diff mbox

[v8,1/8] can: c_can: Add timeout to c_can_hw_raminit_ti()

Message ID 1415988591-6032-2-git-send-email-mkl@pengutronix.de
State Accepted
Commit e7e26bc75ba58ab85f329787cb072cf67dd5407f
Headers show

Commit Message

Marc Kleine-Budde Nov. 14, 2014, 6:09 p.m. UTC 
From: Roger Quadros <rogerq@ti.com>

TI's RAMINIT DONE mechanism is buggy on AM43xx SoC and may not always
be set after the START bit is set. Although it seems to work fine even
in that case. So add a timeout mechanism to c_can_hw_raminit_wait_ti().
Don't bail out in that failure case but just print an error message.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/c_can/c_can_platform.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index fb279d6ae484..106c203fc5eb 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -75,10 +75,19 @@  static void c_can_plat_write_reg_aligned_to_32bit(const struct c_can_priv *priv,
 static void c_can_hw_raminit_wait_ti(const struct c_can_priv *priv, u32 mask,
 				  u32 val)
 {
+	int timeout = 0;
+
 	/* We look only at the bits of our instance. */
 	val &= mask;
-	while ((readl(priv->raminit_ctrlreg) & mask) != val)
+	while ((readl(priv->raminit_ctrlreg) & mask) != val) {
 		udelay(1);
+		timeout++;
+
+		if (timeout == 1000) {
+			dev_err(&priv->dev->dev, "%s: time out\n", __func__);
+			break;
+		}
+	}
 }
 
 static void c_can_hw_raminit_ti(const struct c_can_priv *priv, bool enable)