diff mbox

[v6,10/32] target-arm: add non-secure Translation Block flag

Message ID 1412957023-11105-11-git-send-email-greg.bellows@linaro.org
State New
Headers show

Commit Message

Greg Bellows Oct. 10, 2014, 4:03 p.m. UTC
From: Sergey Fedorov <s.fedorov@samsung.com>

This patch is based on idea found in patch at
git://github.com/jowinter/qemu-trustzone.git
f3d955c6c0ed8c46bc0eb10b634201032a651dd2 by
Johannes Winter <johannes.winter@iaik.tugraz.at>.

The TBFLAG captures the SCR NS secure state at the time when a TB is created so
the correct bank is accessed on system register accesses.  It also allows to
generate different TCG code depending on CPU secure state.

Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
diff mbox

Patch

==========

v5 -> v6
- Removed 64-bit NS TBFLAG macros as they are not needed
- Added comment on DisasContext ns field
- Replaced use of USE_SECURE_REG with use_secure_reg

v4 -> v5
- Merge changes
- Fixed issue where TB secure state flag was incorrectly being set based on
  secure state rather than NS setting.  This caused an issue where monitor mode
  MRC/MCR accesses were always secure rather than being based on NS bit
  setting.
- Added separate 64/32 TB secure state flags
- Unconditionalized the setting of the DC ns bit
- Removed IS_NS macro and replaced with direct usage.
---
 target-arm/cpu.h       | 7 +++++++
 target-arm/translate.c | 1 +
 target-arm/translate.h | 1 +
 3 files changed, 9 insertions(+)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 9f1613f..59414f3 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -1546,6 +1546,8 @@  static inline bool arm_singlestep_active(CPUARMState *env)
  */
 #define ARM_TBFLAG_XSCALE_CPAR_SHIFT 20
 #define ARM_TBFLAG_XSCALE_CPAR_MASK (3 << ARM_TBFLAG_XSCALE_CPAR_SHIFT)
+#define ARM_TBFLAG_NS_SHIFT         22
+#define ARM_TBFLAG_NS_MASK          (1 << ARM_TBFLAG_NS_SHIFT)
 
 /* Bit usage when in AArch64 state */
 #define ARM_TBFLAG_AA64_EL_SHIFT    0
@@ -1590,6 +1592,8 @@  static inline bool arm_singlestep_active(CPUARMState *env)
     (((F) & ARM_TBFLAG_AA64_SS_ACTIVE_MASK) >> ARM_TBFLAG_AA64_SS_ACTIVE_SHIFT)
 #define ARM_TBFLAG_AA64_PSTATE_SS(F) \
     (((F) & ARM_TBFLAG_AA64_PSTATE_SS_MASK) >> ARM_TBFLAG_AA64_PSTATE_SS_SHIFT)
+#define ARM_TBFLAG_NS(F) \
+    (((F) & ARM_TBFLAG_NS_MASK) >> ARM_TBFLAG_NS_SHIFT)
 
 static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
                                         target_ulong *cs_base, int *flags)
@@ -1639,6 +1643,9 @@  static inline void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc,
         if (privmode) {
             *flags |= ARM_TBFLAG_PRIV_MASK;
         }
+        if (!(use_secure_reg(env))) {
+            *flags |= ARM_TBFLAG_NS_MASK;
+        }
         if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)
             || arm_el_is_aa64(env, 1)) {
             *flags |= ARM_TBFLAG_VFPEN_MASK;
diff --git a/target-arm/translate.c b/target-arm/translate.c
index 60655e1..6217dbb 100644
--- a/target-arm/translate.c
+++ b/target-arm/translate.c
@@ -10958,6 +10958,7 @@  static inline void gen_intermediate_code_internal(ARMCPU *cpu,
 #if !defined(CONFIG_USER_ONLY)
     dc->user = (ARM_TBFLAG_PRIV(tb->flags) == 0);
 #endif
+    dc->ns = ARM_TBFLAG_NS(tb->flags);
     dc->cpacr_fpen = ARM_TBFLAG_CPACR_FPEN(tb->flags);
     dc->vfp_enabled = ARM_TBFLAG_VFPEN(tb->flags);
     dc->vec_len = ARM_TBFLAG_VECLEN(tb->flags);
diff --git a/target-arm/translate.h b/target-arm/translate.h
index 2af8f99..519bcc1 100644
--- a/target-arm/translate.h
+++ b/target-arm/translate.h
@@ -20,6 +20,7 @@  typedef struct DisasContext {
 #if !defined(CONFIG_USER_ONLY)
     int user;
 #endif
+    bool ns;        /* Use non-secure CPREG bank on access */
     bool cpacr_fpen; /* FP enabled via CPACR.FPEN */
     bool vfp_enabled; /* FP enabled via FPSCR.EN */
     int vec_len;