diff mbox series

[4.9,04/25] net: dsa: b53: Support setting learning on port

Message ID 20210322121920.541213076@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

gregkh@linuxfoundation.org March 22, 2021, 12:28 p.m. UTC 
From: Florian Fainelli <f.fainelli@gmail.com>

commit f9b3827ee66cfcf297d0acd6ecf33653a5f297ef upstream.

Add support for being able to set the learning attribute on port, and
make sure that the standalone ports start up with learning disabled.

We can remove the code in bcm_sf2 that configured the ports learning
attribute because we want the standalone ports to have learning disabled
by default and port 7 cannot be bridged, so its learning attribute will
not change past its initial configuration.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/net/dsa/b53/b53_common.c |   20 ++++++++++++++++++++
 drivers/net/dsa/b53/b53_regs.h   |    1 +
 drivers/net/dsa/bcm_sf2.c        |    5 +++++
 drivers/net/dsa/bcm_sf2_regs.h   |    2 ++
 4 files changed, 28 insertions(+)
diff mbox series

Patch

--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -502,6 +502,19 @@  static void b53_imp_vlan_setup(struct ds
 	}
 }
 
+static void b53_port_set_learning(struct b53_device *dev, int port,
+				  bool learning)
+{
+	u16 reg;
+
+	b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, &reg);
+	if (learning)
+		reg &= ~BIT(port);
+	else
+		reg |= BIT(port);
+	b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg);
+}
+
 static int b53_enable_port(struct dsa_switch *ds, int port,
 			   struct phy_device *phy)
 {
@@ -509,6 +522,8 @@  static int b53_enable_port(struct dsa_sw
 	unsigned int cpu_port = dev->cpu_port;
 	u16 pvlan;
 
+	b53_port_set_learning(dev, port, false);
+
 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0);
 
@@ -552,6 +567,8 @@  static void b53_enable_cpu_port(struct b
 		    PORT_CTRL_RX_MCST_EN |
 		    PORT_CTRL_RX_UCST_EN;
 	b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl);
+
+	b53_port_set_learning(dev, cpu_port, false);
 }
 
 static void b53_enable_mib(struct b53_device *dev)
@@ -1375,6 +1392,8 @@  static int b53_br_join(struct dsa_switch
 	b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan);
 	dev->ports[port].vlan_ctl_mask = pvlan;
 
+	b53_port_set_learning(dev, port, true);
+
 	return 0;
 }
 
@@ -1426,6 +1445,7 @@  static void b53_br_leave(struct dsa_swit
 		vl->untag |= BIT(port) | BIT(dev->cpu_port);
 		b53_set_vlan_entry(dev, pvid, vl);
 	}
+	b53_port_set_learning(dev, port, false);
 }
 
 static void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state)
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -112,6 +112,7 @@ 
 #define B53_UC_FLOOD_MASK		0x32
 #define B53_MC_FLOOD_MASK		0x34
 #define B53_IPMC_FLOOD_MASK		0x36
+#define B53_DIS_LEARNING		0x3c
 
 /*
  * Override Ports 0-7 State on devices with xMII interfaces (8 bit)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -224,6 +224,11 @@  static int bcm_sf2_port_setup(struct dsa
 	reg &= ~P_TXQ_PSM_VDD(port);
 	core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
 
+	/* Disable learning */
+	reg = core_readl(priv, CORE_DIS_LEARN);
+	reg |= BIT(port);
+	core_writel(priv, reg, CORE_DIS_LEARN);
+
 	/* Clear the Rx and Tx disable bits and set to no spanning tree */
 	core_writel(priv, 0, CORE_G_PCTL_PORT(port));
 
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -138,6 +138,8 @@ 
 #define CORE_SWITCH_CTRL		0x00088
 #define  MII_DUMB_FWDG_EN		(1 << 6)
 
+#define CORE_DIS_LEARN			0x000f0
+
 #define CORE_SFT_LRN_CTRL		0x000f8
 #define  SW_LEARN_CNTL(x)		(1 << (x))