| Message ID | 20210409203809.21940-1-jeremy.linton@arm.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] usb: dwc2: Enable RPi in ACPI mode | expand |
On Fri, Apr 09, 2021 at 03:38:09PM -0500, Jeremy Linton wrote: > The dwc2 driver has everything we need to run > in ACPI mode except for the ACPI module device table > boilerplate. With that added and identified as "BCM2848", > an id in use by other OSs for this device, the dw2 > controller on the BCM2711 will work. > > Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> > --- > drivers/usb/dwc2/core.h | 2 ++ > drivers/usb/dwc2/params.c | 18 +++++++++++++++++- > drivers/usb/dwc2/platform.c | 1 + > 3 files changed, 20 insertions(+), 1 deletion(-) Hi, This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree. You are receiving this message because of the following common error(s) as indicated below: - This looks like a new version of a previously submitted patch, but you did not list below the --- line any changes from the previous version. Please read the section entitled "The canonical patch format" in the kernel file, Documentation/SubmittingPatches for what needs to be done here to properly describe this. If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers. thanks, greg k-h's patch email bot
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 7161344c6522..defc6034af49 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -38,6 +38,7 @@ #ifndef __DWC2_CORE_H__ #define __DWC2_CORE_H__ +#include <linux/acpi.h> #include <linux/phy/phy.h> #include <linux/regulator/consumer.h> #include <linux/usb/gadget.h> @@ -1339,6 +1340,7 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev); /* The device ID match table */ extern const struct of_device_id dwc2_of_match_table[]; +extern const struct acpi_device_id dwc2_acpi_match[]; int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg); int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg); diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index 92df3d620f7d..7a6089fa81e1 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -232,6 +232,12 @@ const struct of_device_id dwc2_of_match_table[] = { }; MODULE_DEVICE_TABLE(of, dwc2_of_match_table); +const struct acpi_device_id dwc2_acpi_match[] = { + { "BCM2848", (kernel_ulong_t)dwc2_set_bcm_params }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match); + static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg) { u8 val; @@ -866,10 +872,12 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg) return 0; } +typedef void (*set_params_cb)(struct dwc2_hsotg *data); + int dwc2_init_params(struct dwc2_hsotg *hsotg) { const struct of_device_id *match; - void (*set_params)(struct dwc2_hsotg *data); + set_params_cb set_params; dwc2_set_default_params(hsotg); dwc2_get_device_properties(hsotg); @@ -878,6 +886,14 @@ int dwc2_init_params(struct dwc2_hsotg *hsotg) if (match && match->data) { set_params = match->data; set_params(hsotg); + } else { + const struct acpi_device_id *amatch; + + amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev); + if (amatch && amatch->driver_data) { + set_params = (set_params_cb)amatch->driver_data; + set_params(hsotg); + } } dwc2_check_params(hsotg); diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index 5f18acac7406..53fc6bc3ed1a 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -734,6 +734,7 @@ static struct platform_driver dwc2_platform_driver = { .driver = { .name = dwc2_driver_name, .of_match_table = dwc2_of_match_table, + .acpi_match_table = ACPI_PTR(dwc2_acpi_match), .pm = &dwc2_dev_pm_ops, }, .probe = dwc2_driver_probe,
The dwc2 driver has everything we need to run in ACPI mode except for the ACPI module device table boilerplate. With that added and identified as "BCM2848", an id in use by other OSs for this device, the dw2 controller on the BCM2711 will work. Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> --- drivers/usb/dwc2/core.h | 2 ++ drivers/usb/dwc2/params.c | 18 +++++++++++++++++- drivers/usb/dwc2/platform.c | 1 + 3 files changed, 20 insertions(+), 1 deletion(-) -- 2.29.2