diff mbox

[v2,6/6] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build

Message ID CAJuYYwSB3f8BPQx1jgsSykKKMMGsbeCCj7zSLp2-+gtonBrdVw@mail.gmail.com
State New
Headers show

Commit Message

thomas.abraham@linaro.org Sept. 8, 2011, 9:10 a.m. UTC 
Dear Mr. Kim,

On 5 September 2011 10:47, Kukjin Kim <kgene.kim@samsung.com> wrote:
>> Subject: [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device instance
> to
>> non-dt build
>>
>> The pl330 device instances and associated platform data is required only
>> for non-device-tree builds. With device tree, all of this information is
>> obtained from the device tree.
>>
>> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
>> ---
>>  arch/arm/mach-exynos4/Kconfig  |    7 +++++++
>>  arch/arm/mach-exynos4/Makefile |    3 ++-
>>  2 files changed, 9 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
>> index d4d401c..3edbf37 100644
>> --- a/arch/arm/mach-exynos4/Kconfig
>> +++ b/arch/arm/mach-exynos4/Kconfig
>> @@ -21,6 +21,13 @@ config EXYNOS4_MCT
>>       help
>>         Use MCT (Multi Core Timer) as kernel timers
>>
>> +config EXYNOS4_DEV_DMA
>> +     bool
>> +     default y if !OF
>> +     help
>> +       Compile in amba device definitions for DMA controller if OF
>> +       is not enabled.
>> +
>>  config EXYNOS4_DEV_AHCI
>>       bool
>>       help
>> diff --git a/arch/arm/mach-exynos4/Makefile
> b/arch/arm/mach-exynos4/Makefile
>> index d2bf5bf..a2f33dc 100644
>> --- a/arch/arm/mach-exynos4/Makefile
>> +++ b/arch/arm/mach-exynos4/Makefile
>> @@ -13,7 +13,8 @@ obj-                                :=
>>  # Core support for EXYNOS4 system
>>
>>  obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
>> -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
>> pmu.o
>> +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o pmu.o
>> +obj-$(CONFIG_EXYNOS4_DEV_DMA)        += dma.o
>
> Do we need _really_ EXYNOS4_DEV_DMA here?
> How about to use like following?
>
> +obj-$(!CONFIG_OF)              += dma.o
>
> If any problems, let me know.

While trying out your suggestion, I found a issue with this patch
related to compiling a kernel with both dt and non-dt board files
included in the build.

When compiling a single kernel image with mach-smdkv310.c file and
exynos4 device tree enabled machine file, since CONFIG_OF is enabled,
dma platform data does not get compiled which is required for
mach-smdkv310. So, I would like to resubmit this patch and the updated

Thanks,
Thomas.

Comments

Kukjin Kim Sept. 19, 2011, 10:26 a.m. UTC | #1 
Thomas Abraham wrote:
> 
> Dear Mr. Kim,
> 
> On 5 September 2011 10:47, Kukjin Kim <kgene.kim@samsung.com> wrote:
> >> Subject: [PATCH v2 6/6] ARM: EXYNOS4: Limit usage of pl330 device
instance
> > to
> >> non-dt build
> >>
> >> The pl330 device instances and associated platform data is required
only
> >> for non-device-tree builds. With device tree, all of this information
is
> >> obtained from the device tree.
> >>
> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
> >> ---
> >>  arch/arm/mach-exynos4/Kconfig  |    7 +++++++
> >>  arch/arm/mach-exynos4/Makefile |    3 ++-
> >>  2 files changed, 9 insertions(+), 1 deletions(-)
> >>
> >> diff --git a/arch/arm/mach-exynos4/Kconfig
b/arch/arm/mach-exynos4/Kconfig
> >> index d4d401c..3edbf37 100644
> >> --- a/arch/arm/mach-exynos4/Kconfig
> >> +++ b/arch/arm/mach-exynos4/Kconfig
> >> @@ -21,6 +21,13 @@ config EXYNOS4_MCT
> >>       help
> >>         Use MCT (Multi Core Timer) as kernel timers
> >>
> >> +config EXYNOS4_DEV_DMA
> >> +     bool
> >> +     default y if !OF
> >> +     help
> >> +       Compile in amba device definitions for DMA controller if OF
> >> +       is not enabled.
> >> +
> >>  config EXYNOS4_DEV_AHCI
> >>       bool
> >>       help
> >> diff --git a/arch/arm/mach-exynos4/Makefile
> > b/arch/arm/mach-exynos4/Makefile
> >> index d2bf5bf..a2f33dc 100644
> >> --- a/arch/arm/mach-exynos4/Makefile
> >> +++ b/arch/arm/mach-exynos4/Makefile
> >> @@ -13,7 +13,8 @@ obj-                                :=
> >>  # Core support for EXYNOS4 system
> >>
> >>  obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
> >> -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
> >> pmu.o
> >> +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o pmu.o
> >> +obj-$(CONFIG_EXYNOS4_DEV_DMA)        += dma.o
> >
> > Do we need _really_ EXYNOS4_DEV_DMA here?
> > How about to use like following?
> >
> > +obj-$(!CONFIG_OF)              += dma.o
> >
> > If any problems, let me know.
> 
> While trying out your suggestion, I found a issue with this patch
> related to compiling a kernel with both dt and non-dt board files
> included in the build.
> 
> When compiling a single kernel image with mach-smdkv310.c file and
> exynos4 device tree enabled machine file, since CONFIG_OF is enabled,
> dma platform data does not get compiled which is required for
> mach-smdkv310. So, I would like to resubmit this patch and the updated
> diff is listed below. Could you please review the following diff.
> 

Hi Thomas,

Oops, you're right...so following is ok to me but you need to rebase this
based on latest my tree.

If any problems, please let me know.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

> 
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index d4d401c..953ead7 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -21,6 +21,11 @@ config EXYNOS4_MCT
>  	help
>  	  Use MCT (Multi Core Timer) as kernel timers
> 
> +config EXYNOS4_DEV_DMA
> +	bool
> +	help
> +	  Compile in amba device definitions for DMA controller
> +
>  config EXYNOS4_DEV_AHCI
>  	bool
>  	help
> @@ -129,6 +134,7 @@ config MACH_SMDKC210
>  	select EXYNOS4_SETUP_FIMD0
>  	select EXYNOS4_SETUP_I2C1
>  	select EXYNOS4_SETUP_SDHCI
> +	select EXYNOS4_DEV_DMA
>  	help
>  	  Machine support for Samsung SMDKC210
> 
> @@ -153,6 +159,7 @@ config MACH_SMDKV310
>  	select EXYNOS4_SETUP_I2C1
>  	select EXYNOS4_SETUP_KEYPAD
>  	select EXYNOS4_SETUP_SDHCI
> +	select EXYNOS4_DEV_DMA
>  	help
>  	  Machine support for Samsung SMDKV310
> 
> @@ -191,6 +198,7 @@ config MACH_UNIVERSAL_C210
>  	select EXYNOS4_SETUP_I2C3
>  	select EXYNOS4_SETUP_I2C5
>  	select EXYNOS4_SETUP_SDHCI
> +	select EXYNOS4_DEV_DMA
>  	help
>  	  Machine support for Samsung Mobile Universal S5PC210 Reference
>  	  Board.
> @@ -215,6 +223,7 @@ config MACH_NURI
>  	select EXYNOS4_SETUP_USB_PHY
>  	select SAMSUNG_DEV_PWM
>  	select SAMSUNG_DEV_ADC
> +	select EXYNOS4_DEV_DMA
>  	help
>  	  Machine support for Samsung Mobile NURI Board.
> 
> diff --git a/arch/arm/mach-exynos4/Makefile
b/arch/arm/mach-exynos4/Makefile
> index 929262a..a2f33dc 100644
> --- a/arch/arm/mach-exynos4/Makefile
> +++ b/arch/arm/mach-exynos4/Makefile
> @@ -14,7 +14,8 @@ obj-				:=
> 
>  obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
> -obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o
> pmu.o
> +obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o pmu.o
> +obj-$(CONFIG_EXYNOS4_DEV_DMA)	+= dma.o
>  obj-$(CONFIG_PM)		+= pm.o sleep.o
>  obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
> 
> 
> 
> Thanks,
> Thomas.
diff mbox

Patch

diff is listed below. Could you please review the following diff.


diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index d4d401c..953ead7 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -21,6 +21,11 @@  config EXYNOS4_MCT
 	help
 	  Use MCT (Multi Core Timer) as kernel timers

+config EXYNOS4_DEV_DMA
+	bool
+	help
+	  Compile in amba device definitions for DMA controller
+
 config EXYNOS4_DEV_AHCI
 	bool
 	help
@@ -129,6 +134,7 @@  config MACH_SMDKC210
 	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_DEV_DMA
 	help
 	  Machine support for Samsung SMDKC210

@@ -153,6 +159,7 @@  config MACH_SMDKV310
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_DEV_DMA
 	help
 	  Machine support for Samsung SMDKV310

@@ -191,6 +198,7 @@  config MACH_UNIVERSAL_C210
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C5
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_DEV_DMA
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -215,6 +223,7 @@  config MACH_NURI
 	select EXYNOS4_SETUP_USB_PHY
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_ADC
+	select EXYNOS4_DEV_DMA
 	help
 	  Machine support for Samsung Mobile NURI Board.

diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 929262a..a2f33dc 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -14,7 +14,8 @@  obj-				:=

 obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o pmu.o
+obj-$(CONFIG_EXYNOS4_DEV_DMA)	+= dma.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o