| Message ID | 1417728264-7268-1-git-send-email-tyler.baker@linaro.org |
|---|---|
| State | Accepted |
| Commit | bb2dfcbdcce3ea5be89b0bed261483541a4e8e99 |
| Headers | show |
On 4 December 2014 at 23:17, Olof Johansson <olof@lixom.net> wrote: > On Thu, Dec 04, 2014 at 01:24:24PM -0800, Tyler Baker wrote: >> This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used >> on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards >> are producing the following runtime errors only on the multi_v7_defconfig [2]: >> >> kern.err: deviceless supply vdd_arm not found, using dummy regulator >> kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 >> kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 >> >> I reviewed the exynos_defconfig, which does not produce these runtime >> errors. It was obvious that the exynos_defconfig has the PMIC drivers >> enabled, whereas the multi_v7_defconfig does not. This patch has been tested >> on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. >> Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. >> >> [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 >> [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html >> > > FWIW, the 5250-based Samsung Chromebook also uses 77686. After you pointed this out, I took a look at your boot logs for snow [1] and indeed it does show the same runtime errors described in this patch. > > Applied to next/defconfig for 3.19 after fixing up some fuzz. Thanks! > > > -Olof Tyler [1] http://arm-soc.lixom.net/bootlogs/arm-soc/v3.18-rc7-1140-g9c6e242/snow-arm-multi_v7_defconfig.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 930bfcb..d789658 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -280,6 +280,7 @@ CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y +CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX8907=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y @@ -294,6 +295,7 @@ CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_REGULATOR_MAX8907=y +CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -399,6 +401,7 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_PALMAS=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y @@ -433,6 +436,7 @@ CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_COMMON_CLK_MAX77686=y CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y
This patch enables the MAX77686 PMIC drivers in the multi_v7_defconfig used on exynos4412-prime family of SoCs [1]. The exynos4412-prime based boards are producing the following runtime errors only on the multi_v7_defconfig [2]: kern.err: deviceless supply vdd_arm not found, using dummy regulator kern.err: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage to 1287500 kern.err: cpufreq: __target_index: Failed to change cpu frequency: -22 I reviewed the exynos_defconfig, which does not produce these runtime errors. It was obvious that the exynos_defconfig has the PMIC drivers enabled, whereas the multi_v7_defconfig does not. This patch has been tested on a odroid-u2 and a odroid-u3 board. It has resolved the runtime errors. Therefore, I purpose we enabled these drivers in the multi_v7_defconfig. [1] http://www.hardkernel.com/main/products/prdt_info.php?g_code=G135270682824 [2] http://storage.armcloud.us/kernel-ci/mainline/v3.18-rc7-48-g7cc78f8/arm-multi_v7_defconfig/lab-tbaker-00/boot-exynos4412-odroidu3.html Signed-off-by: Tyler Baker <tyler.baker@linaro.org> --- arch/arm/configs/multi_v7_defconfig | 4 ++++ 1 file changed, 4 insertions(+)