diff mbox series

[1/2] Bluetooth: Notify suspend on le conn failed

Message ID 20210301120602.1.Ia32a022edc307a4cb0c93dc18d52b6c5f97db23b@changeid
State New
Headers show
Series Bluetooth: Suspend improvements | expand

Commit Message

Abhishek Pandit-Subedi March 1, 2021, 8:06 p.m. UTC
When suspending, Bluetooth disconnects all connected peers devices. If
an LE connection is started but isn't completed, we will see an LE
Create Connection Cancel instead of an HCI disconnect. This just adds
a check to see if an LE cancel was the last disconnected device and wake
the suspend thread when that is the case.

Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
---
Here is an HCI trace when the issue occurred.

< HCI Command: LE Create Connection (0x08|0x000d) plen 25                                           #187777 [hci0] 2021-02-03 21:42:35.130208
        Scan interval: 60.000 msec (0x0060)
        Scan window: 60.000 msec (0x0060)
        Filter policy: White list is not used (0x00)
        Peer address type: Random (0x01)
        Peer address: D9:DC:6B:61:EB:3A (Static)
        Own address type: Public (0x00)
        Min connection interval: 15.00 msec (0x000c)
        Max connection interval: 30.00 msec (0x0018)
        Connection latency: 20 (0x0014)
        Supervision timeout: 3000 msec (0x012c)
        Min connection length: 0.000 msec (0x0000)
        Max connection length: 0.000 msec (0x0000)
> HCI Event: Command Status (0x0f) plen 4                                                           #187778 [hci0] 2021-02-03 21:42:35.131184
      LE Create Connection (0x08|0x000d) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0                                     #187805 [hci0] 2021-02-03 21:42:37.183336
> HCI Event: Command Complete (0x0e) plen 4                                                         #187806 [hci0] 2021-02-03 21:42:37.192394
      LE Create Connection Cancel (0x08|0x000e) ncmd 1
        Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 19                                                           #187807 [hci0] 2021-02-03 21:42:37.193400
      LE Connection Complete (0x01)
        Status: Unknown Connection Identifier (0x02)
        Handle: 0
        Role: Master (0x00)
        Peer address type: Random (0x01)
        Peer address: D9:DC:6B:61:EB:3A (Static)
        Connection interval: 0.00 msec (0x0000)
        Connection latency: 0 (0x0000)
        Supervision timeout: 0 msec (0x0000)
        Master clock accuracy: 0x00
... <skip a few unrelated events>
@ MGMT Event: Controller Suspended (0x002d) plen 1                                                 {0x0002} [hci0] 2021-02-03 21:42:39.178780
        Suspend state: Controller running (failed to suspend) (0)
@ MGMT Event: Controller Suspended (0x002d) plen 1                                                 {0x0001} [hci0] 2021-02-03 21:42:39.178780
        Suspend state: Controller running (failed to suspend) (0)
... <actual suspended time>
< HCI Command: Set Event Filter (0x03|0x0005) plen 1                                                #187808 [hci0] 2021-02-04 09:23:07.313591
        Type: Clear All Filters (0x00)

 net/bluetooth/hci_conn.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Marcel Holtmann March 2, 2021, 2:03 p.m. UTC | #1
Hi Abhishek,

> When suspending, Bluetooth disconnects all connected peers devices. If

> an LE connection is started but isn't completed, we will see an LE

> Create Connection Cancel instead of an HCI disconnect. This just adds

> a check to see if an LE cancel was the last disconnected device and wake

> the suspend thread when that is the case.

> 

> Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>

> Reviewed-by: Archie Pusaka <apusaka@chromium.org>

> ---

> Here is an HCI trace when the issue occurred.

> 

> < HCI Command: LE Create Connection (0x08|0x000d) plen 25                                           #187777 [hci0] 2021-02-03 21:42:35.130208

>        Scan interval: 60.000 msec (0x0060)

>        Scan window: 60.000 msec (0x0060)

>        Filter policy: White list is not used (0x00)

>        Peer address type: Random (0x01)

>        Peer address: D9:DC:6B:61:EB:3A (Static)

>        Own address type: Public (0x00)

>        Min connection interval: 15.00 msec (0x000c)

>        Max connection interval: 30.00 msec (0x0018)

>        Connection latency: 20 (0x0014)

>        Supervision timeout: 3000 msec (0x012c)

>        Min connection length: 0.000 msec (0x0000)

>        Max connection length: 0.000 msec (0x0000)

>> HCI Event: Command Status (0x0f) plen 4                                                           #187778 [hci0] 2021-02-03 21:42:35.131184

>      LE Create Connection (0x08|0x000d) ncmd 1

>        Status: Success (0x00)

> < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0                                     #187805 [hci0] 2021-02-03 21:42:37.183336

>> HCI Event: Command Complete (0x0e) plen 4                                                         #187806 [hci0] 2021-02-03 21:42:37.192394

>      LE Create Connection Cancel (0x08|0x000e) ncmd 1

>        Status: Success (0x00)

>> HCI Event: LE Meta Event (0x3e) plen 19                                                           #187807 [hci0] 2021-02-03 21:42:37.193400

>      LE Connection Complete (0x01)

>        Status: Unknown Connection Identifier (0x02)

>        Handle: 0

>        Role: Master (0x00)

>        Peer address type: Random (0x01)

>        Peer address: D9:DC:6B:61:EB:3A (Static)

>        Connection interval: 0.00 msec (0x0000)

>        Connection latency: 0 (0x0000)

>        Supervision timeout: 0 msec (0x0000)

>        Master clock accuracy: 0x00

> ... <skip a few unrelated events>

> @ MGMT Event: Controller Suspended (0x002d) plen 1                                                 {0x0002} [hci0] 2021-02-03 21:42:39.178780

>        Suspend state: Controller running (failed to suspend) (0)

> @ MGMT Event: Controller Suspended (0x002d) plen 1                                                 {0x0001} [hci0] 2021-02-03 21:42:39.178780

>        Suspend state: Controller running (failed to suspend) (0)

> ... <actual suspended time>

> < HCI Command: Set Event Filter (0x03|0x0005) plen 1                                                #187808 [hci0] 2021-02-04 09:23:07.313591

>        Type: Clear All Filters (0x00)

> 

> net/bluetooth/hci_conn.c | 10 ++++++++++

> 1 file changed, 10 insertions(+)


patch has been applied to bluetooth-next tree.

Regards

Marcel
diff mbox series

Patch

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 6ffa89e3ba0a85..468d31f3303d7a 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -772,6 +772,16 @@  void hci_le_conn_failed(struct hci_conn *conn, u8 status)
 
 	hci_conn_del(conn);
 
+	/* The suspend notifier is waiting for all devices to disconnect and an
+	 * LE connect cancel will result in an hci_le_conn_failed. Once the last
+	 * connection is deleted, we should also wake the suspend queue to
+	 * complete suspend operations.
+	 */
+	if (list_empty(&hdev->conn_hash.list) &&
+	    test_and_clear_bit(SUSPEND_DISCONNECTING, hdev->suspend_tasks)) {
+		wake_up(&hdev->suspend_wait_q);
+	}
+
 	/* Since we may have temporarily stopped the background scanning in
 	 * favor of connection establishment, we should restart it.
 	 */