diff mbox series

[v2,net-next] net: phy: icplus: call phy_restore_page() when phy_select_page() fails

Message ID YC+OpFGsDPXPnXM5@mwanda
State New
Headers show
Series [v2,net-next] net: phy: icplus: call phy_restore_page() when phy_select_page() fails | expand

Commit Message

Dan Carpenter Feb. 19, 2021, 10:10 a.m. UTC
The comments to phy_select_page() say that "phy_restore_page() must
always be called after this, irrespective of success or failure of this
call."  If we don't call phy_restore_page() then we are still holding
the phy_lock_mdio_bus() so it eventually leads to a dead lock.

Fixes: 32ab60e53920 ("net: phy: icplus: add MDI/MDIX support for IP101A/G")
Fixes: f9bc51e6cce2 ("net: phy: icplus: fix paged register access")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
v2: fix a couple other instances I missed in v1

 drivers/net/phy/icplus.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Dan Carpenter Feb. 19, 2021, 11:09 a.m. UTC | #1
On Fri, Feb 19, 2021 at 11:46:23AM +0100, Michael Walle wrote:
> Am 2021-02-19 11:10, schrieb Dan Carpenter:
> > The comments to phy_select_page() say that "phy_restore_page() must
> > always be called after this, irrespective of success or failure of this
> > call."  If we don't call phy_restore_page() then we are still holding
> > the phy_lock_mdio_bus() so it eventually leads to a dead lock.
> > 
> > Fixes: 32ab60e53920 ("net: phy: icplus: add MDI/MDIX support for
> > IP101A/G")
> > Fixes: f9bc51e6cce2 ("net: phy: icplus: fix paged register access")
> > Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
> 
> Reviewed-by: Michael Walle <michael@walle.cc>
> 
> I assume, this has to go through "net" if the merge window is closed, no?

It applies to net-next and not to net.  I expect that all of net-next
will be merged into net soon enough, but as of a couple hours ago it
only applied to net-next.

regards,
dan carpenter
patchwork-bot+netdevbpf@kernel.org Feb. 23, 2021, 3 a.m. UTC | #2
Hello:

This patch was applied to netdev/net.git (refs/heads/master):

On Fri, 19 Feb 2021 13:10:44 +0300 you wrote:
> The comments to phy_select_page() say that "phy_restore_page() must

> always be called after this, irrespective of success or failure of this

> call."  If we don't call phy_restore_page() then we are still holding

> the phy_lock_mdio_bus() so it eventually leads to a dead lock.

> 

> Fixes: 32ab60e53920 ("net: phy: icplus: add MDI/MDIX support for IP101A/G")

> Fixes: f9bc51e6cce2 ("net: phy: icplus: fix paged register access")

> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

> 

> [...]


Here is the summary with links:
  - [v2,net-next] net: phy: icplus: call phy_restore_page() when phy_select_page() fails
    https://git.kernel.org/netdev/net/c/4e9d9d1f4880

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/net/phy/icplus.c b/drivers/net/phy/icplus.c
index 3e431737c1ba..a00a667454a9 100644
--- a/drivers/net/phy/icplus.c
+++ b/drivers/net/phy/icplus.c
@@ -239,7 +239,7 @@  static int ip101a_g_config_intr_pin(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	/* configure the RXER/INTR_32 pin of the 32-pin IP101GR if needed: */
 	switch (priv->sel_intr32) {
@@ -314,7 +314,7 @@  static int ip101a_g_read_status(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	ret = __phy_read(phydev, IP10XX_SPEC_CTRL_STATUS);
 	if (ret < 0)
@@ -349,7 +349,8 @@  static int ip101a_g_read_status(struct phy_device *phydev)
 static int ip101a_g_config_mdix(struct phy_device *phydev)
 {
 	u16 ctrl = 0, ctrl2 = 0;
-	int oldpage, ret;
+	int oldpage;
+	int ret = 0;
 
 	switch (phydev->mdix_ctrl) {
 	case ETH_TP_MDI:
@@ -367,7 +368,7 @@  static int ip101a_g_config_mdix(struct phy_device *phydev)
 
 	oldpage = phy_select_page(phydev, IP101G_DEFAULT_PAGE);
 	if (oldpage < 0)
-		return oldpage;
+		goto out;
 
 	ret = __phy_modify(phydev, IP10XX_SPEC_CTRL_STATUS,
 			   IP101A_G_AUTO_MDIX_DIS, ctrl);