new file mode 100644
@@ -0,0 +1,21 @@
+GPIO based EXTCON
+
+EXTCON GPIO
+-----------
+
+Required Properties:
+ - compatible: should be:
+ * "linux,extcon-gpio"
+ - gpios: specifies the gpio pin used.
+
+Optional Properties:
+ - debounce: Debounce time for GPIO IRQ in ms
+
+
+Eg:
+
+ extcon1: am43_usbid_extcon1 {
+ compatible = "linux,extcon-gpio";
+ gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+ debounce = <20>;
+ };
@@ -25,8 +25,10 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
@@ -80,16 +82,12 @@ static ssize_t extcon_gpio_print_state(struct extcon_dev *edev, char *buf)
static int gpio_extcon_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct gpio_extcon_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct gpio_extcon_data *extcon_data;
int ret;
-
- if (!pdata)
- return -EBUSY;
- if (!pdata->irq_flags) {
- dev_err(&pdev->dev, "IRQ flag is not specified.\n");
- return -EINVAL;
- }
+ unsigned int irq_flags;
+ unsigned int debounce = 0;
extcon_data = devm_kzalloc(&pdev->dev, sizeof(struct gpio_extcon_data),
GFP_KERNEL);
@@ -101,26 +99,51 @@ static int gpio_extcon_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
- extcon_data->edev->name = pdata->name;
-
- extcon_data->gpiod = gpio_to_desc(pdata->gpio);
- extcon_data->state_on = pdata->state_on;
- extcon_data->state_off = pdata->state_off;
- extcon_data->check_on_resume = pdata->check_on_resume;
- if (pdata->state_on && pdata->state_off)
- extcon_data->edev->print_state = extcon_gpio_print_state;
- ret = devm_gpio_request_one(&pdev->dev, pdata->gpio, GPIOF_DIR_IN,
- pdev->name);
- if (ret < 0)
- return ret;
+ if (np) {
+ int irq;
+
+ extcon_data->gpiod = devm_gpiod_get(&pdev->dev, NULL);
+ if (IS_ERR(extcon_data->gpiod))
+ return PTR_ERR(extcon_data->gpiod);
+
+ extcon_data->edev->name = np->name;
+ extcon_data->edev->dev.parent = &pdev->dev;
+ of_property_read_u32(np, "debounce", &debounce);
+ irq = gpiod_to_irq(extcon_data->gpiod);
+ irq_flags = irq_get_trigger_type(irq);
+ } else {
+ if (!pdata)
+ return -EBUSY;
+
+ if (!pdata->irq_flags) {
+ dev_err(&pdev->dev, "IRQ flag is not specified.\n");
+ return -EINVAL;
+ }
+
+ extcon_data->edev->name = pdata->name;
+
+ extcon_data->gpiod = gpio_to_desc(pdata->gpio);
+ extcon_data->state_on = pdata->state_on;
+ extcon_data->state_off = pdata->state_off;
+ extcon_data->check_on_resume = pdata->check_on_resume;
+ if (pdata->state_on && pdata->state_off)
+ extcon_data->edev->print_state = extcon_gpio_print_state;
+
+ ret = devm_gpio_request_one(&pdev->dev, pdata->gpio, GPIOF_DIR_IN,
+ pdev->name);
+ if (ret < 0)
+ return ret;
+ irq_flags = pdata->irq_flags;
+ debounce = pdata->debounce;
+ }
- if (pdata->debounce) {
+ if (debounce) {
ret = gpiod_set_debounce(extcon_data->gpiod,
- pdata->debounce * 1000);
+ debounce * 1000);
if (ret < 0)
extcon_data->debounce_jiffies =
- msecs_to_jiffies(pdata->debounce);
+ msecs_to_jiffies(debounce);
}
ret = devm_extcon_dev_register(&pdev->dev, extcon_data->edev);
@@ -134,7 +157,7 @@ static int gpio_extcon_probe(struct platform_device *pdev)
return extcon_data->irq;
ret = request_any_context_irq(extcon_data->irq, gpio_irq_handler,
- pdata->irq_flags, pdev->name,
+ irq_flags, pdev->name,
extcon_data);
if (ret < 0)
return ret;
@@ -172,6 +195,11 @@ static int gpio_extcon_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
+static struct of_device_id of_extcon_gpio_match_tbl[] = {
+ { .compatible = "linux,extcon-gpio", },
+ { /* end */ }
+};
+
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
.remove = gpio_extcon_remove,
@@ -179,6 +207,7 @@ static struct platform_driver gpio_extcon_driver = {
.name = "extcon-gpio",
.owner = THIS_MODULE,
.pm = &gpio_extcon_pm_ops,
+ .of_match_table = of_extcon_gpio_match_tbl,
},
};