diff mbox series

[1/3] arm64: dts: qcom: sm8150: add other QUP nodes

Message ID 20210310163024.393578-2-caleb@connolly.tech
State New
Headers show
Series [1/3] arm64: dts: qcom: sm8150: add other QUP nodes | expand

Commit Message

Caleb Connolly March 10, 2021, 4:31 p.m. UTC
Add the first and third qupv3 nodes used to hook
up peripherals on some devices.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

Comments

Bhupesh Sharma March 15, 2021, 7:17 p.m. UTC | #1
Hello Caleb,

On Wed, 10 Mar 2021 at 22:02, Caleb Connolly <caleb@connolly.tech> wrote:
>
> Add the first and third qupv3 nodes used to hook
> up peripherals on some devices.
>
> Signed-off-by: Caleb Connolly <caleb@connolly.tech>
> ---
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index e5bb17bc2f46..03e05d98daf2 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -577,6 +577,18 @@ gcc: clock-controller@100000 {
>                                  <&sleep_clk>;
>                 };
>
> +               qupv3_id_0: geniqup@8c0000 {
> +                       compatible = "qcom,geni-se-qup";
> +                       reg = <0x0 0x008c0000 0x0 0x6000>;
> +                       clock-names = "m-ahb", "s-ahb";
> +                       clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +                                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       status = "disabled";
> +               };
> +
>                 qupv3_id_1: geniqup@ac0000 {
>                         compatible = "qcom,geni-se-qup";
>                         reg = <0x0 0x00ac0000 0x0 0x6000>;
> @@ -598,6 +610,19 @@ uart2: serial@a90000 {
>                         };
>                 };
>
> +               qupv3_id_2: geniqup@cc0000 {
> +                       compatible = "qcom,geni-se-qup";
> +                       reg = <0x0 0x00cc0000 0x0 0x6000>;
> +
> +                       clock-names = "m-ahb", "s-ahb";
> +                       clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
> +                                <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
> +                       #address-cells = <2>;
> +                       #size-cells = <2>;
> +                       ranges;
> +                       status = "disabled";
> +               };
> +
>                 config_noc: interconnect@1500000 {
>                         compatible = "qcom,sm8150-config-noc";
>                         reg = <0 0x01500000 0 0x7400>;

LGTM, so:
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index e5bb17bc2f46..03e05d98daf2 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -577,6 +577,18 @@  gcc: clock-controller@100000 {
 				 <&sleep_clk>;
 		};
 
+		qupv3_id_0: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+		};
+
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
@@ -598,6 +610,19 @@  uart2: serial@a90000 {
 			};
 		};
 
+		qupv3_id_2: geniqup@cc0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x00cc0000 0x0 0x6000>;
+
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+		};
+
 		config_noc: interconnect@1500000 {
 			compatible = "qcom,sm8150-config-noc";
 			reg = <0 0x01500000 0 0x7400>;