@@ -723,8 +723,12 @@ static void c_can_do_tx(struct net_device *dev)
struct net_device_stats *stats = &dev->stats;
u32 idx, obj, pkts = 0, bytes = 0, pend, clr;
- clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+ if (priv->msg_obj_tx_last > 32)
+ pend = priv->read_reg32(priv, C_CAN_INTPND3_REG);
+ else
+ pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+ clr = pend;
while ((idx = ffs(pend))) {
idx--;
pend &= ~(1 << idx);
@@ -834,7 +838,12 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
static inline u32 c_can_get_pending(struct c_can_priv *priv)
{
- u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
+ u32 pend;
+
+ if (priv->msg_obj_rx_last > 16)
+ pend = priv->read_reg32(priv, C_CAN_NEWDAT1_REG);
+ else
+ pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
return pend;
}
@@ -856,12 +865,6 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
struct c_can_priv *priv = netdev_priv(dev);
u32 pkts = 0, pend = 0, toread, n;
- /*
- * It is faster to read only one 16bit register. This is only possible
- * for a maximum number of 16 objects.
- */
- WARN_ON(priv->msg_obj_rx_last > 16);
-
while (quota > 0) {
if (!pend) {
pend = c_can_get_pending(priv);
@@ -22,8 +22,6 @@
#ifndef C_CAN_H
#define C_CAN_H
-#define C_CAN_NO_OF_OBJECTS 32
-
enum reg {
C_CAN_CTRL_REG = 0,
C_CAN_CTRL_EX_REG,
@@ -61,6 +59,7 @@ enum reg {
C_CAN_NEWDAT2_REG,
C_CAN_INTPND1_REG,
C_CAN_INTPND2_REG,
+ C_CAN_INTPND3_REG,
C_CAN_MSGVAL1_REG,
C_CAN_MSGVAL2_REG,
C_CAN_FUNCTION_REG,
@@ -122,6 +121,7 @@ static const u16 __maybe_unused reg_map_d_can[] = {
[C_CAN_NEWDAT2_REG] = 0x9E,
[C_CAN_INTPND1_REG] = 0xB0,
[C_CAN_INTPND2_REG] = 0xB2,
+ [C_CAN_INTPND3_REG] = 0xB4,
[C_CAN_MSGVAL1_REG] = 0xC4,
[C_CAN_MSGVAL2_REG] = 0xC6,
[C_CAN_IF1_COMREQ_REG] = 0x100,
@@ -161,6 +161,7 @@ struct raminit_bits {
struct c_can_driver_data {
enum c_can_dev_id id;
+ int msg_obj_num;
/* RAMINIT register description. Optional. */
const struct raminit_bits *raminit_bits; /* Array of START/DONE bit positions */
@@ -192,10 +192,12 @@ static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
static const struct c_can_driver_data c_can_drvdata = {
.id = BOSCH_C_CAN,
+ .msg_obj_num = 32,
};
static const struct c_can_driver_data d_can_drvdata = {
.id = BOSCH_D_CAN,
+ .msg_obj_num = 32,
};
static const struct raminit_bits dra7_raminit_bits[] = {
@@ -205,6 +207,7 @@ static const struct raminit_bits dra7_raminit_bits[] = {
static const struct c_can_driver_data dra7_dcan_drvdata = {
.id = BOSCH_D_CAN,
+ .msg_obj_num = 64,
.raminit_num = ARRAY_SIZE(dra7_raminit_bits),
.raminit_bits = dra7_raminit_bits,
.raminit_pulse = true,
@@ -217,6 +220,7 @@ static const struct raminit_bits am3352_raminit_bits[] = {
static const struct c_can_driver_data am3352_dcan_drvdata = {
.id = BOSCH_D_CAN,
+ .msg_obj_num = 64,
.raminit_num = ARRAY_SIZE(am3352_raminit_bits),
.raminit_bits = am3352_raminit_bits,
};
@@ -293,7 +297,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
}
/* allocate the c_can device */
- dev = alloc_c_can_dev(C_CAN_NO_OF_OBJECTS);
+ dev = alloc_c_can_dev(drvdata->msg_obj_num);
if (!dev) {
ret = -ENOMEM;
goto exit;
D_CAN controller supports 16, 32, 64 or 128 messages objects, comparing to 32 on C_CAN. AM335x/AM437x Sitara processors and DRA7 SOC all instantiate a D_CAN controller with 64 message objects, as described in the "DCAN features" subsection of the CAN chapter of their technical reference manuals. The driver policy has been kept unchanged, and as in the previous version, the first half of the message objects is used for reception and the second for transmission. The I/O load is increased only in the case of 64 message objects, keeping it unchanged in the case of 32. Two 32-bit read accesses are in fact required, which however remained at 16-bit for configurations with 32 message objects. Signed-off-by: Dario Binacchi <dariobin@libero.it> --- drivers/net/can/c_can/c_can.c | 19 +++++++++++-------- drivers/net/can/c_can/c_can.h | 5 +++-- drivers/net/can/c_can/c_can_platform.c | 6 +++++- 3 files changed, 19 insertions(+), 11 deletions(-)