| Message ID | 20210316195100.3531414-1-robh@kernel.org |
|---|---|
| State | New |
| Headers | show |
| Series | dt-bindings: media: video-interfaces: Use documented bindings in example | expand |
Hi Rob, Thank you for the patch. On Tue, Mar 16, 2021 at 01:51:00PM -0600, Rob Herring wrote: > The example in video-interfaces.yaml managed to use a bunch of undocumented > bindings. Update the example to use real bindings (and ones with a schema). > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Cc: linux-media@vger.kernel.org > Signed-off-by: Rob Herring <robh@kernel.org> > --- > .../bindings/media/video-interfaces.yaml | 75 ++++++++----------- > 1 file changed, 33 insertions(+), 42 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml > index 0a7a73fd59f2..f30b9b91717b 100644 > --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml > @@ -227,17 +227,12 @@ examples: > # only one of the following data pipelines can be active: > # ov772x -> ceu0 or imx074 -> csi2 -> ceu0. > - | > + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/r8a7796-sysc.h> > + > ceu@fe910000 { > - compatible = "renesas,sh-mobile-ceu"; > reg = <0xfe910000 0xa0>; > - interrupts = <0x880>; > - > - mclk: master_clock { > - compatible = "renesas,ceu-clock"; > - #clock-cells = <1>; > - clock-frequency = <50000000>; /* Max clock frequency */ > - clock-output-names = "mclk"; > - }; > > port { > #address-cells = <1>; > @@ -271,18 +266,14 @@ examples: > #size-cells = <0>; > > camera@21 { > - compatible = "ovti,ov772x"; > + compatible = "ovti,ov7720"; > reg = <0x21>; > - vddio-supply = <®ulator1>; > - vddcore-supply = <®ulator2>; > - > - clock-frequency = <20000000>; > clocks = <&mclk 0>; > - clock-names = "xclk"; > > port { > /* With 1 endpoint per port no need for addresses. */ > ov772x_1_1: endpoint { > + bus-type = <5>; > bus-width = <8>; > remote-endpoint = <&ceu0_1>; > hsync-active = <1>; > @@ -295,48 +286,48 @@ examples: > }; > > camera@1a { > - compatible = "sony,imx074"; > + compatible = "sony,imx334"; > reg = <0x1a>; > - vddio-supply = <®ulator1>; > - vddcore-supply = <®ulator2>; > > - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ > clocks = <&mclk 0>; > - clock-names = "sysclk"; /* Assuming this is the > - name in the datasheet */ > + > port { > - imx074_1: endpoint { > + imx334_1: endpoint { > clock-lanes = <0>; > data-lanes = <1 2>; > + link-frequencies = /bits/ 64 <891000000>; > remote-endpoint = <&csi2_1>; > }; > }; > }; > }; > > - csi2: csi2@ffc90000 { > - compatible = "renesas,sh-mobile-csi2"; > - reg = <0xffc90000 0x1000>; > - interrupts = <0x17a0>; > - #address-cells = <1>; > - #size-cells = <0>; > + csi2@fea80000 { > + compatible = "renesas,r8a7796-csi2"; That's certainly better, but the r8a7796 doesn't have a CEU :-) It has a VIN. Maybe we could copy the last example from renesas,vin.yaml to replace the CEU ? > + reg = <0xfea80000 0x10000>; > + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 714>; > + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; > + resets = <&cpg 714>; > > - port@1 { > - compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ > - reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, > - PHY_M has port address 0, > - is unused. */ > - csi2_1: endpoint { > - clock-lanes = <0>; > - data-lanes = <2 1>; > - remote-endpoint = <&imx074_1>; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + csi2_1: endpoint { > + clock-lanes = <0>; > + data-lanes = <2 1>; > + remote-endpoint = <&imx334_1>; > + }; > }; > - }; > - port@2 { > - reg = <2>; /* port 2: link to the CEU */ > + port@1 { > + reg = <1>; > > - csi2_2: endpoint { > - remote-endpoint = <&ceu0_0>; > + csi2_2: endpoint { > + remote-endpoint = <&ceu0_0>; > + }; > }; > }; > }; -- Regards, Laurent Pinchart
On Tue, Mar 16, 2021 at 2:48 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Rob, > > Thank you for the patch. > > On Tue, Mar 16, 2021 at 01:51:00PM -0600, Rob Herring wrote: > > The example in video-interfaces.yaml managed to use a bunch of undocumented > > bindings. Update the example to use real bindings (and ones with a schema). > > > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Cc: linux-media@vger.kernel.org > > Signed-off-by: Rob Herring <robh@kernel.org> > > --- > > .../bindings/media/video-interfaces.yaml | 75 ++++++++----------- > > 1 file changed, 33 insertions(+), 42 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml > > index 0a7a73fd59f2..f30b9b91717b 100644 > > --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml > > @@ -227,17 +227,12 @@ examples: > > # only one of the following data pipelines can be active: > > # ov772x -> ceu0 or imx074 -> csi2 -> ceu0. > > - | > > + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/power/r8a7796-sysc.h> > > + > > ceu@fe910000 { > > - compatible = "renesas,sh-mobile-ceu"; > > reg = <0xfe910000 0xa0>; > > - interrupts = <0x880>; > > - > > - mclk: master_clock { > > - compatible = "renesas,ceu-clock"; > > - #clock-cells = <1>; > > - clock-frequency = <50000000>; /* Max clock frequency */ > > - clock-output-names = "mclk"; > > - }; > > > > port { > > #address-cells = <1>; > > @@ -271,18 +266,14 @@ examples: > > #size-cells = <0>; > > > > camera@21 { > > - compatible = "ovti,ov772x"; > > + compatible = "ovti,ov7720"; > > reg = <0x21>; > > - vddio-supply = <®ulator1>; > > - vddcore-supply = <®ulator2>; > > - > > - clock-frequency = <20000000>; > > clocks = <&mclk 0>; > > - clock-names = "xclk"; > > > > port { > > /* With 1 endpoint per port no need for addresses. */ > > ov772x_1_1: endpoint { > > + bus-type = <5>; > > bus-width = <8>; > > remote-endpoint = <&ceu0_1>; > > hsync-active = <1>; > > @@ -295,48 +286,48 @@ examples: > > }; > > > > camera@1a { > > - compatible = "sony,imx074"; > > + compatible = "sony,imx334"; > > reg = <0x1a>; > > - vddio-supply = <®ulator1>; > > - vddcore-supply = <®ulator2>; > > > > - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ > > clocks = <&mclk 0>; > > - clock-names = "sysclk"; /* Assuming this is the > > - name in the datasheet */ > > + > > port { > > - imx074_1: endpoint { > > + imx334_1: endpoint { > > clock-lanes = <0>; > > data-lanes = <1 2>; > > + link-frequencies = /bits/ 64 <891000000>; > > remote-endpoint = <&csi2_1>; > > }; > > }; > > }; > > }; > > > > - csi2: csi2@ffc90000 { > > - compatible = "renesas,sh-mobile-csi2"; > > - reg = <0xffc90000 0x1000>; > > - interrupts = <0x17a0>; > > - #address-cells = <1>; > > - #size-cells = <0>; > > + csi2@fea80000 { > > + compatible = "renesas,r8a7796-csi2"; > > That's certainly better, but the r8a7796 doesn't have a CEU :-) It has a > VIN. Maybe we could copy the last example from renesas,vin.yaml to > replace the CEU ? What about just removing the example here? It bothers me to have 2 copies (maybe 3 with sensor schemas) of an example and we should have plenty of examples. On the flip side, it's nice to have this stand on its own. Another option would be just remove compatibles and make the example barebones with only what's defined in video-interfaces.yaml. But then it's not validated at all. Rob
Hi Rob, On Tue, Mar 16, 2021 at 03:09:10PM -0600, Rob Herring wrote: > On Tue, Mar 16, 2021 at 2:48 PM Laurent Pinchart wrote: > > On Tue, Mar 16, 2021 at 01:51:00PM -0600, Rob Herring wrote: > > > The example in video-interfaces.yaml managed to use a bunch of undocumented > > > bindings. Update the example to use real bindings (and ones with a schema). > > > > > > Cc: Mauro Carvalho Chehab <mchehab@kernel.org> > > > Cc: Sakari Ailus <sakari.ailus@linux.intel.com> > > > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > Cc: linux-media@vger.kernel.org > > > Signed-off-by: Rob Herring <robh@kernel.org> > > > --- > > > .../bindings/media/video-interfaces.yaml | 75 ++++++++----------- > > > 1 file changed, 33 insertions(+), 42 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml > > > index 0a7a73fd59f2..f30b9b91717b 100644 > > > --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml > > > +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml > > > @@ -227,17 +227,12 @@ examples: > > > # only one of the following data pipelines can be active: > > > # ov772x -> ceu0 or imx074 -> csi2 -> ceu0. > > > - | > > > + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> > > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > > + #include <dt-bindings/power/r8a7796-sysc.h> > > > + > > > ceu@fe910000 { > > > - compatible = "renesas,sh-mobile-ceu"; > > > reg = <0xfe910000 0xa0>; > > > - interrupts = <0x880>; > > > - > > > - mclk: master_clock { > > > - compatible = "renesas,ceu-clock"; > > > - #clock-cells = <1>; > > > - clock-frequency = <50000000>; /* Max clock frequency */ > > > - clock-output-names = "mclk"; > > > - }; > > > > > > port { > > > #address-cells = <1>; > > > @@ -271,18 +266,14 @@ examples: > > > #size-cells = <0>; > > > > > > camera@21 { > > > - compatible = "ovti,ov772x"; > > > + compatible = "ovti,ov7720"; > > > reg = <0x21>; > > > - vddio-supply = <®ulator1>; > > > - vddcore-supply = <®ulator2>; > > > - > > > - clock-frequency = <20000000>; > > > clocks = <&mclk 0>; > > > - clock-names = "xclk"; > > > > > > port { > > > /* With 1 endpoint per port no need for addresses. */ > > > ov772x_1_1: endpoint { > > > + bus-type = <5>; > > > bus-width = <8>; > > > remote-endpoint = <&ceu0_1>; > > > hsync-active = <1>; > > > @@ -295,48 +286,48 @@ examples: > > > }; > > > > > > camera@1a { > > > - compatible = "sony,imx074"; > > > + compatible = "sony,imx334"; > > > reg = <0x1a>; > > > - vddio-supply = <®ulator1>; > > > - vddcore-supply = <®ulator2>; > > > > > > - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ > > > clocks = <&mclk 0>; > > > - clock-names = "sysclk"; /* Assuming this is the > > > - name in the datasheet */ > > > + > > > port { > > > - imx074_1: endpoint { > > > + imx334_1: endpoint { > > > clock-lanes = <0>; > > > data-lanes = <1 2>; > > > + link-frequencies = /bits/ 64 <891000000>; > > > remote-endpoint = <&csi2_1>; > > > }; > > > }; > > > }; > > > }; > > > > > > - csi2: csi2@ffc90000 { > > > - compatible = "renesas,sh-mobile-csi2"; > > > - reg = <0xffc90000 0x1000>; > > > - interrupts = <0x17a0>; > > > - #address-cells = <1>; > > > - #size-cells = <0>; > > > + csi2@fea80000 { > > > + compatible = "renesas,r8a7796-csi2"; > > > > That's certainly better, but the r8a7796 doesn't have a CEU :-) It has a > > VIN. Maybe we could copy the last example from renesas,vin.yaml to > > replace the CEU ? > > What about just removing the example here? It bothers me to have 2 > copies (maybe 3 with sensor schemas) of an example and we should have > plenty of examples. I'd be fine with that. > On the flip side, it's nice to have this stand on its own. Another > option would be just remove compatibles and make the example barebones > with only what's defined in video-interfaces.yaml. Abstract examples seem good in this context. > But then it's not validated at all. But this part isn't nice :-( If we keep examples that use real bindings, they should match the real hardware platforms. Other than that, I have no strong preference, it's up to you. -- Regards, Laurent Pinchart
diff --git a/Documentation/devicetree/bindings/media/video-interfaces.yaml b/Documentation/devicetree/bindings/media/video-interfaces.yaml index 0a7a73fd59f2..f30b9b91717b 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.yaml +++ b/Documentation/devicetree/bindings/media/video-interfaces.yaml @@ -227,17 +227,12 @@ examples: # only one of the following data pipelines can be active: # ov772x -> ceu0 or imx074 -> csi2 -> ceu0. - | + #include <dt-bindings/clock/r8a7796-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7796-sysc.h> + ceu@fe910000 { - compatible = "renesas,sh-mobile-ceu"; reg = <0xfe910000 0xa0>; - interrupts = <0x880>; - - mclk: master_clock { - compatible = "renesas,ceu-clock"; - #clock-cells = <1>; - clock-frequency = <50000000>; /* Max clock frequency */ - clock-output-names = "mclk"; - }; port { #address-cells = <1>; @@ -271,18 +266,14 @@ examples: #size-cells = <0>; camera@21 { - compatible = "ovti,ov772x"; + compatible = "ovti,ov7720"; reg = <0x21>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - - clock-frequency = <20000000>; clocks = <&mclk 0>; - clock-names = "xclk"; port { /* With 1 endpoint per port no need for addresses. */ ov772x_1_1: endpoint { + bus-type = <5>; bus-width = <8>; remote-endpoint = <&ceu0_1>; hsync-active = <1>; @@ -295,48 +286,48 @@ examples: }; camera@1a { - compatible = "sony,imx074"; + compatible = "sony,imx334"; reg = <0x1a>; - vddio-supply = <®ulator1>; - vddcore-supply = <®ulator2>; - clock-frequency = <30000000>; /* Shared clock with ov772x_1 */ clocks = <&mclk 0>; - clock-names = "sysclk"; /* Assuming this is the - name in the datasheet */ + port { - imx074_1: endpoint { + imx334_1: endpoint { clock-lanes = <0>; data-lanes = <1 2>; + link-frequencies = /bits/ 64 <891000000>; remote-endpoint = <&csi2_1>; }; }; }; }; - csi2: csi2@ffc90000 { - compatible = "renesas,sh-mobile-csi2"; - reg = <0xffc90000 0x1000>; - interrupts = <0x17a0>; - #address-cells = <1>; - #size-cells = <0>; + csi2@fea80000 { + compatible = "renesas,r8a7796-csi2"; + reg = <0xfea80000 0x10000>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 714>; - port@1 { - compatible = "renesas,csi2c"; /* One of CSI2I and CSI2C. */ - reg = <1>; /* CSI-2 PHY #1 of 2: PHY_S, - PHY_M has port address 0, - is unused. */ - csi2_1: endpoint { - clock-lanes = <0>; - data-lanes = <2 1>; - remote-endpoint = <&imx074_1>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + csi2_1: endpoint { + clock-lanes = <0>; + data-lanes = <2 1>; + remote-endpoint = <&imx334_1>; + }; }; - }; - port@2 { - reg = <2>; /* port 2: link to the CEU */ + port@1 { + reg = <1>; - csi2_2: endpoint { - remote-endpoint = <&ceu0_0>; + csi2_2: endpoint { + remote-endpoint = <&ceu0_0>; + }; }; }; };
The example in video-interfaces.yaml managed to use a bunch of undocumented bindings. Update the example to use real bindings (and ones with a schema). Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: linux-media@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> --- .../bindings/media/video-interfaces.yaml | 75 ++++++++----------- 1 file changed, 33 insertions(+), 42 deletions(-) -- 2.27.0