@@ -323,6 +323,8 @@ static const struct dev_pm_ops cdns_ufs_dev_pm_ops = {
.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
.runtime_resume = ufshcd_pltfrm_runtime_resume,
.runtime_idle = ufshcd_pltfrm_runtime_idle,
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
};
static struct platform_driver cdns_ufs_pltfrm_driver = {
@@ -148,6 +148,8 @@ static const struct dev_pm_ops tc_dwc_g210_pci_pm_ops = {
.runtime_suspend = tc_dwc_g210_pci_runtime_suspend,
.runtime_resume = tc_dwc_g210_pci_runtime_resume,
.runtime_idle = tc_dwc_g210_pci_runtime_idle,
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
};
static const struct pci_device_id tc_dwc_g210_pci_tbl[] = {
@@ -13,7 +13,7 @@ void __init ufs_debugfs_init(void)
ufs_debugfs_root = debugfs_create_dir("ufshcd", NULL);
}
-void __exit ufs_debugfs_exit(void)
+void ufs_debugfs_exit(void)
{
debugfs_remove_recursive(ufs_debugfs_root);
}
@@ -9,7 +9,7 @@ struct ufs_hba;
#ifdef CONFIG_DEBUG_FS
void __init ufs_debugfs_init(void);
-void __exit ufs_debugfs_exit(void);
+void ufs_debugfs_exit(void);
void ufs_debugfs_hba_init(struct ufs_hba *hba);
void ufs_debugfs_hba_exit(struct ufs_hba *hba);
void ufs_debugfs_exception_event(struct ufs_hba *hba, u16 status);
@@ -1267,6 +1267,8 @@ static const struct dev_pm_ops exynos_ufs_pm_ops = {
.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
.runtime_resume = ufshcd_pltfrm_runtime_resume,
.runtime_idle = ufshcd_pltfrm_runtime_idle,
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
};
static struct platform_driver exynos_ufs_pltform = {
@@ -574,6 +574,8 @@ static const struct dev_pm_ops ufs_hisi_pm_ops = {
.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
.runtime_resume = ufshcd_pltfrm_runtime_resume,
.runtime_idle = ufshcd_pltfrm_runtime_idle,
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
};
static struct platform_driver ufs_hisi_pltform = {
@@ -810,12 +810,10 @@ static int ufs_mtk_post_link(struct ufs_hba *hba)
/* enable unipro clock gating feature */
ufs_mtk_cfg_unipro_cg(hba, true);
- /* configure auto-hibern8 timer to 10ms */
- if (ufshcd_is_auto_hibern8_supported(hba)) {
- ufshcd_auto_hibern8_update(hba,
- FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 10) |
- FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3));
- }
+ /* will be configured during probe hba */
+ if (ufshcd_is_auto_hibern8_supported(hba))
+ hba->ahit = FIELD_PREP(UFSHCI_AHIBERN8_TIMER_MASK, 10) |
+ FIELD_PREP(UFSHCI_AHIBERN8_SCALE_MASK, 3);
ufs_mtk_setup_clk_gating(hba);
@@ -1097,6 +1095,8 @@ static const struct dev_pm_ops ufs_mtk_pm_ops = {
.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
.runtime_resume = ufshcd_pltfrm_runtime_resume,
.runtime_idle = ufshcd_pltfrm_runtime_idle,
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
};
static struct platform_driver ufs_mtk_pltform = {
@@ -1556,6 +1556,8 @@ static const struct dev_pm_ops ufs_qcom_pm_ops = {
.runtime_suspend = ufshcd_pltfrm_runtime_suspend,
.runtime_resume = ufshcd_pltfrm_runtime_resume,
.runtime_idle = ufshcd_pltfrm_runtime_idle,
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
};
static struct platform_driver ufs_qcom_pltform = {
@@ -97,7 +97,7 @@ static int ufs_bsg_request(struct bsg_job *job)
bsg_reply->reply_payload_rcv_len = 0;
- pm_runtime_get_sync(hba->dev);
+ scsi_autopm_get_device(hba->sdev_ufs_device);
msgcode = bsg_request->msgcode;
switch (msgcode) {
@@ -106,7 +106,7 @@ static int ufs_bsg_request(struct bsg_job *job)
ret = ufs_bsg_alloc_desc_buffer(hba, job, &desc_buff,
&desc_len, desc_op);
if (ret) {
- pm_runtime_put_sync(hba->dev);
+ scsi_autopm_put_device(hba->sdev_ufs_device);
goto out;
}
@@ -138,7 +138,7 @@ static int ufs_bsg_request(struct bsg_job *job)
break;
}
- pm_runtime_put_sync(hba->dev);
+ scsi_autopm_put_device(hba->sdev_ufs_device);
if (!desc_buff)
goto out;
@@ -410,29 +410,6 @@ static int ufshcd_pci_resume(struct device *dev)
return ufshcd_system_resume(dev_get_drvdata(dev));
}
-/**
- * ufshcd_pci_poweroff - suspend-to-disk poweroff function
- * @dev: pointer to PCI device handle
- *
- * Returns 0 if successful
- * Returns non-zero otherwise
- */
-static int ufshcd_pci_poweroff(struct device *dev)
-{
- struct ufs_hba *hba = dev_get_drvdata(dev);
- int spm_lvl = hba->spm_lvl;
- int ret;
-
- /*
- * For poweroff we need to set the UFS device to PowerDown mode.
- * Force spm_lvl to ensure that.
- */
- hba->spm_lvl = 5;
- ret = ufshcd_system_suspend(hba);
- hba->spm_lvl = spm_lvl;
- return ret;
-}
-
#endif /* !CONFIG_PM_SLEEP */
#ifdef CONFIG_PM
@@ -533,17 +510,14 @@ ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
static const struct dev_pm_ops ufshcd_pci_pm_ops = {
-#ifdef CONFIG_PM_SLEEP
- .suspend = ufshcd_pci_suspend,
- .resume = ufshcd_pci_resume,
- .freeze = ufshcd_pci_suspend,
- .thaw = ufshcd_pci_resume,
- .poweroff = ufshcd_pci_poweroff,
- .restore = ufshcd_pci_resume,
-#endif
SET_RUNTIME_PM_OPS(ufshcd_pci_runtime_suspend,
ufshcd_pci_runtime_resume,
ufshcd_pci_runtime_idle)
+ SET_SYSTEM_SLEEP_PM_OPS(ufshcd_pci_suspend, ufshcd_pci_resume)
+#ifdef CONFIG_PM_SLEEP
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
+#endif
};
static const struct pci_device_id ufshcd_pci_tbl[] = {
@@ -16,6 +16,7 @@
#include <linux/bitfield.h>
#include <linux/blk-pm.h>
#include <linux/blkdev.h>
+#include <scsi/scsi_driver.h>
#include "ufshcd.h"
#include "ufs_quirks.h"
#include "unipro.h"
@@ -77,6 +78,8 @@
/* Polling time to wait for fDeviceInit */
#define FDEVICEINIT_COMPL_TIMEOUT 1500 /* millisecs */
+#define wlun_dev_to_hba(dv) shost_priv(to_scsi_device(dv)->host)
+
#define ufshcd_toggle_vreg(_dev, _vreg, _on) \
({ \
int _ret; \
@@ -1551,7 +1554,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
if (value == hba->clk_scaling.is_enabled)
goto out;
- pm_runtime_get_sync(hba->dev);
+ scsi_autopm_get_device(hba->sdev_ufs_device);
ufshcd_hold(hba, false);
hba->clk_scaling.is_enabled = value;
@@ -1567,7 +1570,7 @@ static ssize_t ufshcd_clkscale_enable_store(struct device *dev,
}
ufshcd_release(hba);
- pm_runtime_put_sync(hba->dev);
+ scsi_autopm_put_device(hba->sdev_ufs_device);
out:
up(&hba->host_sem);
return err ? err : count;
@@ -2565,6 +2568,17 @@ static inline u16 ufshcd_upiu_wlun_to_scsi_wlun(u8 upiu_wlun_id)
return (upiu_wlun_id & ~UFS_UPIU_WLUN_ID) | SCSI_W_LUN_BASE;
}
+static inline bool is_rpmb_wlun(struct scsi_device *sdev)
+{
+ return (sdev->lun == ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN));
+}
+
+static inline bool is_device_wlun(struct scsi_device *sdev)
+{
+ return (sdev->lun ==
+ ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN));
+}
+
static void ufshcd_init_lrb(struct ufs_hba *hba, struct ufshcd_lrb *lrb, int i)
{
struct utp_transfer_cmd_desc *cmd_descp = hba->ucdl_base_addr;
@@ -4099,11 +4113,11 @@ void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit)
spin_unlock_irqrestore(hba->host->host_lock, flags);
if (update && !pm_runtime_suspended(hba->dev)) {
- pm_runtime_get_sync(hba->dev);
+ scsi_autopm_get_device(hba->sdev_ufs_device);
ufshcd_hold(hba, false);
ufshcd_auto_hibern8_enable(hba);
ufshcd_release(hba);
- pm_runtime_put(hba->dev);
+ scsi_autopm_put_device(hba->sdev_ufs_device);
}
}
EXPORT_SYMBOL_GPL(ufshcd_auto_hibern8_update);
@@ -4801,6 +4815,40 @@ static inline void ufshcd_get_lu_power_on_wp_status(struct ufs_hba *hba,
}
/**
+ * ufshcd_setup_links - associate link b/w device wlun and other luns
+ * @sdev: pointer to SCSI device
+ * @hba: pointer to ufs hba
+ */
+static void ufshcd_setup_links(struct ufs_hba *hba, struct scsi_device *sdev)
+{
+ struct device_link *link;
+
+ /*
+ * device wlun is the supplier & rest of the luns are consumers
+ * This ensures that device wlun suspends after all other luns.
+ */
+ if (hba->sdev_ufs_device) {
+ link = device_link_add(&sdev->sdev_gendev,
+ &hba->sdev_ufs_device->sdev_gendev,
+ DL_FLAG_PM_RUNTIME|DL_FLAG_RPM_ACTIVE);
+ if (!link) {
+ dev_err(&sdev->sdev_gendev, "Failed establishing link - %s\n",
+ dev_name(&hba->sdev_ufs_device->sdev_gendev));
+ return;
+ }
+ hba->luns_avail--;
+ /* Ignore REPORT_LUN wlun probing */
+ if (hba->luns_avail == 1) {
+ pm_runtime_put(&hba->sdev_ufs_device->sdev_gendev);
+ return;
+ }
+ } else {
+ /* device wlun is probed */
+ hba->luns_avail--;
+ }
+}
+
+/**
* ufshcd_slave_alloc - handle initial SCSI device configurations
* @sdev: pointer to SCSI device
*
@@ -4831,6 +4879,8 @@ static int ufshcd_slave_alloc(struct scsi_device *sdev)
ufshcd_get_lu_power_on_wp_status(hba, sdev);
+ ufshcd_setup_links(hba, sdev);
+
return 0;
}
@@ -4862,8 +4912,13 @@ static int ufshcd_slave_configure(struct scsi_device *sdev)
blk_queue_update_dma_pad(q, PRDT_DATA_BYTE_COUNT_PAD - 1);
if (hba->quirks & UFSHCD_QUIRK_ALIGN_SG_WITH_PAGE_SIZE)
blk_queue_update_dma_alignment(q, PAGE_SIZE - 1);
-
- if (ufshcd_is_rpm_autosuspend_allowed(hba))
+ /*
+ * Block runtime-pm until all consumers are added.
+ * Refer ufshcd_setup_links().
+ */
+ if (is_device_wlun(sdev))
+ pm_runtime_get_noresume(&sdev->sdev_gendev);
+ else if (ufshcd_is_rpm_autosuspend_allowed(hba))
sdev->rpm_autosuspend = 1;
ufshcd_crypto_setup_rq_keyslot_manager(hba, q);
@@ -4979,15 +5034,9 @@ ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
*/
if (!hba->pm_op_in_progress &&
!ufshcd_eh_in_progress(hba) &&
- ufshcd_is_exception_event(lrbp->ucd_rsp_ptr) &&
- schedule_work(&hba->eeh_work)) {
- /*
- * Prevent suspend once eeh_work is scheduled
- * to avoid deadlock between ufshcd_suspend
- * and exception event handler.
- */
- pm_runtime_get_noresume(hba->dev);
- }
+ ufshcd_is_exception_event(lrbp->ucd_rsp_ptr))
+ /* Flushed in suspend */
+ schedule_work(&hba->eeh_work);
break;
case UPIU_TRANSACTION_REJECT_UPIU:
/* TODO: handle Reject UPIU Response */
@@ -5586,8 +5635,8 @@ static void ufshcd_rpm_dev_flush_recheck_work(struct work_struct *work)
* after a certain delay to recheck the threshold by next runtime
* suspend.
*/
- pm_runtime_get_sync(hba->dev);
- pm_runtime_put_sync(hba->dev);
+ scsi_autopm_get_device(hba->sdev_ufs_device);
+ scsi_autopm_put_device(hba->sdev_ufs_device);
}
/**
@@ -5604,7 +5653,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
u32 status = 0;
hba = container_of(work, struct ufs_hba, eeh_work);
- pm_runtime_get_sync(hba->dev);
ufshcd_scsi_block_requests(hba);
err = ufshcd_get_ee_status(hba, &status);
if (err) {
@@ -5621,14 +5669,6 @@ static void ufshcd_exception_event_handler(struct work_struct *work)
ufs_debugfs_exception_event(hba, status);
out:
ufshcd_scsi_unblock_requests(hba);
- /*
- * pm_runtime_get_noresume is called while scheduling
- * eeh_work to avoid suspend racing with exception work.
- * Hence decrement usage counter using pm_runtime_put_noidle
- * to allow suspend on completion of exception event handler.
- */
- pm_runtime_put_noidle(hba->dev);
- pm_runtime_put(hba->dev);
return;
}
@@ -5753,12 +5793,13 @@ static void ufshcd_clk_scaling_suspend(struct ufs_hba *hba, bool suspend)
static void ufshcd_err_handling_prepare(struct ufs_hba *hba)
{
- pm_runtime_get_sync(hba->dev);
- if (pm_runtime_status_suspended(hba->dev) || hba->is_sys_suspended) {
+ scsi_autopm_get_device(hba->sdev_ufs_device);
+ if (pm_runtime_status_suspended(&hba->sdev_ufs_device->sdev_gendev) ||
+ hba->is_sys_suspended) {
enum ufs_pm_op pm_op;
/*
- * Don't assume anything of pm_runtime_get_sync(), if
+ * Don't assume anything of resume, if
* resume fails, irq and clocks can be OFF, and powers
* can be OFF or in LPM.
*/
@@ -5794,7 +5835,7 @@ static void ufshcd_err_handling_unprepare(struct ufs_hba *hba)
if (ufshcd_is_clkscaling_supported(hba))
ufshcd_clk_scaling_suspend(hba, false);
ufshcd_clear_ua_wluns(hba);
- pm_runtime_put(hba->dev);
+ pm_runtime_put(&hba->sdev_ufs_device->sdev_gendev);
}
static inline bool ufshcd_err_handling_should_stop(struct ufs_hba *hba)
@@ -5815,14 +5856,14 @@ static void ufshcd_recover_pm_error(struct ufs_hba *hba)
hba->is_sys_suspended = false;
/*
- * Set RPM status of hba device to RPM_ACTIVE,
+ * Set RPM status of wlun device to RPM_ACTIVE,
* this also clears its runtime error.
*/
- ret = pm_runtime_set_active(hba->dev);
+ ret = pm_runtime_set_active(&hba->sdev_ufs_device->sdev_gendev);
/*
- * If hba device had runtime error, we also need to resume those
- * scsi devices under hba in case any of them has failed to be
- * resumed due to hba runtime resume failure. This is to unblock
+ * If wlun device had runtime error, we also need to resume those
+ * consumer scsi devices in case any of them has failed to be
+ * resumed due to supplier runtime resume failure. This is to unblock
* blk_queue_enter in case there are bios waiting inside it.
*/
if (!ret) {
@@ -7249,7 +7290,6 @@ static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
hba->sdev_ufs_device = NULL;
goto out;
}
- ufshcd_blk_pm_runtime_init(hba->sdev_ufs_device);
scsi_device_put(hba->sdev_ufs_device);
hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
@@ -7413,6 +7453,9 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
goto out;
}
+ hba->luns_avail = desc_buf[DEVICE_DESC_PARAM_NUM_LU] +
+ desc_buf[DEVICE_DESC_PARAM_NUM_WLU];
+
ufs_fixup_device_setup(hba);
ufshcd_wb_probe(hba, desc_buf);
@@ -7890,6 +7933,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba, bool async)
ufshcd_set_ufs_dev_active(hba);
ufshcd_force_reset_auto_bkops(hba);
hba->wlun_dev_clr_ua = true;
+ hba->wlun_rpmb_clr_ua = true;
/* Gear up to HS gear if supported */
if (hba->max_pwr_info.is_valid) {
@@ -8475,7 +8519,8 @@ static int ufshcd_set_dev_pwr_mode(struct ufs_hba *hba,
* handling context.
*/
hba->host->eh_noresume = 1;
- ufshcd_clear_ua_wluns(hba);
+ if (hba->wlun_dev_clr_ua)
+ ufshcd_clear_ua_wlun(hba, UFS_UPIU_UFS_DEVICE_WLUN);
cmd[4] = pwr_mode << 4;
@@ -8650,23 +8695,7 @@ static void ufshcd_hba_vreg_set_hpm(struct ufs_hba *hba)
ufshcd_setup_hba_vreg(hba, true);
}
-/**
- * ufshcd_suspend - helper function for suspend operations
- * @hba: per adapter instance
- * @pm_op: desired low power operation type
- *
- * This function will try to put the UFS device and link into low power
- * mode based on the "rpm_lvl" (Runtime PM level) or "spm_lvl"
- * (System PM level).
- *
- * If this function is called during shutdown, it will make sure that
- * both UFS device and UFS link is powered off.
- *
- * NOTE: UFS device & link must be active before we enter in this function.
- *
- * Returns 0 for success and non-zero for failure
- */
-static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+static int __ufshcd_wl_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
int ret = 0;
int check_for_bkops;
@@ -8674,7 +8703,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
enum ufs_dev_pwr_mode req_dev_pwr_mode;
enum uic_link_state req_link_state;
- hba->pm_op_in_progress = 1;
+ hba->pm_op_in_progress = true;
if (!ufshcd_is_shutdown_pm(pm_op)) {
pm_lvl = ufshcd_is_runtime_pm(pm_op) ?
hba->rpm_lvl : hba->spm_lvl;
@@ -8697,17 +8726,17 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if (req_dev_pwr_mode == UFS_ACTIVE_PWR_MODE &&
req_link_state == UIC_LINK_ACTIVE_STATE) {
- goto disable_clks;
+ goto enable_scaling;
}
if ((req_dev_pwr_mode == hba->curr_dev_pwr_mode) &&
(req_link_state == hba->uic_link_state))
- goto enable_gating;
+ goto enable_scaling;
/* UFS device & link must be active before we enter in this function */
if (!ufshcd_is_ufs_dev_active(hba) || !ufshcd_is_link_active(hba)) {
ret = -EINVAL;
- goto enable_gating;
+ goto enable_scaling;
}
if (ufshcd_is_runtime_pm(pm_op)) {
@@ -8719,7 +8748,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
*/
ret = ufshcd_urgent_bkops(hba);
if (ret)
- goto enable_gating;
+ goto enable_scaling;
} else {
/* make sure that auto bkops is disabled */
ufshcd_disable_auto_bkops(hba);
@@ -8747,7 +8776,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if (!hba->dev_info.b_rpm_dev_flush_capable) {
ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
if (ret)
- goto enable_gating;
+ goto enable_scaling;
}
}
@@ -8760,7 +8789,6 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if (ret)
goto set_dev_active;
-disable_clks:
/*
* Call vendor specific suspend callback. As these callbacks may access
* vendor specific host controller register space call them before the
@@ -8769,28 +8797,9 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ret = ufshcd_vops_suspend(hba, pm_op);
if (ret)
goto set_link_active;
- /*
- * Disable the host irq as host controller as there won't be any
- * host controller transaction expected till resume.
- */
- ufshcd_disable_irq(hba);
-
- ufshcd_setup_clocks(hba, false);
-
- if (ufshcd_is_clkgating_allowed(hba)) {
- hba->clk_gating.state = CLKS_OFF;
- trace_ufshcd_clk_gating(dev_name(hba->dev),
- hba->clk_gating.state);
- }
-
- ufshcd_vreg_set_lpm(hba);
-
- /* Put the host controller in low power mode if possible */
- ufshcd_hba_vreg_set_lpm(hba);
goto out;
set_link_active:
- ufshcd_vreg_set_hpm(hba);
/*
* Device hardware reset is required to exit DeepSleep. Also, for
* DeepSleep, the link is off so host reset and restore will be done
@@ -8812,57 +8821,32 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
}
if (!ufshcd_set_dev_pwr_mode(hba, UFS_ACTIVE_PWR_MODE))
ufshcd_disable_auto_bkops(hba);
-enable_gating:
+enable_scaling:
if (ufshcd_is_clkscaling_supported(hba))
ufshcd_clk_scaling_suspend(hba, false);
- hba->clk_gating.is_suspended = false;
hba->dev_info.b_rpm_dev_flush_capable = false;
- ufshcd_clear_ua_wluns(hba);
- ufshcd_release(hba);
out:
if (hba->dev_info.b_rpm_dev_flush_capable) {
schedule_delayed_work(&hba->rpm_dev_flush_recheck_work,
msecs_to_jiffies(RPM_DEV_FLUSH_RECHECK_WORK_DELAY_MS));
}
- hba->pm_op_in_progress = 0;
-
- if (ret)
- ufshcd_update_evt_hist(hba, UFS_EVT_SUSPEND_ERR, (u32)ret);
+ if (ret) {
+ ufshcd_update_evt_hist(hba, UFS_EVT_WL_SUSP_ERR, (u32)ret);
+ hba->clk_gating.is_suspended = false;
+ ufshcd_release(hba);
+ }
+ hba->pm_op_in_progress = false;
return ret;
}
-/**
- * ufshcd_resume - helper function for resume operations
- * @hba: per adapter instance
- * @pm_op: runtime PM or system PM
- *
- * This function basically brings the UFS device, UniPro link and controller
- * to active state.
- *
- * Returns 0 for success and non-zero for failure
- */
-static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+static int __ufshcd_wl_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
int ret;
- enum uic_link_state old_link_state;
+ enum uic_link_state old_link_state = hba->uic_link_state;
- hba->pm_op_in_progress = 1;
- old_link_state = hba->uic_link_state;
-
- ufshcd_hba_vreg_set_hpm(hba);
- ret = ufshcd_vreg_set_hpm(hba);
- if (ret)
- goto out;
-
- /* Make sure clocks are enabled before accessing controller */
- ret = ufshcd_setup_clocks(hba, true);
- if (ret)
- goto disable_vreg;
-
- /* enable the host irq as host controller would be active soon */
- ufshcd_enable_irq(hba);
+ hba->pm_op_in_progress = true;
/*
* Call vendor specific resume callback. As these callbacks may access
@@ -8871,7 +8855,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
*/
ret = ufshcd_vops_resume(hba, pm_op);
if (ret)
- goto disable_irq_and_vops_clks;
+ goto out;
/* For DeepSleep, the only supported option is to have the link off */
WARN_ON(ufshcd_is_ufs_dev_deepsleep(hba) && !ufshcd_is_link_off(hba));
@@ -8919,31 +8903,152 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
if (hba->ee_usr_mask)
ufshcd_write_ee_control(hba);
- hba->clk_gating.is_suspended = false;
-
- if (ufshcd_is_clkscaling_supported(hba))
- ufshcd_clk_scaling_suspend(hba, false);
-
- /* Enable Auto-Hibernate if configured */
- ufshcd_auto_hibern8_enable(hba);
+ if (hba->clk_scaling.is_allowed)
+ ufshcd_resume_clkscaling(hba);
if (hba->dev_info.b_rpm_dev_flush_capable) {
hba->dev_info.b_rpm_dev_flush_capable = false;
cancel_delayed_work(&hba->rpm_dev_flush_recheck_work);
}
- ufshcd_clear_ua_wluns(hba);
-
- /* Schedule clock gating in case of no access to UFS device yet */
- ufshcd_release(hba);
-
+ /* Enable Auto-Hibernate if configured */
+ ufshcd_auto_hibern8_enable(hba);
goto out;
set_old_link_state:
ufshcd_link_state_transition(hba, old_link_state, 0);
vendor_suspend:
ufshcd_vops_suspend(hba, pm_op);
-disable_irq_and_vops_clks:
+out:
+ if (ret)
+ ufshcd_update_evt_hist(hba, UFS_EVT_WL_RES_ERR, (u32)ret);
+ hba->clk_gating.is_suspended = false;
+ ufshcd_release(hba);
+ hba->pm_op_in_progress = false;
+ return ret;
+}
+
+static int ufshcd_wl_runtime_suspend(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ufs_hba *hba;
+ int ret;
+ ktime_t start = ktime_get();
+
+ hba = shost_priv(sdev->host);
+
+ ret = __ufshcd_wl_suspend(hba, UFS_RUNTIME_PM);
+ if (ret)
+ dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
+
+ trace_ufshcd_wl_runtime_suspend(dev_name(dev), ret,
+ ktime_to_us(ktime_sub(ktime_get(), start)),
+ hba->curr_dev_pwr_mode, hba->uic_link_state);
+
+ return ret;
+}
+
+static int ufshcd_wl_runtime_resume(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ufs_hba *hba;
+ int ret = 0;
+ ktime_t start = ktime_get();
+
+ hba = shost_priv(sdev->host);
+
+ ret = __ufshcd_wl_resume(hba, UFS_RUNTIME_PM);
+ if (ret)
+ dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
+
+ trace_ufshcd_wl_runtime_resume(dev_name(dev), ret,
+ ktime_to_us(ktime_sub(ktime_get(), start)),
+ hba->curr_dev_pwr_mode, hba->uic_link_state);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ufshcd_wl_suspend(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ufs_hba *hba;
+ int ret;
+ ktime_t start = ktime_get();
+
+ hba = shost_priv(sdev->host);
+ ret = __ufshcd_wl_suspend(hba, UFS_SYSTEM_PM);
+ if (ret)
+ dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
+
+ trace_ufshcd_wl_suspend(dev_name(dev), ret,
+ ktime_to_us(ktime_sub(ktime_get(), start)),
+ hba->curr_dev_pwr_mode, hba->uic_link_state);
+
+ return ret;
+}
+
+static int ufshcd_wl_resume(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ufs_hba *hba;
+ int ret = 0;
+ ktime_t start = ktime_get();
+
+ if (pm_runtime_suspended(dev))
+ return 0;
+ hba = shost_priv(sdev->host);
+
+ ret = __ufshcd_wl_resume(hba, UFS_SYSTEM_PM);
+ if (ret)
+ dev_err(&sdev->sdev_gendev, "%s failed: %d\n", __func__, ret);
+
+ trace_ufshcd_wl_resume(dev_name(dev), ret,
+ ktime_to_us(ktime_sub(ktime_get(), start)),
+ hba->curr_dev_pwr_mode, hba->uic_link_state);
+
+ return ret;
+}
+#endif
+
+static void ufshcd_wl_shutdown(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ufs_hba *hba;
+
+ hba = shost_priv(sdev->host);
+
+ down(&hba->host_sem);
+ hba->shutting_down = true;
+ up(&hba->host_sem);
+
+ /* Turn on everything while shutting down */
+ scsi_autopm_get_device(sdev);
+ scsi_device_quiesce(sdev);
+ shost_for_each_device(sdev, hba->host) {
+ if (sdev == hba->sdev_ufs_device)
+ continue;
+ scsi_device_quiesce(sdev);
+ }
+ __ufshcd_wl_suspend(hba, UFS_SHUTDOWN_PM);
+}
+
+/**
+ * ufshcd_suspend - helper function for suspend operations
+ * @hba: per adapter instance
+ *
+ * This function will put disable irqs, turn off clocks
+ * and set vreg and hba-vreg in lpm mode.
+ * Also check the description of __ufshcd_wl_suspend().
+ */
+static void ufshcd_suspend(struct ufs_hba *hba)
+{
+ hba->pm_op_in_progress = 1;
+
+ /*
+ * Disable the host irq as host controller as there won't be any
+ * host controller transaction expected till resume.
+ */
ufshcd_disable_irq(hba);
ufshcd_setup_clocks(hba, false);
if (ufshcd_is_clkgating_allowed(hba)) {
@@ -8951,6 +9056,43 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
trace_ufshcd_clk_gating(dev_name(hba->dev),
hba->clk_gating.state);
}
+
+ ufshcd_vreg_set_lpm(hba);
+ /* Put the host controller in low power mode if possible */
+ ufshcd_hba_vreg_set_lpm(hba);
+ hba->pm_op_in_progress = 0;
+}
+
+/**
+ * ufshcd_resume - helper function for resume operations
+ * @hba: per adapter instance
+ *
+ * This function basically turns on the regulators, clocks and
+ * irqs of the hba.
+ * Also check the description of __ufshcd_wl_resume().
+ *
+ * Returns 0 for success and non-zero for failure
+ */
+static int ufshcd_resume(struct ufs_hba *hba)
+{
+ int ret;
+
+ hba->pm_op_in_progress = 1;
+
+ ufshcd_hba_vreg_set_hpm(hba);
+ ret = ufshcd_vreg_set_hpm(hba);
+ if (ret)
+ goto out;
+
+ /* Make sure clocks are enabled before accessing controller */
+ ret = ufshcd_setup_clocks(hba, true);
+ if (ret)
+ goto disable_vreg;
+
+ /* enable the host irq as host controller would be active soon */
+ ufshcd_enable_irq(hba);
+ goto out;
+
disable_vreg:
ufshcd_vreg_set_lpm(hba);
out:
@@ -8965,6 +9107,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
* @hba: per adapter instance
*
* Check the description of ufshcd_suspend() function for more details.
+ * Also check the description of __ufshcd_wl_suspend().
*
* Returns 0 for success and non-zero for failure
*/
@@ -8985,21 +9128,7 @@ int ufshcd_system_suspend(struct ufs_hba *hba)
!hba->dev_info.b_rpm_dev_flush_capable)
goto out;
- if (pm_runtime_suspended(hba->dev)) {
- /*
- * UFS device and/or UFS link low power states during runtime
- * suspend seems to be different than what is expected during
- * system suspend. Hence runtime resume the devic & link and
- * let the system suspend low power states to take effect.
- * TODO: If resume takes longer time, we might have optimize
- * it in future by not resuming everything if possible.
- */
- ret = ufshcd_runtime_resume(hba);
- if (ret)
- goto out;
- }
-
- ret = ufshcd_suspend(hba, UFS_SYSTEM_PM);
+ ufshcd_suspend(hba);
out:
trace_ufshcd_system_suspend(dev_name(hba->dev), ret,
ktime_to_us(ktime_sub(ktime_get(), start)),
@@ -9021,25 +9150,20 @@ EXPORT_SYMBOL(ufshcd_system_suspend);
int ufshcd_system_resume(struct ufs_hba *hba)
{
- int ret = 0;
ktime_t start = ktime_get();
- if (!hba->is_powered || pm_runtime_suspended(hba->dev))
- /*
- * Let the runtime resume take care of resuming
- * if runtime suspended.
- */
+ if (!hba->is_powered)
goto out;
else
- ret = ufshcd_resume(hba, UFS_SYSTEM_PM);
+ ufshcd_resume(hba);
out:
- trace_ufshcd_system_resume(dev_name(hba->dev), ret,
+ trace_ufshcd_system_resume(dev_name(hba->dev), 0,
ktime_to_us(ktime_sub(ktime_get(), start)),
hba->curr_dev_pwr_mode, hba->uic_link_state);
- if (!ret)
- hba->is_sys_suspended = false;
+
+ hba->is_sys_suspended = false;
up(&hba->host_sem);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(ufshcd_system_resume);
@@ -9048,23 +9172,23 @@ EXPORT_SYMBOL(ufshcd_system_resume);
* @hba: per adapter instance
*
* Check the description of ufshcd_suspend() function for more details.
+ * Also check the description of __ufshcd_wl_suspend().
*
* Returns 0 for success and non-zero for failure
*/
int ufshcd_runtime_suspend(struct ufs_hba *hba)
{
- int ret = 0;
ktime_t start = ktime_get();
if (!hba->is_powered)
goto out;
else
- ret = ufshcd_suspend(hba, UFS_RUNTIME_PM);
+ ufshcd_suspend(hba);
out:
- trace_ufshcd_runtime_suspend(dev_name(hba->dev), ret,
+ trace_ufshcd_runtime_suspend(dev_name(hba->dev), 0,
ktime_to_us(ktime_sub(ktime_get(), start)),
hba->curr_dev_pwr_mode, hba->uic_link_state);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(ufshcd_runtime_suspend);
@@ -9072,37 +9196,25 @@ EXPORT_SYMBOL(ufshcd_runtime_suspend);
* ufshcd_runtime_resume - runtime resume routine
* @hba: per adapter instance
*
- * This function basically brings the UFS device, UniPro link and controller
+ * This function basically brings controller
* to active state. Following operations are done in this function:
*
* 1. Turn on all the controller related clocks
- * 2. Bring the UniPro link out of Hibernate state
- * 3. If UFS device is in sleep state, turn ON VCC rail and bring the UFS device
- * to active state.
- * 4. If auto-bkops is enabled on the device, disable it.
- *
- * So following would be the possible power state after this function return
- * successfully:
- * S1: UFS device in Active state with VCC rail ON
- * UniPro link in Active state
- * All the UFS/UniPro controller clocks are ON
- *
- * Returns 0 for success and non-zero for failure
+ * 2. Turn ON VCC rail
*/
int ufshcd_runtime_resume(struct ufs_hba *hba)
{
- int ret = 0;
ktime_t start = ktime_get();
if (!hba->is_powered)
goto out;
else
- ret = ufshcd_resume(hba, UFS_RUNTIME_PM);
+ ufshcd_resume(hba);
out:
- trace_ufshcd_runtime_resume(dev_name(hba->dev), ret,
+ trace_ufshcd_runtime_resume(dev_name(hba->dev), 0,
ktime_to_us(ktime_sub(ktime_get(), start)),
hba->curr_dev_pwr_mode, hba->uic_link_state);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(ufshcd_runtime_resume);
@@ -9116,18 +9228,13 @@ EXPORT_SYMBOL(ufshcd_runtime_idle);
* ufshcd_shutdown - shutdown routine
* @hba: per adapter instance
*
- * This function would power off both UFS device and UFS link.
+ * This function would turn off both UFS device and UFS hba
+ * regulators. It would also disable clocks.
*
* Returns 0 always to allow force shutdown even in case of errors.
*/
int ufshcd_shutdown(struct ufs_hba *hba)
{
- int ret = 0;
-
- down(&hba->host_sem);
- hba->shutting_down = true;
- up(&hba->host_sem);
-
if (!hba->is_powered)
goto out;
@@ -9136,10 +9243,8 @@ int ufshcd_shutdown(struct ufs_hba *hba)
pm_runtime_get_sync(hba->dev);
- ret = ufshcd_suspend(hba, UFS_SHUTDOWN_PM);
+ ufshcd_suspend(hba);
out:
- if (ret)
- dev_err(hba->dev, "%s failed, err %d\n", __func__, ret);
hba->is_powered = false;
/* allow force shutdown even in case of errors */
return 0;
@@ -9153,6 +9258,8 @@ EXPORT_SYMBOL(ufshcd_shutdown);
*/
void ufshcd_remove(struct ufs_hba *hba)
{
+ if (hba->sdev_ufs_device)
+ scsi_autopm_get_device(hba->sdev_ufs_device);
ufs_bsg_remove(hba);
ufs_sysfs_remove_nodes(hba->dev);
blk_cleanup_queue(hba->tmf_queue);
@@ -9456,15 +9563,172 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
}
EXPORT_SYMBOL_GPL(ufshcd_init);
+void ufshcd_resume_complete(struct device *dev)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ pm_runtime_put_noidle(&hba->sdev_ufs_device->sdev_gendev);
+}
+EXPORT_SYMBOL_GPL(ufshcd_resume_complete);
+
+int ufshcd_suspend_prepare(struct device *dev)
+{
+ struct ufs_hba *hba = dev_get_drvdata(dev);
+
+ /*
+ * SCSI assumes that runtime-pm and system-pm for scsi drivers
+ * are same. And it doesn't wake up the device for system-suspend
+ * if it's runtime suspended. But ufs doesn't follow that.
+ * The rpm-lvl and spm-lvl can be different in ufs.
+ * Force it to honor system-suspend.
+ */
+ scsi_autopm_get_device(hba->sdev_ufs_device);
+ /* Refer ufshcd_resume_complete() */
+ pm_runtime_get_noresume(&hba->sdev_ufs_device->sdev_gendev);
+ scsi_autopm_put_device(hba->sdev_ufs_device);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ufshcd_suspend_prepare);
+
+#ifdef CONFIG_PM_SLEEP
+static int ufshcd_wl_poweroff(struct device *dev)
+{
+ ufshcd_wl_shutdown(dev);
+ return 0;
+}
+#endif
+
+static int ufshcd_wl_probe(struct device *dev)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+
+ if (!is_device_wlun(sdev))
+ return -ENODEV;
+
+ blk_pm_runtime_init(sdev->request_queue, dev);
+ pm_runtime_set_autosuspend_delay(dev, 0);
+ pm_runtime_allow(dev);
+
+ return 0;
+}
+
+static int ufshcd_wl_remove(struct device *dev)
+{
+ pm_runtime_forbid(dev);
+ return 0;
+}
+
+static const struct dev_pm_ops ufshcd_wl_pm_ops = {
+#ifdef CONFIG_PM_SLEEP
+ .suspend = ufshcd_wl_suspend,
+ .resume = ufshcd_wl_resume,
+ .freeze = ufshcd_wl_suspend,
+ .thaw = ufshcd_wl_resume,
+ .poweroff = ufshcd_wl_poweroff,
+ .restore = ufshcd_wl_resume,
+#endif
+ SET_RUNTIME_PM_OPS(ufshcd_wl_runtime_suspend, ufshcd_wl_runtime_resume, NULL)
+};
+
+/**
+ * ufs_dev_wlun_template - describes ufs device wlun
+ * ufs-device wlun - used to send pm commands
+ * All luns are consumers of ufs-device wlun.
+ *
+ * Currently, no sd driver is present for wluns.
+ * Hence the no specific pm operations are performed.
+ * With ufs design, SSU should be sent to ufs-device wlun.
+ * Hence register a scsi driver for ufs wluns only.
+ */
+static struct scsi_driver ufs_dev_wlun_template = {
+ .gendrv = {
+ .name = "ufs_device_wlun",
+ .owner = THIS_MODULE,
+ .probe = ufshcd_wl_probe,
+ .remove = ufshcd_wl_remove,
+ .pm = &ufshcd_wl_pm_ops,
+ .shutdown = ufshcd_wl_shutdown,
+ },
+};
+
+static int ufshcd_rpmb_probe(struct device *dev)
+{
+ return is_rpmb_wlun(to_scsi_device(dev)) ? 0 : -ENODEV;
+}
+
+static inline int ufshcd_clear_rpmb_uac(struct ufs_hba *hba)
+{
+ int ret = 0;
+
+ if (!hba->wlun_rpmb_clr_ua)
+ return 0;
+ ret = ufshcd_clear_ua_wlun(hba, UFS_UPIU_RPMB_WLUN);
+ if (!ret)
+ hba->wlun_rpmb_clr_ua = 0;
+ return ret;
+}
+
+static int ufshcd_rpmb_runtime_resume(struct device *dev)
+{
+ struct ufs_hba *hba = wlun_dev_to_hba(dev);
+
+ if (hba->sdev_rpmb)
+ return ufshcd_clear_rpmb_uac(hba);
+ return 0;
+}
+
+static int ufshcd_rpmb_resume(struct device *dev)
+{
+ struct ufs_hba *hba = wlun_dev_to_hba(dev);
+
+ if (hba->sdev_rpmb && !pm_runtime_suspended(dev))
+ return ufshcd_clear_rpmb_uac(hba);
+ return 0;
+}
+
+static const struct dev_pm_ops ufs_rpmb_pm_ops = {
+ SET_RUNTIME_PM_OPS(NULL, ufshcd_rpmb_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(NULL, ufshcd_rpmb_resume)
+};
+
+/**
+ * Describes the ufs rpmb wlun.
+ * Used only to send uac.
+ */
+static struct scsi_driver ufs_rpmb_wlun_template = {
+ .gendrv = {
+ .name = "ufs_rpmb_wlun",
+ .owner = THIS_MODULE,
+ .probe = ufshcd_rpmb_probe,
+ .pm = &ufs_rpmb_pm_ops,
+ },
+};
+
static int __init ufshcd_core_init(void)
{
+ int ret;
+
ufs_debugfs_init();
+
+ ret = scsi_register_driver(&ufs_dev_wlun_template.gendrv);
+ if (ret) {
+ ufs_debugfs_exit();
+ return ret;
+ }
+ ret = scsi_register_driver(&ufs_rpmb_wlun_template.gendrv);
+ if (ret) {
+ ufs_debugfs_exit();
+ scsi_unregister_driver(&ufs_dev_wlun_template.gendrv);
+ return ret;
+ }
return 0;
}
static void __exit ufshcd_core_exit(void)
{
ufs_debugfs_exit();
+ scsi_unregister_driver(&ufs_rpmb_wlun_template.gendrv);
+ scsi_unregister_driver(&ufs_dev_wlun_template.gendrv);
}
module_init(ufshcd_core_init);
@@ -72,6 +72,8 @@ enum ufs_event_type {
UFS_EVT_LINK_STARTUP_FAIL,
UFS_EVT_RESUME_ERR,
UFS_EVT_SUSPEND_ERR,
+ UFS_EVT_WL_SUSP_ERR,
+ UFS_EVT_WL_RES_ERR,
/* abnormal events */
UFS_EVT_DEV_RESET,
@@ -807,6 +809,7 @@ struct ufs_hba {
struct list_head clk_list_head;
bool wlun_dev_clr_ua;
+ bool wlun_rpmb_clr_ua;
/* Number of requests aborts */
int req_abort_count;
@@ -846,6 +849,7 @@ struct ufs_hba {
struct delayed_work debugfs_ee_work;
u32 debugfs_ee_rate_limit_ms;
#endif
+ u32 luns_avail;
};
/* Returns true if clocks can be gated. Otherwise false */
@@ -1105,6 +1109,8 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
enum query_opcode desc_op);
int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
+int ufshcd_suspend_prepare(struct device *dev);
+void ufshcd_resume_complete(struct device *dev);
/* Wrapper functions for safely calling variant operations */
static inline const char *ufshcd_get_var_name(struct ufs_hba *hba)
@@ -246,6 +246,26 @@ DEFINE_EVENT(ufshcd_template, ufshcd_init,
int dev_state, int link_state),
TP_ARGS(dev_name, err, usecs, dev_state, link_state));
+DEFINE_EVENT(ufshcd_template, ufshcd_wl_suspend,
+ TP_PROTO(const char *dev_name, int err, s64 usecs,
+ int dev_state, int link_state),
+ TP_ARGS(dev_name, err, usecs, dev_state, link_state));
+
+DEFINE_EVENT(ufshcd_template, ufshcd_wl_resume,
+ TP_PROTO(const char *dev_name, int err, s64 usecs,
+ int dev_state, int link_state),
+ TP_ARGS(dev_name, err, usecs, dev_state, link_state));
+
+DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_suspend,
+ TP_PROTO(const char *dev_name, int err, s64 usecs,
+ int dev_state, int link_state),
+ TP_ARGS(dev_name, err, usecs, dev_state, link_state));
+
+DEFINE_EVENT(ufshcd_template, ufshcd_wl_runtime_resume,
+ TP_PROTO(const char *dev_name, int err, s64 usecs,
+ int dev_state, int link_state),
+ TP_ARGS(dev_name, err, usecs, dev_state, link_state));
+
TRACE_EVENT(ufshcd_command,
TP_PROTO(const char *dev_name, enum ufs_trace_str_t str_t,
unsigned int tag, u32 doorbell, int transfer_len, u32 intr,