diff mbox series

[PATCHv1,2/4] ARM: dts: imx: ba16: improve PHY information

Message ID 20210223183346.138575-3-sebastian.reichel@collabora.com
State New
Headers show
Series Bx50v3 DT improvements | expand

Commit Message

Sebastian Reichel Feb. 23, 2021, 6:33 p.m. UTC
Add PHY voltage supply information fixing the following kernel message:

2188000.ethernet supply phy not found, using dummy regulator

Also add PHY clock information to avoid depending on the bootloader
programming correct values.

The bootloader also sets some reserved registers in the PHY as
advised by Qualcomm, which is not supported by the bindings/kernel
driver, so the reset GPIO has not been added intentionally.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm/boot/dts/imx6q-ba16.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Shawn Guo March 8, 2021, 12:38 a.m. UTC | #1
On Tue, Feb 23, 2021 at 07:33:44PM +0100, Sebastian Reichel wrote:
> Add PHY voltage supply information fixing the following kernel message:

> 

> 2188000.ethernet supply phy not found, using dummy regulator

> 

> Also add PHY clock information to avoid depending on the bootloader

> programming correct values.

> 

> The bootloader also sets some reserved registers in the PHY as

> advised by Qualcomm, which is not supported by the bindings/kernel

> driver, so the reset GPIO has not been added intentionally.

> 

> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

> ---

>  arch/arm/boot/dts/imx6q-ba16.dtsi | 12 ++++++++++++

>  1 file changed, 12 insertions(+)

> 

> diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi

> index 4793ef5171aa..a684d999e605 100644

> --- a/arch/arm/boot/dts/imx6q-ba16.dtsi

> +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi

> @@ -177,6 +177,18 @@ &fec {

>  	pinctrl-0 = <&pinctrl_enet>;

>  	phy-mode = "rgmii-id";

>  	status = "okay";

> +	phy-supply = <&reg_3p3v>;

> +	phy-handle = <&phy0>;


Please keep 'status' at end.

Shawn

> +

> +	mdio {

> +		#address-cells = <1>;

> +		#size-cells = <0>;

> +

> +		phy0: ethernet-phy@4 {

> +			reg = <4>;

> +			qca,clk-out-frequency = <125000000>;

> +		};

> +	};

>  };

>  

>  &hdmi {

> -- 

> 2.30.0

>
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 4793ef5171aa..a684d999e605 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -177,6 +177,18 @@  &fec {
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	status = "okay";
+	phy-supply = <&reg_3p3v>;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {