diff mbox

[Xen-devel,v3,3/7] xen/arm: Make gic-v2 code handle hip04-d01 platform

Message ID 1415268731-6519-4-git-send-email-frediano.ziglio@huawei.com
State New
Headers show

Commit Message

Frediano Ziglio Nov. 6, 2014, 10:12 a.m. UTC
The GIC in this platform is mainly compatible with the standard
GICv2 beside:
- ITARGET is extended to 16 bit to support 16 CPUs;
- SGI mask is extended to support 16 CPUs;
- maximum supported interrupt is 510.

Use nr_lines to check for maximum irq supported. hip04-d01 support less
interrupts due to some field restriction. Any value above this is already
an error.

Signed-off-by: Frediano Ziglio <frediano.ziglio@huawei.com>
Signed-off-by: Zoltan Kiss <zoltan.kiss@huawei.com>
---
 xen/arch/arm/gic-v2.c     | 85 ++++++++++++++++++++++++++++++++++++++---------
 xen/arch/arm/gic.c        |  3 +-
 xen/include/asm-arm/gic.h |  4 ++-
 3 files changed, 75 insertions(+), 17 deletions(-)
diff mbox

Patch

diff --git a/xen/arch/arm/gic-v2.c b/xen/arch/arm/gic-v2.c
index faad1ff..3cb59dd 100644
--- a/xen/arch/arm/gic-v2.c
+++ b/xen/arch/arm/gic-v2.c
@@ -79,16 +79,25 @@  static struct gic_info gicv2_info;
  * logical CPU numbering. Let's use mapping as returned by the GIC
  * itself
  */
-static DEFINE_PER_CPU(u8, gic_cpu_id);
+static DEFINE_PER_CPU(u16, gic_cpu_id);
 
 /* Maximum cpu interface per GIC */
-#define NR_GIC_CPU_IF 8
+static unsigned int nr_gic_cpu_if = 8;
+static unsigned int gicd_sgi_target_shift = GICD_SGI_TARGET_SHIFT;
+static unsigned int gic_cpu_mask = 0xff;
+
+#define is_hip04() (nr_gic_cpu_if == 16)
 
 static inline void writeb_gicd(uint8_t val, unsigned int offset)
 {
     writeb_relaxed(val, gicv2.map_dbase + offset);
 }
 
+static inline void writew_gicd(uint16_t val, unsigned int offset)
+{
+    writew_relaxed(val, gicv2.map_dbase + offset);
+}
+
 static inline void writel_gicd(uint32_t val, unsigned int offset)
 {
     writel_relaxed(val, gicv2.map_dbase + offset);
@@ -132,7 +141,7 @@  static unsigned int gicv2_cpu_mask(const cpumask_t *cpumask)
     cpumask_and(&possible_mask, cpumask, &cpu_possible_map);
     for_each_cpu( cpu, &possible_mask )
     {
-        ASSERT(cpu < NR_GIC_CPU_IF);
+        ASSERT(cpu < nr_gic_cpu_if);
         mask |= per_cpu(gic_cpu_id, cpu);
     }
 
@@ -203,6 +212,15 @@  static unsigned int gicv2_read_irq(void)
     return (readl_gicc(GICC_IAR) & GICC_IA_IRQ);
 }
 
+/* Set target CPU mask (RAZ/WI on uniprocessor) */
+static void gicv2_set_irq_mask(int irq, unsigned int mask)
+{
+    if ( is_hip04() )
+        writew_gicd(mask, GICD_ITARGETSR + irq * 2);
+    else
+        writeb_gicd(mask, GICD_ITARGETSR + irq);
+}
+
 /*
  * needs to be called with a valid cpu_mask, ie each cpu in the mask has
  * already called gic_cpu_init
@@ -230,7 +248,7 @@  static void gicv2_set_irq_properties(struct irq_desc *desc,
     writel_gicd(cfg, GICD_ICFGR + (irq / 16) * 4);
 
     /* Set target CPU mask (RAZ/WI on uniprocessor) */
-    writeb_gicd(mask, GICD_ITARGETSR + irq);
+    gicv2_set_irq_mask(irq, mask);
     /* Set priority */
     writeb_gicd(priority, GICD_IPRIORITYR + irq);
 
@@ -244,16 +262,21 @@  static void __init gicv2_dist_init(void)
     uint32_t gic_cpus;
     int i;
 
-    cpumask = readl_gicd(GICD_ITARGETSR) & 0xff;
-    cpumask |= cpumask << 8;
-    cpumask |= cpumask << 16;
+    cpumask = readl_gicd(GICD_ITARGETSR) & gic_cpu_mask;
 
     /* Disable the distributor */
     writel_gicd(0, GICD_CTLR);
 
     type = readl_gicd(GICD_TYPER);
     gicv2_info.nr_lines = 32 * ((type & GICD_TYPE_LINES) + 1);
-    gic_cpus = 1 + ((type & GICD_TYPE_CPUS) >> 5);
+    if ( is_hip04() )
+    {
+        gic_cpus = 16;
+    }
+    else
+    {
+        gic_cpus = 1 + ((type & GICD_TYPE_CPUS) >> 5);
+    }
     printk("GICv2: %d lines, %d cpu%s%s (IID %8.8x).\n",
            gicv2_info.nr_lines, gic_cpus, (gic_cpus == 1) ? "" : "s",
            (type & GICD_TYPE_SEC) ? ", secure" : "",
@@ -264,8 +287,19 @@  static void __init gicv2_dist_init(void)
         writel_gicd(0x0, GICD_ICFGR + (i / 16) * 4);
 
     /* Route all global IRQs to this CPU */
-    for ( i = 32; i < gicv2_info.nr_lines; i += 4 )
-        writel_gicd(cpumask, GICD_ITARGETSR + (i / 4) * 4);
+    if ( is_hip04() )
+    {
+        cpumask |= cpumask << 16;
+        for ( i = 32; i < gicv2_info.nr_lines; i += 2 )
+            writel_gicd(cpumask, GICD_ITARGETSR + (i / 2) * 4);
+    }
+    else
+    {
+        cpumask |= cpumask << 8;
+        cpumask |= cpumask << 16;
+        for ( i = 32; i < gicv2_info.nr_lines; i += 4 )
+            writel_gicd(cpumask, GICD_ITARGETSR + (i / 4) * 4);
+    }
 
     /* Default priority for global interrupts */
     for ( i = 32; i < gicv2_info.nr_lines; i += 4 )
@@ -285,7 +319,7 @@  static void __cpuinit gicv2_cpu_init(void)
 {
     int i;
 
-    this_cpu(gic_cpu_id) = readl_gicd(GICD_ITARGETSR) & 0xff;
+    this_cpu(gic_cpu_id) = readl_gicd(GICD_ITARGETSR) & gic_cpu_mask;
 
     /* The first 32 interrupts (PPI and SGI) are banked per-cpu, so
      * even though they are controlled with GICD registers, they must
@@ -366,7 +400,7 @@  static void gicv2_send_SGI(enum gic_sgi sgi, enum gic_sgi_mode irqmode,
         cpumask_and(&online_mask, cpu_mask, &cpu_online_map);
         mask = gicv2_cpu_mask(&online_mask);
         writel_gicd(GICD_SGI_TARGET_LIST |
-                    (mask << GICD_SGI_TARGET_SHIFT) | sgi,
+                    (mask << gicd_sgi_target_shift) | sgi,
                     GICD_SGIR);
         break;
     default:
@@ -581,7 +615,7 @@  static void gicv2_irq_set_affinity(struct irq_desc *desc, const cpumask_t *cpu_m
     mask = gicv2_cpu_mask(cpu_mask);
 
     /* Set target CPU mask (RAZ/WI on uniprocessor) */
-    writeb_gicd(mask, GICD_ITARGETSR + desc->irq);
+    gicv2_set_irq_mask(desc->irq, mask);
 
     spin_unlock(&gicv2.lock);
 }
@@ -684,7 +718,7 @@  const static struct gic_hw_operations gicv2_ops = {
 };
 
 /* Set up the GIC */
-static int __init gicv2_init(struct dt_device_node *node, const void *data)
+static int __init gicv2_init_default(struct dt_device_node *node, const void *data)
 {
     int res;
 
@@ -764,6 +798,15 @@  static int __init gicv2_init(struct dt_device_node *node, const void *data)
     return 0;
 }
 
+static int __init hip04_gicv2_init(struct dt_device_node *node, const void *data)
+{
+    nr_gic_cpu_if = 16;
+    gicd_sgi_target_shift = 8;
+    gic_cpu_mask = 0xffff;
+
+    return gicv2_init_default(node, data);
+}
+
 static const char * const gicv2_dt_compat[] __initconst =
 {
     DT_COMPAT_GIC_CORTEX_A15,
@@ -774,9 +817,21 @@  static const char * const gicv2_dt_compat[] __initconst =
 
 DT_DEVICE_START(gicv2, "GICv2:", DEVICE_GIC)
         .compatible = gicv2_dt_compat,
-        .init = gicv2_init,
+        .init = gicv2_init_default,
 DT_DEVICE_END
 
+static const char * const hip04_gicv2_dt_compat[] __initconst =
+{
+    DT_COMPAT_GIC_HIP04,
+    NULL
+};
+
+DT_DEVICE_START(hip04_gicv2, "GICv2:", DEVICE_GIC)
+        .compatible = hip04_gicv2_dt_compat,
+        .init = hip04_gicv2_init,
+DT_DEVICE_END
+
+
 /*
  * Local variables:
  * mode: C
diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index 70d10d6..8050a65 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -563,12 +563,13 @@  static void do_sgi(struct cpu_user_regs *regs, enum gic_sgi sgi)
 void gic_interrupt(struct cpu_user_regs *regs, int is_fiq)
 {
     unsigned int irq;
+    unsigned int max_irq = gic_hw_ops->info->nr_lines;
 
     do  {
         /* Reading IRQ will ACK it */
         irq = gic_hw_ops->read_irq();
 
-        if ( likely(irq >= 16 && irq < 1021) )
+        if ( likely(irq >= 16 && irq < max_irq) )
         {
             local_irq_enable();
             do_IRQ(regs, irq, is_fiq);
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 187dc46..c880867 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -155,10 +155,12 @@ 
 #define DT_COMPAT_GIC_400            "arm,gic-400"
 #define DT_COMPAT_GIC_CORTEX_A15     "arm,cortex-a15-gic"
 #define DT_COMPAT_GIC_CORTEX_A7      "arm,cortex-a7-gic"
+#define DT_COMPAT_GIC_HIP04          "hisilicon,hip04-intc"
 
 #define DT_MATCH_GIC_V2 DT_MATCH_COMPATIBLE(DT_COMPAT_GIC_CORTEX_A15), \
                         DT_MATCH_COMPATIBLE(DT_COMPAT_GIC_CORTEX_A7), \
-                        DT_MATCH_COMPATIBLE(DT_COMPAT_GIC_400)
+                        DT_MATCH_COMPATIBLE(DT_COMPAT_GIC_400), \
+                        DT_MATCH_COMPATIBLE(DT_COMPAT_GIC_HIP04)
 
 #define DT_COMPAT_GIC_V3             "arm,gic-v3"