diff mbox series

[v5,3/4] usb: dwc3: qcom: Configure wakeup interrupts and set genpd active wakeup flag

Message ID 1616434280-32635-4-git-send-email-sanm@codeaurora.org
State New
Headers show
Series USB DWC3 host wake up support from system suspend | expand

Commit Message

Sandeep Maheswaram March 22, 2021, 5:31 p.m. UTC
Configure interrupts based on hs_phy_mode to avoid triggering of
interrupts during system suspend and suspends successfully.
Set genpd active wakeup flag for usb gdsc if wakeup capable devices
are connected so that wake up happens without reenumeration.
Add helper functions to enable,disable wake irqs.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
---
 drivers/usb/dwc3/dwc3-qcom.c | 87 ++++++++++++++++++++++++++++----------------
 1 file changed, 56 insertions(+), 31 deletions(-)

Comments

Greg KH March 23, 2021, 12:11 p.m. UTC | #1
On Mon, Mar 22, 2021 at 11:01:19PM +0530, Sandeep Maheswaram wrote:
> Configure interrupts based on hs_phy_mode to avoid triggering of
> interrupts during system suspend and suspends successfully.
> Set genpd active wakeup flag for usb gdsc if wakeup capable devices
> are connected so that wake up happens without reenumeration.
> Add helper functions to enable,disable wake irqs.

That feels like a lot of different things all in one patch.

What are you trying to fix here?  I can't figure it out at all...

Please work on your changelog text for these patches when you resend
them.

thanks,

greg k-h
Matthias Kaehlcke March 24, 2021, 12:49 a.m. UTC | #2
On Tue, Mar 23, 2021 at 01:11:18PM +0100, Greg Kroah-Hartman wrote:
> On Mon, Mar 22, 2021 at 11:01:19PM +0530, Sandeep Maheswaram wrote:
> > Configure interrupts based on hs_phy_mode to avoid triggering of
> > interrupts during system suspend and suspends successfully.
> > Set genpd active wakeup flag for usb gdsc if wakeup capable devices
> > are connected so that wake up happens without reenumeration.
> > Add helper functions to enable,disable wake irqs.
> 
> That feels like a lot of different things all in one patch.

Sandeep: one thing you could do to reduce the churn is to add
dwc3_qcom_enable/disable_wakeup_irq() in a separate patch, without
any functional changes. Then this patch would only add the different
branches based on the PHY mode.

The handling of the power domain could probably also be done in a
separate patch, if I recall correctly it is only an optimization.
Matthias Kaehlcke March 24, 2021, 12:56 a.m. UTC | #3
On Tue, Mar 23, 2021 at 05:49:14PM -0700, Matthias Kaehlcke wrote:
> On Tue, Mar 23, 2021 at 01:11:18PM +0100, Greg Kroah-Hartman wrote:
> > On Mon, Mar 22, 2021 at 11:01:19PM +0530, Sandeep Maheswaram wrote:
> > > Configure interrupts based on hs_phy_mode to avoid triggering of
> > > interrupts during system suspend and suspends successfully.
> > > Set genpd active wakeup flag for usb gdsc if wakeup capable devices
> > > are connected so that wake up happens without reenumeration.
> > > Add helper functions to enable,disable wake irqs.
> > 
> > That feels like a lot of different things all in one patch.
> 
> Sandeep: one thing you could do to reduce the churn is to add
> dwc3_qcom_enable/disable_wakeup_irq() in a separate patch, without
> any functional changes. Then this patch would only add the different
> branches based on the PHY mode.
> 
> The handling of the power domain could probably also be done in a
> separate patch, if I recall correctly it is only an optimization.

Actually another thing that could be in a separate patch is enabling
wakeup support based on 'wakeup-source'. That's not even directly
related with this series.

With all that you'd have fairly atomic patches and it should be easy to
write meaningful commit messages.
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 5149dea..e53228e 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -17,9 +17,11 @@ 
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
 #include <linux/usb/of.h>
 #include <linux/reset.h>
 #include <linux/iopoll.h>
+#include <linux/usb/hcd.h>
 
 #include "core.h"
 
@@ -293,60 +295,77 @@  static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
 	icc_put(qcom->icc_path_apps);
 }
 
+static void dwc3_qcom_enable_wakeup_irq(int irq)
+{
+	if (!irq)
+		return;
+
+	enable_irq(irq);
+	enable_irq_wake(irq);
+}
+
+static void dwc3_qcom_disable_wakeup_irq(int irq)
+{
+	if (!irq)
+		return;
+
+	disable_irq_wake(irq);
+	disable_irq_nosync(irq);
+}
+
 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 {
-	if (qcom->hs_phy_irq) {
-		disable_irq_wake(qcom->hs_phy_irq);
-		disable_irq_nosync(qcom->hs_phy_irq);
-	}
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
-	if (qcom->dp_hs_phy_irq) {
-		disable_irq_wake(qcom->dp_hs_phy_irq);
-		disable_irq_nosync(qcom->dp_hs_phy_irq);
-	}
+	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
 
-	if (qcom->dm_hs_phy_irq) {
-		disable_irq_wake(qcom->dm_hs_phy_irq);
-		disable_irq_nosync(qcom->dm_hs_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	else {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
 	}
 
-	if (qcom->ss_phy_irq) {
-		disable_irq_wake(qcom->ss_phy_irq);
-		disable_irq_nosync(qcom->ss_phy_irq);
-	}
+	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
-	if (qcom->hs_phy_irq) {
-		enable_irq(qcom->hs_phy_irq);
-		enable_irq_wake(qcom->hs_phy_irq);
-	}
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
-	if (qcom->dp_hs_phy_irq) {
-		enable_irq(qcom->dp_hs_phy_irq);
-		enable_irq_wake(qcom->dp_hs_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
 
-	if (qcom->dm_hs_phy_irq) {
-		enable_irq(qcom->dm_hs_phy_irq);
-		enable_irq_wake(qcom->dm_hs_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS)
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+	else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS)
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	else {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
 	}
 
-	if (qcom->ss_phy_irq) {
-		enable_irq(qcom->ss_phy_irq);
-		enable_irq_wake(qcom->ss_phy_irq);
-	}
+	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
 {
 	u32 val;
 	int i, ret;
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct usb_hcd  *hcd;
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
 
 	if (qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci) {
+		hcd = platform_get_drvdata(dwc->xhci);
+		if (usb_wakeup_enabled_descendants(hcd->self.root_hub))
+			genpd->flags |= GENPD_FLAG_ACTIVE_WAKEUP;
+	}
+
 	val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
 	if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
 		dev_err(qcom->dev, "HS-PHY not in L2\n");
@@ -371,9 +390,15 @@  static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
 	int ret;
 	int i;
 
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
+	struct generic_pm_domain *genpd = pd_to_genpd(qcom->dev->pm_domain);
+
 	if (!qcom->is_suspended)
 		return 0;
 
+	if (dwc->xhci)
+		genpd->flags &= ~GENPD_FLAG_ACTIVE_WAKEUP;
+
 	if (device_may_wakeup(qcom->dev))
 		dwc3_qcom_disable_interrupts(qcom);
 
@@ -816,7 +841,7 @@  static int dwc3_qcom_probe(struct platform_device *pdev)
 	if (ret)
 		goto interconnect_exit;
 
-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(&pdev->dev, of_property_read_bool(np, "wakeup-source"));
 	qcom->is_suspended = false;
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);