diff mbox

[v6,13/32] target-arm: insert AArch32 cpregs twice into hashtable

Message ID 1412957023-11105-14-git-send-email-greg.bellows@linaro.org
State New
Headers show

Commit Message

Greg Bellows Oct. 10, 2014, 4:03 p.m. UTC
From: Fabian Aggeler <aggelerf@ethz.ch>

Prepare for cp register banking by inserting every cp register twice,
once for secure world and once for non-secure world.

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
diff mbox

Patch

==========

v5 -> v6
- Fixed NS-bit number in the CPREG hash lookup from 27 to 29.
- Switched to dedicated CPREG secure flags.
- Fixed disablement of reset and migration of common 32/64-bit registers.
- Globally replace Aarch# with AArch#

v4 -> v5
- Added use of ARM CP secure/non-secure bank flags during register processing
  in define_one_arm_cp_reg_with_opaque().  We now only register the specified
  bank if only one flag is specified, otherwise we register both a secure and
  non-secure instance.
---
 target-arm/helper.c | 90 ++++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 75 insertions(+), 15 deletions(-)

diff --git a/target-arm/helper.c b/target-arm/helper.c
index dfdf9d2..f709b4a 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3296,22 +3296,60 @@  static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
     uint32_t *key = g_new(uint32_t, 1);
     ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo));
     int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0;
-    if (r->state == ARM_CP_STATE_BOTH && state == ARM_CP_STATE_AA32) {
-        /* The AArch32 view of a shared register sees the lower 32 bits
-         * of a 64 bit backing field. It is not migratable as the AArch64
-         * view handles that. AArch64 also handles reset.
-         * We assume it is a cp15 register if the .cp field is left unset.
-         */
-        if (r2->cp == 0) {
-            r2->cp = 15;
+
+    if (state == ARM_CP_STATE_AA32) {
+        /* Clear the secure state flags and set based on incoming nsbit */
+        r2->secure &= ~(ARM_CP_SECSTATE_S | ARM_CP_SECSTATE_NS);
+        r2->secure |= ARM_CP_SECSTATE_S << nsbit;
+
+        if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) {
+            /* Register is banked (using both entries in array).
+             * Overwriting fieldoffset as the array was only used to define
+             * banked registers but later only fieldoffset is used.
+             */
+            r2->fieldoffset = r->bank_fieldoffsets[nsbit];
+
+            /* If V8 is enabled then we don't need to migrate or reset the
+             * AArch32 version of the banked registers as this will be handled
+             * through the AArch64 view.
+             * If v7 then we don't need to migrate or reset the AArch32
+             * non-secure bank as this will be handled through the AArch64
+             * view.  In this case the secure bank is not mirrored, so we must
+             * preserve it's reset criteria and allow it to be migrated.
+             *
+             * The exception to the above is cpregs with a crn of 13
+             * (specifically FCSEIDR and CONTEXTIDR) in which case there may
+             * not be an AArch64 equivalent for one or either bank so migration
+             * and reset must be preserved.
+             */
+            if (r->state == ARM_CP_STATE_BOTH) {
+                if ((arm_feature(&cpu->env, ARM_FEATURE_V8) && r->crn != 13) ||
+                    nsbit) {
+                    r2->type |= ARM_CP_NO_MIGRATE;
+                    r2->resetfn = arm_cp_reset_ignore;
+                }
+            }
+        } else if (!nsbit) {
+            /* The register is not banked so we only want to allow migration of
+             * the non-secure instance.
+             */
+            r2->type |= ARM_CP_NO_MIGRATE;
+            r2->resetfn = arm_cp_reset_ignore;
         }
-        r2->type |= ARM_CP_NO_MIGRATE;
-        r2->resetfn = arm_cp_reset_ignore;
+
+        if (r->state == ARM_CP_STATE_BOTH) {
+            /* We assume it is a cp15 register if the .cp field is left unset.
+             */
+            if (r2->cp == 0) {
+                r2->cp = 15;
+            }
+
 #ifdef HOST_WORDS_BIGENDIAN
-        if (r2->fieldoffset) {
-            r2->fieldoffset += sizeof(uint32_t);
-        }
+            if (r2->fieldoffset) {
+                r2->fieldoffset += sizeof(uint32_t);
+            }
 #endif
+        }
     }
     if (state == ARM_CP_STATE_AA64) {
         /* To allow abbreviation of ARMCPRegInfo
@@ -3476,8 +3514,30 @@  void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
                     if (r->state != state && r->state != ARM_CP_STATE_BOTH) {
                         continue;
                     }
-                    add_cpreg_to_hashtable(cpu, r, opaque, state,
-                                           crm, opc1, opc2, SCR_NS);
+                    if (state == ARM_CP_STATE_AA32) {
+                        /* Under AArch32 CP registers can be common
+                         * (same for secure and non-secure world) or banked.
+                         */
+                        uint32_t s =
+                          r->secure & (ARM_CP_SECSTATE_S | ARM_CP_SECSTATE_NS);
+                        if (ARM_CP_SECSTATE_S == s) {
+                            add_cpreg_to_hashtable(cpu, r, opaque, state,
+                                    crm, opc1, opc2, !SCR_NS);
+                        } else if (ARM_CP_SECSTATE_NS == s) {
+                            add_cpreg_to_hashtable(cpu, r, opaque, state,
+                                    crm, opc1, opc2, SCR_NS);
+                        } else {
+                            add_cpreg_to_hashtable(cpu, r, opaque, state,
+                                    crm, opc1, opc2, !SCR_NS);
+                            add_cpreg_to_hashtable(cpu, r, opaque, state,
+                                    crm, opc1, opc2, SCR_NS);
+                        }
+                    } else {
+                        /* AArch64 registers get mapped to non-secure instance
+                         * of AArch32 */
+                        add_cpreg_to_hashtable(cpu, r, opaque, state,
+                                crm, opc1, opc2, SCR_NS);
+                    }
                 }
             }
         }