diff mbox series

[net-next,3/7] net: phy: marvell10g: allow 5gabse-r and usxgmii

Message ID 20210324165023.32352-4-kabel@kernel.org
State New
Headers show
Series net: phy: marvell10g updates | expand

Commit Message

Marek Behún March 24, 2021, 4:50 p.m. UTC 
This modes are also supported by this PHYs.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/net/phy/marvell10g.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 567e7900e5b8..70639b9393f3 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -462,9 +462,11 @@  static int mv3310_config_init(struct phy_device *phydev)
 	/* Check that the PHY interface type is compatible */
 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
 	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
+	    phydev->interface != PHY_INTERFACE_MODE_5GBASER &&
 	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
 	    phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
-	    phydev->interface != PHY_INTERFACE_MODE_10GBASER)
+	    phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+	    phydev->interface != PHY_INTERFACE_MODE_USXGMII)
 		return -ENODEV;
 
 	phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
@@ -611,6 +613,9 @@  static void mv3310_update_interface(struct phy_device *phydev)
 		case SPEED_10000:
 			phydev->interface = PHY_INTERFACE_MODE_10GBASER;
 			break;
+		case SPEED_5000:
+			phydev->interface = PHY_INTERFACE_MODE_5GBASER;
+			break;
 		case SPEED_2500:
 			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
 			break;