@@ -91,7 +91,7 @@ static DEFINE_MUTEX(set_freq_lock);
/* Use 800MHz when entering sleep mode */
#define SLEEP_FREQ (800 * 1000)
-/* Tracks if cpu freqency can be updated anymore */
+/* Tracks if cpu frequency can be updated anymore */
static bool no_cpufreq_access;
/*
@@ -190,7 +190,7 @@ static u32 clkdiv_val[5][11] = {
/*
* This function set DRAM refresh counter
- * accoriding to operating frequency of DRAM
+ * according to operating frequency of DRAM
* ch: DMC port number 0 or 1
* freq: Operating frequency of DRAM(KHz)
*/
@@ -378,7 +378,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
/*
* 6. Turn on APLL
* 6-1. Set PMS values
- * 6-2. Wait untile the PLL is locked
+ * 6-2. Wait until the PLL is locked
*/
if (index == L0)
writel_relaxed(APLL_VAL_1000, S5P_APLL_CON);
@@ -390,7 +390,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
} while (!(reg & (0x1 << 29)));
/*
- * 7. Change souce clock from SCLKMPLL(667Mhz)
+ * 7. Change source clock from SCLKMPLL(667Mhz)
* to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
* (667/4=166)->(200/4=50)Mhz
*/
@@ -439,7 +439,7 @@ static int s5pv210_target(struct cpufreq_policy *policy, unsigned int index)
}
/*
- * L4 level need to change memory bus speed, hence onedram clock divier
+ * L4 level need to change memory bus speed, hence onedram clock divider
* and memory refresh parameter should be changed
*/
if (bus_speed_changing) {
change 'freqency' to 'frequency' change 'accoriding' to 'according' change 'untile' to 'until' change 'souce' to 'source' change 'divier' to 'divider' Signed-off-by: Xiaofeng Cao <caoxiaofeng@yulong.com> --- drivers/cpufreq/s5pv210-cpufreq.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)