| Message ID | 20210309162315.22743-1-a-govindraju@ti.com |
|---|---|
| State | Accepted |
| Commit | 4fb6c04683aa5b45f3876f45465e13265e09eb56 |
| Headers | show |
| Series | [v2] arm64: dts: ti: k3-am642-evm: Add support for SPI EEPROM | expand |
On Tue, 9 Mar 2021 21:53:15 +0530, Aswath Govindraju wrote: > Add pinmux details and device tree node for the EEPROM attached to SPI0 > module in main domain. Hi Aswath Govindraju, I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/1] arm64: dts: ti: k3-am642-evm: Add support for SPI EEPROM commit: 4fb6c04683aa5b45f3876f45465e13265e09eb56 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git -- Regards, Nishanth Menon Key (0xDDB5849D1736249D)/Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 1f1787750fef..f5a8c5c4c8c3 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -127,6 +127,15 @@ >; }; + main_spi0_pins_default: main-spi0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ + AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ + AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ + AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ + >; + }; + main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ @@ -227,6 +236,19 @@ status = "disabled"; }; +&main_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi0_pins_default>; + ti,pindir-d0-out-d1-in = <1>; + eeprom@0 { + compatible = "microchip,93lc46b"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cs-high; + data-size = <16>; + }; +}; + &sdhci0 { /* emmc */ bus-width = <8>;