diff mbox series

[V3,2/2] backlight: qcom-wled: Correct the sync_toggle sequence

Message ID 1614590916-27070-3-git-send-email-kgunda@codeaurora.org
State Superseded
Headers show
Series Fix WLED FSC Sync and brightness Sync settings | expand

Commit Message

Kiran Gunda March 1, 2021, 9:28 a.m. UTC
As per the current implementation, after FSC (Full Scale Current)
and brightness update the sync bits are transitioned from set-then-clear.
But, the FSC and brightness sync takes place during a clear-then-set
transition of the sync bits. So the hardware team recommends a
clear-then-set approach in order to guarantee such a transition
regardless of the previous register state.

Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
---
 drivers/video/backlight/qcom-wled.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Daniel Thompson March 1, 2021, 10:02 a.m. UTC | #1
On Mon, Mar 01, 2021 at 02:58:36PM +0530, Kiran Gunda wrote:
> As per the current implementation, after FSC (Full Scale Current)
> and brightness update the sync bits are transitioned from set-then-clear.

This does not makes sense since there are too many verbs. Set and clear
are both verbs so in this context: "the code will set the bit and then
the code will clear the bit".

Either:

s/transitioned from set-then-clear/set-then-cleared/.

Or:

s/transitioned from set-then-clear/using a set-then-clear approach/.

> But, the FSC and brightness sync takes place during a clear-then-set
> transition of the sync bits.

Likewise this no longer makes sense and had also become misleading.
Two changes of state, clear and then set, do not usually result in a
single transition.

Either:

s/clear-then-set/0 to 1/

Alternatively, if you want to stick exclusively to the set/clear
terminology then replace the whole quoted section with:

  But, the FSC and brightness sync takes place when the sync bits are
  set (e.g. on a rising edge).


> So the hardware team recommends a
> clear-then-set approach in order to guarantee such a transition
> regardless of the previous register state.
> 
> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>

With one of each of the changes proposed above:
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.


> ---
>  drivers/video/backlight/qcom-wled.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
> index aef52b9..19f83ac 100644
> --- a/drivers/video/backlight/qcom-wled.c
> +++ b/drivers/video/backlight/qcom-wled.c
> @@ -337,13 +337,13 @@ static int wled3_sync_toggle(struct wled *wled)
>  
>  	rc = regmap_update_bits(wled->regmap,
>  				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
> -				mask, mask);
> +				mask, WLED3_SINK_REG_SYNC_CLEAR);
>  	if (rc < 0)
>  		return rc;
>  
>  	rc = regmap_update_bits(wled->regmap,
>  				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
> -				mask, WLED3_SINK_REG_SYNC_CLEAR);
> +				mask, mask);
>  
>  	return rc;
>  }
> @@ -353,17 +353,17 @@ static int wled5_mod_sync_toggle(struct wled *wled)
>  	int rc;
>  	u8 val;
>  
> -	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
> -					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
>  	rc = regmap_update_bits(wled->regmap,
>  				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
> -				WLED5_SINK_REG_SYNC_MASK, val);
> +				WLED5_SINK_REG_SYNC_MASK, 0);
>  	if (rc < 0)
>  		return rc;
>  
> +	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
> +					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
>  	return regmap_update_bits(wled->regmap,
>  				  wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
> -				  WLED5_SINK_REG_SYNC_MASK, 0);
> +				  WLED5_SINK_REG_SYNC_MASK, val);
>  }
>  
>  static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>  a Linux Foundation Collaborative Project
>
Kiran Gunda March 1, 2021, 4:42 p.m. UTC | #2
On 2021-03-01 15:32, Daniel Thompson wrote:
> On Mon, Mar 01, 2021 at 02:58:36PM +0530, Kiran Gunda wrote:
>> As per the current implementation, after FSC (Full Scale Current)
>> and brightness update the sync bits are transitioned from 
>> set-then-clear.
> 
> This does not makes sense since there are too many verbs. Set and clear
> are both verbs so in this context: "the code will set the bit and then
> the code will clear the bit".
> 
> Either:
> 
> s/transitioned from set-then-clear/set-then-cleared/.
> 
> Or:
> 
> s/transitioned from set-then-clear/using a set-then-clear approach/.
> 
>> But, the FSC and brightness sync takes place during a clear-then-set
>> transition of the sync bits.
> 
> Likewise this no longer makes sense and had also become misleading.
> Two changes of state, clear and then set, do not usually result in a
> single transition.
> 
> Either:
> 
> s/clear-then-set/0 to 1/
> 
> Alternatively, if you want to stick exclusively to the set/clear
> terminology then replace the whole quoted section with:
> 
>   But, the FSC and brightness sync takes place when the sync bits are
>   set (e.g. on a rising edge).
> 
> 
>> So the hardware team recommends a
>> clear-then-set approach in order to guarantee such a transition
>> regardless of the previous register state.
>> 
>> Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
> 
> With one of each of the changes proposed above:
> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
> 
> 
> Daniel.
> 
Apologies for the mistake. I have corrected and submitted the
V4 series with the "reviewed-by" tag.
> 
>> ---
>>  drivers/video/backlight/qcom-wled.c | 12 ++++++------
>>  1 file changed, 6 insertions(+), 6 deletions(-)
>> 
>> diff --git a/drivers/video/backlight/qcom-wled.c 
>> b/drivers/video/backlight/qcom-wled.c
>> index aef52b9..19f83ac 100644
>> --- a/drivers/video/backlight/qcom-wled.c
>> +++ b/drivers/video/backlight/qcom-wled.c
>> @@ -337,13 +337,13 @@ static int wled3_sync_toggle(struct wled *wled)
>> 
>>  	rc = regmap_update_bits(wled->regmap,
>>  				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
>> -				mask, mask);
>> +				mask, WLED3_SINK_REG_SYNC_CLEAR);
>>  	if (rc < 0)
>>  		return rc;
>> 
>>  	rc = regmap_update_bits(wled->regmap,
>>  				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
>> -				mask, WLED3_SINK_REG_SYNC_CLEAR);
>> +				mask, mask);
>> 
>>  	return rc;
>>  }
>> @@ -353,17 +353,17 @@ static int wled5_mod_sync_toggle(struct wled 
>> *wled)
>>  	int rc;
>>  	u8 val;
>> 
>> -	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
>> -					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
>>  	rc = regmap_update_bits(wled->regmap,
>>  				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
>> -				WLED5_SINK_REG_SYNC_MASK, val);
>> +				WLED5_SINK_REG_SYNC_MASK, 0);
>>  	if (rc < 0)
>>  		return rc;
>> 
>> +	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
>> +					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
>>  	return regmap_update_bits(wled->regmap,
>>  				  wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
>> -				  WLED5_SINK_REG_SYNC_MASK, 0);
>> +				  WLED5_SINK_REG_SYNC_MASK, val);
>>  }
>> 
>>  static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>>  a Linux Foundation Collaborative Project
>>
diff mbox series

Patch

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index aef52b9..19f83ac 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -337,13 +337,13 @@  static int wled3_sync_toggle(struct wled *wled)
 
 	rc = regmap_update_bits(wled->regmap,
 				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
-				mask, mask);
+				mask, WLED3_SINK_REG_SYNC_CLEAR);
 	if (rc < 0)
 		return rc;
 
 	rc = regmap_update_bits(wled->regmap,
 				wled->ctrl_addr + WLED3_SINK_REG_SYNC,
-				mask, WLED3_SINK_REG_SYNC_CLEAR);
+				mask, mask);
 
 	return rc;
 }
@@ -353,17 +353,17 @@  static int wled5_mod_sync_toggle(struct wled *wled)
 	int rc;
 	u8 val;
 
-	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
-					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
 	rc = regmap_update_bits(wled->regmap,
 				wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
-				WLED5_SINK_REG_SYNC_MASK, val);
+				WLED5_SINK_REG_SYNC_MASK, 0);
 	if (rc < 0)
 		return rc;
 
+	val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT :
+					     WLED5_SINK_REG_SYNC_MOD_B_BIT;
 	return regmap_update_bits(wled->regmap,
 				  wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT,
-				  WLED5_SINK_REG_SYNC_MASK, 0);
+				  WLED5_SINK_REG_SYNC_MASK, val);
 }
 
 static int wled_ovp_fault_status(struct wled *wled, bool *fault_set)