diff mbox series

[5.11,22/36] scsi: ufs: ufs-exynos: Apply vendor-specific values for three timeouts

Message ID 20210310132321.205838523@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH March 10, 2021, 1:23 p.m. UTC 
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

From: Kiwoong Kim <kwmad.kim@samsung.com>

[ Upstream commit a967ddb22d94eb476ccef983b5f2730fa4d184d0 ]

Set optimized values for the following timeouts:

 - FC0_PROTECTION_TIMER
 - TC0_REPLAY_TIMER
 - AFC0_REQUEST_TIMER

Exynos doesn't yet use traffic class #1.

Link: https://lore.kernel.org/r/a0ff44f665a4f31d2f945fd71de03571204c576c.1608513782.git.kwmad.kim@samsung.com
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufs-exynos.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/scsi/ufs/ufs-exynos.c b/drivers/scsi/ufs/ufs-exynos.c
index a8770ff14588..5ca21d1550df 100644
--- a/drivers/scsi/ufs/ufs-exynos.c
+++ b/drivers/scsi/ufs/ufs-exynos.c
@@ -640,6 +640,11 @@  static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba,
 		}
 	}
 
+	/* setting for three timeout values for traffic class #0 */
+	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA0), 8064);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA1), 28224);
+	ufshcd_dme_set(hba, UIC_ARG_MIB(PA_PWRMODEUSERDATA2), 20160);
+
 	return 0;
 out:
 	return ret;
@@ -1236,7 +1241,8 @@  struct exynos_ufs_drv_data exynos_ufs_drvs = {
 				  UFSHCI_QUIRK_BROKEN_HCE |
 				  UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR |
 				  UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR |
-				  UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL,
+				  UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL |
+				  UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING,
 	.opts			= EXYNOS_UFS_OPT_HAS_APB_CLK_CTRL |
 				  EXYNOS_UFS_OPT_BROKEN_AUTO_CLK_CTRL |
 				  EXYNOS_UFS_OPT_BROKEN_RX_SEL_IDX |