- ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
- /*
- * See: Documentation/devicetree/bindings/regulator/regulator.txt
- * for more information on regulators
- */
- };
- };
-};
new file mode 100644
@@ -0,0 +1,696 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mfd/stericsson,ab8500.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: AB8500 Multi-Functional Device
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+ - Lee Jones <lee.jones@linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - stericsson,ab8500
+ - stericsson,ab8505
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ description: First cell is IRQ number, second cell is flags
+ const: 2
+
+ clock-controller:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-clk
+
+ "#clock-cells":
+ const: 1
+
+ required:
+ - compatible
+ - "#clock-cells"
+
+ additionalProperties: false
+
+ ab8500-rtc:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-rtc
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: 60S
+ - const: ALARM
+
+ required:
+ - compatible
+ - interrupts
+ - interrupt-names
+
+ additionalProperties: false
+
+ ab8500-gpadc:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-gpadc
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ anyOf:
+ - const: HW_CONV_END
+ - const: SW_CONV_END
+
+ vddadc-supply:
+ description: analog supply
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#io-channel-cells":
+ const: 1
+
+ required:
+ - compatible
+
+ patternProperties:
+ "^channel@[0-9a-f]+$":
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+ additionalProperties: false
+
+ ab8500_temp:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,abx500-temp
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ items:
+ - const: ABX500_TEMP_WARM
+
+ io-channels:
+ maxItems: 2
+
+ io-channel-names:
+ items:
+ - const: aux1
+ - const: aux2
+
+ required:
+ - compatible
+
+ additionalProperties: false
+
+ ab8500_btemp:
+ type: object
+ $ref: ../power/supply/stericsson,ab8500-btemp.yaml
+
+ ab8500_charger:
+ type: object
+ $ref: ../power/supply/stericsson,ab8500-charger.yaml
+
+ ab8500_fg:
+ type: object
+ $ref: ../power/supply/stericsson,ab8500-fg.yaml
+
+ ab8500_chargalg:
+ type: object
+ $ref: ../power/supply/stericsson,ab8500-chargalg.yaml
+
+ ab8500_battery:
+ type: object
+ properties:
+ stericsson,battery-type:
+ description: battery chemistry
+ enum:
+ - UNKNOWN
+ - NiMH
+ - LION
+ - LIPO
+ - LiFe
+ - NiCd
+ - LiMn
+
+ thermistor-on-batctrl:
+ type: boolean
+ description:
+ if set 'batctrl' is used for thermal measurement, otherwise 'btemp'
+ is used for thermal measurement.
+
+ additionalProperties: false
+
+ ab8500_usb:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-usb
+
+ interrupts:
+ maxItems: 7
+
+ interrupt-names:
+ items:
+ - const: ID_WAKEUP_R
+ - const: ID_WAKEUP_F
+ - const: VBUS_DET_F
+ - const: VBUS_DET_R
+ - const: USB_LINK_STATUS
+ - const: USB_ADP_PROBE_PLUG
+ - const: USB_ADP_PROBE_UNPLUG
+
+ vddulpivio18-supply:
+ description: 1.8V VIO
+
+ v-ape-supply:
+ description: V-APE
+
+ musb_1v8-supply:
+ description: MUSB 1.8V
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: sysclk
+
+ additionalProperties: false
+
+ ab8500-ponkey:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-poweron-key
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: ONKEY_DBF
+ - const: ONKEY_DBR
+
+ additionalProperties: false
+
+ ab8500-sysctrl:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-sysctrl
+
+ additionalProperties: false
+
+ ab8500-debugfs:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-debug
+
+ additionalProperties: false
+
+ ab8500-codec:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-codec
+
+ V-AUD-supply:
+ description: V-AUD supply
+
+ V-AMIC1-supply:
+ description: V-AMIC1 supply
+
+ V-AMIC2-supply:
+ description: V-AMIC2 supply
+
+ V-DMIC-supply:
+ description: V-DMIC supply
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: audioclk
+
+ stericsson,earpeice-cmv:
+ description: earpiece voltage in mV
+ enum: [950, 1100, 1270, 1580]
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ additionalProperties: false
+
+ ab8500-ext-regulators:
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-ext-regulator
+
+ patternProperties:
+ "^ab8500_ext[1-3]$":
+ $ref: /schemas/regulator/regulator.yaml
+
+ additionalProperties: false
+
+patternProperties:
+ "^ab8500-pwm(-[1-3])?$":
+ type: object
+ properties:
+ compatible:
+ const: stericsson,ab8500-pwm
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: intclk
+
+ additionalProperties: false
+ "^ab850[05]-gpiocontroller$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - stericsson,ab8500-gpio
+ - stericsson,ab8505-gpio
+ - stericsson,ab8540-gpio
+ - stericsson,ab9540-gpio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ required:
+ - compatible
+ - gpio-controller
+ - "#gpio-cells"
+
+ patternProperties:
+ "^.*$":
+ $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+ additionalProperties: false
+
+ "^ab850[05]-regulators$":
+ type: object
+ properties:
+ compatible:
+ enum:
+ - stericsson,ab8500-regulator
+ - stericsson,ab8505-regulator
+
+ vin-supply:
+ description: input supply
+
+ patternProperties:
+ "^ab8500_ldo_adc$|^ab8500_ldo_aux[1-8]$|^ab8500_ldo_intcore$|^ab8500_ldo_tvout$|^ab8500_ldo_audio$|^ab8500_ldo_anamic[12]$|^ab8500_ldo_dmic$|^ab8500_ldo_ana$":
+ $ref: /schemas/regulator/regulator.yaml
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mfd/dbx500-prcmu.h>
+ #include <dt-bindings/clock/ste-ab8500.h>
+ ab8500 {
+ compatible = "stericsson,ab8500";
+ interrupt-parent = <&intc>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ ab8500_clock: clock-controller {
+ compatible = "stericsson,ab8500-clk";
+ #clock-cells = <1>;
+ };
+
+ ab8500_gpio: ab8500-gpiocontroller {
+ compatible = "stericsson,ab8500-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ ab8500-rtc {
+ compatible = "stericsson,ab8500-rtc";
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+ <18 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "60S", "ALARM";
+ };
+
+ gpadc: ab8500-gpadc {
+ compatible = "stericsson,ab8500-gpadc";
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
+ <39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "HW_CONV_END", "SW_CONV_END";
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+
+ /* GPADC channels */
+ bat_ctrl: channel@1 {
+ reg = <0x01>;
+ };
+ btemp_ball: channel@2 {
+ reg = <0x02>;
+ };
+ main_charger_v: channel@3 {
+ reg = <0x03>;
+ };
+ acc_detect1: channel@4 {
+ reg = <0x04>;
+ };
+ acc_detect2: channel@5 {
+ reg = <0x05>;
+ };
+ adc_aux1: channel@6 {
+ reg = <0x06>;
+ };
+ adc_aux2: channel@7 {
+ reg = <0x07>;
+ };
+ main_batt_v: channel@8 {
+ reg = <0x08>;
+ };
+ vbus_v: channel@9 {
+ reg = <0x09>;
+ };
+ main_charger_c: channel@a {
+ reg = <0x0a>;
+ };
+ usb_charger_c: channel@b {
+ reg = <0x0b>;
+ };
+ bk_bat_v: channel@c {
+ reg = <0x0c>;
+ };
+ die_temp: channel@d {
+ reg = <0x0d>;
+ };
+ usb_id: channel@e {
+ reg = <0x0e>;
+ };
+ xtal_temp: channel@12 {
+ reg = <0x12>;
+ };
+ vbat_true_meas: channel@13 {
+ reg = <0x13>;
+ };
+ bat_ctrl_and_ibat: channel@1c {
+ reg = <0x1c>;
+ };
+ vbat_meas_and_ibat: channel@1d {
+ reg = <0x1d>;
+ };
+ vbat_true_meas_and_ibat: channel@1e {
+ reg = <0x1e>;
+ };
+ bat_temp_and_ibat: channel@1f {
+ reg = <0x1f>;
+ };
+ };
+
+ ab8500_temp {
+ compatible = "stericsson,abx500-temp";
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ABX500_TEMP_WARM";
+ io-channels = <&gpadc 0x06>,
+ <&gpadc 0x07>;
+ io-channel-names = "aux1", "aux2";
+ };
+
+ ab8500_battery: ab8500_battery {
+ stericsson,battery-type = "LIPO";
+ thermistor-on-batctrl;
+ };
+
+ ab8500_fg {
+ compatible = "stericsson,ab8500-fg";
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <8 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "NCONV_ACCU",
+ "BATT_OVV",
+ "LOW_BAT_F",
+ "CC_INT_CALIB",
+ "CCEOC";
+ battery = <&ab8500_battery>;
+ io-channels = <&gpadc 0x08>;
+ io-channel-names = "main_bat_v";
+ };
+
+ ab8500_btemp {
+ compatible = "stericsson,ab8500-btemp";
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "BAT_CTRL_INDB",
+ "BTEMP_LOW",
+ "BTEMP_HIGH",
+ "BTEMP_LOW_MEDIUM",
+ "BTEMP_MEDIUM_HIGH";
+ battery = <&ab8500_battery>;
+ io-channels = <&gpadc 0x02>,
+ <&gpadc 0x01>;
+ io-channel-names = "btemp_ball",
+ "bat_ctrl";
+ };
+
+ ab8500_charger {
+ compatible = "stericsson,ab8500-charger";
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 IRQ_TYPE_LEVEL_HIGH>,
+ <107 IRQ_TYPE_LEVEL_HIGH>,
+ <106 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <105 IRQ_TYPE_LEVEL_HIGH>,
+ <104 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>,
+ <21 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "MAIN_CH_UNPLUG_DET",
+ "MAIN_CHARGE_PLUG_DET",
+ "MAIN_EXT_CH_NOT_OK",
+ "MAIN_CH_TH_PROT_R",
+ "MAIN_CH_TH_PROT_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_CH_TH_PROT_R",
+ "USB_CH_TH_PROT_F",
+ "USB_CHARGER_NOT_OKR",
+ "VBUS_OVV",
+ "CH_WD_EXP",
+ "VBUS_CH_DROP_END";
+ battery = <&ab8500_battery>;
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ io-channels = <&gpadc 0x03>,
+ <&gpadc 0x0a>,
+ <&gpadc 0x09>,
+ <&gpadc 0x0b>;
+ io-channel-names = "main_charger_v",
+ "main_charger_c",
+ "vbus_v",
+ "usb_charger_c";
+ };
+
+ ab8500_chargalg {
+ compatible = "stericsson,ab8500-chargalg";
+ battery = <&ab8500_battery>;
+ };
+
+ ab8500_usb {
+ compatible = "stericsson,ab8500-usb";
+ interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
+ <96 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <74 IRQ_TYPE_LEVEL_HIGH>,
+ <75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ID_WAKEUP_R",
+ "ID_WAKEUP_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_ADP_PROBE_PLUG",
+ "USB_ADP_PROBE_UNPLUG";
+ vddulpivio18-supply = <&ab8500_ldo_intcore_reg>;
+ v-ape-supply = <&db8500_vape_reg>;
+ musb_1v8-supply = <&db8500_vsmps2_reg>;
+ clocks = <&prcmu_clk PRCMU_SYSCLK>;
+ clock-names = "sysclk";
+ };
+
+ ab8500-ponkey {
+ compatible = "stericsson,ab8500-poweron-key";
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ONKEY_DBF", "ONKEY_DBR";
+ };
+
+ ab8500-sysctrl {
+ compatible = "stericsson,ab8500-sysctrl";
+ };
+
+ ab8500-pwm-1 {
+ compatible = "stericsson,ab8500-pwm";
+ clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+ clock-names = "intclk";
+ };
+
+ ab8500-pwm-2 {
+ compatible = "stericsson,ab8500-pwm";
+ clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+ clock-names = "intclk";
+ };
+
+ ab8500-pwm-3 {
+ compatible = "stericsson,ab8500-pwm";
+ clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+ clock-names = "intclk";
+ };
+
+ ab8500-debugfs {
+ compatible = "stericsson,ab8500-debug";
+ };
+
+ codec: ab8500-codec {
+ compatible = "stericsson,ab8500-codec";
+
+ V-AUD-supply = <&ab8500_ldo_audio_reg>;
+ V-AMIC1-supply = <&ab8500_ldo_anamic1_reg>;
+ V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>;
+ V-DMIC-supply = <&ab8500_ldo_dmic_reg>;
+
+ clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>;
+ clock-names = "audioclk";
+
+ stericsson,earpeice-cmv = <950>; /* Units in mV. */
+ };
+
+ ext_regulators: ab8500-ext-regulators {
+ compatible = "stericsson,ab8500-ext-regulator";
+
+ ab8500_ext1_reg: ab8500_ext1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ab8500_ext2_reg: ab8500_ext2 {
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ab8500_ext3_reg: ab8500_ext3 {
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+ };
+
+ ab8500-regulators {
+ compatible = "stericsson,ab8500-regulator";
+ vin-supply = <&ab8500_ext3_reg>;
+
+ // supplies to the display/camera
+ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+ /* BUG: If turned off MMC will be affected. */
+ regulator-always-on;
+ };
+
+ // supplies to the on-board eMMC
+ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for VAUX3; SDcard slots
+ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for v-intcore12; VINTCORE12 LDO
+ ab8500_ldo_intcore_reg: ab8500_ldo_intcore {
+ };
+
+ // supply for tvout; gpadc; TVOUT LDO
+ ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+ };
+
+ // supply for ab8500-vaudio; VAUDIO LDO
+ ab8500_ldo_audio_reg: ab8500_ldo_audio {
+ };
+
+ // supply for v-anamic1 VAMIC1 LDO
+ ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+ };
+
+ // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
+ ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 {
+ };
+
+ // supply for v-dmic; VDMIC LDO
+ ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+ };
+
+ // supply for U8500 CSI/DSI; VANA LDO
+ ab8500_ldo_ana_reg: ab8500_ldo_ana {
+ };
+ };
+ };
deleted file mode 100644
@@ -1,318 +0,0 @@
-ST Ericsson abx500 pinmux controller
-
-Required properties:
-- compatible: "stericsson,ab8500-gpio", "stericsson,ab8540-gpio",
- "stericsson,ab8505-gpio", "stericsson,ab9540-gpio",
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning of the
-phrase "pin configuration node".
-
-ST Ericsson's pin configuration nodes use the generic pin multiplexing
-and pin configuration bindings, see pinctrl-bindings.txt
-
-Example board file extract:
-
-&pinctrl_abx500 {
- pinctrl-names = "default";
- pinctrl-0 = <&sysclkreq2_default_mode>, <&sysclkreq3_default_mode>, <&gpio3_default_mode>, <&sysclkreq6_default_mode>, <&pwmout1_default_mode>, <&pwmout2_default_mode>, <&pwmout3_default_mode>, <&adi1_default_mode>, <&dmic12_default_mode>, <&dmic34_default_mode>, <&dmic56_default_mode>, <&sysclkreq5_default_mode>, <&batremn_default_mode>, <&service_default_mode>, <&pwrctrl0_default_mode>, <&pwrctrl1_default_mode>, <&pwmextvibra1_default_mode>, <&pwmextvibra2_default_mode>, <&gpio51_default_mode>, <&gpio52_default_mode>, <&gpio53_default_mode>, <&gpio54_default_mode>, <&pdmclkdat_default_mode>;
-
- sysclkreq2 {
- sysclkreq2_default_mode: sysclkreq2_default {
- default_mux {
- function = "sysclkreq";
- groups = "sysclkreq2_d_1";
- };
- default_cfg {
- pins = "GPIO1";
- bias-disable;
- };
- };
- };
- sysclkreq3 {
- sysclkreq3_default_mode: sysclkreq3_default {
- default_mux {
- function = "sysclkreq";
- groups = "sysclkreq3_d_1";
- };
- default_cfg {
- pins = "GPIO2";
- output-low;
- };
- };
- };
- gpio3 {
- gpio3_default_mode: gpio3_default {
- default_mux {
- function = "gpio";
- groups = "gpio3_a_1";
- };
- default_cfg {
- pins = "GPIO3";
- output-low;
- };
- };
- };
- sysclkreq6 {
- sysclkreq6_default_mode: sysclkreq6_default {
- default_mux {
- function = "sysclkreq";
- groups = "sysclkreq6_d_1";
- };
- default_cfg {
- pins = "GPIO4";
- bias-disable;
- };
- };
- };
- pwmout1 {
- pwmout1_default_mode: pwmout1_default {
- default_mux {
- function = "pwmout";
- groups = "pwmout1_d_1";
- };
- default_cfg {
- pins = "GPIO14";
- output-low;
- };
- };
- };
- pwmout2 {
- pwmout2_default_mode: pwmout2_default {
- pwmout2_default_mux {
- function = "pwmout";
- groups = "pwmout2_d_1";
- };
- pwmout2_default_cfg {
- pins = "GPIO15";
- output-low;
- };
- };
- };
- pwmout3 {
- pwmout3_default_mode: pwmout3_default {
- pwmout3_default_mux {
- function = "pwmout";
- groups = "pwmout3_d_1";
- };
- pwmout3_default_cfg {
- pins = "GPIO16";
- output-low;
- };
- };
- };
- adi1 {
-
- adi1_default_mode: adi1_default {
- adi1_default_mux {
- function = "adi1";
- groups = "adi1_d_1";
- };
- adi1_default_cfg1 {
- pins = "GPIO17","GPIO19","GPIO20";
- bias-disable;
- };
- adi1_default_cfg2 {
- pins = "GPIO18";
- output-low;
- };
- };
- };
- dmic12 {
- dmic12_default_mode: dmic12_default {
- dmic12_default_mux {
- function = "dmic";
- groups = "dmic12_d_1";
- };
- dmic12_default_cfg1 {
- pins = "GPIO27";
- output-low;
- };
- dmic12_default_cfg2 {
- pins = "GPIO28";
- bias-disable;
- };
- };
- };
- dmic34 {
- dmic34_default_mode: dmic34_default {
- dmic34_default_mux {
- function = "dmic";
- groups = "dmic34_d_1";
- };
- dmic34_default_cfg1 {
- pins = "GPIO29";
- output-low;
- };
- dmic34_default_cfg2 {
- pins = "GPIO30";
- bias-disable;{
-
- };
- };
- };
- dmic56 {
- dmic56_default_mode: dmic56_default {
- dmic56_default_mux {
- function = "dmic";
- groups = "dmic56_d_1";
- };
- dmic56_default_cfg1 {
- pins = "GPIO31";
- output-low;
- };
- dmic56_default_cfg2 {
- pins = "GPIO32";
- bias-disable;
- };
- };
- };
- sysclkreq5 {
- sysclkreq5_default_mode: sysclkreq5_default {
- sysclkreq5_default_mux {
- function = "sysclkreq";
- groups = "sysclkreq5_d_1";
- };
- sysclkreq5_default_cfg {
- pins = "GPIO42";
- output-low;
- };
- };
- };
- batremn {
- batremn_default_mode: batremn_default {
- batremn_default_mux {
- function = "batremn";
- groups = "batremn_d_1";
- };
- batremn_default_cfg {
- pins = "GPIO43";
- bias-disable;
- };
- };
- };
- service {
- service_default_mode: service_default {
- service_default_mux {
- function = "service";
- groups = "service_d_1";
- };
- service_default_cfg {
- pins = "GPIO44";
- bias-disable;
- };
- };
- };
- pwrctrl0 {
- pwrctrl0_default_mux: pwrctrl0_mux {
- pwrctrl0_default_mux {
- function = "pwrctrl";
- groups = "pwrctrl0_d_1";
- };
- };
- pwrctrl0_default_mode: pwrctrl0_default {
- pwrctrl0_default_cfg {
- pins = "GPIO45";
- bias-disable;
- };
- };
- };
- pwrctrl1 {
- pwrctrl1_default_mux: pwrctrl1_mux {
- pwrctrl1_default_mux {
- function = "pwrctrl";
- groups = "pwrctrl1_d_1";
- };
- };
- pwrctrl1_default_mode: pwrctrl1_default {
- pwrctrl1_default_cfg {
- pins = "GPIO46";
- bias-disable;
- };
- };
- };
- pwmextvibra1 {
- pwmextvibra1_default_mode: pwmextvibra1_default {
- pwmextvibra1_default_mux {
- function = "pwmextvibra";
- groups = "pwmextvibra1_d_1";
- };
- pwmextvibra1_default_cfg {
- pins = "GPIO47";
- bias-disable;
- };
- };
- };
- pwmextvibra2 {
- pwmextvibra2_default_mode: pwmextvibra2_default {
- pwmextvibra2_default_mux {
- function = "pwmextvibra";
- groups = "pwmextvibra2_d_1";
- };
- pwmextvibra1_default_cfg {
- pins = "GPIO48";
- bias-disable;
- };
- };
- };
- gpio51 {
- gpio51_default_mode: gpio51_default {
- gpio51_default_mux {
- function = "gpio";
- groups = "gpio51_a_1";
- };
- gpio51_default_cfg {
- pins = "GPIO51";
- output-low;
- };
- };
- };
- gpio52 {
- gpio52_default_mode: gpio52_default {
- gpio52_default_mux {
- function = "gpio";
- groups = "gpio52_a_1";
- };
- gpio52_default_cfg {
- pins = "GPIO52";
- bias-pull-down;
- };
- };
- };
- gpio53 {
- gpio53_default_mode: gpio53_default {
- gpio53_default_mux {
- function = "gpio";
- groups = "gpio53_a_1";
- };
- gpio53_default_cfg {
- pins = "GPIO53";
- bias-pull-down;
- };
- };
- };
- gpio54 {
- gpio54_default_mode: gpio54_default {
- gpio54_default_mux {
- function = "gpio";
- groups = "gpio54_a_1";
- };
- gpio54_default_cfg {
- pins = "GPIO54";
- output-low;
- };
- };
- };
- pdmclkdat {
- pdmclkdat_default_mode: pdmclkdat_default {
- pdmclkdat_default_mux {
- function = "pdm";
- groups = "pdmclkdat_d_1";
- };
- pdmclkdat_default_cfg {
- pins = "GPIO55", "GPIO56";
- bias-disable;
- };
- };
- };
-};
deleted file mode 100644
@@ -1,34 +0,0 @@
-AB85000 PMIC contains a node, which contains shared
-information about the battery connected to the PMIC.
-The node has no compatible property.
-
-Properties of this node are:
-
-thermistor-on-batctrl:
- A boolean value indicating thermistor interface to battery
-
- Note:
- 'btemp' and 'batctrl' are the pins interfaced for battery temperature
- measurement, 'btemp' signal is used when NTC(negative temperature
- coefficient) resister is interfaced external to battery whereas
- 'batctrl' pin is used when NTC resister is internal to battery.
-
- Example:
- ab8500_battery: ab8500_battery {
- thermistor-on-batctrl;
- };
- indicates: NTC resister is internal to battery, 'batctrl' is used
- for thermal measurement.
-
- The absence of property 'thermal-on-batctrl' indicates
- NTC resister is external to battery and 'btemp' signal is used
- for thermal measurement.
-
-battery-type:
- This shall be the battery manufacturing technology type,
- allowed types are:
- "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
- Example:
- ab8500_battery: ab8500_battery {
- stericsson,battery-type = "LIPO";
- }
Convert the binding to DT schema format. I slightly modified the binding by renaming the gpio node from ab8500-gpio to ab8500-gpiocontroller, since the -gpio suffix is used for gpio consumers. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- .../devicetree/bindings/mfd/ab8500.txt | 280 ------- .../bindings/mfd/stericsson,ab8500.yaml | 696 ++++++++++++++++++ .../bindings/pinctrl/ste,abx500.txt | 318 -------- .../supply/stericsson,ab8500-battery.txt | 34 - 4 files changed, 696 insertions(+), 632 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/ab8500.txt create mode 100644 Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml delete mode 100644 Documentation/devicetree/bindings/pinctrl/ste,abx500.txt delete mode 100644 Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt