@@ -99,10 +99,12 @@ struct adv7842_state {
v4l2_std_id norm;
struct {
u8 edid[256];
+ u32 blocks;
u32 present;
} hdmi_edid;
struct {
u8 edid[256];
+ u32 blocks;
u32 present;
} vga_edid;
struct v4l2_fract aspect_ratio;
@@ -711,7 +713,8 @@ static int edid_write_vga_segment(struct v4l2_subdev *sd)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct adv7842_state *state = to_state(sd);
- const u8 *val = state->vga_edid.edid;
+ const u8 *edid = state->vga_edid.edid;
+ u32 blocks = state->vga_edid.blocks;
int err = 0;
int i;
@@ -726,10 +729,10 @@ static int edid_write_vga_segment(struct v4l2_subdev *sd)
/* edid segment pointer '1' for VGA port */
rep_write_and_or(sd, 0x77, 0xef, 0x10);
- for (i = 0; !err && i < 256; i += I2C_SMBUS_BLOCK_MAX)
+ for (i = 0; !err && i < blocks * 128; i += I2C_SMBUS_BLOCK_MAX)
err = i2c_smbus_write_i2c_block_data(state->i2c_edid, i,
I2C_SMBUS_BLOCK_MAX,
- val + i);
+ edid + i);
if (err)
return err;
@@ -759,8 +762,9 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct adv7842_state *state = to_state(sd);
const u8 *edid = state->hdmi_edid.edid;
+ u32 blocks = state->hdmi_edid.blocks;
int spa_loc;
- u16 pa;
+ u16 pa, parent_pa;
int err = 0;
int i;
@@ -778,33 +782,35 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
return 0;
}
- pa = v4l2_get_edid_phys_addr(edid, 256, &spa_loc);
- err = v4l2_phys_addr_validate(pa, &pa, NULL);
+ pa = v4l2_get_edid_phys_addr(edid, blocks * 128, &spa_loc);
+ err = v4l2_phys_addr_validate(pa, &parent_pa, NULL);
if (err)
return err;
- /*
- * Return an error if no location of the source physical address
- * was found.
- */
- if (spa_loc == 0)
- return -EINVAL;
+ if (!spa_loc) {
+ /*
+ * There is no SPA, so just set spa_loc to 128 and pa to whatever
+ * data is there.
+ */
+ spa_loc = 128;
+ pa = (edid[spa_loc] << 8) | edid[spa_loc + 1];
+ }
/* edid segment pointer '0' for HDMI ports */
rep_write_and_or(sd, 0x77, 0xef, 0x00);
- for (i = 0; !err && i < 256; i += I2C_SMBUS_BLOCK_MAX)
+ for (i = 0; !err && i < blocks * 128; i += I2C_SMBUS_BLOCK_MAX)
err = i2c_smbus_write_i2c_block_data(state->i2c_edid, i,
I2C_SMBUS_BLOCK_MAX, edid + i);
if (err)
return err;
if (port == ADV7842_EDID_PORT_A) {
- rep_write(sd, 0x72, edid[spa_loc]);
- rep_write(sd, 0x73, edid[spa_loc + 1]);
+ rep_write(sd, 0x72, pa >> 8);
+ rep_write(sd, 0x73, pa & 0xff);
} else {
- rep_write(sd, 0x74, edid[spa_loc]);
- rep_write(sd, 0x75, edid[spa_loc + 1]);
+ rep_write(sd, 0x74, pa >> 8);
+ rep_write(sd, 0x75, pa & 0xff);
}
rep_write(sd, 0x76, spa_loc & 0xff);
rep_write_and_or(sd, 0x77, 0xbf, (spa_loc >> 2) & 0x40);
@@ -824,7 +830,7 @@ static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
(port == ADV7842_EDID_PORT_A) ? 'A' : 'B');
return -EIO;
}
- cec_s_phys_addr(state->cec_adap, pa, false);
+ cec_s_phys_addr(state->cec_adap, parent_pa, false);
/* enable hotplug after 200 ms */
schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 5);
@@ -2443,6 +2449,7 @@ static int adv7842_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
static int adv7842_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
{
struct adv7842_state *state = to_state(sd);
+ u32 blocks = 0;
u8 *data = NULL;
memset(edid->reserved, 0, sizeof(edid->reserved));
@@ -2450,30 +2457,34 @@ static int adv7842_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
switch (edid->pad) {
case ADV7842_EDID_PORT_A:
case ADV7842_EDID_PORT_B:
- if (state->hdmi_edid.present & (0x04 << edid->pad))
+ if (state->hdmi_edid.present & (0x04 << edid->pad)) {
data = state->hdmi_edid.edid;
+ blocks = state->hdmi_edid.blocks;
+ }
break;
case ADV7842_EDID_PORT_VGA:
- if (state->vga_edid.present)
+ if (state->vga_edid.present) {
data = state->vga_edid.edid;
+ blocks = state->vga_edid.blocks;
+ }
break;
default:
return -EINVAL;
}
if (edid->start_block == 0 && edid->blocks == 0) {
- edid->blocks = data ? 2 : 0;
+ edid->blocks = blocks;
return 0;
}
if (!data)
return -ENODATA;
- if (edid->start_block >= 2)
+ if (edid->start_block >= blocks)
return -EINVAL;
- if (edid->start_block + edid->blocks > 2)
- edid->blocks = 2 - edid->start_block;
+ if (edid->start_block + edid->blocks > blocks)
+ edid->blocks = blocks - edid->start_block;
memcpy(edid->edid, data + edid->start_block * 128, edid->blocks * 128);
@@ -2497,26 +2508,30 @@ static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
}
/* todo, per edid */
- state->aspect_ratio = v4l2_calc_aspect_ratio(e->edid[0x15],
- e->edid[0x16]);
+ if (e->blocks)
+ state->aspect_ratio = v4l2_calc_aspect_ratio(e->edid[0x15],
+ e->edid[0x16]);
switch (e->pad) {
case ADV7842_EDID_PORT_VGA:
memset(&state->vga_edid.edid, 0, 256);
+ state->vga_edid.blocks = e->blocks;
state->vga_edid.present = e->blocks ? 0x1 : 0x0;
- memcpy(&state->vga_edid.edid, e->edid, 128 * e->blocks);
+ if (e->blocks)
+ memcpy(&state->vga_edid.edid, e->edid, 128 * e->blocks);
err = edid_write_vga_segment(sd);
break;
case ADV7842_EDID_PORT_A:
case ADV7842_EDID_PORT_B:
memset(&state->hdmi_edid.edid, 0, 256);
+ state->hdmi_edid.blocks = e->blocks;
if (e->blocks) {
state->hdmi_edid.present |= 0x04 << e->pad;
+ memcpy(&state->hdmi_edid.edid, e->edid, 128 * e->blocks);
} else {
state->hdmi_edid.present &= ~(0x04 << e->pad);
adv7842_s_detect_tx_5v_ctrl(sd);
}
- memcpy(&state->hdmi_edid.edid, e->edid, 128 * e->blocks);
err = edid_write_hdmi_segment(sd, e->pad);
break;
default:
Add support for EDIDs consisting of one EDID block. Related to this, improve CEC physical address handling. Clearing the EDID caused a bug since v4l2_calc_aspect_ratio() was called with a NULL pointer. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> --- drivers/media/i2c/adv7842.c | 71 ++++++++++++++++++++++--------------- 1 file changed, 43 insertions(+), 28 deletions(-)