diff mbox series

[v5,07/22] media: camss: Add support for VFE hardware version Titan 170

Message ID 20210217112122.424236-8-robert.foss@linaro.org
State Superseded
Headers show
Series Add support for the SDM845 Camera Subsystem | expand

Commit Message

Robert Foss Feb. 17, 2021, 11:21 a.m. UTC 
Add register definitions for version 170 of the Titan architecture
and implement support for the RDI output mode.

The RDI mode as opposed to the PIX output mode for the VFE unit does
not support any ISP functionality. This means essentially only
supporting dumping the output of the whatever the CSI decoder receives
from the sensor.

For example will a sensor outputting YUV pixel format frames, only
allow the VFE to dump those frames as they are received by the ISP
to memory through the RDI interface.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---


Changes since v1:
 - Andrey: Remove commented out chunk
 - Remove left over WIP comments

Changes since v4:
 - Andrey: Remove traces of PIX support
 - Andrey: Fix vfe_global_reset() overwriting reset command
 - Remove unused variable



 drivers/media/platform/qcom/camss/Makefile    |   1 +
 .../media/platform/qcom/camss/camss-vfe-170.c | 790 ++++++++++++++++++
 drivers/media/platform/qcom/camss/camss-vfe.c |  47 +-
 drivers/media/platform/qcom/camss/camss-vfe.h |  26 +-
 .../media/platform/qcom/camss/camss-video.c   |  52 ++
 drivers/media/platform/qcom/camss/camss.c     |  61 ++
 6 files changed, 957 insertions(+), 20 deletions(-)
 create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c

Comments

Andrey Konovalov Feb. 20, 2021, 9:40 p.m. UTC | #1 
Hi Robert,

Thank you for your patch!

On 17.02.2021 14:21, Robert Foss wrote:
> Add register definitions for version 170 of the Titan architecture
> and implement support for the RDI output mode.
> 
> The RDI mode as opposed to the PIX output mode for the VFE unit does
> not support any ISP functionality. This means essentially only
> supporting dumping the output of the whatever the CSI decoder receives
> from the sensor.
> 
> For example will a sensor outputting YUV pixel format frames, only
> allow the VFE to dump those frames as they are received by the ISP
> to memory through the RDI interface.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
> 
> 
> Changes since v1:
>   - Andrey: Remove commented out chunk
>   - Remove left over WIP comments
> 
> Changes since v4:
>   - Andrey: Remove traces of PIX support
>   - Andrey: Fix vfe_global_reset() overwriting reset command
>   - Remove unused variable
> 
> 
> 
>   drivers/media/platform/qcom/camss/Makefile    |   1 +
>   .../media/platform/qcom/camss/camss-vfe-170.c | 790 ++++++++++++++++++
>   drivers/media/platform/qcom/camss/camss-vfe.c |  47 +-
>   drivers/media/platform/qcom/camss/camss-vfe.h |  26 +-
>   .../media/platform/qcom/camss/camss-video.c   |  52 ++
>   drivers/media/platform/qcom/camss/camss.c     |  61 ++
>   6 files changed, 957 insertions(+), 20 deletions(-)
>   create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c
> 
> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
> index 940c0ae3e003..052c4f405fa3 100644
> --- a/drivers/media/platform/qcom/camss/Makefile
> +++ b/drivers/media/platform/qcom/camss/Makefile
> @@ -11,6 +11,7 @@ qcom-camss-objs += \
>   		camss-vfe-4-1.o \
>   		camss-vfe-4-7.o \
>   		camss-vfe-4-8.o \
> +		camss-vfe-170.o \
>   		camss-vfe-gen1.o \
>   		camss-vfe.o \
>   		camss-video.o \
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
> new file mode 100644
> index 000000000000..c4991b1f22f8
> --- /dev/null
> +++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
> @@ -0,0 +1,790 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * camss-vfe-4-7.c
> + *
> + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7
> + *
> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> + * Copyright (C) 2015-2018 Linaro Ltd.

- it looks like the header comes from v4.7 without updating to Titan 170

> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +
> +#include "camss.h"
> +#include "camss-vfe.h"
> +
> +#define VFE_HW_VERSION				(0x000)
> +
> +#define VFE_GLOBAL_RESET_CMD			(0x018)
> +#define		GLOBAL_RESET_CMD_CORE		BIT(0)
> +#define		GLOBAL_RESET_CMD_CAMIF		BIT(1)
> +#define		GLOBAL_RESET_CMD_BUS		BIT(2)
> +#define		GLOBAL_RESET_CMD_BUS_BDG	BIT(3)
> +#define		GLOBAL_RESET_CMD_REGISTER	BIT(4)
> +#define		GLOBAL_RESET_CMD_PM		BIT(5)
> +#define		GLOBAL_RESET_CMD_BUS_MISR	BIT(6)
> +#define		GLOBAL_RESET_CMD_TESTGEN	BIT(7)
> +#define		GLOBAL_RESET_CMD_DSP		BIT(8)
> +#define		GLOBAL_RESET_CMD_IDLE_CGC	BIT(9)
> +#define		GLOBAL_RESET_CMD_RDI0		BIT(10)
> +#define		GLOBAL_RESET_CMD_RDI1		BIT(11)
> +#define		GLOBAL_RESET_CMD_RDI2		BIT(12)
> +#define		GLOBAL_RESET_CMD_RDI3		BIT(13)
> +#define		GLOBAL_RESET_CMD_VFE_DOMAIN	BIT(30)
> +#define		GLOBAL_RESET_CMD_RESET_BYPASS	BIT(31)
> +
> +
> +#define VFE_CORE_CFG				(0x050)
> +#define		CFG_PIXEL_PATTERN_YCBYCR	(0x4)
> +#define		CFG_PIXEL_PATTERN_YCRYCB	(0x5)
> +#define		CFG_PIXEL_PATTERN_CBYCRY	(0x6)
> +#define		CFG_PIXEL_PATTERN_CRYCBY	(0x7)
> +#define		CFG_COMPOSITE_REG_UPDATE_EN	BIT(4)
> +
> +#define VFE_IRQ_CMD				(0x058)
> +#define		CMD_GLOBAL_CLEAR		BIT(0)
> +
> +#define VFE_IRQ_MASK_0					(0x05c)
> +#define		MASK_0_CAMIF_SOF			BIT(0)
> +#define		MASK_0_CAMIF_EOF			BIT(1)
> +#define		MASK_0_RDI_REG_UPDATE(n)		BIT((n) + 5)
> +#define		MASK_0_IMAGE_MASTER_n_PING_PONG(n)	BIT((n) + 8)
> +#define		MASK_0_IMAGE_COMPOSITE_DONE_n(n)	BIT((n) + 25)
> +#define		MASK_0_RESET_ACK			BIT(31)
> +
> +#define VFE_IRQ_MASK_1					(0x060)
> +#define		MASK_1_CAMIF_ERROR			BIT(0)
> +#define		MASK_1_VIOLATION			BIT(7)
> +#define		MASK_1_BUS_BDG_HALT_ACK			BIT(8)
> +#define		MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n)	BIT((n) + 9)
> +#define		MASK_1_RDI_SOF(n)			BIT((n) + 29)
> +
> +#define VFE_IRQ_CLEAR_0					(0x064)
> +#define VFE_IRQ_CLEAR_1					(0x068)
> +
> +#define VFE_IRQ_STATUS_0				(0x06c)
> +#define		STATUS_0_CAMIF_SOF			BIT(0)
> +#define		STATUS_0_RDI_REG_UPDATE(n)		BIT((n) + 5)
> +#define		STATUS_0_IMAGE_MASTER_PING_PONG(n)	BIT((n) + 8)
> +#define		STATUS_0_IMAGE_COMPOSITE_DONE(n)	BIT((n) + 25)
> +#define		STATUS_0_RESET_ACK			BIT(31)
> +
> +#define VFE_IRQ_STATUS_1				(0x070)
> +#define		STATUS_1_VIOLATION			BIT(7)
> +#define		STATUS_1_BUS_BDG_HALT_ACK		BIT(8)
> +#define		STATUS_1_RDI_SOF(n)			BIT((n) + 27)
> +
> +#define VFE_VIOLATION_STATUS			(0x07c)
> +
> +#define VFE_CAMIF_CMD				(0x478)
> +#define		CMD_CLEAR_CAMIF_STATUS		BIT(2)
> +
> +#define VFE_CAMIF_CFG				(0x47c)
> +#define		CFG_VSYNC_SYNC_EDGE		(0)
> +#define			VSYNC_ACTIVE_HIGH	(0)
> +#define			VSYNC_ACTIVE_LOW	(1)
> +#define		CFG_HSYNC_SYNC_EDGE		(1)
> +#define			HSYNC_ACTIVE_HIGH	(0)
> +#define			HSYNC_ACTIVE_LOW	(1)
> +#define		CFG_VFE_SUBSAMPLE_ENABLE	BIT(4)
> +#define		CFG_BUS_SUBSAMPLE_ENABLE	BIT(5)
> +#define		CFG_VFE_OUTPUT_EN		BIT(6)
> +#define		CFG_BUS_OUTPUT_EN		BIT(7)
> +#define		CFG_BINNING_EN			BIT(9)
> +#define		CFG_FRAME_BASED_EN		BIT(10)
> +#define		CFG_RAW_CROP_EN			BIT(22)
> +
> +// XXX different, don't exist in TITAN register docs
> +#define VFE_0_CAMIF_FRAME_CFG			0x484
> +#define VFE_0_CAMIF_WINDOW_WIDTH_CFG		0x488
> +#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG		0x48c
> +#define VFE_0_CAMIF_SUBSAMPLE_CFG		0x490
> +#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN	0x498
> +#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN	0x49c
> +#define VFE_0_CAMIF_STATUS			0x4a4
> +#define VFE_0_CAMIF_STATUS_HALT			BIT(31)
> +#define CAMIF_TIMEOUT_SLEEP_US 1000
> +#define CAMIF_TIMEOUT_ALL_US 1000000
> +
> +#define VFE_REG_UPDATE_CMD			(0x4ac)
> +#define		REG_UPDATE_RDI(n)		BIT(1 + (n))
> +
> +
> +#define VFE_BUS_IRQ_MASK(n)		(0x2044 + (n) * 4)
> +#define VFE_BUS_IRQ_CLEAR(n)		(0x2050 + (n) * 4)
> +
> +#define VFE_BUS_IRQ_STATUS(n)		(0x205c + (n) * 4)
> +#define		STATUS0_COMP_RESET_DONE		BIT(0)
> +#define		STATUS0_COMP_REG_UPDATE0_DONE	BIT(1)
> +#define		STATUS0_COMP_REG_UPDATE1_DONE	BIT(2)
> +#define		STATUS0_COMP_REG_UPDATE2_DONE	BIT(3)
> +#define		STATUS0_COMP_REG_UPDATE3_DONE	BIT(4)
> +#define		STATUS0_COMP_REG_UPDATE_DONE(n)	BIT(n + 1)
> +#define		STATUS0_COMP0_BUF_DONE		BIT(5)
> +#define		STATUS0_COMP1_BUF_DONE		BIT(6)
> +#define		STATUS0_COMP2_BUF_DONE		BIT(7)
> +#define		STATUS0_COMP3_BUF_DONE		BIT(8)
> +#define		STATUS0_COMP4_BUF_DONE		BIT(9)
> +#define		STATUS0_COMP5_BUF_DONE		BIT(10)
> +#define		STATUS0_COMP_BUF_DONE(n)	BIT(n + 5)
> +#define		STATUS0_COMP_ERROR		BIT(11)
> +#define		STATUS0_COMP_OVERWRITE		BIT(12)
> +#define		STATUS0_OVERFLOW		BIT(13)
> +#define		STATUS0_VIOLATION		BIT(14)
> +/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */
> +#define		STATUS1_WM_CLIENT_BUF_DONE(n)		BIT(n)
> +#define		STATUS1_EARLY_DONE			BIT(24)
> +#define		STATUS2_DUAL_COMP0_BUF_DONE		BIT(0)
> +#define		STATUS2_DUAL_COMP1_BUF_DONE		BIT(1)
> +#define		STATUS2_DUAL_COMP2_BUF_DONE		BIT(2)
> +#define		STATUS2_DUAL_COMP3_BUF_DONE		BIT(3)
> +#define		STATUS2_DUAL_COMP4_BUF_DONE		BIT(4)
> +#define		STATUS2_DUAL_COMP5_BUF_DONE		BIT(5)
> +#define		STATUS2_DUAL_COMP_BUF_DONE(n)		BIT(n)
> +#define		STATUS2_DUAL_COMP_ERROR			BIT(6)
> +#define		STATUS2_DUAL_COMP_OVERWRITE		BIT(7)
> +
> +#define VFE_BUS_IRQ_CLEAR_GLOBAL		(0x2068)
> +
> +#define VFE_BUS_WM_DEBUG_STATUS_CFG		(0x226c)
> +#define		DEBUG_STATUS_CFG_STATUS0(n)	BIT(n)
> +#define		DEBUG_STATUS_CFG_STATUS1(n)	BIT(8+n)
> +
> +#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER	(0x2080)
> +
> +#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC		(0x2084)
> +#define		BUS_VER2_MAX_CLIENTS (24)
> +#define		WM_ADDR_NO_SYNC_DEFAULT_VAL \
> +				((1 << BUS_VER2_MAX_CLIENTS) - 1)
> +
> +#define VFE_BUS_WM_CGC_OVERRIDE			(0x200c)
> +#define		WM_CGC_OVERRIDE_ALL		(0xFFFFF)
> +
> +#define VFE_BUS_WM_TEST_BUS_CTRL		(0x211c)
> +
> +#define VFE_BUS_WM_STATUS0(n)			(0x2200 + (n) * 0x100)
> +#define VFE_BUS_WM_STATUS1(n)			(0x2204 + (n) * 0x100)
> +#define VFE_BUS_WM_CFG(n)			(0x2208 + (n) * 0x100)
> +#define		WM_CFG_EN			(0)
> +#define		WM_CFG_MODE			(1)
> +#define			MODE_QCOM_PLAIN	(0)
> +#define			MODE_MIPI_RAW	(1)
> +#define		WM_CFG_VIRTUALFRAME		(2)
> +#define VFE_BUS_WM_HEADER_ADDR(n)		(0x220c + (n) * 0x100)
> +#define VFE_BUS_WM_HEADER_CFG(n)		(0x2210 + (n) * 0x100)
> +#define VFE_BUS_WM_IMAGE_ADDR(n)		(0x2214 + (n) * 0x100)
> +#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n)		(0x2218 + (n) * 0x100)
> +#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n)		(0x221c + (n) * 0x100)
> +#define		WM_BUFFER_DEFAULT_WIDTH		(0xFF01)
> +
> +#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n)		(0x2220 + (n) * 0x100)
> +#define VFE_BUS_WM_PACKER_CFG(n)		(0x2224 + (n) * 0x100)
> +
> +#define VFE_BUS_WM_STRIDE(n)			(0x2228 + (n) * 0x100)
> +#define		WM_STRIDE_DEFAULT_STRIDE	(0xFF01)
> +
> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)	(0x2248 + (n) * 0x100)
> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)	(0x224c + (n) * 0x100)
> +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)		(0x2250 + (n) * 0x100)
> +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)		(0x2254 + (n) * 0x100)
> +#define VFE_BUS_WM_FRAME_INC(n)			(0x2258 + (n) * 0x100)
> +#define VFE_BUS_WM_BURST_LIMIT(n)		(0x225c + (n) * 0x100)
> +
> +
> +static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
> +{
> +	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
> +
> +	u32 gen = (hw_version >> 28) & 0xF;
> +	u32 rev = (hw_version >> 16) & 0xFFF;
> +	u32 step = hw_version & 0xFFFF;
> +
> +	dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
> +}
> +
> +static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
> +{
> +	u32 bits = readl_relaxed(vfe->base + reg);
> +
> +	writel_relaxed(bits & ~clr_bits, vfe->base + reg);
> +}
> +
> +static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
> +{
> +	u32 bits = readl_relaxed(vfe->base + reg);
> +
> +	writel_relaxed(bits | set_bits, vfe->base + reg);
> +}
> +
> +static void vfe_global_reset(struct vfe_device *vfe)
> +{
> +	u32 reset_bits = GLOBAL_RESET_CMD_CORE		|
> +			 GLOBAL_RESET_CMD_CAMIF		|
> +			 GLOBAL_RESET_CMD_BUS		|
> +			 GLOBAL_RESET_CMD_REGISTER	|
> +			 GLOBAL_RESET_CMD_PM		|
> +			 GLOBAL_RESET_CMD_BUS_MISR	|
> +			 GLOBAL_RESET_CMD_IDLE_CGC	|
> +			 GLOBAL_RESET_CMD_RDI0		|
> +			 GLOBAL_RESET_CMD_RDI1		|
> +			 GLOBAL_RESET_CMD_RDI2;

- so the reset_bits is set to 0x00001E77 in v5.

In v4 the reset_bits was set to 0x00003F9F which corresponds to:

	GLOBAL_RESET_CMD_CORE		|
	GLOBAL_RESET_CMD_CAMIF		|
	GLOBAL_RESET_CMD_BUS		|
	GLOBAL_RESET_CMD_BUS_BDG	|
	GLOBAL_RESET_CMD_REGISTER	|
	GLOBAL_RESET_CMD_TESTGEN	|
	GLOBAL_RESET_CMD_DSP		|
	GLOBAL_RESET_CMD_IDLE_CGC	|
	GLOBAL_RESET_CMD_RDI0		|
	GLOBAL_RESET_CMD_RDI1		|
	GLOBAL_RESET_CMD_RDI2		|
	GLOBAL_RESET_CMD_RDI3;

So the difference between v4 and v5 is:

reset in v4, not reset in v5:
	GLOBAL_RESET_CMD_BUS_BDG
	GLOBAL_RESET_CMD_TESTGEN
	GLOBAL_RESET_CMD_DSP

reset in v5, not reset in v4:
	GLOBAL_RESET_CMD_PM
	GLOBAL_RESET_CMD_BUS_MISR

- correct?

   It is probably worth a few words in the v4 vs v5 changelog.

   (dropping GLOBAL_RESET_CMD_RDI3 in v5 is clear - Titan 170 has only RDI0 to RDI2
   according to the driver code)

> +
> +	writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);
> +
> +	/* Make sure IRQ mask has been written before resetting */
> +	wmb();
> +
> +	writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);
> +}
> +
> +static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
> +{
> +	u32 val;
> +
> +	/*Set Debug Registers*/
> +	val = DEBUG_STATUS_CFG_STATUS0(1) |
> +	      DEBUG_STATUS_CFG_STATUS0(7);
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);
> +
> +	/* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */
> +	writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);
> +
> +	/* no clock gating at bus input */
> +	val = WM_CGC_OVERRIDE_ALL;
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
> +
> +	writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
> +
> +	/* if addr_no_sync has default value then config the addr no sync reg */
> +	val = WM_ADDR_NO_SYNC_DEFAULT_VAL;
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);
> +
> +	writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
> +
> +	val = WM_BUFFER_DEFAULT_WIDTH;
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));
> +
> +	val = 0;
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));
> +
> +	val = 0;
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
> +
> +	/* Configure stride for RDIs */
> +	//val = pix->plane_fmt[0].bytesperline;
> +	val = WM_STRIDE_DEFAULT_STRIDE;
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
> +
> +	/* Enable WM */
> +	val = 1 << WM_CFG_EN |
> +	      MODE_MIPI_RAW << WM_CFG_MODE;
> +	writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));
> +}
> +
> +static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
> +{
> +	/* Disable WM */
> +	writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
> +}
> +
> +static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
> +			  struct vfe_line *line)
> +{
> +	struct v4l2_pix_format_mplane *pix =
> +		&line->video_out.active_fmt.fmt.pix_mp;
> +	u32 stride = pix->plane_fmt[0].bytesperline;
> +
> +	writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
> +	writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));
> +}
> +
> +static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
> +{
> +	vfe->reg_update |= REG_UPDATE_RDI(line_id);
> +
> +	/* Enforce ordering between previous reg writes and reg update */
> +	wmb();
> +
> +	writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
> +
> +	/* Enforce ordering between reg update and subsequent reg writes */
> +	wmb();
> +}
> +
> +static inline void vfe_reg_update_clear(struct vfe_device *vfe,
> +					enum vfe_line_id line_id)
> +{
> +	vfe->reg_update &= ~REG_UPDATE_RDI(line_id);
> +}
> +
> +static void vfe_enable_irq_common(struct vfe_device *vfe)
> +{
> +	vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
> +	vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
> +
> +	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
> +	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
> +	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));

Looking at the #defines in the beginning of this file, only part
of the IRQ sources (not the whole 32 per each register) are used
or defined.

Is it safe to unmask the unused (reserved?) bits in the above 5
IRQ mask registers?

> +}
> +
> +static void vfe_isr_halt_ack(struct vfe_device *vfe)
> +{
> +	complete(&vfe->halt_complete);
> +}
> +
> +static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
> +{
> +	*status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
> +	*status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
> +
> +	writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
> +	writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
> +
> +	/* Enforce ordering between IRQ Clear and Global IRQ Clear */
> +	wmb();
> +	writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
> +}
> +
> +static void vfe_violation_read(struct vfe_device *vfe)
> +{
> +	u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
> +
> +	pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
> +}
> +
> +/*
> + * vfe_isr - VFE module interrupt handler
> + * @irq: Interrupt line
> + * @dev: VFE device
> + *
> + * Return IRQ_HANDLED on success
> + */
> +static irqreturn_t vfe_isr(int irq, void *dev)
> +{
> +	struct vfe_device *vfe = dev;
> +	u32 status0, status1, vfe_bus_status[3];
> +	int i, wm;
> +
> +	status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
> +	status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
> +
> +	writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);
> +	writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);
> +
> +	for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {
> +		vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));
> +		writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));
> +	}
> +
> +	/* Enforce ordering between IRQ reading and interpretation */
> +	wmb();
> +
> +	writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
> +	writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
> +
> +	if (status0 & STATUS_0_RESET_ACK)
> +		vfe->isr_ops.reset_ack(vfe);
> +
> +	for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
> +		if (status0 & STATUS_0_RDI_REG_UPDATE(i))
> +			vfe->isr_ops.reg_update(vfe, i);
> +
> +	for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
> +		if (status0 & STATUS_1_RDI_SOF(i))
> +			vfe->isr_ops.sof(vfe, i);
> +
> +	for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
> +		if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
> +			vfe->isr_ops.comp_done(vfe, i);
> +
> +	for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)
> +		if (status0 & BIT(9))
> +			if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))
> +				vfe->isr_ops.wm_done(vfe, wm);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/*
> + * vfe_halt - Trigger halt on VFE module and wait to complete
> + * @vfe: VFE device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int vfe_halt(struct vfe_device *vfe)
> +{
> +	unsigned long time;
> +
> +	return 0;
> +
> +	reinit_completion(&vfe->halt_complete);
> +
> +	time = wait_for_completion_timeout(&vfe->halt_complete,
> +		msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
> +	if (!time) {
> +		dev_err(vfe->camss->dev, "VFE halt timeout\n");
> +		return -EIO;
> +	}
> +
> +	return 0;
> +}
> +
> +static int vfe_get_output(struct vfe_line *line)
> +{
> +	struct vfe_device *vfe = to_vfe(line);
> +	struct vfe_output *output;
> +	unsigned long flags;
> +	int i;
> +	int wm_idx;
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +
> +	output = &line->output;
> +	if (output->state != VFE_OUTPUT_OFF) {
> +		dev_err(vfe->camss->dev, "Output is running\n");
> +		goto error;
> +	}
> +
> +	output->wm_num = 1;
> +
> +	for (i = 0; i < output->wm_num; i++) {

- this for loop can now be omitted ("for (i = 0; i < 1; i++)" is just one pass) ...

> +		wm_idx = vfe_reserve_wm(vfe, line->id);
> +		if (wm_idx < 0) {
> +			dev_err(vfe->camss->dev, "Can not reserve wm\n");
> +			goto error_get_wm;
> +		}
> +		output->wm_idx[i] = wm_idx;
> +	}
> +
> +	output->drop_update_idx = 0;
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	return 0;
> +
> +error_get_wm:
> +	for (i--; i >= 0; i--)

- ... and this one too. And the "i" local var is no longer needed.

Thanks,
Andrey

> +		vfe_release_wm(vfe, output->wm_idx[i]);
> +	output->state = VFE_OUTPUT_OFF;
> +error:
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	return -EINVAL;
> +}
> +
> +static int vfe_enable_output(struct vfe_line *line)
> +{
> +	struct vfe_device *vfe = to_vfe(line);
> +	struct vfe_output *output = &line->output;
> +	const struct vfe_hw_ops *ops = vfe->ops;
> +	struct media_entity *sensor;
> +	unsigned long flags;
> +	unsigned int frame_skip = 0;
> +	unsigned int i;
> +
> +	sensor = camss_find_sensor(&line->subdev.entity);
> +	if (sensor) {
> +		struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
> +
> +		v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
> +		/* Max frame skip is 29 frames */
> +		if (frame_skip > VFE_FRAME_DROP_VAL - 1)
> +			frame_skip = VFE_FRAME_DROP_VAL - 1;
> +	}
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +
> +	ops->reg_update_clear(vfe, line->id);
> +
> +	if (output->state != VFE_OUTPUT_OFF) {
> +		dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
> +			output->state);
> +		spin_unlock_irqrestore(&vfe->output_lock, flags);
> +		return -EINVAL;
> +	}
> +
> +	WARN_ON(output->gen2.active_num);
> +
> +	output->state = VFE_OUTPUT_ON;
> +
> +	output->sequence = 0;
> +	output->wait_reg_update = 0;
> +	reinit_completion(&output->reg_update);
> +
> +	vfe_wm_start(vfe, output->wm_idx[0], line);
> +
> +	for (i = 0; i < 2; i++) {
> +		output->buf[i] = vfe_buf_get_pending(output);
> +		if (!output->buf[i])
> +			break;
> +		output->gen2.active_num++;
> +		vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
> +	}
> +
> +	ops->reg_update(vfe, line->id);
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	return 0;
> +}
> +
> +static int vfe_disable_output(struct vfe_line *line)
> +{
> +	struct vfe_device *vfe = to_vfe(line);
> +	struct vfe_output *output = &line->output;
> +	unsigned long flags;
> +	unsigned int i;
> +	bool done;
> +	int timeout = 0;
> +
> +	do {
> +		spin_lock_irqsave(&vfe->output_lock, flags);
> +		done = !output->gen2.active_num;
> +		spin_unlock_irqrestore(&vfe->output_lock, flags);
> +		usleep_range(10000, 20000);
> +
> +		if (timeout++ == 100) {
> +			dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
> +			vfe_reset(vfe);
> +			output->gen2.active_num = 0;
> +			return 0;
> +		}
> +	} while (!done);
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +	for (i = 0; i < output->wm_num; i++)
> +		vfe_wm_stop(vfe, output->wm_idx[i]);
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	return 0;
> +}
> +
> +/*
> + * vfe_enable - Enable streaming on VFE line
> + * @line: VFE line
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int vfe_enable(struct vfe_line *line)
> +{
> +	struct vfe_device *vfe = to_vfe(line);
> +	int ret;
> +
> +	mutex_lock(&vfe->stream_lock);
> +
> +	if (!vfe->stream_count)
> +		vfe_enable_irq_common(vfe);
> +
> +	vfe->stream_count++;
> +
> +	mutex_unlock(&vfe->stream_lock);
> +
> +	ret = vfe_get_output(line);
> +	if (ret < 0)
> +		goto error_get_output;
> +
> +	ret = vfe_enable_output(line);
> +	if (ret < 0)
> +		goto error_enable_output;
> +
> +	vfe->was_streaming = 1;
> +
> +	return 0;
> +
> +
> +error_enable_output:
> +	vfe_put_output(line);
> +
> +error_get_output:
> +	mutex_lock(&vfe->stream_lock);
> +
> +	vfe->stream_count--;
> +
> +	mutex_unlock(&vfe->stream_lock);
> +
> +	return ret;
> +}
> +
> +/*
> + * vfe_disable - Disable streaming on VFE line
> + * @line: VFE line
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int vfe_disable(struct vfe_line *line)
> +{
> +	struct vfe_device *vfe = to_vfe(line);
> +
> +	vfe_disable_output(line);
> +
> +	vfe_put_output(line);
> +
> +	mutex_lock(&vfe->stream_lock);
> +
> +	vfe->stream_count--;
> +
> +	mutex_unlock(&vfe->stream_lock);
> +
> +	return 0;
> +}
> +
> +/*
> + * vfe_isr_sof - Process start of frame interrupt
> + * @vfe: VFE Device
> + * @line_id: VFE line
> + */
> +static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
> +{
> +
> +}
> +
> +/*
> + * vfe_isr_reg_update - Process reg update interrupt
> + * @vfe: VFE Device
> + * @line_id: VFE line
> + */
> +static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
> +{
> +	struct vfe_output *output;
> +	unsigned long flags;
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +	vfe->ops->reg_update_clear(vfe, line_id);
> +
> +	output = &vfe->line[line_id].output;
> +
> +	if (output->wait_reg_update) {
> +		output->wait_reg_update = 0;
> +		complete(&output->reg_update);
> +	}
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +}
> +
> +/*
> + * vfe_isr_wm_done - Process write master done interrupt
> + * @vfe: VFE Device
> + * @wm: Write master id
> + */
> +static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
> +{
> +	struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
> +	struct camss_buffer *ready_buf;
> +	struct vfe_output *output;
> +	unsigned long flags;
> +	u32 index;
> +	u64 ts = ktime_get_ns();
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +
> +	if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
> +		dev_err_ratelimited(vfe->camss->dev,
> +				    "Received wm done for unmapped index\n");
> +		goto out_unlock;
> +	}
> +	output = &vfe->line[vfe->wm_output_map[wm]].output;
> +
> +	ready_buf = output->buf[0];
> +	if (!ready_buf) {
> +		dev_err_ratelimited(vfe->camss->dev,
> +				    "Missing ready buf %d!\n", output->state);
> +		goto out_unlock;
> +	}
> +
> +	ready_buf->vb.vb2_buf.timestamp = ts;
> +	ready_buf->vb.sequence = output->sequence++;
> +
> +	index = 0;
> +	output->buf[0] = output->buf[1];
> +	if (output->buf[0])
> +		index = 1;
> +
> +	output->buf[index] = vfe_buf_get_pending(output);
> +
> +	if (output->buf[index])
> +		vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
> +	else
> +		output->gen2.active_num--;
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
> +
> +	return;
> +
> +out_unlock:
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +}
> +
> +/*
> + * vfe_queue_buffer - Add empty buffer
> + * @vid: Video device structure
> + * @buf: Buffer to be enqueued
> + *
> + * Add an empty buffer - depending on the current number of buffers it will be
> + * put in pending buffer queue or directly given to the hardware to be filled.
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +static int vfe_queue_buffer(struct camss_video *vid,
> +			    struct camss_buffer *buf)
> +{
> +	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
> +	struct vfe_device *vfe = to_vfe(line);
> +	struct vfe_output *output;
> +	unsigned long flags;
> +
> +	output = &line->output;
> +
> +	spin_lock_irqsave(&vfe->output_lock, flags);
> +
> +	if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
> +		output->buf[output->gen2.active_num++] = buf;
> +		vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
> +	} else {
> +		vfe_buf_add_pending(output, buf);
> +	}
> +
> +	spin_unlock_irqrestore(&vfe->output_lock, flags);
> +
> +	return 0;
> +}
> +
> +const struct vfe_isr_ops vfe_isr_ops_170 = {
> +	.reset_ack = vfe_isr_reset_ack,
> +	.halt_ack = vfe_isr_halt_ack,
> +	.reg_update = vfe_isr_reg_update,
> +	.sof = vfe_isr_sof,
> +	.comp_done = vfe_isr_comp_done,
> +	.wm_done = vfe_isr_wm_done,
> +};
> +
> +static const struct camss_video_ops vfe_video_ops_170 = {
> +	.queue_buffer = vfe_queue_buffer,
> +	.flush_buffers = vfe_flush_buffers,
> +};
> +
> +static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
> +{
> +	vfe->isr_ops = vfe_isr_ops_170;
> +	vfe->video_ops = vfe_video_ops_170;
> +
> +	vfe->line_num = VFE_LINE_NUM_GEN2;
> +}
> +
> +const struct vfe_hw_ops vfe_ops_170 = {
> +	.global_reset = vfe_global_reset,
> +	.hw_version_read = vfe_hw_version_read,
> +	.isr_read = vfe_isr_read,
> +	.isr = vfe_isr,
> +	.reg_update_clear = vfe_reg_update_clear,
> +	.reg_update = vfe_reg_update,
> +	.subdev_init = vfe_subdev_init,
> +	.vfe_disable = vfe_disable,
> +	.vfe_enable = vfe_enable,
> +	.vfe_halt = vfe_halt,
> +	.violation_read = vfe_violation_read,
> +};
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> index 375843bd16af..6fafeb8a5484 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> @@ -96,6 +96,32 @@ static const struct vfe_format formats_pix_8x96[] = {
>   	{ MEDIA_BUS_FMT_YVYU8_2X8, 8 },
>   };
>   
> +static const struct vfe_format formats_rdi_845[] = {
> +	{ MEDIA_BUS_FMT_UYVY8_2X8, 8 },
> +	{ MEDIA_BUS_FMT_VYUY8_2X8, 8 },
> +	{ MEDIA_BUS_FMT_YUYV8_2X8, 8 },
> +	{ MEDIA_BUS_FMT_YVYU8_2X8, 8 },
> +	{ MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
> +	{ MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
> +	{ MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
> +	{ MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
> +	{ MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
> +	{ MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
> +	{ MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
> +	{ MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
> +	{ MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },
> +	{ MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
> +	{ MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
> +	{ MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
> +	{ MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
> +	{ MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
> +	{ MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
> +	{ MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
> +	{ MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
> +	{ MEDIA_BUS_FMT_Y10_1X10, 10 },
> +	{ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
> +};
> +
>   /*
>    * vfe_get_bpp - map media bus format to bits per pixel
>    * @formats: supported media bus formats array
> @@ -192,7 +218,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>   			return sink_code;
>   		}
>   	else if (vfe->camss->version == CAMSS_8x96 ||
> -		 vfe->camss->version == CAMSS_660)
> +		 vfe->camss->version == CAMSS_660 ||
> +		 vfe->camss->version == CAMSS_845)
>   		switch (sink_code) {
>   		case MEDIA_BUS_FMT_YUYV8_2X8:
>   		{
> @@ -256,13 +283,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>   		return 0;
>   }
>   
> -/*
> - * vfe_reset - Trigger reset on VFE module and wait to complete
> - * @vfe: VFE device
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -static int vfe_reset(struct vfe_device *vfe)
> +int vfe_reset(struct vfe_device *vfe)
>   {
>   	unsigned long time;
>   
> @@ -429,7 +450,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
>   		struct camss_clock *clock = &vfe->clock[i];
>   
>   		if (!strcmp(clock->name, "vfe0") ||
> -		    !strcmp(clock->name, "vfe1")) {
> +		    !strcmp(clock->name, "vfe1") ||
> +		    !strcmp(clock->name, "vfe_lite")) {
>   			u64 min_rate = 0;
>   			long rate;
>   
> @@ -1268,6 +1290,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>   	case CAMSS_660:
>   		vfe->ops = &vfe_ops_4_8;
>   		break;
> +
> +	case CAMSS_845:
> +		vfe->ops = &vfe_ops_170;
> +		break;
>   	default:
>   		return -EINVAL;
>   	}
> @@ -1379,6 +1405,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>   				l->formats = formats_rdi_8x96;
>   				l->nformats = ARRAY_SIZE(formats_rdi_8x96);
>   			}
> +		} else if (camss->version == CAMSS_845) {
> +			l->formats = formats_rdi_845;
> +			l->nformats = ARRAY_SIZE(formats_rdi_845);
>   		} else {
>   			return -EINVAL;
>   		}
> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
> index aad5dc74c2c0..29b3d930ffc6 100644
> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
> @@ -19,7 +19,6 @@
>   #include "camss-video.h"
>   #include "camss-vfe-gen1.h"
>   
> -
>   #define MSM_VFE_PAD_SINK 0
>   #define MSM_VFE_PAD_SRC 1
>   #define MSM_VFE_PADS_NUM 2
> @@ -38,14 +37,14 @@
>   #define to_vfe(ptr_line)	\
>   	container_of(vfe_line_array(ptr_line), struct vfe_device, line)
>   
> -
>   enum vfe_output_state {
>   	VFE_OUTPUT_OFF,
>   	VFE_OUTPUT_RESERVED,
>   	VFE_OUTPUT_SINGLE,
>   	VFE_OUTPUT_CONTINUOUS,
>   	VFE_OUTPUT_IDLE,
> -	VFE_OUTPUT_STOPPING
> +	VFE_OUTPUT_STOPPING,
> +	VFE_OUTPUT_ON,
>   };
>   
>   enum vfe_line_id {
> @@ -53,6 +52,7 @@ enum vfe_line_id {
>   	VFE_LINE_RDI0 = 0,
>   	VFE_LINE_RDI1 = 1,
>   	VFE_LINE_RDI2 = 2,
> +	VFE_LINE_NUM_GEN2 = 3,
>   	VFE_LINE_PIX = 3,
>   	VFE_LINE_NUM_GEN1 = 4,
>   	VFE_LINE_NUM_MAX = 4
> @@ -73,6 +73,9 @@ struct vfe_output {
>   			int active_buf;
>   			int wait_sof;
>   		} gen1;
> +		struct {
> +			int active_num;
> +		} gen2;
>   	};
>   	enum vfe_output_state state;
>   	unsigned int sequence;
> @@ -171,14 +174,6 @@ void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)
>   
>   struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
>   
> -/*
> - * vfe_disable - Disable streaming on VFE line
> - * @line: VFE line
> - *
> - * Return 0 on success or a negative error code otherwise
> - */
> -int vfe_disable(struct vfe_line *line);
> -
>   int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
>   
>   /*
> @@ -193,8 +188,17 @@ int vfe_put_output(struct vfe_line *line);
>   int vfe_release_wm(struct vfe_device *vfe, u8 wm);
>   int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
>   
> +/*
> + * vfe_reset - Trigger reset on VFE module and wait to complete
> + * @vfe: VFE device
> + *
> + * Return 0 on success or a negative error code otherwise
> + */
> +int vfe_reset(struct vfe_device *vfe);
> +
>   extern const struct vfe_hw_ops vfe_ops_4_1;
>   extern const struct vfe_hw_ops vfe_ops_4_7;
>   extern const struct vfe_hw_ops vfe_ops_4_8;
> +extern const struct vfe_hw_ops vfe_ops_170;
>   
>   #endif /* QC_MSM_CAMSS_VFE_H */
> diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
> index 97cea7c4d769..f282275af626 100644
> --- a/drivers/media/platform/qcom/camss/camss-video.c
> +++ b/drivers/media/platform/qcom/camss/camss-video.c
> @@ -133,6 +133,55 @@ static const struct camss_format_info formats_rdi_8x96[] = {
>   	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>   };
>   
> +static const struct camss_format_info formats_rdi_845[] = {
> +	{ MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> +	{ MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> +	{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> +	{ MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> +	{ MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> +	{ MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> +	{ MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> +	{ MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> +	{ MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> +	{ MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> +	{ MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> +	{ MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> +	{ MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> +	{ MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> +	{ MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> +	{ MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> +	{ MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> +	{ MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> +	{ MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> +	{ MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> +	{ MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> +	{ MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> +	{ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
> +	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> +};
> +
>   static const struct camss_format_info formats_pix_8x16[] = {
>   	{ MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
>   	  { { 1, 1 } }, { { 2, 3 } }, { 8 } },
> @@ -960,6 +1009,9 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
>   			video->formats = formats_rdi_8x96;
>   			video->nformats = ARRAY_SIZE(formats_rdi_8x96);
>   		}
> +	}  else if (video->camss->version == CAMSS_845) {
> +		video->formats = formats_rdi_845;
> +		video->nformats = ARRAY_SIZE(formats_rdi_845);
>   	} else {
>   		ret = -EINVAL;
>   		goto error_video_register;
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index 6c6f1e59ccd8..0e006def1996 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -465,6 +465,67 @@ static const struct resources vfe_res_660[] = {
>   	}
>   };
>   
> +static const struct resources vfe_res_845[] = {
> +	/* VFE0 */
> +	{
> +		.regulator = { NULL },
> +		.clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
> +				"soc_ahb", "vfe0", "vfe0_axi",
> +				"vfe0_src", "csi0",
> +				"csi0_src"},
> +		.clock_rate = { { 0 },
> +				{ 0 },
> +				{ 80000000 },
> +				{ 0 },
> +				{ 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
> +				{ 0 },
> +				{ 320000000 },
> +				{ 19200000, 75000000, 384000000, 538666667 },
> +				{ 384000000 } },
> +		.reg = { "vfe0" },
> +		.interrupt = { "vfe0" }
> +	},
> +
> +	/* VFE1 */
> +	{
> +		.regulator = { NULL },
> +		.clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
> +				"soc_ahb", "vfe1", "vfe1_axi",
> +				"vfe1_src", "csi1",
> +				"csi1_src"},
> +		.clock_rate = { { 0 },
> +				{ 0 },
> +				{ 80000000 },
> +				{ 0 },
> +				{ 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
> +				{ 0 },
> +				{ 320000000 },
> +				{ 19200000, 75000000, 384000000, 538666667 },
> +				{ 384000000 } },
> +		.reg = { "vfe1" },
> +		.interrupt = { "vfe1" }
> +	},
> +
> +	/* VFE-lite */
> +	{
> +		.regulator = { NULL },
> +		.clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
> +				"soc_ahb", "vfe_lite",
> +				"vfe_lite_src", "csi2",
> +				"csi2_src"},
> +		.clock_rate = { { 0 },
> +				{ 0 },
> +				{ 80000000 },
> +				{ 0 },
> +				{ 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
> +				{ 320000000 },
> +				{ 19200000, 75000000, 384000000, 538666667 },
> +				{ 384000000 } },
> +		.reg = { "vfe_lite" },
> +		.interrupt = { "vfe_lite" }
> +	}
> +};
> +
>   /*
>    * camss_add_clock_margin - Add margin to clock frequency rate
>    * @rate: Clock frequency rate
>
Robert Foss Feb. 22, 2021, 4:37 p.m. UTC | #2 
On Sat, 20 Feb 2021 at 22:40, Andrey Konovalov
<andrey.konovalov@linaro.org> wrote:
>

> Hi Robert,

>

> Thank you for your patch!

>

> On 17.02.2021 14:21, Robert Foss wrote:

> > Add register definitions for version 170 of the Titan architecture

> > and implement support for the RDI output mode.

> >

> > The RDI mode as opposed to the PIX output mode for the VFE unit does

> > not support any ISP functionality. This means essentially only

> > supporting dumping the output of the whatever the CSI decoder receives

> > from the sensor.

> >

> > For example will a sensor outputting YUV pixel format frames, only

> > allow the VFE to dump those frames as they are received by the ISP

> > to memory through the RDI interface.

> >

> > Signed-off-by: Robert Foss <robert.foss@linaro.org>

> > ---

> >

> >

> > Changes since v1:

> >   - Andrey: Remove commented out chunk

> >   - Remove left over WIP comments

> >

> > Changes since v4:

> >   - Andrey: Remove traces of PIX support

> >   - Andrey: Fix vfe_global_reset() overwriting reset command

> >   - Remove unused variable

> >

> >

> >

> >   drivers/media/platform/qcom/camss/Makefile    |   1 +

> >   .../media/platform/qcom/camss/camss-vfe-170.c | 790 ++++++++++++++++++

> >   drivers/media/platform/qcom/camss/camss-vfe.c |  47 +-

> >   drivers/media/platform/qcom/camss/camss-vfe.h |  26 +-

> >   .../media/platform/qcom/camss/camss-video.c   |  52 ++

> >   drivers/media/platform/qcom/camss/camss.c     |  61 ++

> >   6 files changed, 957 insertions(+), 20 deletions(-)

> >   create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c

> >

> > diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile

> > index 940c0ae3e003..052c4f405fa3 100644

> > --- a/drivers/media/platform/qcom/camss/Makefile

> > +++ b/drivers/media/platform/qcom/camss/Makefile

> > @@ -11,6 +11,7 @@ qcom-camss-objs += \

> >               camss-vfe-4-1.o \

> >               camss-vfe-4-7.o \

> >               camss-vfe-4-8.o \

> > +             camss-vfe-170.o \

> >               camss-vfe-gen1.o \

> >               camss-vfe.o \

> >               camss-video.o \

> > diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c

> > new file mode 100644

> > index 000000000000..c4991b1f22f8

> > --- /dev/null

> > +++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c

> > @@ -0,0 +1,790 @@

> > +// SPDX-License-Identifier: GPL-2.0

> > +/*

> > + * camss-vfe-4-7.c

> > + *

> > + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7

> > + *

> > + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.

> > + * Copyright (C) 2015-2018 Linaro Ltd.

>

> - it looks like the header comes from v4.7 without updating to Titan 170


Gotcha, thanks!

>

> > + */

> > +

> > +#include <linux/delay.h>

> > +#include <linux/interrupt.h>

> > +#include <linux/io.h>

> > +#include <linux/iopoll.h>

> > +

> > +#include "camss.h"

> > +#include "camss-vfe.h"

> > +

> > +#define VFE_HW_VERSION                               (0x000)

> > +

> > +#define VFE_GLOBAL_RESET_CMD                 (0x018)

> > +#define              GLOBAL_RESET_CMD_CORE           BIT(0)

> > +#define              GLOBAL_RESET_CMD_CAMIF          BIT(1)

> > +#define              GLOBAL_RESET_CMD_BUS            BIT(2)

> > +#define              GLOBAL_RESET_CMD_BUS_BDG        BIT(3)

> > +#define              GLOBAL_RESET_CMD_REGISTER       BIT(4)

> > +#define              GLOBAL_RESET_CMD_PM             BIT(5)

> > +#define              GLOBAL_RESET_CMD_BUS_MISR       BIT(6)

> > +#define              GLOBAL_RESET_CMD_TESTGEN        BIT(7)

> > +#define              GLOBAL_RESET_CMD_DSP            BIT(8)

> > +#define              GLOBAL_RESET_CMD_IDLE_CGC       BIT(9)

> > +#define              GLOBAL_RESET_CMD_RDI0           BIT(10)

> > +#define              GLOBAL_RESET_CMD_RDI1           BIT(11)

> > +#define              GLOBAL_RESET_CMD_RDI2           BIT(12)

> > +#define              GLOBAL_RESET_CMD_RDI3           BIT(13)

> > +#define              GLOBAL_RESET_CMD_VFE_DOMAIN     BIT(30)

> > +#define              GLOBAL_RESET_CMD_RESET_BYPASS   BIT(31)

> > +

> > +

> > +#define VFE_CORE_CFG                         (0x050)

> > +#define              CFG_PIXEL_PATTERN_YCBYCR        (0x4)

> > +#define              CFG_PIXEL_PATTERN_YCRYCB        (0x5)

> > +#define              CFG_PIXEL_PATTERN_CBYCRY        (0x6)

> > +#define              CFG_PIXEL_PATTERN_CRYCBY        (0x7)

> > +#define              CFG_COMPOSITE_REG_UPDATE_EN     BIT(4)

> > +

> > +#define VFE_IRQ_CMD                          (0x058)

> > +#define              CMD_GLOBAL_CLEAR                BIT(0)

> > +

> > +#define VFE_IRQ_MASK_0                                       (0x05c)

> > +#define              MASK_0_CAMIF_SOF                        BIT(0)

> > +#define              MASK_0_CAMIF_EOF                        BIT(1)

> > +#define              MASK_0_RDI_REG_UPDATE(n)                BIT((n) + 5)

> > +#define              MASK_0_IMAGE_MASTER_n_PING_PONG(n)      BIT((n) + 8)

> > +#define              MASK_0_IMAGE_COMPOSITE_DONE_n(n)        BIT((n) + 25)

> > +#define              MASK_0_RESET_ACK                        BIT(31)

> > +

> > +#define VFE_IRQ_MASK_1                                       (0x060)

> > +#define              MASK_1_CAMIF_ERROR                      BIT(0)

> > +#define              MASK_1_VIOLATION                        BIT(7)

> > +#define              MASK_1_BUS_BDG_HALT_ACK                 BIT(8)

> > +#define              MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n)   BIT((n) + 9)

> > +#define              MASK_1_RDI_SOF(n)                       BIT((n) + 29)

> > +

> > +#define VFE_IRQ_CLEAR_0                                      (0x064)

> > +#define VFE_IRQ_CLEAR_1                                      (0x068)

> > +

> > +#define VFE_IRQ_STATUS_0                             (0x06c)

> > +#define              STATUS_0_CAMIF_SOF                      BIT(0)

> > +#define              STATUS_0_RDI_REG_UPDATE(n)              BIT((n) + 5)

> > +#define              STATUS_0_IMAGE_MASTER_PING_PONG(n)      BIT((n) + 8)

> > +#define              STATUS_0_IMAGE_COMPOSITE_DONE(n)        BIT((n) + 25)

> > +#define              STATUS_0_RESET_ACK                      BIT(31)

> > +

> > +#define VFE_IRQ_STATUS_1                             (0x070)

> > +#define              STATUS_1_VIOLATION                      BIT(7)

> > +#define              STATUS_1_BUS_BDG_HALT_ACK               BIT(8)

> > +#define              STATUS_1_RDI_SOF(n)                     BIT((n) + 27)

> > +

> > +#define VFE_VIOLATION_STATUS                 (0x07c)

> > +

> > +#define VFE_CAMIF_CMD                                (0x478)

> > +#define              CMD_CLEAR_CAMIF_STATUS          BIT(2)

> > +

> > +#define VFE_CAMIF_CFG                                (0x47c)

> > +#define              CFG_VSYNC_SYNC_EDGE             (0)

> > +#define                      VSYNC_ACTIVE_HIGH       (0)

> > +#define                      VSYNC_ACTIVE_LOW        (1)

> > +#define              CFG_HSYNC_SYNC_EDGE             (1)

> > +#define                      HSYNC_ACTIVE_HIGH       (0)

> > +#define                      HSYNC_ACTIVE_LOW        (1)

> > +#define              CFG_VFE_SUBSAMPLE_ENABLE        BIT(4)

> > +#define              CFG_BUS_SUBSAMPLE_ENABLE        BIT(5)

> > +#define              CFG_VFE_OUTPUT_EN               BIT(6)

> > +#define              CFG_BUS_OUTPUT_EN               BIT(7)

> > +#define              CFG_BINNING_EN                  BIT(9)

> > +#define              CFG_FRAME_BASED_EN              BIT(10)

> > +#define              CFG_RAW_CROP_EN                 BIT(22)

> > +

> > +// XXX different, don't exist in TITAN register docs

> > +#define VFE_0_CAMIF_FRAME_CFG                        0x484

> > +#define VFE_0_CAMIF_WINDOW_WIDTH_CFG         0x488

> > +#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG                0x48c

> > +#define VFE_0_CAMIF_SUBSAMPLE_CFG            0x490

> > +#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN    0x498

> > +#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN    0x49c

> > +#define VFE_0_CAMIF_STATUS                   0x4a4

> > +#define VFE_0_CAMIF_STATUS_HALT                      BIT(31)

> > +#define CAMIF_TIMEOUT_SLEEP_US 1000

> > +#define CAMIF_TIMEOUT_ALL_US 1000000

> > +

> > +#define VFE_REG_UPDATE_CMD                   (0x4ac)

> > +#define              REG_UPDATE_RDI(n)               BIT(1 + (n))

> > +

> > +

> > +#define VFE_BUS_IRQ_MASK(n)          (0x2044 + (n) * 4)

> > +#define VFE_BUS_IRQ_CLEAR(n)         (0x2050 + (n) * 4)

> > +

> > +#define VFE_BUS_IRQ_STATUS(n)                (0x205c + (n) * 4)

> > +#define              STATUS0_COMP_RESET_DONE         BIT(0)

> > +#define              STATUS0_COMP_REG_UPDATE0_DONE   BIT(1)

> > +#define              STATUS0_COMP_REG_UPDATE1_DONE   BIT(2)

> > +#define              STATUS0_COMP_REG_UPDATE2_DONE   BIT(3)

> > +#define              STATUS0_COMP_REG_UPDATE3_DONE   BIT(4)

> > +#define              STATUS0_COMP_REG_UPDATE_DONE(n) BIT(n + 1)

> > +#define              STATUS0_COMP0_BUF_DONE          BIT(5)

> > +#define              STATUS0_COMP1_BUF_DONE          BIT(6)

> > +#define              STATUS0_COMP2_BUF_DONE          BIT(7)

> > +#define              STATUS0_COMP3_BUF_DONE          BIT(8)

> > +#define              STATUS0_COMP4_BUF_DONE          BIT(9)

> > +#define              STATUS0_COMP5_BUF_DONE          BIT(10)

> > +#define              STATUS0_COMP_BUF_DONE(n)        BIT(n + 5)

> > +#define              STATUS0_COMP_ERROR              BIT(11)

> > +#define              STATUS0_COMP_OVERWRITE          BIT(12)

> > +#define              STATUS0_OVERFLOW                BIT(13)

> > +#define              STATUS0_VIOLATION               BIT(14)

> > +/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */

> > +#define              STATUS1_WM_CLIENT_BUF_DONE(n)           BIT(n)

> > +#define              STATUS1_EARLY_DONE                      BIT(24)

> > +#define              STATUS2_DUAL_COMP0_BUF_DONE             BIT(0)

> > +#define              STATUS2_DUAL_COMP1_BUF_DONE             BIT(1)

> > +#define              STATUS2_DUAL_COMP2_BUF_DONE             BIT(2)

> > +#define              STATUS2_DUAL_COMP3_BUF_DONE             BIT(3)

> > +#define              STATUS2_DUAL_COMP4_BUF_DONE             BIT(4)

> > +#define              STATUS2_DUAL_COMP5_BUF_DONE             BIT(5)

> > +#define              STATUS2_DUAL_COMP_BUF_DONE(n)           BIT(n)

> > +#define              STATUS2_DUAL_COMP_ERROR                 BIT(6)

> > +#define              STATUS2_DUAL_COMP_OVERWRITE             BIT(7)

> > +

> > +#define VFE_BUS_IRQ_CLEAR_GLOBAL             (0x2068)

> > +

> > +#define VFE_BUS_WM_DEBUG_STATUS_CFG          (0x226c)

> > +#define              DEBUG_STATUS_CFG_STATUS0(n)     BIT(n)

> > +#define              DEBUG_STATUS_CFG_STATUS1(n)     BIT(8+n)

> > +

> > +#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER    (0x2080)

> > +

> > +#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC         (0x2084)

> > +#define              BUS_VER2_MAX_CLIENTS (24)

> > +#define              WM_ADDR_NO_SYNC_DEFAULT_VAL \

> > +                             ((1 << BUS_VER2_MAX_CLIENTS) - 1)

> > +

> > +#define VFE_BUS_WM_CGC_OVERRIDE                      (0x200c)

> > +#define              WM_CGC_OVERRIDE_ALL             (0xFFFFF)

> > +

> > +#define VFE_BUS_WM_TEST_BUS_CTRL             (0x211c)

> > +

> > +#define VFE_BUS_WM_STATUS0(n)                        (0x2200 + (n) * 0x100)

> > +#define VFE_BUS_WM_STATUS1(n)                        (0x2204 + (n) * 0x100)

> > +#define VFE_BUS_WM_CFG(n)                    (0x2208 + (n) * 0x100)

> > +#define              WM_CFG_EN                       (0)

> > +#define              WM_CFG_MODE                     (1)

> > +#define                      MODE_QCOM_PLAIN (0)

> > +#define                      MODE_MIPI_RAW   (1)

> > +#define              WM_CFG_VIRTUALFRAME             (2)

> > +#define VFE_BUS_WM_HEADER_ADDR(n)            (0x220c + (n) * 0x100)

> > +#define VFE_BUS_WM_HEADER_CFG(n)             (0x2210 + (n) * 0x100)

> > +#define VFE_BUS_WM_IMAGE_ADDR(n)             (0x2214 + (n) * 0x100)

> > +#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n)              (0x2218 + (n) * 0x100)

> > +#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n)               (0x221c + (n) * 0x100)

> > +#define              WM_BUFFER_DEFAULT_WIDTH         (0xFF01)

> > +

> > +#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n)              (0x2220 + (n) * 0x100)

> > +#define VFE_BUS_WM_PACKER_CFG(n)             (0x2224 + (n) * 0x100)

> > +

> > +#define VFE_BUS_WM_STRIDE(n)                 (0x2228 + (n) * 0x100)

> > +#define              WM_STRIDE_DEFAULT_STRIDE        (0xFF01)

> > +

> > +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)   (0x2248 + (n) * 0x100)

> > +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)  (0x224c + (n) * 0x100)

> > +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)               (0x2250 + (n) * 0x100)

> > +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)              (0x2254 + (n) * 0x100)

> > +#define VFE_BUS_WM_FRAME_INC(n)                      (0x2258 + (n) * 0x100)

> > +#define VFE_BUS_WM_BURST_LIMIT(n)            (0x225c + (n) * 0x100)

> > +

> > +

> > +static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)

> > +{

> > +     u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);

> > +

> > +     u32 gen = (hw_version >> 28) & 0xF;

> > +     u32 rev = (hw_version >> 16) & 0xFFF;

> > +     u32 step = hw_version & 0xFFFF;

> > +

> > +     dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);

> > +}

> > +

> > +static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)

> > +{

> > +     u32 bits = readl_relaxed(vfe->base + reg);

> > +

> > +     writel_relaxed(bits & ~clr_bits, vfe->base + reg);

> > +}

> > +

> > +static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)

> > +{

> > +     u32 bits = readl_relaxed(vfe->base + reg);

> > +

> > +     writel_relaxed(bits | set_bits, vfe->base + reg);

> > +}

> > +

> > +static void vfe_global_reset(struct vfe_device *vfe)

> > +{

> > +     u32 reset_bits = GLOBAL_RESET_CMD_CORE          |

> > +                      GLOBAL_RESET_CMD_CAMIF         |

> > +                      GLOBAL_RESET_CMD_BUS           |

> > +                      GLOBAL_RESET_CMD_REGISTER      |

> > +                      GLOBAL_RESET_CMD_PM            |

> > +                      GLOBAL_RESET_CMD_BUS_MISR      |

> > +                      GLOBAL_RESET_CMD_IDLE_CGC      |

> > +                      GLOBAL_RESET_CMD_RDI0          |

> > +                      GLOBAL_RESET_CMD_RDI1          |

> > +                      GLOBAL_RESET_CMD_RDI2;

>

> - so the reset_bits is set to 0x00001E77 in v5.

>

> In v4 the reset_bits was set to 0x00003F9F which corresponds to:

>

>         GLOBAL_RESET_CMD_CORE           |

>         GLOBAL_RESET_CMD_CAMIF          |

>         GLOBAL_RESET_CMD_BUS            |

>         GLOBAL_RESET_CMD_BUS_BDG        |

>         GLOBAL_RESET_CMD_REGISTER       |

>         GLOBAL_RESET_CMD_TESTGEN        |

>         GLOBAL_RESET_CMD_DSP            |

>         GLOBAL_RESET_CMD_IDLE_CGC       |

>         GLOBAL_RESET_CMD_RDI0           |

>         GLOBAL_RESET_CMD_RDI1           |

>         GLOBAL_RESET_CMD_RDI2           |

>         GLOBAL_RESET_CMD_RDI3;

>

> So the difference between v4 and v5 is:

>

> reset in v4, not reset in v5:

>         GLOBAL_RESET_CMD_BUS_BDG

>         GLOBAL_RESET_CMD_TESTGEN

>         GLOBAL_RESET_CMD_DSP

>

> reset in v5, not reset in v4:

>         GLOBAL_RESET_CMD_PM

>         GLOBAL_RESET_CMD_BUS_MISR

>

> - correct?

>

>    It is probably worth a few words in the v4 vs v5 changelog.

>

>    (dropping GLOBAL_RESET_CMD_RDI3 in v5 is clear - Titan 170 has only RDI0 to RDI2

>    according to the driver code)

>


Great catch! I made a mistake with the bit-ordering after doing a
hex->binary translation.
I'll straighten this out in v6.

> > +

> > +     writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);

> > +

> > +     /* Make sure IRQ mask has been written before resetting */

> > +     wmb();

> > +

> > +     writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);

> > +}

> > +

> > +static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)

> > +{

> > +     u32 val;

> > +

> > +     /*Set Debug Registers*/

> > +     val = DEBUG_STATUS_CFG_STATUS0(1) |

> > +           DEBUG_STATUS_CFG_STATUS0(7);

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);

> > +

> > +     /* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */

> > +     writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);

> > +

> > +     /* no clock gating at bus input */

> > +     val = WM_CGC_OVERRIDE_ALL;

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);

> > +

> > +     writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);

> > +

> > +     /* if addr_no_sync has default value then config the addr no sync reg */

> > +     val = WM_ADDR_NO_SYNC_DEFAULT_VAL;

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);

> > +

> > +     writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));

> > +

> > +     val = WM_BUFFER_DEFAULT_WIDTH;

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));

> > +

> > +     val = 0;

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));

> > +

> > +     val = 0;

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?

> > +

> > +     /* Configure stride for RDIs */

> > +     //val = pix->plane_fmt[0].bytesperline;

> > +     val = WM_STRIDE_DEFAULT_STRIDE;

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));

> > +

> > +     /* Enable WM */

> > +     val = 1 << WM_CFG_EN |

> > +           MODE_MIPI_RAW << WM_CFG_MODE;

> > +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));

> > +}

> > +

> > +static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)

> > +{

> > +     /* Disable WM */

> > +     writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));

> > +}

> > +

> > +static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,

> > +                       struct vfe_line *line)

> > +{

> > +     struct v4l2_pix_format_mplane *pix =

> > +             &line->video_out.active_fmt.fmt.pix_mp;

> > +     u32 stride = pix->plane_fmt[0].bytesperline;

> > +

> > +     writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));

> > +     writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));

> > +}

> > +

> > +static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)

> > +{

> > +     vfe->reg_update |= REG_UPDATE_RDI(line_id);

> > +

> > +     /* Enforce ordering between previous reg writes and reg update */

> > +     wmb();

> > +

> > +     writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);

> > +

> > +     /* Enforce ordering between reg update and subsequent reg writes */

> > +     wmb();

> > +}

> > +

> > +static inline void vfe_reg_update_clear(struct vfe_device *vfe,

> > +                                     enum vfe_line_id line_id)

> > +{

> > +     vfe->reg_update &= ~REG_UPDATE_RDI(line_id);

> > +}

> > +

> > +static void vfe_enable_irq_common(struct vfe_device *vfe)

> > +{

> > +     vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);

> > +     vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);

> > +

> > +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));

> > +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));

> > +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));

>

> Looking at the #defines in the beginning of this file, only part

> of the IRQ sources (not the whole 32 per each register) are used

> or defined.

>

> Is it safe to unmask the unused (reserved?) bits in the above 5

> IRQ mask registers?


Unfortunately this register is not defined at all in any documentation
of the downstream[1] kernel, so I think the situation is actually a
bit worse than what you've pointed out here.
I'd like to remove the register defines above since I don't have a
reliable source for them. But I would like to keep the register writes
just as they are since that seems to work.

What are your thoughts?

[1] https://git.linaro.org/people/robert.foss/linux.git/log/?h=msm_sdm845

>

> > +}

> > +

> > +static void vfe_isr_halt_ack(struct vfe_device *vfe)

> > +{

> > +     complete(&vfe->halt_complete);

> > +}

> > +

> > +static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)

> > +{

> > +     *status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);

> > +     *status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);

> > +

> > +     writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);

> > +     writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);

> > +

> > +     /* Enforce ordering between IRQ Clear and Global IRQ Clear */

> > +     wmb();

> > +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);

> > +}

> > +

> > +static void vfe_violation_read(struct vfe_device *vfe)

> > +{

> > +     u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);

> > +

> > +     pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);

> > +}

> > +

> > +/*

> > + * vfe_isr - VFE module interrupt handler

> > + * @irq: Interrupt line

> > + * @dev: VFE device

> > + *

> > + * Return IRQ_HANDLED on success

> > + */

> > +static irqreturn_t vfe_isr(int irq, void *dev)

> > +{

> > +     struct vfe_device *vfe = dev;

> > +     u32 status0, status1, vfe_bus_status[3];

> > +     int i, wm;

> > +

> > +     status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);

> > +     status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);

> > +

> > +     writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);

> > +     writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);

> > +

> > +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {

> > +             vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));

> > +             writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));

> > +     }

> > +

> > +     /* Enforce ordering between IRQ reading and interpretation */

> > +     wmb();

> > +

> > +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);

> > +     writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);

> > +

> > +     if (status0 & STATUS_0_RESET_ACK)

> > +             vfe->isr_ops.reset_ack(vfe);

> > +

> > +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)

> > +             if (status0 & STATUS_0_RDI_REG_UPDATE(i))

> > +                     vfe->isr_ops.reg_update(vfe, i);

> > +

> > +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)

> > +             if (status0 & STATUS_1_RDI_SOF(i))

> > +                     vfe->isr_ops.sof(vfe, i);

> > +

> > +     for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)

> > +             if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))

> > +                     vfe->isr_ops.comp_done(vfe, i);

> > +

> > +     for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)

> > +             if (status0 & BIT(9))

> > +                     if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))

> > +                             vfe->isr_ops.wm_done(vfe, wm);

> > +

> > +     return IRQ_HANDLED;

> > +}

> > +

> > +/*

> > + * vfe_halt - Trigger halt on VFE module and wait to complete

> > + * @vfe: VFE device

> > + *

> > + * Return 0 on success or a negative error code otherwise

> > + */

> > +static int vfe_halt(struct vfe_device *vfe)

> > +{

> > +     unsigned long time;

> > +

> > +     return 0;

> > +

> > +     reinit_completion(&vfe->halt_complete);

> > +

> > +     time = wait_for_completion_timeout(&vfe->halt_complete,

> > +             msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));

> > +     if (!time) {

> > +             dev_err(vfe->camss->dev, "VFE halt timeout\n");

> > +             return -EIO;

> > +     }

> > +

> > +     return 0;

> > +}

> > +

> > +static int vfe_get_output(struct vfe_line *line)

> > +{

> > +     struct vfe_device *vfe = to_vfe(line);

> > +     struct vfe_output *output;

> > +     unsigned long flags;

> > +     int i;

> > +     int wm_idx;

> > +

> > +     spin_lock_irqsave(&vfe->output_lock, flags);

> > +

> > +     output = &line->output;

> > +     if (output->state != VFE_OUTPUT_OFF) {

> > +             dev_err(vfe->camss->dev, "Output is running\n");

> > +             goto error;

> > +     }

> > +

> > +     output->wm_num = 1;

> > +

> > +     for (i = 0; i < output->wm_num; i++) {

>

> - this for loop can now be omitted ("for (i = 0; i < 1; i++)" is just one pass) ...


Ack.

>

> > +             wm_idx = vfe_reserve_wm(vfe, line->id);

> > +             if (wm_idx < 0) {

> > +                     dev_err(vfe->camss->dev, "Can not reserve wm\n");

> > +                     goto error_get_wm;

> > +             }

> > +             output->wm_idx[i] = wm_idx;

> > +     }

> > +

> > +     output->drop_update_idx = 0;

> > +

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +

> > +     return 0;

> > +

> > +error_get_wm:

> > +     for (i--; i >= 0; i--)

>

> - ... and this one too. And the "i" local var is no longer needed.


Ack

>

> Thanks,

> Andrey

>

> > +             vfe_release_wm(vfe, output->wm_idx[i]);

> > +     output->state = VFE_OUTPUT_OFF;

> > +error:

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +

> > +     return -EINVAL;

> > +}

> > +

> > +static int vfe_enable_output(struct vfe_line *line)

> > +{

> > +     struct vfe_device *vfe = to_vfe(line);

> > +     struct vfe_output *output = &line->output;

> > +     const struct vfe_hw_ops *ops = vfe->ops;

> > +     struct media_entity *sensor;

> > +     unsigned long flags;

> > +     unsigned int frame_skip = 0;

> > +     unsigned int i;

> > +

> > +     sensor = camss_find_sensor(&line->subdev.entity);

> > +     if (sensor) {

> > +             struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);

> > +

> > +             v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);

> > +             /* Max frame skip is 29 frames */

> > +             if (frame_skip > VFE_FRAME_DROP_VAL - 1)

> > +                     frame_skip = VFE_FRAME_DROP_VAL - 1;

> > +     }

> > +

> > +     spin_lock_irqsave(&vfe->output_lock, flags);

> > +

> > +     ops->reg_update_clear(vfe, line->id);

> > +

> > +     if (output->state != VFE_OUTPUT_OFF) {

> > +             dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",

> > +                     output->state);

> > +             spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +             return -EINVAL;

> > +     }

> > +

> > +     WARN_ON(output->gen2.active_num);

> > +

> > +     output->state = VFE_OUTPUT_ON;

> > +

> > +     output->sequence = 0;

> > +     output->wait_reg_update = 0;

> > +     reinit_completion(&output->reg_update);

> > +

> > +     vfe_wm_start(vfe, output->wm_idx[0], line);

> > +

> > +     for (i = 0; i < 2; i++) {

> > +             output->buf[i] = vfe_buf_get_pending(output);

> > +             if (!output->buf[i])

> > +                     break;

> > +             output->gen2.active_num++;

> > +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);

> > +     }

> > +

> > +     ops->reg_update(vfe, line->id);

> > +

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +

> > +     return 0;

> > +}

> > +

> > +static int vfe_disable_output(struct vfe_line *line)

> > +{

> > +     struct vfe_device *vfe = to_vfe(line);

> > +     struct vfe_output *output = &line->output;

> > +     unsigned long flags;

> > +     unsigned int i;

> > +     bool done;

> > +     int timeout = 0;

> > +

> > +     do {

> > +             spin_lock_irqsave(&vfe->output_lock, flags);

> > +             done = !output->gen2.active_num;

> > +             spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +             usleep_range(10000, 20000);

> > +

> > +             if (timeout++ == 100) {

> > +                     dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");

> > +                     vfe_reset(vfe);

> > +                     output->gen2.active_num = 0;

> > +                     return 0;

> > +             }

> > +     } while (!done);

> > +

> > +     spin_lock_irqsave(&vfe->output_lock, flags);

> > +     for (i = 0; i < output->wm_num; i++)

> > +             vfe_wm_stop(vfe, output->wm_idx[i]);

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +

> > +     return 0;

> > +}

> > +

> > +/*

> > + * vfe_enable - Enable streaming on VFE line

> > + * @line: VFE line

> > + *

> > + * Return 0 on success or a negative error code otherwise

> > + */

> > +static int vfe_enable(struct vfe_line *line)

> > +{

> > +     struct vfe_device *vfe = to_vfe(line);

> > +     int ret;

> > +

> > +     mutex_lock(&vfe->stream_lock);

> > +

> > +     if (!vfe->stream_count)

> > +             vfe_enable_irq_common(vfe);

> > +

> > +     vfe->stream_count++;

> > +

> > +     mutex_unlock(&vfe->stream_lock);

> > +

> > +     ret = vfe_get_output(line);

> > +     if (ret < 0)

> > +             goto error_get_output;

> > +

> > +     ret = vfe_enable_output(line);

> > +     if (ret < 0)

> > +             goto error_enable_output;

> > +

> > +     vfe->was_streaming = 1;

> > +

> > +     return 0;

> > +

> > +

> > +error_enable_output:

> > +     vfe_put_output(line);

> > +

> > +error_get_output:

> > +     mutex_lock(&vfe->stream_lock);

> > +

> > +     vfe->stream_count--;

> > +

> > +     mutex_unlock(&vfe->stream_lock);

> > +

> > +     return ret;

> > +}

> > +

> > +/*

> > + * vfe_disable - Disable streaming on VFE line

> > + * @line: VFE line

> > + *

> > + * Return 0 on success or a negative error code otherwise

> > + */

> > +static int vfe_disable(struct vfe_line *line)

> > +{

> > +     struct vfe_device *vfe = to_vfe(line);

> > +

> > +     vfe_disable_output(line);

> > +

> > +     vfe_put_output(line);

> > +

> > +     mutex_lock(&vfe->stream_lock);

> > +

> > +     vfe->stream_count--;

> > +

> > +     mutex_unlock(&vfe->stream_lock);

> > +

> > +     return 0;

> > +}

> > +

> > +/*

> > + * vfe_isr_sof - Process start of frame interrupt

> > + * @vfe: VFE Device

> > + * @line_id: VFE line

> > + */

> > +static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)

> > +{

> > +

> > +}

> > +

> > +/*

> > + * vfe_isr_reg_update - Process reg update interrupt

> > + * @vfe: VFE Device

> > + * @line_id: VFE line

> > + */

> > +static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)

> > +{

> > +     struct vfe_output *output;

> > +     unsigned long flags;

> > +

> > +     spin_lock_irqsave(&vfe->output_lock, flags);

> > +     vfe->ops->reg_update_clear(vfe, line_id);

> > +

> > +     output = &vfe->line[line_id].output;

> > +

> > +     if (output->wait_reg_update) {

> > +             output->wait_reg_update = 0;

> > +             complete(&output->reg_update);

> > +     }

> > +

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +}

> > +

> > +/*

> > + * vfe_isr_wm_done - Process write master done interrupt

> > + * @vfe: VFE Device

> > + * @wm: Write master id

> > + */

> > +static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)

> > +{

> > +     struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];

> > +     struct camss_buffer *ready_buf;

> > +     struct vfe_output *output;

> > +     unsigned long flags;

> > +     u32 index;

> > +     u64 ts = ktime_get_ns();

> > +

> > +     spin_lock_irqsave(&vfe->output_lock, flags);

> > +

> > +     if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {

> > +             dev_err_ratelimited(vfe->camss->dev,

> > +                                 "Received wm done for unmapped index\n");

> > +             goto out_unlock;

> > +     }

> > +     output = &vfe->line[vfe->wm_output_map[wm]].output;

> > +

> > +     ready_buf = output->buf[0];

> > +     if (!ready_buf) {

> > +             dev_err_ratelimited(vfe->camss->dev,

> > +                                 "Missing ready buf %d!\n", output->state);

> > +             goto out_unlock;

> > +     }

> > +

> > +     ready_buf->vb.vb2_buf.timestamp = ts;

> > +     ready_buf->vb.sequence = output->sequence++;

> > +

> > +     index = 0;

> > +     output->buf[0] = output->buf[1];

> > +     if (output->buf[0])

> > +             index = 1;

> > +

> > +     output->buf[index] = vfe_buf_get_pending(output);

> > +

> > +     if (output->buf[index])

> > +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);

> > +     else

> > +             output->gen2.active_num--;

> > +

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +

> > +     vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);

> > +

> > +     return;

> > +

> > +out_unlock:

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +}

> > +

> > +/*

> > + * vfe_queue_buffer - Add empty buffer

> > + * @vid: Video device structure

> > + * @buf: Buffer to be enqueued

> > + *

> > + * Add an empty buffer - depending on the current number of buffers it will be

> > + * put in pending buffer queue or directly given to the hardware to be filled.

> > + *

> > + * Return 0 on success or a negative error code otherwise

> > + */

> > +static int vfe_queue_buffer(struct camss_video *vid,

> > +                         struct camss_buffer *buf)

> > +{

> > +     struct vfe_line *line = container_of(vid, struct vfe_line, video_out);

> > +     struct vfe_device *vfe = to_vfe(line);

> > +     struct vfe_output *output;

> > +     unsigned long flags;

> > +

> > +     output = &line->output;

> > +

> > +     spin_lock_irqsave(&vfe->output_lock, flags);

> > +

> > +     if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {

> > +             output->buf[output->gen2.active_num++] = buf;

> > +             vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);

> > +     } else {

> > +             vfe_buf_add_pending(output, buf);

> > +     }

> > +

> > +     spin_unlock_irqrestore(&vfe->output_lock, flags);

> > +

> > +     return 0;

> > +}

> > +

> > +const struct vfe_isr_ops vfe_isr_ops_170 = {

> > +     .reset_ack = vfe_isr_reset_ack,

> > +     .halt_ack = vfe_isr_halt_ack,

> > +     .reg_update = vfe_isr_reg_update,

> > +     .sof = vfe_isr_sof,

> > +     .comp_done = vfe_isr_comp_done,

> > +     .wm_done = vfe_isr_wm_done,

> > +};

> > +

> > +static const struct camss_video_ops vfe_video_ops_170 = {

> > +     .queue_buffer = vfe_queue_buffer,

> > +     .flush_buffers = vfe_flush_buffers,

> > +};

> > +

> > +static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)

> > +{

> > +     vfe->isr_ops = vfe_isr_ops_170;

> > +     vfe->video_ops = vfe_video_ops_170;

> > +

> > +     vfe->line_num = VFE_LINE_NUM_GEN2;

> > +}

> > +

> > +const struct vfe_hw_ops vfe_ops_170 = {

> > +     .global_reset = vfe_global_reset,

> > +     .hw_version_read = vfe_hw_version_read,

> > +     .isr_read = vfe_isr_read,

> > +     .isr = vfe_isr,

> > +     .reg_update_clear = vfe_reg_update_clear,

> > +     .reg_update = vfe_reg_update,

> > +     .subdev_init = vfe_subdev_init,

> > +     .vfe_disable = vfe_disable,

> > +     .vfe_enable = vfe_enable,

> > +     .vfe_halt = vfe_halt,

> > +     .violation_read = vfe_violation_read,

> > +};

> > diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c

> > index 375843bd16af..6fafeb8a5484 100644

> > --- a/drivers/media/platform/qcom/camss/camss-vfe.c

> > +++ b/drivers/media/platform/qcom/camss/camss-vfe.c

> > @@ -96,6 +96,32 @@ static const struct vfe_format formats_pix_8x96[] = {

> >       { MEDIA_BUS_FMT_YVYU8_2X8, 8 },

> >   };

> >

> > +static const struct vfe_format formats_rdi_845[] = {

> > +     { MEDIA_BUS_FMT_UYVY8_2X8, 8 },

> > +     { MEDIA_BUS_FMT_VYUY8_2X8, 8 },

> > +     { MEDIA_BUS_FMT_YUYV8_2X8, 8 },

> > +     { MEDIA_BUS_FMT_YVYU8_2X8, 8 },

> > +     { MEDIA_BUS_FMT_SBGGR8_1X8, 8 },

> > +     { MEDIA_BUS_FMT_SGBRG8_1X8, 8 },

> > +     { MEDIA_BUS_FMT_SGRBG8_1X8, 8 },

> > +     { MEDIA_BUS_FMT_SRGGB8_1X8, 8 },

> > +     { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },

> > +     { MEDIA_BUS_FMT_SGBRG10_1X10, 10 },

> > +     { MEDIA_BUS_FMT_SGRBG10_1X10, 10 },

> > +     { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },

> > +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },

> > +     { MEDIA_BUS_FMT_SBGGR12_1X12, 12 },

> > +     { MEDIA_BUS_FMT_SGBRG12_1X12, 12 },

> > +     { MEDIA_BUS_FMT_SGRBG12_1X12, 12 },

> > +     { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },

> > +     { MEDIA_BUS_FMT_SBGGR14_1X14, 14 },

> > +     { MEDIA_BUS_FMT_SGBRG14_1X14, 14 },

> > +     { MEDIA_BUS_FMT_SGRBG14_1X14, 14 },

> > +     { MEDIA_BUS_FMT_SRGGB14_1X14, 14 },

> > +     { MEDIA_BUS_FMT_Y10_1X10, 10 },

> > +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },

> > +};

> > +

> >   /*

> >    * vfe_get_bpp - map media bus format to bits per pixel

> >    * @formats: supported media bus formats array

> > @@ -192,7 +218,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,

> >                       return sink_code;

> >               }

> >       else if (vfe->camss->version == CAMSS_8x96 ||

> > -              vfe->camss->version == CAMSS_660)

> > +              vfe->camss->version == CAMSS_660 ||

> > +              vfe->camss->version == CAMSS_845)

> >               switch (sink_code) {

> >               case MEDIA_BUS_FMT_YUYV8_2X8:

> >               {

> > @@ -256,13 +283,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,

> >               return 0;

> >   }

> >

> > -/*

> > - * vfe_reset - Trigger reset on VFE module and wait to complete

> > - * @vfe: VFE device

> > - *

> > - * Return 0 on success or a negative error code otherwise

> > - */

> > -static int vfe_reset(struct vfe_device *vfe)

> > +int vfe_reset(struct vfe_device *vfe)

> >   {

> >       unsigned long time;

> >

> > @@ -429,7 +450,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)

> >               struct camss_clock *clock = &vfe->clock[i];

> >

> >               if (!strcmp(clock->name, "vfe0") ||

> > -                 !strcmp(clock->name, "vfe1")) {

> > +                 !strcmp(clock->name, "vfe1") ||

> > +                 !strcmp(clock->name, "vfe_lite")) {

> >                       u64 min_rate = 0;

> >                       long rate;

> >

> > @@ -1268,6 +1290,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,

> >       case CAMSS_660:

> >               vfe->ops = &vfe_ops_4_8;

> >               break;

> > +

> > +     case CAMSS_845:

> > +             vfe->ops = &vfe_ops_170;

> > +             break;

> >       default:

> >               return -EINVAL;

> >       }

> > @@ -1379,6 +1405,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,

> >                               l->formats = formats_rdi_8x96;

> >                               l->nformats = ARRAY_SIZE(formats_rdi_8x96);

> >                       }

> > +             } else if (camss->version == CAMSS_845) {

> > +                     l->formats = formats_rdi_845;

> > +                     l->nformats = ARRAY_SIZE(formats_rdi_845);

> >               } else {

> >                       return -EINVAL;

> >               }

> > diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h

> > index aad5dc74c2c0..29b3d930ffc6 100644

> > --- a/drivers/media/platform/qcom/camss/camss-vfe.h

> > +++ b/drivers/media/platform/qcom/camss/camss-vfe.h

> > @@ -19,7 +19,6 @@

> >   #include "camss-video.h"

> >   #include "camss-vfe-gen1.h"

> >

> > -

> >   #define MSM_VFE_PAD_SINK 0

> >   #define MSM_VFE_PAD_SRC 1

> >   #define MSM_VFE_PADS_NUM 2

> > @@ -38,14 +37,14 @@

> >   #define to_vfe(ptr_line)    \

> >       container_of(vfe_line_array(ptr_line), struct vfe_device, line)

> >

> > -

> >   enum vfe_output_state {

> >       VFE_OUTPUT_OFF,

> >       VFE_OUTPUT_RESERVED,

> >       VFE_OUTPUT_SINGLE,

> >       VFE_OUTPUT_CONTINUOUS,

> >       VFE_OUTPUT_IDLE,

> > -     VFE_OUTPUT_STOPPING

> > +     VFE_OUTPUT_STOPPING,

> > +     VFE_OUTPUT_ON,

> >   };

> >

> >   enum vfe_line_id {

> > @@ -53,6 +52,7 @@ enum vfe_line_id {

> >       VFE_LINE_RDI0 = 0,

> >       VFE_LINE_RDI1 = 1,

> >       VFE_LINE_RDI2 = 2,

> > +     VFE_LINE_NUM_GEN2 = 3,

> >       VFE_LINE_PIX = 3,

> >       VFE_LINE_NUM_GEN1 = 4,

> >       VFE_LINE_NUM_MAX = 4

> > @@ -73,6 +73,9 @@ struct vfe_output {

> >                       int active_buf;

> >                       int wait_sof;

> >               } gen1;

> > +             struct {

> > +                     int active_num;

> > +             } gen2;

> >       };

> >       enum vfe_output_state state;

> >       unsigned int sequence;

> > @@ -171,14 +174,6 @@ void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)

> >

> >   struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);

> >

> > -/*

> > - * vfe_disable - Disable streaming on VFE line

> > - * @line: VFE line

> > - *

> > - * Return 0 on success or a negative error code otherwise

> > - */

> > -int vfe_disable(struct vfe_line *line);

> > -

> >   int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);

> >

> >   /*

> > @@ -193,8 +188,17 @@ int vfe_put_output(struct vfe_line *line);

> >   int vfe_release_wm(struct vfe_device *vfe, u8 wm);

> >   int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);

> >

> > +/*

> > + * vfe_reset - Trigger reset on VFE module and wait to complete

> > + * @vfe: VFE device

> > + *

> > + * Return 0 on success or a negative error code otherwise

> > + */

> > +int vfe_reset(struct vfe_device *vfe);

> > +

> >   extern const struct vfe_hw_ops vfe_ops_4_1;

> >   extern const struct vfe_hw_ops vfe_ops_4_7;

> >   extern const struct vfe_hw_ops vfe_ops_4_8;

> > +extern const struct vfe_hw_ops vfe_ops_170;

> >

> >   #endif /* QC_MSM_CAMSS_VFE_H */

> > diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c

> > index 97cea7c4d769..f282275af626 100644

> > --- a/drivers/media/platform/qcom/camss/camss-video.c

> > +++ b/drivers/media/platform/qcom/camss/camss-video.c

> > @@ -133,6 +133,55 @@ static const struct camss_format_info formats_rdi_8x96[] = {

> >         { { 1, 1 } }, { { 1, 1 } }, { 16 } },

> >   };

> >

> > +static const struct camss_format_info formats_rdi_845[] = {

> > +     { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },

> > +     { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },

> > +     { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },

> > +     { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },

> > +     { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },

> > +     { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },

> > +     { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },

> > +     { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },

> > +     { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },

> > +     { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },

> > +     { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },

> > +     { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },

> > +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },

> > +     { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },

> > +     { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },

> > +     { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },

> > +     { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },

> > +     { MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },

> > +     { MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },

> > +     { MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },

> > +     { MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },

> > +     { MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },

> > +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,

> > +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },

> > +};

> > +

> >   static const struct camss_format_info formats_pix_8x16[] = {

> >       { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,

> >         { { 1, 1 } }, { { 2, 3 } }, { 8 } },

> > @@ -960,6 +1009,9 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,

> >                       video->formats = formats_rdi_8x96;

> >                       video->nformats = ARRAY_SIZE(formats_rdi_8x96);

> >               }

> > +     }  else if (video->camss->version == CAMSS_845) {

> > +             video->formats = formats_rdi_845;

> > +             video->nformats = ARRAY_SIZE(formats_rdi_845);

> >       } else {

> >               ret = -EINVAL;

> >               goto error_video_register;

> > diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c

> > index 6c6f1e59ccd8..0e006def1996 100644

> > --- a/drivers/media/platform/qcom/camss/camss.c

> > +++ b/drivers/media/platform/qcom/camss/camss.c

> > @@ -465,6 +465,67 @@ static const struct resources vfe_res_660[] = {

> >       }

> >   };

> >

> > +static const struct resources vfe_res_845[] = {

> > +     /* VFE0 */

> > +     {

> > +             .regulator = { NULL },

> > +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",

> > +                             "soc_ahb", "vfe0", "vfe0_axi",

> > +                             "vfe0_src", "csi0",

> > +                             "csi0_src"},

> > +             .clock_rate = { { 0 },

> > +                             { 0 },

> > +                             { 80000000 },

> > +                             { 0 },

> > +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },

> > +                             { 0 },

> > +                             { 320000000 },

> > +                             { 19200000, 75000000, 384000000, 538666667 },

> > +                             { 384000000 } },

> > +             .reg = { "vfe0" },

> > +             .interrupt = { "vfe0" }

> > +     },

> > +

> > +     /* VFE1 */

> > +     {

> > +             .regulator = { NULL },

> > +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",

> > +                             "soc_ahb", "vfe1", "vfe1_axi",

> > +                             "vfe1_src", "csi1",

> > +                             "csi1_src"},

> > +             .clock_rate = { { 0 },

> > +                             { 0 },

> > +                             { 80000000 },

> > +                             { 0 },

> > +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },

> > +                             { 0 },

> > +                             { 320000000 },

> > +                             { 19200000, 75000000, 384000000, 538666667 },

> > +                             { 384000000 } },

> > +             .reg = { "vfe1" },

> > +             .interrupt = { "vfe1" }

> > +     },

> > +

> > +     /* VFE-lite */

> > +     {

> > +             .regulator = { NULL },

> > +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",

> > +                             "soc_ahb", "vfe_lite",

> > +                             "vfe_lite_src", "csi2",

> > +                             "csi2_src"},

> > +             .clock_rate = { { 0 },

> > +                             { 0 },

> > +                             { 80000000 },

> > +                             { 0 },

> > +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },

> > +                             { 320000000 },

> > +                             { 19200000, 75000000, 384000000, 538666667 },

> > +                             { 384000000 } },

> > +             .reg = { "vfe_lite" },

> > +             .interrupt = { "vfe_lite" }

> > +     }

> > +};

> > +

> >   /*

> >    * camss_add_clock_margin - Add margin to clock frequency rate

> >    * @rate: Clock frequency rate

> >
Andrey Konovalov Feb. 22, 2021, 5:06 p.m. UTC | #3 
Hi Robert,

On 22.02.2021 19:37, Robert Foss wrote:
> On Sat, 20 Feb 2021 at 22:40, Andrey Konovalov
> <andrey.konovalov@linaro.org> wrote:
>>
>> Hi Robert,
>>
>> Thank you for your patch!
>>
>> On 17.02.2021 14:21, Robert Foss wrote:
>>> Add register definitions for version 170 of the Titan architecture
>>> and implement support for the RDI output mode.
>>>
>>> The RDI mode as opposed to the PIX output mode for the VFE unit does
>>> not support any ISP functionality. This means essentially only
>>> supporting dumping the output of the whatever the CSI decoder receives
>>> from the sensor.
>>>
>>> For example will a sensor outputting YUV pixel format frames, only
>>> allow the VFE to dump those frames as they are received by the ISP
>>> to memory through the RDI interface.
>>>
>>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>>> ---
>>>
>>>
>>> Changes since v1:
>>>    - Andrey: Remove commented out chunk
>>>    - Remove left over WIP comments
>>>
>>> Changes since v4:
>>>    - Andrey: Remove traces of PIX support
>>>    - Andrey: Fix vfe_global_reset() overwriting reset command
>>>    - Remove unused variable
>>>
>>>
>>>
>>>    drivers/media/platform/qcom/camss/Makefile    |   1 +
>>>    .../media/platform/qcom/camss/camss-vfe-170.c | 790 ++++++++++++++++++
>>>    drivers/media/platform/qcom/camss/camss-vfe.c |  47 +-
>>>    drivers/media/platform/qcom/camss/camss-vfe.h |  26 +-
>>>    .../media/platform/qcom/camss/camss-video.c   |  52 ++
>>>    drivers/media/platform/qcom/camss/camss.c     |  61 ++
>>>    6 files changed, 957 insertions(+), 20 deletions(-)
>>>    create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c
>>>
>>> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
>>> index 940c0ae3e003..052c4f405fa3 100644
>>> --- a/drivers/media/platform/qcom/camss/Makefile
>>> +++ b/drivers/media/platform/qcom/camss/Makefile
>>> @@ -11,6 +11,7 @@ qcom-camss-objs += \
>>>                camss-vfe-4-1.o \
>>>                camss-vfe-4-7.o \
>>>                camss-vfe-4-8.o \
>>> +             camss-vfe-170.o \
>>>                camss-vfe-gen1.o \
>>>                camss-vfe.o \
>>>                camss-video.o \
>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
>>> new file mode 100644
>>> index 000000000000..c4991b1f22f8
>>> --- /dev/null
>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
>>> @@ -0,0 +1,790 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * camss-vfe-4-7.c
>>> + *
>>> + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7
>>> + *
>>> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
>>> + * Copyright (C) 2015-2018 Linaro Ltd.
>>
>> - it looks like the header comes from v4.7 without updating to Titan 170
> 
> Gotcha, thanks!
> 
>>
>>> + */
>>> +
>>> +#include <linux/delay.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/io.h>
>>> +#include <linux/iopoll.h>
>>> +
>>> +#include "camss.h"
>>> +#include "camss-vfe.h"
>>> +
>>> +#define VFE_HW_VERSION                               (0x000)
>>> +
>>> +#define VFE_GLOBAL_RESET_CMD                 (0x018)
>>> +#define              GLOBAL_RESET_CMD_CORE           BIT(0)
>>> +#define              GLOBAL_RESET_CMD_CAMIF          BIT(1)
>>> +#define              GLOBAL_RESET_CMD_BUS            BIT(2)
>>> +#define              GLOBAL_RESET_CMD_BUS_BDG        BIT(3)
>>> +#define              GLOBAL_RESET_CMD_REGISTER       BIT(4)
>>> +#define              GLOBAL_RESET_CMD_PM             BIT(5)
>>> +#define              GLOBAL_RESET_CMD_BUS_MISR       BIT(6)
>>> +#define              GLOBAL_RESET_CMD_TESTGEN        BIT(7)
>>> +#define              GLOBAL_RESET_CMD_DSP            BIT(8)
>>> +#define              GLOBAL_RESET_CMD_IDLE_CGC       BIT(9)
>>> +#define              GLOBAL_RESET_CMD_RDI0           BIT(10)
>>> +#define              GLOBAL_RESET_CMD_RDI1           BIT(11)
>>> +#define              GLOBAL_RESET_CMD_RDI2           BIT(12)
>>> +#define              GLOBAL_RESET_CMD_RDI3           BIT(13)
>>> +#define              GLOBAL_RESET_CMD_VFE_DOMAIN     BIT(30)
>>> +#define              GLOBAL_RESET_CMD_RESET_BYPASS   BIT(31)
>>> +
>>> +
>>> +#define VFE_CORE_CFG                         (0x050)
>>> +#define              CFG_PIXEL_PATTERN_YCBYCR        (0x4)
>>> +#define              CFG_PIXEL_PATTERN_YCRYCB        (0x5)
>>> +#define              CFG_PIXEL_PATTERN_CBYCRY        (0x6)
>>> +#define              CFG_PIXEL_PATTERN_CRYCBY        (0x7)
>>> +#define              CFG_COMPOSITE_REG_UPDATE_EN     BIT(4)
>>> +
>>> +#define VFE_IRQ_CMD                          (0x058)
>>> +#define              CMD_GLOBAL_CLEAR                BIT(0)
>>> +
>>> +#define VFE_IRQ_MASK_0                                       (0x05c)
>>> +#define              MASK_0_CAMIF_SOF                        BIT(0)
>>> +#define              MASK_0_CAMIF_EOF                        BIT(1)
>>> +#define              MASK_0_RDI_REG_UPDATE(n)                BIT((n) + 5)
>>> +#define              MASK_0_IMAGE_MASTER_n_PING_PONG(n)      BIT((n) + 8)
>>> +#define              MASK_0_IMAGE_COMPOSITE_DONE_n(n)        BIT((n) + 25)
>>> +#define              MASK_0_RESET_ACK                        BIT(31)
>>> +
>>> +#define VFE_IRQ_MASK_1                                       (0x060)
>>> +#define              MASK_1_CAMIF_ERROR                      BIT(0)
>>> +#define              MASK_1_VIOLATION                        BIT(7)
>>> +#define              MASK_1_BUS_BDG_HALT_ACK                 BIT(8)
>>> +#define              MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n)   BIT((n) + 9)
>>> +#define              MASK_1_RDI_SOF(n)                       BIT((n) + 29)
>>> +
>>> +#define VFE_IRQ_CLEAR_0                                      (0x064)
>>> +#define VFE_IRQ_CLEAR_1                                      (0x068)
>>> +
>>> +#define VFE_IRQ_STATUS_0                             (0x06c)
>>> +#define              STATUS_0_CAMIF_SOF                      BIT(0)
>>> +#define              STATUS_0_RDI_REG_UPDATE(n)              BIT((n) + 5)
>>> +#define              STATUS_0_IMAGE_MASTER_PING_PONG(n)      BIT((n) + 8)
>>> +#define              STATUS_0_IMAGE_COMPOSITE_DONE(n)        BIT((n) + 25)
>>> +#define              STATUS_0_RESET_ACK                      BIT(31)
>>> +
>>> +#define VFE_IRQ_STATUS_1                             (0x070)
>>> +#define              STATUS_1_VIOLATION                      BIT(7)
>>> +#define              STATUS_1_BUS_BDG_HALT_ACK               BIT(8)
>>> +#define              STATUS_1_RDI_SOF(n)                     BIT((n) + 27)
>>> +
>>> +#define VFE_VIOLATION_STATUS                 (0x07c)
>>> +
>>> +#define VFE_CAMIF_CMD                                (0x478)
>>> +#define              CMD_CLEAR_CAMIF_STATUS          BIT(2)
>>> +
>>> +#define VFE_CAMIF_CFG                                (0x47c)
>>> +#define              CFG_VSYNC_SYNC_EDGE             (0)
>>> +#define                      VSYNC_ACTIVE_HIGH       (0)
>>> +#define                      VSYNC_ACTIVE_LOW        (1)
>>> +#define              CFG_HSYNC_SYNC_EDGE             (1)
>>> +#define                      HSYNC_ACTIVE_HIGH       (0)
>>> +#define                      HSYNC_ACTIVE_LOW        (1)
>>> +#define              CFG_VFE_SUBSAMPLE_ENABLE        BIT(4)
>>> +#define              CFG_BUS_SUBSAMPLE_ENABLE        BIT(5)
>>> +#define              CFG_VFE_OUTPUT_EN               BIT(6)
>>> +#define              CFG_BUS_OUTPUT_EN               BIT(7)
>>> +#define              CFG_BINNING_EN                  BIT(9)
>>> +#define              CFG_FRAME_BASED_EN              BIT(10)
>>> +#define              CFG_RAW_CROP_EN                 BIT(22)
>>> +
>>> +// XXX different, don't exist in TITAN register docs
>>> +#define VFE_0_CAMIF_FRAME_CFG                        0x484
>>> +#define VFE_0_CAMIF_WINDOW_WIDTH_CFG         0x488
>>> +#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG                0x48c
>>> +#define VFE_0_CAMIF_SUBSAMPLE_CFG            0x490
>>> +#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN    0x498
>>> +#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN    0x49c
>>> +#define VFE_0_CAMIF_STATUS                   0x4a4
>>> +#define VFE_0_CAMIF_STATUS_HALT                      BIT(31)
>>> +#define CAMIF_TIMEOUT_SLEEP_US 1000
>>> +#define CAMIF_TIMEOUT_ALL_US 1000000
>>> +
>>> +#define VFE_REG_UPDATE_CMD                   (0x4ac)
>>> +#define              REG_UPDATE_RDI(n)               BIT(1 + (n))
>>> +
>>> +
>>> +#define VFE_BUS_IRQ_MASK(n)          (0x2044 + (n) * 4)
>>> +#define VFE_BUS_IRQ_CLEAR(n)         (0x2050 + (n) * 4)
>>> +
>>> +#define VFE_BUS_IRQ_STATUS(n)                (0x205c + (n) * 4)
>>> +#define              STATUS0_COMP_RESET_DONE         BIT(0)
>>> +#define              STATUS0_COMP_REG_UPDATE0_DONE   BIT(1)
>>> +#define              STATUS0_COMP_REG_UPDATE1_DONE   BIT(2)
>>> +#define              STATUS0_COMP_REG_UPDATE2_DONE   BIT(3)
>>> +#define              STATUS0_COMP_REG_UPDATE3_DONE   BIT(4)
>>> +#define              STATUS0_COMP_REG_UPDATE_DONE(n) BIT(n + 1)
>>> +#define              STATUS0_COMP0_BUF_DONE          BIT(5)
>>> +#define              STATUS0_COMP1_BUF_DONE          BIT(6)
>>> +#define              STATUS0_COMP2_BUF_DONE          BIT(7)
>>> +#define              STATUS0_COMP3_BUF_DONE          BIT(8)
>>> +#define              STATUS0_COMP4_BUF_DONE          BIT(9)
>>> +#define              STATUS0_COMP5_BUF_DONE          BIT(10)
>>> +#define              STATUS0_COMP_BUF_DONE(n)        BIT(n + 5)
>>> +#define              STATUS0_COMP_ERROR              BIT(11)
>>> +#define              STATUS0_COMP_OVERWRITE          BIT(12)
>>> +#define              STATUS0_OVERFLOW                BIT(13)
>>> +#define              STATUS0_VIOLATION               BIT(14)
>>> +/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */
>>> +#define              STATUS1_WM_CLIENT_BUF_DONE(n)           BIT(n)
>>> +#define              STATUS1_EARLY_DONE                      BIT(24)
>>> +#define              STATUS2_DUAL_COMP0_BUF_DONE             BIT(0)
>>> +#define              STATUS2_DUAL_COMP1_BUF_DONE             BIT(1)
>>> +#define              STATUS2_DUAL_COMP2_BUF_DONE             BIT(2)
>>> +#define              STATUS2_DUAL_COMP3_BUF_DONE             BIT(3)
>>> +#define              STATUS2_DUAL_COMP4_BUF_DONE             BIT(4)
>>> +#define              STATUS2_DUAL_COMP5_BUF_DONE             BIT(5)
>>> +#define              STATUS2_DUAL_COMP_BUF_DONE(n)           BIT(n)
>>> +#define              STATUS2_DUAL_COMP_ERROR                 BIT(6)
>>> +#define              STATUS2_DUAL_COMP_OVERWRITE             BIT(7)
>>> +
>>> +#define VFE_BUS_IRQ_CLEAR_GLOBAL             (0x2068)
>>> +
>>> +#define VFE_BUS_WM_DEBUG_STATUS_CFG          (0x226c)
>>> +#define              DEBUG_STATUS_CFG_STATUS0(n)     BIT(n)
>>> +#define              DEBUG_STATUS_CFG_STATUS1(n)     BIT(8+n)
>>> +
>>> +#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER    (0x2080)
>>> +
>>> +#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC         (0x2084)
>>> +#define              BUS_VER2_MAX_CLIENTS (24)
>>> +#define              WM_ADDR_NO_SYNC_DEFAULT_VAL \
>>> +                             ((1 << BUS_VER2_MAX_CLIENTS) - 1)
>>> +
>>> +#define VFE_BUS_WM_CGC_OVERRIDE                      (0x200c)
>>> +#define              WM_CGC_OVERRIDE_ALL             (0xFFFFF)
>>> +
>>> +#define VFE_BUS_WM_TEST_BUS_CTRL             (0x211c)
>>> +
>>> +#define VFE_BUS_WM_STATUS0(n)                        (0x2200 + (n) * 0x100)
>>> +#define VFE_BUS_WM_STATUS1(n)                        (0x2204 + (n) * 0x100)
>>> +#define VFE_BUS_WM_CFG(n)                    (0x2208 + (n) * 0x100)
>>> +#define              WM_CFG_EN                       (0)
>>> +#define              WM_CFG_MODE                     (1)
>>> +#define                      MODE_QCOM_PLAIN (0)
>>> +#define                      MODE_MIPI_RAW   (1)
>>> +#define              WM_CFG_VIRTUALFRAME             (2)
>>> +#define VFE_BUS_WM_HEADER_ADDR(n)            (0x220c + (n) * 0x100)
>>> +#define VFE_BUS_WM_HEADER_CFG(n)             (0x2210 + (n) * 0x100)
>>> +#define VFE_BUS_WM_IMAGE_ADDR(n)             (0x2214 + (n) * 0x100)
>>> +#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n)              (0x2218 + (n) * 0x100)
>>> +#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n)               (0x221c + (n) * 0x100)
>>> +#define              WM_BUFFER_DEFAULT_WIDTH         (0xFF01)
>>> +
>>> +#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n)              (0x2220 + (n) * 0x100)
>>> +#define VFE_BUS_WM_PACKER_CFG(n)             (0x2224 + (n) * 0x100)
>>> +
>>> +#define VFE_BUS_WM_STRIDE(n)                 (0x2228 + (n) * 0x100)
>>> +#define              WM_STRIDE_DEFAULT_STRIDE        (0xFF01)
>>> +
>>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)   (0x2248 + (n) * 0x100)
>>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)  (0x224c + (n) * 0x100)
>>> +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)               (0x2250 + (n) * 0x100)
>>> +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)              (0x2254 + (n) * 0x100)
>>> +#define VFE_BUS_WM_FRAME_INC(n)                      (0x2258 + (n) * 0x100)
>>> +#define VFE_BUS_WM_BURST_LIMIT(n)            (0x225c + (n) * 0x100)
>>> +
>>> +
>>> +static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
>>> +{
>>> +     u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
>>> +
>>> +     u32 gen = (hw_version >> 28) & 0xF;
>>> +     u32 rev = (hw_version >> 16) & 0xFFF;
>>> +     u32 step = hw_version & 0xFFFF;
>>> +
>>> +     dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
>>> +}
>>> +
>>> +static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
>>> +{
>>> +     u32 bits = readl_relaxed(vfe->base + reg);
>>> +
>>> +     writel_relaxed(bits & ~clr_bits, vfe->base + reg);
>>> +}
>>> +
>>> +static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
>>> +{
>>> +     u32 bits = readl_relaxed(vfe->base + reg);
>>> +
>>> +     writel_relaxed(bits | set_bits, vfe->base + reg);
>>> +}
>>> +
>>> +static void vfe_global_reset(struct vfe_device *vfe)
>>> +{
>>> +     u32 reset_bits = GLOBAL_RESET_CMD_CORE          |
>>> +                      GLOBAL_RESET_CMD_CAMIF         |
>>> +                      GLOBAL_RESET_CMD_BUS           |
>>> +                      GLOBAL_RESET_CMD_REGISTER      |
>>> +                      GLOBAL_RESET_CMD_PM            |
>>> +                      GLOBAL_RESET_CMD_BUS_MISR      |
>>> +                      GLOBAL_RESET_CMD_IDLE_CGC      |
>>> +                      GLOBAL_RESET_CMD_RDI0          |
>>> +                      GLOBAL_RESET_CMD_RDI1          |
>>> +                      GLOBAL_RESET_CMD_RDI2;
>>
>> - so the reset_bits is set to 0x00001E77 in v5.
>>
>> In v4 the reset_bits was set to 0x00003F9F which corresponds to:
>>
>>          GLOBAL_RESET_CMD_CORE           |
>>          GLOBAL_RESET_CMD_CAMIF          |
>>          GLOBAL_RESET_CMD_BUS            |
>>          GLOBAL_RESET_CMD_BUS_BDG        |
>>          GLOBAL_RESET_CMD_REGISTER       |
>>          GLOBAL_RESET_CMD_TESTGEN        |
>>          GLOBAL_RESET_CMD_DSP            |
>>          GLOBAL_RESET_CMD_IDLE_CGC       |
>>          GLOBAL_RESET_CMD_RDI0           |
>>          GLOBAL_RESET_CMD_RDI1           |
>>          GLOBAL_RESET_CMD_RDI2           |
>>          GLOBAL_RESET_CMD_RDI3;
>>
>> So the difference between v4 and v5 is:
>>
>> reset in v4, not reset in v5:
>>          GLOBAL_RESET_CMD_BUS_BDG
>>          GLOBAL_RESET_CMD_TESTGEN
>>          GLOBAL_RESET_CMD_DSP
>>
>> reset in v5, not reset in v4:
>>          GLOBAL_RESET_CMD_PM
>>          GLOBAL_RESET_CMD_BUS_MISR
>>
>> - correct?
>>
>>     It is probably worth a few words in the v4 vs v5 changelog.
>>
>>     (dropping GLOBAL_RESET_CMD_RDI3 in v5 is clear - Titan 170 has only RDI0 to RDI2
>>     according to the driver code)
>>
> 
> Great catch! I made a mistake with the bit-ordering after doing a
> hex->binary translation.
> I'll straighten this out in v6.
> 
>>> +
>>> +     writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);
>>> +
>>> +     /* Make sure IRQ mask has been written before resetting */
>>> +     wmb();
>>> +
>>> +     writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);
>>> +}
>>> +
>>> +static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
>>> +{
>>> +     u32 val;
>>> +
>>> +     /*Set Debug Registers*/
>>> +     val = DEBUG_STATUS_CFG_STATUS0(1) |
>>> +           DEBUG_STATUS_CFG_STATUS0(7);
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);
>>> +
>>> +     /* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */
>>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);
>>> +
>>> +     /* no clock gating at bus input */
>>> +     val = WM_CGC_OVERRIDE_ALL;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
>>> +
>>> +     writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
>>> +
>>> +     /* if addr_no_sync has default value then config the addr no sync reg */
>>> +     val = WM_ADDR_NO_SYNC_DEFAULT_VAL;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);
>>> +
>>> +     writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
>>> +
>>> +     val = WM_BUFFER_DEFAULT_WIDTH;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));
>>> +
>>> +     val = 0;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));
>>> +
>>> +     val = 0;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
>>> +
>>> +     /* Configure stride for RDIs */
>>> +     //val = pix->plane_fmt[0].bytesperline;
>>> +     val = WM_STRIDE_DEFAULT_STRIDE;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
>>> +
>>> +     /* Enable WM */
>>> +     val = 1 << WM_CFG_EN |
>>> +           MODE_MIPI_RAW << WM_CFG_MODE;
>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));
>>> +}
>>> +
>>> +static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
>>> +{
>>> +     /* Disable WM */
>>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
>>> +}
>>> +
>>> +static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
>>> +                       struct vfe_line *line)
>>> +{
>>> +     struct v4l2_pix_format_mplane *pix =
>>> +             &line->video_out.active_fmt.fmt.pix_mp;
>>> +     u32 stride = pix->plane_fmt[0].bytesperline;
>>> +
>>> +     writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
>>> +     writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));
>>> +}
>>> +
>>> +static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
>>> +{
>>> +     vfe->reg_update |= REG_UPDATE_RDI(line_id);
>>> +
>>> +     /* Enforce ordering between previous reg writes and reg update */
>>> +     wmb();
>>> +
>>> +     writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
>>> +
>>> +     /* Enforce ordering between reg update and subsequent reg writes */
>>> +     wmb();
>>> +}
>>> +
>>> +static inline void vfe_reg_update_clear(struct vfe_device *vfe,
>>> +                                     enum vfe_line_id line_id)
>>> +{
>>> +     vfe->reg_update &= ~REG_UPDATE_RDI(line_id);
>>> +}
>>> +
>>> +static void vfe_enable_irq_common(struct vfe_device *vfe)
>>> +{
>>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
>>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
>>> +
>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
>>
>> Looking at the #defines in the beginning of this file, only part
>> of the IRQ sources (not the whole 32 per each register) are used
>> or defined.
>>
>> Is it safe to unmask the unused (reserved?) bits in the above 5
>> IRQ mask registers?
> 
> Unfortunately this register is not defined at all in any documentation
> of the downstream[1] kernel, so I think the situation is actually a
> bit worse than what you've pointed out here.
> I'd like to remove the register defines above since I don't have a
> reliable source for them. But I would like to keep the register writes
> just as they are since that seems to work.
> 
> What are your thoughts?

Without having the documentation, using the known good writes is fine.
Removing the unused defines is also good.

Thanks,
Andrey

> [1] https://git.linaro.org/people/robert.foss/linux.git/log/?h=msm_sdm845
> 
>>
>>> +}
>>> +
>>> +static void vfe_isr_halt_ack(struct vfe_device *vfe)
>>> +{
>>> +     complete(&vfe->halt_complete);
>>> +}
>>> +
>>> +static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
>>> +{
>>> +     *status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
>>> +     *status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
>>> +
>>> +     writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
>>> +     writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
>>> +
>>> +     /* Enforce ordering between IRQ Clear and Global IRQ Clear */
>>> +     wmb();
>>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
>>> +}
>>> +
>>> +static void vfe_violation_read(struct vfe_device *vfe)
>>> +{
>>> +     u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
>>> +
>>> +     pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr - VFE module interrupt handler
>>> + * @irq: Interrupt line
>>> + * @dev: VFE device
>>> + *
>>> + * Return IRQ_HANDLED on success
>>> + */
>>> +static irqreturn_t vfe_isr(int irq, void *dev)
>>> +{
>>> +     struct vfe_device *vfe = dev;
>>> +     u32 status0, status1, vfe_bus_status[3];
>>> +     int i, wm;
>>> +
>>> +     status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
>>> +     status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
>>> +
>>> +     writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);
>>> +     writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);
>>> +
>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {
>>> +             vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));
>>> +             writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));
>>> +     }
>>> +
>>> +     /* Enforce ordering between IRQ reading and interpretation */
>>> +     wmb();
>>> +
>>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
>>> +     writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
>>> +
>>> +     if (status0 & STATUS_0_RESET_ACK)
>>> +             vfe->isr_ops.reset_ack(vfe);
>>> +
>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
>>> +             if (status0 & STATUS_0_RDI_REG_UPDATE(i))
>>> +                     vfe->isr_ops.reg_update(vfe, i);
>>> +
>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
>>> +             if (status0 & STATUS_1_RDI_SOF(i))
>>> +                     vfe->isr_ops.sof(vfe, i);
>>> +
>>> +     for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
>>> +             if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
>>> +                     vfe->isr_ops.comp_done(vfe, i);
>>> +
>>> +     for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)
>>> +             if (status0 & BIT(9))
>>> +                     if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))
>>> +                             vfe->isr_ops.wm_done(vfe, wm);
>>> +
>>> +     return IRQ_HANDLED;
>>> +}
>>> +
>>> +/*
>>> + * vfe_halt - Trigger halt on VFE module and wait to complete
>>> + * @vfe: VFE device
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_halt(struct vfe_device *vfe)
>>> +{
>>> +     unsigned long time;
>>> +
>>> +     return 0;
>>> +
>>> +     reinit_completion(&vfe->halt_complete);
>>> +
>>> +     time = wait_for_completion_timeout(&vfe->halt_complete,
>>> +             msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
>>> +     if (!time) {
>>> +             dev_err(vfe->camss->dev, "VFE halt timeout\n");
>>> +             return -EIO;
>>> +     }
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static int vfe_get_output(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +     int i;
>>> +     int wm_idx;
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     output = &line->output;
>>> +     if (output->state != VFE_OUTPUT_OFF) {
>>> +             dev_err(vfe->camss->dev, "Output is running\n");
>>> +             goto error;
>>> +     }
>>> +
>>> +     output->wm_num = 1;
>>> +
>>> +     for (i = 0; i < output->wm_num; i++) {
>>
>> - this for loop can now be omitted ("for (i = 0; i < 1; i++)" is just one pass) ...
> 
> Ack.
> 
>>
>>> +             wm_idx = vfe_reserve_wm(vfe, line->id);
>>> +             if (wm_idx < 0) {
>>> +                     dev_err(vfe->camss->dev, "Can not reserve wm\n");
>>> +                     goto error_get_wm;
>>> +             }
>>> +             output->wm_idx[i] = wm_idx;
>>> +     }
>>> +
>>> +     output->drop_update_idx = 0;
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +
>>> +error_get_wm:
>>> +     for (i--; i >= 0; i--)
>>
>> - ... and this one too. And the "i" local var is no longer needed.
> 
> Ack
> 
>>
>> Thanks,
>> Andrey
>>
>>> +             vfe_release_wm(vfe, output->wm_idx[i]);
>>> +     output->state = VFE_OUTPUT_OFF;
>>> +error:
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return -EINVAL;
>>> +}
>>> +
>>> +static int vfe_enable_output(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output = &line->output;
>>> +     const struct vfe_hw_ops *ops = vfe->ops;
>>> +     struct media_entity *sensor;
>>> +     unsigned long flags;
>>> +     unsigned int frame_skip = 0;
>>> +     unsigned int i;
>>> +
>>> +     sensor = camss_find_sensor(&line->subdev.entity);
>>> +     if (sensor) {
>>> +             struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
>>> +
>>> +             v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
>>> +             /* Max frame skip is 29 frames */
>>> +             if (frame_skip > VFE_FRAME_DROP_VAL - 1)
>>> +                     frame_skip = VFE_FRAME_DROP_VAL - 1;
>>> +     }
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     ops->reg_update_clear(vfe, line->id);
>>> +
>>> +     if (output->state != VFE_OUTPUT_OFF) {
>>> +             dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
>>> +                     output->state);
>>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +             return -EINVAL;
>>> +     }
>>> +
>>> +     WARN_ON(output->gen2.active_num);
>>> +
>>> +     output->state = VFE_OUTPUT_ON;
>>> +
>>> +     output->sequence = 0;
>>> +     output->wait_reg_update = 0;
>>> +     reinit_completion(&output->reg_update);
>>> +
>>> +     vfe_wm_start(vfe, output->wm_idx[0], line);
>>> +
>>> +     for (i = 0; i < 2; i++) {
>>> +             output->buf[i] = vfe_buf_get_pending(output);
>>> +             if (!output->buf[i])
>>> +                     break;
>>> +             output->gen2.active_num++;
>>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
>>> +     }
>>> +
>>> +     ops->reg_update(vfe, line->id);
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +static int vfe_disable_output(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output = &line->output;
>>> +     unsigned long flags;
>>> +     unsigned int i;
>>> +     bool done;
>>> +     int timeout = 0;
>>> +
>>> +     do {
>>> +             spin_lock_irqsave(&vfe->output_lock, flags);
>>> +             done = !output->gen2.active_num;
>>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +             usleep_range(10000, 20000);
>>> +
>>> +             if (timeout++ == 100) {
>>> +                     dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
>>> +                     vfe_reset(vfe);
>>> +                     output->gen2.active_num = 0;
>>> +                     return 0;
>>> +             }
>>> +     } while (!done);
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +     for (i = 0; i < output->wm_num; i++)
>>> +             vfe_wm_stop(vfe, output->wm_idx[i]);
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +/*
>>> + * vfe_enable - Enable streaming on VFE line
>>> + * @line: VFE line
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_enable(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     int ret;
>>> +
>>> +     mutex_lock(&vfe->stream_lock);
>>> +
>>> +     if (!vfe->stream_count)
>>> +             vfe_enable_irq_common(vfe);
>>> +
>>> +     vfe->stream_count++;
>>> +
>>> +     mutex_unlock(&vfe->stream_lock);
>>> +
>>> +     ret = vfe_get_output(line);
>>> +     if (ret < 0)
>>> +             goto error_get_output;
>>> +
>>> +     ret = vfe_enable_output(line);
>>> +     if (ret < 0)
>>> +             goto error_enable_output;
>>> +
>>> +     vfe->was_streaming = 1;
>>> +
>>> +     return 0;
>>> +
>>> +
>>> +error_enable_output:
>>> +     vfe_put_output(line);
>>> +
>>> +error_get_output:
>>> +     mutex_lock(&vfe->stream_lock);
>>> +
>>> +     vfe->stream_count--;
>>> +
>>> +     mutex_unlock(&vfe->stream_lock);
>>> +
>>> +     return ret;
>>> +}
>>> +
>>> +/*
>>> + * vfe_disable - Disable streaming on VFE line
>>> + * @line: VFE line
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_disable(struct vfe_line *line)
>>> +{
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +
>>> +     vfe_disable_output(line);
>>> +
>>> +     vfe_put_output(line);
>>> +
>>> +     mutex_lock(&vfe->stream_lock);
>>> +
>>> +     vfe->stream_count--;
>>> +
>>> +     mutex_unlock(&vfe->stream_lock);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr_sof - Process start of frame interrupt
>>> + * @vfe: VFE Device
>>> + * @line_id: VFE line
>>> + */
>>> +static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
>>> +{
>>> +
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr_reg_update - Process reg update interrupt
>>> + * @vfe: VFE Device
>>> + * @line_id: VFE line
>>> + */
>>> +static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
>>> +{
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +     vfe->ops->reg_update_clear(vfe, line_id);
>>> +
>>> +     output = &vfe->line[line_id].output;
>>> +
>>> +     if (output->wait_reg_update) {
>>> +             output->wait_reg_update = 0;
>>> +             complete(&output->reg_update);
>>> +     }
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +}
>>> +
>>> +/*
>>> + * vfe_isr_wm_done - Process write master done interrupt
>>> + * @vfe: VFE Device
>>> + * @wm: Write master id
>>> + */
>>> +static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
>>> +{
>>> +     struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
>>> +     struct camss_buffer *ready_buf;
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +     u32 index;
>>> +     u64 ts = ktime_get_ns();
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
>>> +             dev_err_ratelimited(vfe->camss->dev,
>>> +                                 "Received wm done for unmapped index\n");
>>> +             goto out_unlock;
>>> +     }
>>> +     output = &vfe->line[vfe->wm_output_map[wm]].output;
>>> +
>>> +     ready_buf = output->buf[0];
>>> +     if (!ready_buf) {
>>> +             dev_err_ratelimited(vfe->camss->dev,
>>> +                                 "Missing ready buf %d!\n", output->state);
>>> +             goto out_unlock;
>>> +     }
>>> +
>>> +     ready_buf->vb.vb2_buf.timestamp = ts;
>>> +     ready_buf->vb.sequence = output->sequence++;
>>> +
>>> +     index = 0;
>>> +     output->buf[0] = output->buf[1];
>>> +     if (output->buf[0])
>>> +             index = 1;
>>> +
>>> +     output->buf[index] = vfe_buf_get_pending(output);
>>> +
>>> +     if (output->buf[index])
>>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
>>> +     else
>>> +             output->gen2.active_num--;
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
>>> +
>>> +     return;
>>> +
>>> +out_unlock:
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +}
>>> +
>>> +/*
>>> + * vfe_queue_buffer - Add empty buffer
>>> + * @vid: Video device structure
>>> + * @buf: Buffer to be enqueued
>>> + *
>>> + * Add an empty buffer - depending on the current number of buffers it will be
>>> + * put in pending buffer queue or directly given to the hardware to be filled.
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +static int vfe_queue_buffer(struct camss_video *vid,
>>> +                         struct camss_buffer *buf)
>>> +{
>>> +     struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
>>> +     struct vfe_device *vfe = to_vfe(line);
>>> +     struct vfe_output *output;
>>> +     unsigned long flags;
>>> +
>>> +     output = &line->output;
>>> +
>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>> +
>>> +     if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
>>> +             output->buf[output->gen2.active_num++] = buf;
>>> +             vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
>>> +     } else {
>>> +             vfe_buf_add_pending(output, buf);
>>> +     }
>>> +
>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>> +
>>> +     return 0;
>>> +}
>>> +
>>> +const struct vfe_isr_ops vfe_isr_ops_170 = {
>>> +     .reset_ack = vfe_isr_reset_ack,
>>> +     .halt_ack = vfe_isr_halt_ack,
>>> +     .reg_update = vfe_isr_reg_update,
>>> +     .sof = vfe_isr_sof,
>>> +     .comp_done = vfe_isr_comp_done,
>>> +     .wm_done = vfe_isr_wm_done,
>>> +};
>>> +
>>> +static const struct camss_video_ops vfe_video_ops_170 = {
>>> +     .queue_buffer = vfe_queue_buffer,
>>> +     .flush_buffers = vfe_flush_buffers,
>>> +};
>>> +
>>> +static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
>>> +{
>>> +     vfe->isr_ops = vfe_isr_ops_170;
>>> +     vfe->video_ops = vfe_video_ops_170;
>>> +
>>> +     vfe->line_num = VFE_LINE_NUM_GEN2;
>>> +}
>>> +
>>> +const struct vfe_hw_ops vfe_ops_170 = {
>>> +     .global_reset = vfe_global_reset,
>>> +     .hw_version_read = vfe_hw_version_read,
>>> +     .isr_read = vfe_isr_read,
>>> +     .isr = vfe_isr,
>>> +     .reg_update_clear = vfe_reg_update_clear,
>>> +     .reg_update = vfe_reg_update,
>>> +     .subdev_init = vfe_subdev_init,
>>> +     .vfe_disable = vfe_disable,
>>> +     .vfe_enable = vfe_enable,
>>> +     .vfe_halt = vfe_halt,
>>> +     .violation_read = vfe_violation_read,
>>> +};
>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
>>> index 375843bd16af..6fafeb8a5484 100644
>>> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
>>> @@ -96,6 +96,32 @@ static const struct vfe_format formats_pix_8x96[] = {
>>>        { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
>>>    };
>>>
>>> +static const struct vfe_format formats_rdi_845[] = {
>>> +     { MEDIA_BUS_FMT_UYVY8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_VYUY8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_YUYV8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
>>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
>>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },
>>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
>>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
>>> +     { MEDIA_BUS_FMT_Y10_1X10, 10 },
>>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
>>> +};
>>> +
>>>    /*
>>>     * vfe_get_bpp - map media bus format to bits per pixel
>>>     * @formats: supported media bus formats array
>>> @@ -192,7 +218,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>>>                        return sink_code;
>>>                }
>>>        else if (vfe->camss->version == CAMSS_8x96 ||
>>> -              vfe->camss->version == CAMSS_660)
>>> +              vfe->camss->version == CAMSS_660 ||
>>> +              vfe->camss->version == CAMSS_845)
>>>                switch (sink_code) {
>>>                case MEDIA_BUS_FMT_YUYV8_2X8:
>>>                {
>>> @@ -256,13 +283,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>>>                return 0;
>>>    }
>>>
>>> -/*
>>> - * vfe_reset - Trigger reset on VFE module and wait to complete
>>> - * @vfe: VFE device
>>> - *
>>> - * Return 0 on success or a negative error code otherwise
>>> - */
>>> -static int vfe_reset(struct vfe_device *vfe)
>>> +int vfe_reset(struct vfe_device *vfe)
>>>    {
>>>        unsigned long time;
>>>
>>> @@ -429,7 +450,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
>>>                struct camss_clock *clock = &vfe->clock[i];
>>>
>>>                if (!strcmp(clock->name, "vfe0") ||
>>> -                 !strcmp(clock->name, "vfe1")) {
>>> +                 !strcmp(clock->name, "vfe1") ||
>>> +                 !strcmp(clock->name, "vfe_lite")) {
>>>                        u64 min_rate = 0;
>>>                        long rate;
>>>
>>> @@ -1268,6 +1290,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>>>        case CAMSS_660:
>>>                vfe->ops = &vfe_ops_4_8;
>>>                break;
>>> +
>>> +     case CAMSS_845:
>>> +             vfe->ops = &vfe_ops_170;
>>> +             break;
>>>        default:
>>>                return -EINVAL;
>>>        }
>>> @@ -1379,6 +1405,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>>>                                l->formats = formats_rdi_8x96;
>>>                                l->nformats = ARRAY_SIZE(formats_rdi_8x96);
>>>                        }
>>> +             } else if (camss->version == CAMSS_845) {
>>> +                     l->formats = formats_rdi_845;
>>> +                     l->nformats = ARRAY_SIZE(formats_rdi_845);
>>>                } else {
>>>                        return -EINVAL;
>>>                }
>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
>>> index aad5dc74c2c0..29b3d930ffc6 100644
>>> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
>>> @@ -19,7 +19,6 @@
>>>    #include "camss-video.h"
>>>    #include "camss-vfe-gen1.h"
>>>
>>> -
>>>    #define MSM_VFE_PAD_SINK 0
>>>    #define MSM_VFE_PAD_SRC 1
>>>    #define MSM_VFE_PADS_NUM 2
>>> @@ -38,14 +37,14 @@
>>>    #define to_vfe(ptr_line)    \
>>>        container_of(vfe_line_array(ptr_line), struct vfe_device, line)
>>>
>>> -
>>>    enum vfe_output_state {
>>>        VFE_OUTPUT_OFF,
>>>        VFE_OUTPUT_RESERVED,
>>>        VFE_OUTPUT_SINGLE,
>>>        VFE_OUTPUT_CONTINUOUS,
>>>        VFE_OUTPUT_IDLE,
>>> -     VFE_OUTPUT_STOPPING
>>> +     VFE_OUTPUT_STOPPING,
>>> +     VFE_OUTPUT_ON,
>>>    };
>>>
>>>    enum vfe_line_id {
>>> @@ -53,6 +52,7 @@ enum vfe_line_id {
>>>        VFE_LINE_RDI0 = 0,
>>>        VFE_LINE_RDI1 = 1,
>>>        VFE_LINE_RDI2 = 2,
>>> +     VFE_LINE_NUM_GEN2 = 3,
>>>        VFE_LINE_PIX = 3,
>>>        VFE_LINE_NUM_GEN1 = 4,
>>>        VFE_LINE_NUM_MAX = 4
>>> @@ -73,6 +73,9 @@ struct vfe_output {
>>>                        int active_buf;
>>>                        int wait_sof;
>>>                } gen1;
>>> +             struct {
>>> +                     int active_num;
>>> +             } gen2;
>>>        };
>>>        enum vfe_output_state state;
>>>        unsigned int sequence;
>>> @@ -171,14 +174,6 @@ void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)
>>>
>>>    struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
>>>
>>> -/*
>>> - * vfe_disable - Disable streaming on VFE line
>>> - * @line: VFE line
>>> - *
>>> - * Return 0 on success or a negative error code otherwise
>>> - */
>>> -int vfe_disable(struct vfe_line *line);
>>> -
>>>    int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
>>>
>>>    /*
>>> @@ -193,8 +188,17 @@ int vfe_put_output(struct vfe_line *line);
>>>    int vfe_release_wm(struct vfe_device *vfe, u8 wm);
>>>    int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
>>>
>>> +/*
>>> + * vfe_reset - Trigger reset on VFE module and wait to complete
>>> + * @vfe: VFE device
>>> + *
>>> + * Return 0 on success or a negative error code otherwise
>>> + */
>>> +int vfe_reset(struct vfe_device *vfe);
>>> +
>>>    extern const struct vfe_hw_ops vfe_ops_4_1;
>>>    extern const struct vfe_hw_ops vfe_ops_4_7;
>>>    extern const struct vfe_hw_ops vfe_ops_4_8;
>>> +extern const struct vfe_hw_ops vfe_ops_170;
>>>
>>>    #endif /* QC_MSM_CAMSS_VFE_H */
>>> diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
>>> index 97cea7c4d769..f282275af626 100644
>>> --- a/drivers/media/platform/qcom/camss/camss-video.c
>>> +++ b/drivers/media/platform/qcom/camss/camss-video.c
>>> @@ -133,6 +133,55 @@ static const struct camss_format_info formats_rdi_8x96[] = {
>>>          { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>    };
>>>
>>> +static const struct camss_format_info formats_rdi_845[] = {
>>> +     { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>> +     { MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>> +};
>>> +
>>>    static const struct camss_format_info formats_pix_8x16[] = {
>>>        { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
>>>          { { 1, 1 } }, { { 2, 3 } }, { 8 } },
>>> @@ -960,6 +1009,9 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
>>>                        video->formats = formats_rdi_8x96;
>>>                        video->nformats = ARRAY_SIZE(formats_rdi_8x96);
>>>                }
>>> +     }  else if (video->camss->version == CAMSS_845) {
>>> +             video->formats = formats_rdi_845;
>>> +             video->nformats = ARRAY_SIZE(formats_rdi_845);
>>>        } else {
>>>                ret = -EINVAL;
>>>                goto error_video_register;
>>> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
>>> index 6c6f1e59ccd8..0e006def1996 100644
>>> --- a/drivers/media/platform/qcom/camss/camss.c
>>> +++ b/drivers/media/platform/qcom/camss/camss.c
>>> @@ -465,6 +465,67 @@ static const struct resources vfe_res_660[] = {
>>>        }
>>>    };
>>>
>>> +static const struct resources vfe_res_845[] = {
>>> +     /* VFE0 */
>>> +     {
>>> +             .regulator = { NULL },
>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>> +                             "soc_ahb", "vfe0", "vfe0_axi",
>>> +                             "vfe0_src", "csi0",
>>> +                             "csi0_src"},
>>> +             .clock_rate = { { 0 },
>>> +                             { 0 },
>>> +                             { 80000000 },
>>> +                             { 0 },
>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>> +                             { 0 },
>>> +                             { 320000000 },
>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>> +                             { 384000000 } },
>>> +             .reg = { "vfe0" },
>>> +             .interrupt = { "vfe0" }
>>> +     },
>>> +
>>> +     /* VFE1 */
>>> +     {
>>> +             .regulator = { NULL },
>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>> +                             "soc_ahb", "vfe1", "vfe1_axi",
>>> +                             "vfe1_src", "csi1",
>>> +                             "csi1_src"},
>>> +             .clock_rate = { { 0 },
>>> +                             { 0 },
>>> +                             { 80000000 },
>>> +                             { 0 },
>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>> +                             { 0 },
>>> +                             { 320000000 },
>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>> +                             { 384000000 } },
>>> +             .reg = { "vfe1" },
>>> +             .interrupt = { "vfe1" }
>>> +     },
>>> +
>>> +     /* VFE-lite */
>>> +     {
>>> +             .regulator = { NULL },
>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>> +                             "soc_ahb", "vfe_lite",
>>> +                             "vfe_lite_src", "csi2",
>>> +                             "csi2_src"},
>>> +             .clock_rate = { { 0 },
>>> +                             { 0 },
>>> +                             { 80000000 },
>>> +                             { 0 },
>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>> +                             { 320000000 },
>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>> +                             { 384000000 } },
>>> +             .reg = { "vfe_lite" },
>>> +             .interrupt = { "vfe_lite" }
>>> +     }
>>> +};
>>> +
>>>    /*
>>>     * camss_add_clock_margin - Add margin to clock frequency rate
>>>     * @rate: Clock frequency rate
>>>
Robert Foss Feb. 22, 2021, 5:21 p.m. UTC | #4 
On Mon, 22 Feb 2021 at 18:06, Andrey Konovalov
<andrey.konovalov@linaro.org> wrote:
>
> Hi Robert,
>
> On 22.02.2021 19:37, Robert Foss wrote:
> > On Sat, 20 Feb 2021 at 22:40, Andrey Konovalov
> > <andrey.konovalov@linaro.org> wrote:
> >>
> >> Hi Robert,
> >>
> >> Thank you for your patch!
> >>
> >> On 17.02.2021 14:21, Robert Foss wrote:
> >>> Add register definitions for version 170 of the Titan architecture
> >>> and implement support for the RDI output mode.
> >>>
> >>> The RDI mode as opposed to the PIX output mode for the VFE unit does
> >>> not support any ISP functionality. This means essentially only
> >>> supporting dumping the output of the whatever the CSI decoder receives
> >>> from the sensor.
> >>>
> >>> For example will a sensor outputting YUV pixel format frames, only
> >>> allow the VFE to dump those frames as they are received by the ISP
> >>> to memory through the RDI interface.
> >>>
> >>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> >>> ---
> >>>
> >>>
> >>> Changes since v1:
> >>>    - Andrey: Remove commented out chunk
> >>>    - Remove left over WIP comments
> >>>
> >>> Changes since v4:
> >>>    - Andrey: Remove traces of PIX support
> >>>    - Andrey: Fix vfe_global_reset() overwriting reset command
> >>>    - Remove unused variable
> >>>
> >>>
> >>>
> >>>    drivers/media/platform/qcom/camss/Makefile    |   1 +
> >>>    .../media/platform/qcom/camss/camss-vfe-170.c | 790 ++++++++++++++++++
> >>>    drivers/media/platform/qcom/camss/camss-vfe.c |  47 +-
> >>>    drivers/media/platform/qcom/camss/camss-vfe.h |  26 +-
> >>>    .../media/platform/qcom/camss/camss-video.c   |  52 ++
> >>>    drivers/media/platform/qcom/camss/camss.c     |  61 ++
> >>>    6 files changed, 957 insertions(+), 20 deletions(-)
> >>>    create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c
> >>>
> >>> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
> >>> index 940c0ae3e003..052c4f405fa3 100644
> >>> --- a/drivers/media/platform/qcom/camss/Makefile
> >>> +++ b/drivers/media/platform/qcom/camss/Makefile
> >>> @@ -11,6 +11,7 @@ qcom-camss-objs += \
> >>>                camss-vfe-4-1.o \
> >>>                camss-vfe-4-7.o \
> >>>                camss-vfe-4-8.o \
> >>> +             camss-vfe-170.o \
> >>>                camss-vfe-gen1.o \
> >>>                camss-vfe.o \
> >>>                camss-video.o \
> >>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
> >>> new file mode 100644
> >>> index 000000000000..c4991b1f22f8
> >>> --- /dev/null
> >>> +++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
> >>> @@ -0,0 +1,790 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +/*
> >>> + * camss-vfe-4-7.c
> >>> + *
> >>> + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7
> >>> + *
> >>> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
> >>> + * Copyright (C) 2015-2018 Linaro Ltd.
> >>
> >> - it looks like the header comes from v4.7 without updating to Titan 170
> >
> > Gotcha, thanks!
> >
> >>
> >>> + */
> >>> +
> >>> +#include <linux/delay.h>
> >>> +#include <linux/interrupt.h>
> >>> +#include <linux/io.h>
> >>> +#include <linux/iopoll.h>
> >>> +
> >>> +#include "camss.h"
> >>> +#include "camss-vfe.h"
> >>> +
> >>> +#define VFE_HW_VERSION                               (0x000)
> >>> +
> >>> +#define VFE_GLOBAL_RESET_CMD                 (0x018)
> >>> +#define              GLOBAL_RESET_CMD_CORE           BIT(0)
> >>> +#define              GLOBAL_RESET_CMD_CAMIF          BIT(1)
> >>> +#define              GLOBAL_RESET_CMD_BUS            BIT(2)
> >>> +#define              GLOBAL_RESET_CMD_BUS_BDG        BIT(3)
> >>> +#define              GLOBAL_RESET_CMD_REGISTER       BIT(4)
> >>> +#define              GLOBAL_RESET_CMD_PM             BIT(5)
> >>> +#define              GLOBAL_RESET_CMD_BUS_MISR       BIT(6)
> >>> +#define              GLOBAL_RESET_CMD_TESTGEN        BIT(7)
> >>> +#define              GLOBAL_RESET_CMD_DSP            BIT(8)
> >>> +#define              GLOBAL_RESET_CMD_IDLE_CGC       BIT(9)
> >>> +#define              GLOBAL_RESET_CMD_RDI0           BIT(10)
> >>> +#define              GLOBAL_RESET_CMD_RDI1           BIT(11)
> >>> +#define              GLOBAL_RESET_CMD_RDI2           BIT(12)
> >>> +#define              GLOBAL_RESET_CMD_RDI3           BIT(13)
> >>> +#define              GLOBAL_RESET_CMD_VFE_DOMAIN     BIT(30)
> >>> +#define              GLOBAL_RESET_CMD_RESET_BYPASS   BIT(31)
> >>> +
> >>> +
> >>> +#define VFE_CORE_CFG                         (0x050)
> >>> +#define              CFG_PIXEL_PATTERN_YCBYCR        (0x4)
> >>> +#define              CFG_PIXEL_PATTERN_YCRYCB        (0x5)
> >>> +#define              CFG_PIXEL_PATTERN_CBYCRY        (0x6)
> >>> +#define              CFG_PIXEL_PATTERN_CRYCBY        (0x7)
> >>> +#define              CFG_COMPOSITE_REG_UPDATE_EN     BIT(4)
> >>> +
> >>> +#define VFE_IRQ_CMD                          (0x058)
> >>> +#define              CMD_GLOBAL_CLEAR                BIT(0)
> >>> +
> >>> +#define VFE_IRQ_MASK_0                                       (0x05c)
> >>> +#define              MASK_0_CAMIF_SOF                        BIT(0)
> >>> +#define              MASK_0_CAMIF_EOF                        BIT(1)
> >>> +#define              MASK_0_RDI_REG_UPDATE(n)                BIT((n) + 5)
> >>> +#define              MASK_0_IMAGE_MASTER_n_PING_PONG(n)      BIT((n) + 8)
> >>> +#define              MASK_0_IMAGE_COMPOSITE_DONE_n(n)        BIT((n) + 25)
> >>> +#define              MASK_0_RESET_ACK                        BIT(31)
> >>> +
> >>> +#define VFE_IRQ_MASK_1                                       (0x060)
> >>> +#define              MASK_1_CAMIF_ERROR                      BIT(0)
> >>> +#define              MASK_1_VIOLATION                        BIT(7)
> >>> +#define              MASK_1_BUS_BDG_HALT_ACK                 BIT(8)
> >>> +#define              MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n)   BIT((n) + 9)
> >>> +#define              MASK_1_RDI_SOF(n)                       BIT((n) + 29)
> >>> +
> >>> +#define VFE_IRQ_CLEAR_0                                      (0x064)
> >>> +#define VFE_IRQ_CLEAR_1                                      (0x068)
> >>> +
> >>> +#define VFE_IRQ_STATUS_0                             (0x06c)
> >>> +#define              STATUS_0_CAMIF_SOF                      BIT(0)
> >>> +#define              STATUS_0_RDI_REG_UPDATE(n)              BIT((n) + 5)
> >>> +#define              STATUS_0_IMAGE_MASTER_PING_PONG(n)      BIT((n) + 8)
> >>> +#define              STATUS_0_IMAGE_COMPOSITE_DONE(n)        BIT((n) + 25)
> >>> +#define              STATUS_0_RESET_ACK                      BIT(31)
> >>> +
> >>> +#define VFE_IRQ_STATUS_1                             (0x070)
> >>> +#define              STATUS_1_VIOLATION                      BIT(7)
> >>> +#define              STATUS_1_BUS_BDG_HALT_ACK               BIT(8)
> >>> +#define              STATUS_1_RDI_SOF(n)                     BIT((n) + 27)
> >>> +
> >>> +#define VFE_VIOLATION_STATUS                 (0x07c)
> >>> +
> >>> +#define VFE_CAMIF_CMD                                (0x478)
> >>> +#define              CMD_CLEAR_CAMIF_STATUS          BIT(2)
> >>> +
> >>> +#define VFE_CAMIF_CFG                                (0x47c)
> >>> +#define              CFG_VSYNC_SYNC_EDGE             (0)
> >>> +#define                      VSYNC_ACTIVE_HIGH       (0)
> >>> +#define                      VSYNC_ACTIVE_LOW        (1)
> >>> +#define              CFG_HSYNC_SYNC_EDGE             (1)
> >>> +#define                      HSYNC_ACTIVE_HIGH       (0)
> >>> +#define                      HSYNC_ACTIVE_LOW        (1)
> >>> +#define              CFG_VFE_SUBSAMPLE_ENABLE        BIT(4)
> >>> +#define              CFG_BUS_SUBSAMPLE_ENABLE        BIT(5)
> >>> +#define              CFG_VFE_OUTPUT_EN               BIT(6)
> >>> +#define              CFG_BUS_OUTPUT_EN               BIT(7)
> >>> +#define              CFG_BINNING_EN                  BIT(9)
> >>> +#define              CFG_FRAME_BASED_EN              BIT(10)
> >>> +#define              CFG_RAW_CROP_EN                 BIT(22)
> >>> +
> >>> +// XXX different, don't exist in TITAN register docs
> >>> +#define VFE_0_CAMIF_FRAME_CFG                        0x484
> >>> +#define VFE_0_CAMIF_WINDOW_WIDTH_CFG         0x488
> >>> +#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG                0x48c
> >>> +#define VFE_0_CAMIF_SUBSAMPLE_CFG            0x490
> >>> +#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN    0x498
> >>> +#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN    0x49c
> >>> +#define VFE_0_CAMIF_STATUS                   0x4a4
> >>> +#define VFE_0_CAMIF_STATUS_HALT                      BIT(31)
> >>> +#define CAMIF_TIMEOUT_SLEEP_US 1000
> >>> +#define CAMIF_TIMEOUT_ALL_US 1000000
> >>> +
> >>> +#define VFE_REG_UPDATE_CMD                   (0x4ac)
> >>> +#define              REG_UPDATE_RDI(n)               BIT(1 + (n))
> >>> +
> >>> +
> >>> +#define VFE_BUS_IRQ_MASK(n)          (0x2044 + (n) * 4)
> >>> +#define VFE_BUS_IRQ_CLEAR(n)         (0x2050 + (n) * 4)
> >>> +
> >>> +#define VFE_BUS_IRQ_STATUS(n)                (0x205c + (n) * 4)
> >>> +#define              STATUS0_COMP_RESET_DONE         BIT(0)
> >>> +#define              STATUS0_COMP_REG_UPDATE0_DONE   BIT(1)
> >>> +#define              STATUS0_COMP_REG_UPDATE1_DONE   BIT(2)
> >>> +#define              STATUS0_COMP_REG_UPDATE2_DONE   BIT(3)
> >>> +#define              STATUS0_COMP_REG_UPDATE3_DONE   BIT(4)
> >>> +#define              STATUS0_COMP_REG_UPDATE_DONE(n) BIT(n + 1)
> >>> +#define              STATUS0_COMP0_BUF_DONE          BIT(5)
> >>> +#define              STATUS0_COMP1_BUF_DONE          BIT(6)
> >>> +#define              STATUS0_COMP2_BUF_DONE          BIT(7)
> >>> +#define              STATUS0_COMP3_BUF_DONE          BIT(8)
> >>> +#define              STATUS0_COMP4_BUF_DONE          BIT(9)
> >>> +#define              STATUS0_COMP5_BUF_DONE          BIT(10)
> >>> +#define              STATUS0_COMP_BUF_DONE(n)        BIT(n + 5)
> >>> +#define              STATUS0_COMP_ERROR              BIT(11)
> >>> +#define              STATUS0_COMP_OVERWRITE          BIT(12)
> >>> +#define              STATUS0_OVERFLOW                BIT(13)
> >>> +#define              STATUS0_VIOLATION               BIT(14)
> >>> +/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */
> >>> +#define              STATUS1_WM_CLIENT_BUF_DONE(n)           BIT(n)
> >>> +#define              STATUS1_EARLY_DONE                      BIT(24)
> >>> +#define              STATUS2_DUAL_COMP0_BUF_DONE             BIT(0)
> >>> +#define              STATUS2_DUAL_COMP1_BUF_DONE             BIT(1)
> >>> +#define              STATUS2_DUAL_COMP2_BUF_DONE             BIT(2)
> >>> +#define              STATUS2_DUAL_COMP3_BUF_DONE             BIT(3)
> >>> +#define              STATUS2_DUAL_COMP4_BUF_DONE             BIT(4)
> >>> +#define              STATUS2_DUAL_COMP5_BUF_DONE             BIT(5)
> >>> +#define              STATUS2_DUAL_COMP_BUF_DONE(n)           BIT(n)
> >>> +#define              STATUS2_DUAL_COMP_ERROR                 BIT(6)
> >>> +#define              STATUS2_DUAL_COMP_OVERWRITE             BIT(7)
> >>> +
> >>> +#define VFE_BUS_IRQ_CLEAR_GLOBAL             (0x2068)
> >>> +
> >>> +#define VFE_BUS_WM_DEBUG_STATUS_CFG          (0x226c)
> >>> +#define              DEBUG_STATUS_CFG_STATUS0(n)     BIT(n)
> >>> +#define              DEBUG_STATUS_CFG_STATUS1(n)     BIT(8+n)
> >>> +
> >>> +#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER    (0x2080)
> >>> +
> >>> +#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC         (0x2084)
> >>> +#define              BUS_VER2_MAX_CLIENTS (24)
> >>> +#define              WM_ADDR_NO_SYNC_DEFAULT_VAL \
> >>> +                             ((1 << BUS_VER2_MAX_CLIENTS) - 1)
> >>> +
> >>> +#define VFE_BUS_WM_CGC_OVERRIDE                      (0x200c)
> >>> +#define              WM_CGC_OVERRIDE_ALL             (0xFFFFF)
> >>> +
> >>> +#define VFE_BUS_WM_TEST_BUS_CTRL             (0x211c)
> >>> +
> >>> +#define VFE_BUS_WM_STATUS0(n)                        (0x2200 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_STATUS1(n)                        (0x2204 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_CFG(n)                    (0x2208 + (n) * 0x100)
> >>> +#define              WM_CFG_EN                       (0)
> >>> +#define              WM_CFG_MODE                     (1)
> >>> +#define                      MODE_QCOM_PLAIN (0)
> >>> +#define                      MODE_MIPI_RAW   (1)
> >>> +#define              WM_CFG_VIRTUALFRAME             (2)
> >>> +#define VFE_BUS_WM_HEADER_ADDR(n)            (0x220c + (n) * 0x100)
> >>> +#define VFE_BUS_WM_HEADER_CFG(n)             (0x2210 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_IMAGE_ADDR(n)             (0x2214 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n)              (0x2218 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n)               (0x221c + (n) * 0x100)
> >>> +#define              WM_BUFFER_DEFAULT_WIDTH         (0xFF01)
> >>> +
> >>> +#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n)              (0x2220 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_PACKER_CFG(n)             (0x2224 + (n) * 0x100)
> >>> +
> >>> +#define VFE_BUS_WM_STRIDE(n)                 (0x2228 + (n) * 0x100)
> >>> +#define              WM_STRIDE_DEFAULT_STRIDE        (0xFF01)
> >>> +
> >>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)   (0x2248 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)  (0x224c + (n) * 0x100)
> >>> +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)               (0x2250 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)              (0x2254 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_FRAME_INC(n)                      (0x2258 + (n) * 0x100)
> >>> +#define VFE_BUS_WM_BURST_LIMIT(n)            (0x225c + (n) * 0x100)
> >>> +
> >>> +
> >>> +static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
> >>> +{
> >>> +     u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
> >>> +
> >>> +     u32 gen = (hw_version >> 28) & 0xF;
> >>> +     u32 rev = (hw_version >> 16) & 0xFFF;
> >>> +     u32 step = hw_version & 0xFFFF;
> >>> +
> >>> +     dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
> >>> +}
> >>> +
> >>> +static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
> >>> +{
> >>> +     u32 bits = readl_relaxed(vfe->base + reg);
> >>> +
> >>> +     writel_relaxed(bits & ~clr_bits, vfe->base + reg);
> >>> +}
> >>> +
> >>> +static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
> >>> +{
> >>> +     u32 bits = readl_relaxed(vfe->base + reg);
> >>> +
> >>> +     writel_relaxed(bits | set_bits, vfe->base + reg);
> >>> +}
> >>> +
> >>> +static void vfe_global_reset(struct vfe_device *vfe)
> >>> +{
> >>> +     u32 reset_bits = GLOBAL_RESET_CMD_CORE          |
> >>> +                      GLOBAL_RESET_CMD_CAMIF         |
> >>> +                      GLOBAL_RESET_CMD_BUS           |
> >>> +                      GLOBAL_RESET_CMD_REGISTER      |
> >>> +                      GLOBAL_RESET_CMD_PM            |
> >>> +                      GLOBAL_RESET_CMD_BUS_MISR      |
> >>> +                      GLOBAL_RESET_CMD_IDLE_CGC      |
> >>> +                      GLOBAL_RESET_CMD_RDI0          |
> >>> +                      GLOBAL_RESET_CMD_RDI1          |
> >>> +                      GLOBAL_RESET_CMD_RDI2;
> >>
> >> - so the reset_bits is set to 0x00001E77 in v5.
> >>
> >> In v4 the reset_bits was set to 0x00003F9F which corresponds to:
> >>
> >>          GLOBAL_RESET_CMD_CORE           |
> >>          GLOBAL_RESET_CMD_CAMIF          |
> >>          GLOBAL_RESET_CMD_BUS            |
> >>          GLOBAL_RESET_CMD_BUS_BDG        |
> >>          GLOBAL_RESET_CMD_REGISTER       |
> >>          GLOBAL_RESET_CMD_TESTGEN        |
> >>          GLOBAL_RESET_CMD_DSP            |
> >>          GLOBAL_RESET_CMD_IDLE_CGC       |
> >>          GLOBAL_RESET_CMD_RDI0           |
> >>          GLOBAL_RESET_CMD_RDI1           |
> >>          GLOBAL_RESET_CMD_RDI2           |
> >>          GLOBAL_RESET_CMD_RDI3;
> >>
> >> So the difference between v4 and v5 is:
> >>
> >> reset in v4, not reset in v5:
> >>          GLOBAL_RESET_CMD_BUS_BDG
> >>          GLOBAL_RESET_CMD_TESTGEN
> >>          GLOBAL_RESET_CMD_DSP
> >>
> >> reset in v5, not reset in v4:
> >>          GLOBAL_RESET_CMD_PM
> >>          GLOBAL_RESET_CMD_BUS_MISR
> >>
> >> - correct?
> >>
> >>     It is probably worth a few words in the v4 vs v5 changelog.
> >>
> >>     (dropping GLOBAL_RESET_CMD_RDI3 in v5 is clear - Titan 170 has only RDI0 to RDI2
> >>     according to the driver code)
> >>
> >
> > Great catch! I made a mistake with the bit-ordering after doing a
> > hex->binary translation.
> > I'll straighten this out in v6.
> >
> >>> +
> >>> +     writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);
> >>> +
> >>> +     /* Make sure IRQ mask has been written before resetting */
> >>> +     wmb();
> >>> +
> >>> +     writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);
> >>> +}
> >>> +
> >>> +static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
> >>> +{
> >>> +     u32 val;
> >>> +
> >>> +     /*Set Debug Registers*/
> >>> +     val = DEBUG_STATUS_CFG_STATUS0(1) |
> >>> +           DEBUG_STATUS_CFG_STATUS0(7);
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);
> >>> +
> >>> +     /* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */
> >>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);
> >>> +
> >>> +     /* no clock gating at bus input */
> >>> +     val = WM_CGC_OVERRIDE_ALL;
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
> >>> +
> >>> +     writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
> >>> +
> >>> +     /* if addr_no_sync has default value then config the addr no sync reg */
> >>> +     val = WM_ADDR_NO_SYNC_DEFAULT_VAL;
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);
> >>> +
> >>> +     writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
> >>> +
> >>> +     val = WM_BUFFER_DEFAULT_WIDTH;
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));
> >>> +
> >>> +     val = 0;
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));
> >>> +
> >>> +     val = 0;
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
> >>> +
> >>> +     /* Configure stride for RDIs */
> >>> +     //val = pix->plane_fmt[0].bytesperline;
> >>> +     val = WM_STRIDE_DEFAULT_STRIDE;
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
> >>> +
> >>> +     /* Enable WM */
> >>> +     val = 1 << WM_CFG_EN |
> >>> +           MODE_MIPI_RAW << WM_CFG_MODE;
> >>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));
> >>> +}
> >>> +
> >>> +static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
> >>> +{
> >>> +     /* Disable WM */
> >>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
> >>> +}
> >>> +
> >>> +static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
> >>> +                       struct vfe_line *line)
> >>> +{
> >>> +     struct v4l2_pix_format_mplane *pix =
> >>> +             &line->video_out.active_fmt.fmt.pix_mp;
> >>> +     u32 stride = pix->plane_fmt[0].bytesperline;
> >>> +
> >>> +     writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
> >>> +     writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));
> >>> +}
> >>> +
> >>> +static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
> >>> +{
> >>> +     vfe->reg_update |= REG_UPDATE_RDI(line_id);
> >>> +
> >>> +     /* Enforce ordering between previous reg writes and reg update */
> >>> +     wmb();
> >>> +
> >>> +     writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
> >>> +
> >>> +     /* Enforce ordering between reg update and subsequent reg writes */
> >>> +     wmb();
> >>> +}
> >>> +
> >>> +static inline void vfe_reg_update_clear(struct vfe_device *vfe,
> >>> +                                     enum vfe_line_id line_id)
> >>> +{
> >>> +     vfe->reg_update &= ~REG_UPDATE_RDI(line_id);
> >>> +}
> >>> +
> >>> +static void vfe_enable_irq_common(struct vfe_device *vfe)
> >>> +{
> >>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
> >>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
> >>> +
> >>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
> >>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
> >>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
> >>
> >> Looking at the #defines in the beginning of this file, only part
> >> of the IRQ sources (not the whole 32 per each register) are used
> >> or defined.
> >>
> >> Is it safe to unmask the unused (reserved?) bits in the above 5
> >> IRQ mask registers?
> >
> > Unfortunately this register is not defined at all in any documentation
> > of the downstream[1] kernel, so I think the situation is actually a
> > bit worse than what you've pointed out here.
> > I'd like to remove the register defines above since I don't have a
> > reliable source for them. But I would like to keep the register writes
> > just as they are since that seems to work.
> >
> > What are your thoughts?
>
> Without having the documentation, using the known good writes is fine.
> Removing the unused defines is also good.

Some of the register definitions like STATUS0_COMP_BUF_DONE is used
currently, and are documented for later generations of this hardware.
But I'm not finding any traces for this generation. Chances are that
they are the same, but I cant guarantee it. But at least some of them
seem to be correct, and are indeed needed. I'm tempted to leave this
exactly the way it is. Would that be ok for you?

>
> Thanks,
> Andrey
>
> > [1] https://git.linaro.org/people/robert.foss/linux.git/log/?h=msm_sdm845
> >
> >>
> >>> +}
> >>> +
> >>> +static void vfe_isr_halt_ack(struct vfe_device *vfe)
> >>> +{
> >>> +     complete(&vfe->halt_complete);
> >>> +}
> >>> +
> >>> +static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
> >>> +{
> >>> +     *status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
> >>> +     *status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
> >>> +
> >>> +     writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
> >>> +     writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
> >>> +
> >>> +     /* Enforce ordering between IRQ Clear and Global IRQ Clear */
> >>> +     wmb();
> >>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
> >>> +}
> >>> +
> >>> +static void vfe_violation_read(struct vfe_device *vfe)
> >>> +{
> >>> +     u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
> >>> +
> >>> +     pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_isr - VFE module interrupt handler
> >>> + * @irq: Interrupt line
> >>> + * @dev: VFE device
> >>> + *
> >>> + * Return IRQ_HANDLED on success
> >>> + */
> >>> +static irqreturn_t vfe_isr(int irq, void *dev)
> >>> +{
> >>> +     struct vfe_device *vfe = dev;
> >>> +     u32 status0, status1, vfe_bus_status[3];
> >>> +     int i, wm;
> >>> +
> >>> +     status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
> >>> +     status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
> >>> +
> >>> +     writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);
> >>> +     writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);
> >>> +
> >>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {
> >>> +             vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));
> >>> +             writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));
> >>> +     }
> >>> +
> >>> +     /* Enforce ordering between IRQ reading and interpretation */
> >>> +     wmb();
> >>> +
> >>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
> >>> +     writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
> >>> +
> >>> +     if (status0 & STATUS_0_RESET_ACK)
> >>> +             vfe->isr_ops.reset_ack(vfe);
> >>> +
> >>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
> >>> +             if (status0 & STATUS_0_RDI_REG_UPDATE(i))
> >>> +                     vfe->isr_ops.reg_update(vfe, i);
> >>> +
> >>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
> >>> +             if (status0 & STATUS_1_RDI_SOF(i))
> >>> +                     vfe->isr_ops.sof(vfe, i);
> >>> +
> >>> +     for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
> >>> +             if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
> >>> +                     vfe->isr_ops.comp_done(vfe, i);
> >>> +
> >>> +     for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)
> >>> +             if (status0 & BIT(9))
> >>> +                     if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))
> >>> +                             vfe->isr_ops.wm_done(vfe, wm);
> >>> +
> >>> +     return IRQ_HANDLED;
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_halt - Trigger halt on VFE module and wait to complete
> >>> + * @vfe: VFE device
> >>> + *
> >>> + * Return 0 on success or a negative error code otherwise
> >>> + */
> >>> +static int vfe_halt(struct vfe_device *vfe)
> >>> +{
> >>> +     unsigned long time;
> >>> +
> >>> +     return 0;
> >>> +
> >>> +     reinit_completion(&vfe->halt_complete);
> >>> +
> >>> +     time = wait_for_completion_timeout(&vfe->halt_complete,
> >>> +             msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
> >>> +     if (!time) {
> >>> +             dev_err(vfe->camss->dev, "VFE halt timeout\n");
> >>> +             return -EIO;
> >>> +     }
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static int vfe_get_output(struct vfe_line *line)
> >>> +{
> >>> +     struct vfe_device *vfe = to_vfe(line);
> >>> +     struct vfe_output *output;
> >>> +     unsigned long flags;
> >>> +     int i;
> >>> +     int wm_idx;
> >>> +
> >>> +     spin_lock_irqsave(&vfe->output_lock, flags);
> >>> +
> >>> +     output = &line->output;
> >>> +     if (output->state != VFE_OUTPUT_OFF) {
> >>> +             dev_err(vfe->camss->dev, "Output is running\n");
> >>> +             goto error;
> >>> +     }
> >>> +
> >>> +     output->wm_num = 1;
> >>> +
> >>> +     for (i = 0; i < output->wm_num; i++) {
> >>
> >> - this for loop can now be omitted ("for (i = 0; i < 1; i++)" is just one pass) ...
> >
> > Ack.
> >
> >>
> >>> +             wm_idx = vfe_reserve_wm(vfe, line->id);
> >>> +             if (wm_idx < 0) {
> >>> +                     dev_err(vfe->camss->dev, "Can not reserve wm\n");
> >>> +                     goto error_get_wm;
> >>> +             }
> >>> +             output->wm_idx[i] = wm_idx;
> >>> +     }
> >>> +
> >>> +     output->drop_update_idx = 0;
> >>> +
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +
> >>> +     return 0;
> >>> +
> >>> +error_get_wm:
> >>> +     for (i--; i >= 0; i--)
> >>
> >> - ... and this one too. And the "i" local var is no longer needed.
> >
> > Ack
> >
> >>
> >> Thanks,
> >> Andrey
> >>
> >>> +             vfe_release_wm(vfe, output->wm_idx[i]);
> >>> +     output->state = VFE_OUTPUT_OFF;
> >>> +error:
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +
> >>> +     return -EINVAL;
> >>> +}
> >>> +
> >>> +static int vfe_enable_output(struct vfe_line *line)
> >>> +{
> >>> +     struct vfe_device *vfe = to_vfe(line);
> >>> +     struct vfe_output *output = &line->output;
> >>> +     const struct vfe_hw_ops *ops = vfe->ops;
> >>> +     struct media_entity *sensor;
> >>> +     unsigned long flags;
> >>> +     unsigned int frame_skip = 0;
> >>> +     unsigned int i;
> >>> +
> >>> +     sensor = camss_find_sensor(&line->subdev.entity);
> >>> +     if (sensor) {
> >>> +             struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
> >>> +
> >>> +             v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
> >>> +             /* Max frame skip is 29 frames */
> >>> +             if (frame_skip > VFE_FRAME_DROP_VAL - 1)
> >>> +                     frame_skip = VFE_FRAME_DROP_VAL - 1;
> >>> +     }
> >>> +
> >>> +     spin_lock_irqsave(&vfe->output_lock, flags);
> >>> +
> >>> +     ops->reg_update_clear(vfe, line->id);
> >>> +
> >>> +     if (output->state != VFE_OUTPUT_OFF) {
> >>> +             dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
> >>> +                     output->state);
> >>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +             return -EINVAL;
> >>> +     }
> >>> +
> >>> +     WARN_ON(output->gen2.active_num);
> >>> +
> >>> +     output->state = VFE_OUTPUT_ON;
> >>> +
> >>> +     output->sequence = 0;
> >>> +     output->wait_reg_update = 0;
> >>> +     reinit_completion(&output->reg_update);
> >>> +
> >>> +     vfe_wm_start(vfe, output->wm_idx[0], line);
> >>> +
> >>> +     for (i = 0; i < 2; i++) {
> >>> +             output->buf[i] = vfe_buf_get_pending(output);
> >>> +             if (!output->buf[i])
> >>> +                     break;
> >>> +             output->gen2.active_num++;
> >>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
> >>> +     }
> >>> +
> >>> +     ops->reg_update(vfe, line->id);
> >>> +
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static int vfe_disable_output(struct vfe_line *line)
> >>> +{
> >>> +     struct vfe_device *vfe = to_vfe(line);
> >>> +     struct vfe_output *output = &line->output;
> >>> +     unsigned long flags;
> >>> +     unsigned int i;
> >>> +     bool done;
> >>> +     int timeout = 0;
> >>> +
> >>> +     do {
> >>> +             spin_lock_irqsave(&vfe->output_lock, flags);
> >>> +             done = !output->gen2.active_num;
> >>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +             usleep_range(10000, 20000);
> >>> +
> >>> +             if (timeout++ == 100) {
> >>> +                     dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
> >>> +                     vfe_reset(vfe);
> >>> +                     output->gen2.active_num = 0;
> >>> +                     return 0;
> >>> +             }
> >>> +     } while (!done);
> >>> +
> >>> +     spin_lock_irqsave(&vfe->output_lock, flags);
> >>> +     for (i = 0; i < output->wm_num; i++)
> >>> +             vfe_wm_stop(vfe, output->wm_idx[i]);
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_enable - Enable streaming on VFE line
> >>> + * @line: VFE line
> >>> + *
> >>> + * Return 0 on success or a negative error code otherwise
> >>> + */
> >>> +static int vfe_enable(struct vfe_line *line)
> >>> +{
> >>> +     struct vfe_device *vfe = to_vfe(line);
> >>> +     int ret;
> >>> +
> >>> +     mutex_lock(&vfe->stream_lock);
> >>> +
> >>> +     if (!vfe->stream_count)
> >>> +             vfe_enable_irq_common(vfe);
> >>> +
> >>> +     vfe->stream_count++;
> >>> +
> >>> +     mutex_unlock(&vfe->stream_lock);
> >>> +
> >>> +     ret = vfe_get_output(line);
> >>> +     if (ret < 0)
> >>> +             goto error_get_output;
> >>> +
> >>> +     ret = vfe_enable_output(line);
> >>> +     if (ret < 0)
> >>> +             goto error_enable_output;
> >>> +
> >>> +     vfe->was_streaming = 1;
> >>> +
> >>> +     return 0;
> >>> +
> >>> +
> >>> +error_enable_output:
> >>> +     vfe_put_output(line);
> >>> +
> >>> +error_get_output:
> >>> +     mutex_lock(&vfe->stream_lock);
> >>> +
> >>> +     vfe->stream_count--;
> >>> +
> >>> +     mutex_unlock(&vfe->stream_lock);
> >>> +
> >>> +     return ret;
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_disable - Disable streaming on VFE line
> >>> + * @line: VFE line
> >>> + *
> >>> + * Return 0 on success or a negative error code otherwise
> >>> + */
> >>> +static int vfe_disable(struct vfe_line *line)
> >>> +{
> >>> +     struct vfe_device *vfe = to_vfe(line);
> >>> +
> >>> +     vfe_disable_output(line);
> >>> +
> >>> +     vfe_put_output(line);
> >>> +
> >>> +     mutex_lock(&vfe->stream_lock);
> >>> +
> >>> +     vfe->stream_count--;
> >>> +
> >>> +     mutex_unlock(&vfe->stream_lock);
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_isr_sof - Process start of frame interrupt
> >>> + * @vfe: VFE Device
> >>> + * @line_id: VFE line
> >>> + */
> >>> +static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
> >>> +{
> >>> +
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_isr_reg_update - Process reg update interrupt
> >>> + * @vfe: VFE Device
> >>> + * @line_id: VFE line
> >>> + */
> >>> +static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
> >>> +{
> >>> +     struct vfe_output *output;
> >>> +     unsigned long flags;
> >>> +
> >>> +     spin_lock_irqsave(&vfe->output_lock, flags);
> >>> +     vfe->ops->reg_update_clear(vfe, line_id);
> >>> +
> >>> +     output = &vfe->line[line_id].output;
> >>> +
> >>> +     if (output->wait_reg_update) {
> >>> +             output->wait_reg_update = 0;
> >>> +             complete(&output->reg_update);
> >>> +     }
> >>> +
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_isr_wm_done - Process write master done interrupt
> >>> + * @vfe: VFE Device
> >>> + * @wm: Write master id
> >>> + */
> >>> +static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
> >>> +{
> >>> +     struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
> >>> +     struct camss_buffer *ready_buf;
> >>> +     struct vfe_output *output;
> >>> +     unsigned long flags;
> >>> +     u32 index;
> >>> +     u64 ts = ktime_get_ns();
> >>> +
> >>> +     spin_lock_irqsave(&vfe->output_lock, flags);
> >>> +
> >>> +     if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
> >>> +             dev_err_ratelimited(vfe->camss->dev,
> >>> +                                 "Received wm done for unmapped index\n");
> >>> +             goto out_unlock;
> >>> +     }
> >>> +     output = &vfe->line[vfe->wm_output_map[wm]].output;
> >>> +
> >>> +     ready_buf = output->buf[0];
> >>> +     if (!ready_buf) {
> >>> +             dev_err_ratelimited(vfe->camss->dev,
> >>> +                                 "Missing ready buf %d!\n", output->state);
> >>> +             goto out_unlock;
> >>> +     }
> >>> +
> >>> +     ready_buf->vb.vb2_buf.timestamp = ts;
> >>> +     ready_buf->vb.sequence = output->sequence++;
> >>> +
> >>> +     index = 0;
> >>> +     output->buf[0] = output->buf[1];
> >>> +     if (output->buf[0])
> >>> +             index = 1;
> >>> +
> >>> +     output->buf[index] = vfe_buf_get_pending(output);
> >>> +
> >>> +     if (output->buf[index])
> >>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
> >>> +     else
> >>> +             output->gen2.active_num--;
> >>> +
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +
> >>> +     vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
> >>> +
> >>> +     return;
> >>> +
> >>> +out_unlock:
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +}
> >>> +
> >>> +/*
> >>> + * vfe_queue_buffer - Add empty buffer
> >>> + * @vid: Video device structure
> >>> + * @buf: Buffer to be enqueued
> >>> + *
> >>> + * Add an empty buffer - depending on the current number of buffers it will be
> >>> + * put in pending buffer queue or directly given to the hardware to be filled.
> >>> + *
> >>> + * Return 0 on success or a negative error code otherwise
> >>> + */
> >>> +static int vfe_queue_buffer(struct camss_video *vid,
> >>> +                         struct camss_buffer *buf)
> >>> +{
> >>> +     struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
> >>> +     struct vfe_device *vfe = to_vfe(line);
> >>> +     struct vfe_output *output;
> >>> +     unsigned long flags;
> >>> +
> >>> +     output = &line->output;
> >>> +
> >>> +     spin_lock_irqsave(&vfe->output_lock, flags);
> >>> +
> >>> +     if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
> >>> +             output->buf[output->gen2.active_num++] = buf;
> >>> +             vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
> >>> +     } else {
> >>> +             vfe_buf_add_pending(output, buf);
> >>> +     }
> >>> +
> >>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +const struct vfe_isr_ops vfe_isr_ops_170 = {
> >>> +     .reset_ack = vfe_isr_reset_ack,
> >>> +     .halt_ack = vfe_isr_halt_ack,
> >>> +     .reg_update = vfe_isr_reg_update,
> >>> +     .sof = vfe_isr_sof,
> >>> +     .comp_done = vfe_isr_comp_done,
> >>> +     .wm_done = vfe_isr_wm_done,
> >>> +};
> >>> +
> >>> +static const struct camss_video_ops vfe_video_ops_170 = {
> >>> +     .queue_buffer = vfe_queue_buffer,
> >>> +     .flush_buffers = vfe_flush_buffers,
> >>> +};
> >>> +
> >>> +static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
> >>> +{
> >>> +     vfe->isr_ops = vfe_isr_ops_170;
> >>> +     vfe->video_ops = vfe_video_ops_170;
> >>> +
> >>> +     vfe->line_num = VFE_LINE_NUM_GEN2;
> >>> +}
> >>> +
> >>> +const struct vfe_hw_ops vfe_ops_170 = {
> >>> +     .global_reset = vfe_global_reset,
> >>> +     .hw_version_read = vfe_hw_version_read,
> >>> +     .isr_read = vfe_isr_read,
> >>> +     .isr = vfe_isr,
> >>> +     .reg_update_clear = vfe_reg_update_clear,
> >>> +     .reg_update = vfe_reg_update,
> >>> +     .subdev_init = vfe_subdev_init,
> >>> +     .vfe_disable = vfe_disable,
> >>> +     .vfe_enable = vfe_enable,
> >>> +     .vfe_halt = vfe_halt,
> >>> +     .violation_read = vfe_violation_read,
> >>> +};
> >>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
> >>> index 375843bd16af..6fafeb8a5484 100644
> >>> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
> >>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
> >>> @@ -96,6 +96,32 @@ static const struct vfe_format formats_pix_8x96[] = {
> >>>        { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
> >>>    };
> >>>
> >>> +static const struct vfe_format formats_rdi_845[] = {
> >>> +     { MEDIA_BUS_FMT_UYVY8_2X8, 8 },
> >>> +     { MEDIA_BUS_FMT_VYUY8_2X8, 8 },
> >>> +     { MEDIA_BUS_FMT_YUYV8_2X8, 8 },
> >>> +     { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
> >>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
> >>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
> >>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
> >>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
> >>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
> >>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
> >>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
> >>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
> >>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },
> >>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
> >>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
> >>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
> >>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
> >>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
> >>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
> >>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
> >>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
> >>> +     { MEDIA_BUS_FMT_Y10_1X10, 10 },
> >>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
> >>> +};
> >>> +
> >>>    /*
> >>>     * vfe_get_bpp - map media bus format to bits per pixel
> >>>     * @formats: supported media bus formats array
> >>> @@ -192,7 +218,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
> >>>                        return sink_code;
> >>>                }
> >>>        else if (vfe->camss->version == CAMSS_8x96 ||
> >>> -              vfe->camss->version == CAMSS_660)
> >>> +              vfe->camss->version == CAMSS_660 ||
> >>> +              vfe->camss->version == CAMSS_845)
> >>>                switch (sink_code) {
> >>>                case MEDIA_BUS_FMT_YUYV8_2X8:
> >>>                {
> >>> @@ -256,13 +283,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
> >>>                return 0;
> >>>    }
> >>>
> >>> -/*
> >>> - * vfe_reset - Trigger reset on VFE module and wait to complete
> >>> - * @vfe: VFE device
> >>> - *
> >>> - * Return 0 on success or a negative error code otherwise
> >>> - */
> >>> -static int vfe_reset(struct vfe_device *vfe)
> >>> +int vfe_reset(struct vfe_device *vfe)
> >>>    {
> >>>        unsigned long time;
> >>>
> >>> @@ -429,7 +450,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
> >>>                struct camss_clock *clock = &vfe->clock[i];
> >>>
> >>>                if (!strcmp(clock->name, "vfe0") ||
> >>> -                 !strcmp(clock->name, "vfe1")) {
> >>> +                 !strcmp(clock->name, "vfe1") ||
> >>> +                 !strcmp(clock->name, "vfe_lite")) {
> >>>                        u64 min_rate = 0;
> >>>                        long rate;
> >>>
> >>> @@ -1268,6 +1290,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
> >>>        case CAMSS_660:
> >>>                vfe->ops = &vfe_ops_4_8;
> >>>                break;
> >>> +
> >>> +     case CAMSS_845:
> >>> +             vfe->ops = &vfe_ops_170;
> >>> +             break;
> >>>        default:
> >>>                return -EINVAL;
> >>>        }
> >>> @@ -1379,6 +1405,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
> >>>                                l->formats = formats_rdi_8x96;
> >>>                                l->nformats = ARRAY_SIZE(formats_rdi_8x96);
> >>>                        }
> >>> +             } else if (camss->version == CAMSS_845) {
> >>> +                     l->formats = formats_rdi_845;
> >>> +                     l->nformats = ARRAY_SIZE(formats_rdi_845);
> >>>                } else {
> >>>                        return -EINVAL;
> >>>                }
> >>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
> >>> index aad5dc74c2c0..29b3d930ffc6 100644
> >>> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
> >>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
> >>> @@ -19,7 +19,6 @@
> >>>    #include "camss-video.h"
> >>>    #include "camss-vfe-gen1.h"
> >>>
> >>> -
> >>>    #define MSM_VFE_PAD_SINK 0
> >>>    #define MSM_VFE_PAD_SRC 1
> >>>    #define MSM_VFE_PADS_NUM 2
> >>> @@ -38,14 +37,14 @@
> >>>    #define to_vfe(ptr_line)    \
> >>>        container_of(vfe_line_array(ptr_line), struct vfe_device, line)
> >>>
> >>> -
> >>>    enum vfe_output_state {
> >>>        VFE_OUTPUT_OFF,
> >>>        VFE_OUTPUT_RESERVED,
> >>>        VFE_OUTPUT_SINGLE,
> >>>        VFE_OUTPUT_CONTINUOUS,
> >>>        VFE_OUTPUT_IDLE,
> >>> -     VFE_OUTPUT_STOPPING
> >>> +     VFE_OUTPUT_STOPPING,
> >>> +     VFE_OUTPUT_ON,
> >>>    };
> >>>
> >>>    enum vfe_line_id {
> >>> @@ -53,6 +52,7 @@ enum vfe_line_id {
> >>>        VFE_LINE_RDI0 = 0,
> >>>        VFE_LINE_RDI1 = 1,
> >>>        VFE_LINE_RDI2 = 2,
> >>> +     VFE_LINE_NUM_GEN2 = 3,
> >>>        VFE_LINE_PIX = 3,
> >>>        VFE_LINE_NUM_GEN1 = 4,
> >>>        VFE_LINE_NUM_MAX = 4
> >>> @@ -73,6 +73,9 @@ struct vfe_output {
> >>>                        int active_buf;
> >>>                        int wait_sof;
> >>>                } gen1;
> >>> +             struct {
> >>> +                     int active_num;
> >>> +             } gen2;
> >>>        };
> >>>        enum vfe_output_state state;
> >>>        unsigned int sequence;
> >>> @@ -171,14 +174,6 @@ void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)
> >>>
> >>>    struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
> >>>
> >>> -/*
> >>> - * vfe_disable - Disable streaming on VFE line
> >>> - * @line: VFE line
> >>> - *
> >>> - * Return 0 on success or a negative error code otherwise
> >>> - */
> >>> -int vfe_disable(struct vfe_line *line);
> >>> -
> >>>    int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
> >>>
> >>>    /*
> >>> @@ -193,8 +188,17 @@ int vfe_put_output(struct vfe_line *line);
> >>>    int vfe_release_wm(struct vfe_device *vfe, u8 wm);
> >>>    int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
> >>>
> >>> +/*
> >>> + * vfe_reset - Trigger reset on VFE module and wait to complete
> >>> + * @vfe: VFE device
> >>> + *
> >>> + * Return 0 on success or a negative error code otherwise
> >>> + */
> >>> +int vfe_reset(struct vfe_device *vfe);
> >>> +
> >>>    extern const struct vfe_hw_ops vfe_ops_4_1;
> >>>    extern const struct vfe_hw_ops vfe_ops_4_7;
> >>>    extern const struct vfe_hw_ops vfe_ops_4_8;
> >>> +extern const struct vfe_hw_ops vfe_ops_170;
> >>>
> >>>    #endif /* QC_MSM_CAMSS_VFE_H */
> >>> diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
> >>> index 97cea7c4d769..f282275af626 100644
> >>> --- a/drivers/media/platform/qcom/camss/camss-video.c
> >>> +++ b/drivers/media/platform/qcom/camss/camss-video.c
> >>> @@ -133,6 +133,55 @@ static const struct camss_format_info formats_rdi_8x96[] = {
> >>>          { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> >>>    };
> >>>
> >>> +static const struct camss_format_info formats_rdi_845[] = {
> >>> +     { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> >>> +     { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> >>> +     { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> >>> +     { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> >>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> >>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> >>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> >>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
> >>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> >>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> >>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> >>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> >>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> >>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> >>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> >>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> >>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
> >>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> >>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> >>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> >>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
> >>> +     { MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
> >>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
> >>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
> >>> +};
> >>> +
> >>>    static const struct camss_format_info formats_pix_8x16[] = {
> >>>        { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
> >>>          { { 1, 1 } }, { { 2, 3 } }, { 8 } },
> >>> @@ -960,6 +1009,9 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
> >>>                        video->formats = formats_rdi_8x96;
> >>>                        video->nformats = ARRAY_SIZE(formats_rdi_8x96);
> >>>                }
> >>> +     }  else if (video->camss->version == CAMSS_845) {
> >>> +             video->formats = formats_rdi_845;
> >>> +             video->nformats = ARRAY_SIZE(formats_rdi_845);
> >>>        } else {
> >>>                ret = -EINVAL;
> >>>                goto error_video_register;
> >>> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> >>> index 6c6f1e59ccd8..0e006def1996 100644
> >>> --- a/drivers/media/platform/qcom/camss/camss.c
> >>> +++ b/drivers/media/platform/qcom/camss/camss.c
> >>> @@ -465,6 +465,67 @@ static const struct resources vfe_res_660[] = {
> >>>        }
> >>>    };
> >>>
> >>> +static const struct resources vfe_res_845[] = {
> >>> +     /* VFE0 */
> >>> +     {
> >>> +             .regulator = { NULL },
> >>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
> >>> +                             "soc_ahb", "vfe0", "vfe0_axi",
> >>> +                             "vfe0_src", "csi0",
> >>> +                             "csi0_src"},
> >>> +             .clock_rate = { { 0 },
> >>> +                             { 0 },
> >>> +                             { 80000000 },
> >>> +                             { 0 },
> >>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
> >>> +                             { 0 },
> >>> +                             { 320000000 },
> >>> +                             { 19200000, 75000000, 384000000, 538666667 },
> >>> +                             { 384000000 } },
> >>> +             .reg = { "vfe0" },
> >>> +             .interrupt = { "vfe0" }
> >>> +     },
> >>> +
> >>> +     /* VFE1 */
> >>> +     {
> >>> +             .regulator = { NULL },
> >>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
> >>> +                             "soc_ahb", "vfe1", "vfe1_axi",
> >>> +                             "vfe1_src", "csi1",
> >>> +                             "csi1_src"},
> >>> +             .clock_rate = { { 0 },
> >>> +                             { 0 },
> >>> +                             { 80000000 },
> >>> +                             { 0 },
> >>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
> >>> +                             { 0 },
> >>> +                             { 320000000 },
> >>> +                             { 19200000, 75000000, 384000000, 538666667 },
> >>> +                             { 384000000 } },
> >>> +             .reg = { "vfe1" },
> >>> +             .interrupt = { "vfe1" }
> >>> +     },
> >>> +
> >>> +     /* VFE-lite */
> >>> +     {
> >>> +             .regulator = { NULL },
> >>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
> >>> +                             "soc_ahb", "vfe_lite",
> >>> +                             "vfe_lite_src", "csi2",
> >>> +                             "csi2_src"},
> >>> +             .clock_rate = { { 0 },
> >>> +                             { 0 },
> >>> +                             { 80000000 },
> >>> +                             { 0 },
> >>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
> >>> +                             { 320000000 },
> >>> +                             { 19200000, 75000000, 384000000, 538666667 },
> >>> +                             { 384000000 } },
> >>> +             .reg = { "vfe_lite" },
> >>> +             .interrupt = { "vfe_lite" }
> >>> +     }
> >>> +};
> >>> +
> >>>    /*
> >>>     * camss_add_clock_margin - Add margin to clock frequency rate
> >>>     * @rate: Clock frequency rate
> >>>
Andrey Konovalov Feb. 22, 2021, 5:24 p.m. UTC | #5 
Hi Robert,

On 22.02.2021 20:21, Robert Foss wrote:
> On Mon, 22 Feb 2021 at 18:06, Andrey Konovalov
> <andrey.konovalov@linaro.org> wrote:
>>
>> Hi Robert,
>>
>> On 22.02.2021 19:37, Robert Foss wrote:
>>> On Sat, 20 Feb 2021 at 22:40, Andrey Konovalov
>>> <andrey.konovalov@linaro.org> wrote:
>>>>
>>>> Hi Robert,
>>>>
>>>> Thank you for your patch!
>>>>
>>>> On 17.02.2021 14:21, Robert Foss wrote:
>>>>> Add register definitions for version 170 of the Titan architecture
>>>>> and implement support for the RDI output mode.
>>>>>
>>>>> The RDI mode as opposed to the PIX output mode for the VFE unit does
>>>>> not support any ISP functionality. This means essentially only
>>>>> supporting dumping the output of the whatever the CSI decoder receives
>>>>> from the sensor.
>>>>>
>>>>> For example will a sensor outputting YUV pixel format frames, only
>>>>> allow the VFE to dump those frames as they are received by the ISP
>>>>> to memory through the RDI interface.
>>>>>
>>>>> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>>>>> ---
>>>>>
>>>>>
>>>>> Changes since v1:
>>>>>     - Andrey: Remove commented out chunk
>>>>>     - Remove left over WIP comments
>>>>>
>>>>> Changes since v4:
>>>>>     - Andrey: Remove traces of PIX support
>>>>>     - Andrey: Fix vfe_global_reset() overwriting reset command
>>>>>     - Remove unused variable
>>>>>
>>>>>
>>>>>
>>>>>     drivers/media/platform/qcom/camss/Makefile    |   1 +
>>>>>     .../media/platform/qcom/camss/camss-vfe-170.c | 790 ++++++++++++++++++
>>>>>     drivers/media/platform/qcom/camss/camss-vfe.c |  47 +-
>>>>>     drivers/media/platform/qcom/camss/camss-vfe.h |  26 +-
>>>>>     .../media/platform/qcom/camss/camss-video.c   |  52 ++
>>>>>     drivers/media/platform/qcom/camss/camss.c     |  61 ++
>>>>>     6 files changed, 957 insertions(+), 20 deletions(-)
>>>>>     create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-170.c
>>>>>
>>>>> diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
>>>>> index 940c0ae3e003..052c4f405fa3 100644
>>>>> --- a/drivers/media/platform/qcom/camss/Makefile
>>>>> +++ b/drivers/media/platform/qcom/camss/Makefile
>>>>> @@ -11,6 +11,7 @@ qcom-camss-objs += \
>>>>>                 camss-vfe-4-1.o \
>>>>>                 camss-vfe-4-7.o \
>>>>>                 camss-vfe-4-8.o \
>>>>> +             camss-vfe-170.o \
>>>>>                 camss-vfe-gen1.o \
>>>>>                 camss-vfe.o \
>>>>>                 camss-video.o \
>>>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
>>>>> new file mode 100644
>>>>> index 000000000000..c4991b1f22f8
>>>>> --- /dev/null
>>>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
>>>>> @@ -0,0 +1,790 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0
>>>>> +/*
>>>>> + * camss-vfe-4-7.c
>>>>> + *
>>>>> + * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7
>>>>> + *
>>>>> + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
>>>>> + * Copyright (C) 2015-2018 Linaro Ltd.
>>>>
>>>> - it looks like the header comes from v4.7 without updating to Titan 170
>>>
>>> Gotcha, thanks!
>>>
>>>>
>>>>> + */
>>>>> +
>>>>> +#include <linux/delay.h>
>>>>> +#include <linux/interrupt.h>
>>>>> +#include <linux/io.h>
>>>>> +#include <linux/iopoll.h>
>>>>> +
>>>>> +#include "camss.h"
>>>>> +#include "camss-vfe.h"
>>>>> +
>>>>> +#define VFE_HW_VERSION                               (0x000)
>>>>> +
>>>>> +#define VFE_GLOBAL_RESET_CMD                 (0x018)
>>>>> +#define              GLOBAL_RESET_CMD_CORE           BIT(0)
>>>>> +#define              GLOBAL_RESET_CMD_CAMIF          BIT(1)
>>>>> +#define              GLOBAL_RESET_CMD_BUS            BIT(2)
>>>>> +#define              GLOBAL_RESET_CMD_BUS_BDG        BIT(3)
>>>>> +#define              GLOBAL_RESET_CMD_REGISTER       BIT(4)
>>>>> +#define              GLOBAL_RESET_CMD_PM             BIT(5)
>>>>> +#define              GLOBAL_RESET_CMD_BUS_MISR       BIT(6)
>>>>> +#define              GLOBAL_RESET_CMD_TESTGEN        BIT(7)
>>>>> +#define              GLOBAL_RESET_CMD_DSP            BIT(8)
>>>>> +#define              GLOBAL_RESET_CMD_IDLE_CGC       BIT(9)
>>>>> +#define              GLOBAL_RESET_CMD_RDI0           BIT(10)
>>>>> +#define              GLOBAL_RESET_CMD_RDI1           BIT(11)
>>>>> +#define              GLOBAL_RESET_CMD_RDI2           BIT(12)
>>>>> +#define              GLOBAL_RESET_CMD_RDI3           BIT(13)
>>>>> +#define              GLOBAL_RESET_CMD_VFE_DOMAIN     BIT(30)
>>>>> +#define              GLOBAL_RESET_CMD_RESET_BYPASS   BIT(31)
>>>>> +
>>>>> +
>>>>> +#define VFE_CORE_CFG                         (0x050)
>>>>> +#define              CFG_PIXEL_PATTERN_YCBYCR        (0x4)
>>>>> +#define              CFG_PIXEL_PATTERN_YCRYCB        (0x5)
>>>>> +#define              CFG_PIXEL_PATTERN_CBYCRY        (0x6)
>>>>> +#define              CFG_PIXEL_PATTERN_CRYCBY        (0x7)
>>>>> +#define              CFG_COMPOSITE_REG_UPDATE_EN     BIT(4)
>>>>> +
>>>>> +#define VFE_IRQ_CMD                          (0x058)
>>>>> +#define              CMD_GLOBAL_CLEAR                BIT(0)
>>>>> +
>>>>> +#define VFE_IRQ_MASK_0                                       (0x05c)
>>>>> +#define              MASK_0_CAMIF_SOF                        BIT(0)
>>>>> +#define              MASK_0_CAMIF_EOF                        BIT(1)
>>>>> +#define              MASK_0_RDI_REG_UPDATE(n)                BIT((n) + 5)
>>>>> +#define              MASK_0_IMAGE_MASTER_n_PING_PONG(n)      BIT((n) + 8)
>>>>> +#define              MASK_0_IMAGE_COMPOSITE_DONE_n(n)        BIT((n) + 25)
>>>>> +#define              MASK_0_RESET_ACK                        BIT(31)
>>>>> +
>>>>> +#define VFE_IRQ_MASK_1                                       (0x060)
>>>>> +#define              MASK_1_CAMIF_ERROR                      BIT(0)
>>>>> +#define              MASK_1_VIOLATION                        BIT(7)
>>>>> +#define              MASK_1_BUS_BDG_HALT_ACK                 BIT(8)
>>>>> +#define              MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n)   BIT((n) + 9)
>>>>> +#define              MASK_1_RDI_SOF(n)                       BIT((n) + 29)
>>>>> +
>>>>> +#define VFE_IRQ_CLEAR_0                                      (0x064)
>>>>> +#define VFE_IRQ_CLEAR_1                                      (0x068)
>>>>> +
>>>>> +#define VFE_IRQ_STATUS_0                             (0x06c)
>>>>> +#define              STATUS_0_CAMIF_SOF                      BIT(0)
>>>>> +#define              STATUS_0_RDI_REG_UPDATE(n)              BIT((n) + 5)
>>>>> +#define              STATUS_0_IMAGE_MASTER_PING_PONG(n)      BIT((n) + 8)
>>>>> +#define              STATUS_0_IMAGE_COMPOSITE_DONE(n)        BIT((n) + 25)
>>>>> +#define              STATUS_0_RESET_ACK                      BIT(31)
>>>>> +
>>>>> +#define VFE_IRQ_STATUS_1                             (0x070)
>>>>> +#define              STATUS_1_VIOLATION                      BIT(7)
>>>>> +#define              STATUS_1_BUS_BDG_HALT_ACK               BIT(8)
>>>>> +#define              STATUS_1_RDI_SOF(n)                     BIT((n) + 27)
>>>>> +
>>>>> +#define VFE_VIOLATION_STATUS                 (0x07c)
>>>>> +
>>>>> +#define VFE_CAMIF_CMD                                (0x478)
>>>>> +#define              CMD_CLEAR_CAMIF_STATUS          BIT(2)
>>>>> +
>>>>> +#define VFE_CAMIF_CFG                                (0x47c)
>>>>> +#define              CFG_VSYNC_SYNC_EDGE             (0)
>>>>> +#define                      VSYNC_ACTIVE_HIGH       (0)
>>>>> +#define                      VSYNC_ACTIVE_LOW        (1)
>>>>> +#define              CFG_HSYNC_SYNC_EDGE             (1)
>>>>> +#define                      HSYNC_ACTIVE_HIGH       (0)
>>>>> +#define                      HSYNC_ACTIVE_LOW        (1)
>>>>> +#define              CFG_VFE_SUBSAMPLE_ENABLE        BIT(4)
>>>>> +#define              CFG_BUS_SUBSAMPLE_ENABLE        BIT(5)
>>>>> +#define              CFG_VFE_OUTPUT_EN               BIT(6)
>>>>> +#define              CFG_BUS_OUTPUT_EN               BIT(7)
>>>>> +#define              CFG_BINNING_EN                  BIT(9)
>>>>> +#define              CFG_FRAME_BASED_EN              BIT(10)
>>>>> +#define              CFG_RAW_CROP_EN                 BIT(22)
>>>>> +
>>>>> +// XXX different, don't exist in TITAN register docs
>>>>> +#define VFE_0_CAMIF_FRAME_CFG                        0x484
>>>>> +#define VFE_0_CAMIF_WINDOW_WIDTH_CFG         0x488
>>>>> +#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG                0x48c
>>>>> +#define VFE_0_CAMIF_SUBSAMPLE_CFG            0x490
>>>>> +#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN    0x498
>>>>> +#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN    0x49c
>>>>> +#define VFE_0_CAMIF_STATUS                   0x4a4
>>>>> +#define VFE_0_CAMIF_STATUS_HALT                      BIT(31)
>>>>> +#define CAMIF_TIMEOUT_SLEEP_US 1000
>>>>> +#define CAMIF_TIMEOUT_ALL_US 1000000
>>>>> +
>>>>> +#define VFE_REG_UPDATE_CMD                   (0x4ac)
>>>>> +#define              REG_UPDATE_RDI(n)               BIT(1 + (n))
>>>>> +
>>>>> +
>>>>> +#define VFE_BUS_IRQ_MASK(n)          (0x2044 + (n) * 4)
>>>>> +#define VFE_BUS_IRQ_CLEAR(n)         (0x2050 + (n) * 4)
>>>>> +
>>>>> +#define VFE_BUS_IRQ_STATUS(n)                (0x205c + (n) * 4)
>>>>> +#define              STATUS0_COMP_RESET_DONE         BIT(0)
>>>>> +#define              STATUS0_COMP_REG_UPDATE0_DONE   BIT(1)
>>>>> +#define              STATUS0_COMP_REG_UPDATE1_DONE   BIT(2)
>>>>> +#define              STATUS0_COMP_REG_UPDATE2_DONE   BIT(3)
>>>>> +#define              STATUS0_COMP_REG_UPDATE3_DONE   BIT(4)
>>>>> +#define              STATUS0_COMP_REG_UPDATE_DONE(n) BIT(n + 1)
>>>>> +#define              STATUS0_COMP0_BUF_DONE          BIT(5)
>>>>> +#define              STATUS0_COMP1_BUF_DONE          BIT(6)
>>>>> +#define              STATUS0_COMP2_BUF_DONE          BIT(7)
>>>>> +#define              STATUS0_COMP3_BUF_DONE          BIT(8)
>>>>> +#define              STATUS0_COMP4_BUF_DONE          BIT(9)
>>>>> +#define              STATUS0_COMP5_BUF_DONE          BIT(10)
>>>>> +#define              STATUS0_COMP_BUF_DONE(n)        BIT(n + 5)
>>>>> +#define              STATUS0_COMP_ERROR              BIT(11)
>>>>> +#define              STATUS0_COMP_OVERWRITE          BIT(12)
>>>>> +#define              STATUS0_OVERFLOW                BIT(13)
>>>>> +#define              STATUS0_VIOLATION               BIT(14)
>>>>> +/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */
>>>>> +#define              STATUS1_WM_CLIENT_BUF_DONE(n)           BIT(n)
>>>>> +#define              STATUS1_EARLY_DONE                      BIT(24)
>>>>> +#define              STATUS2_DUAL_COMP0_BUF_DONE             BIT(0)
>>>>> +#define              STATUS2_DUAL_COMP1_BUF_DONE             BIT(1)
>>>>> +#define              STATUS2_DUAL_COMP2_BUF_DONE             BIT(2)
>>>>> +#define              STATUS2_DUAL_COMP3_BUF_DONE             BIT(3)
>>>>> +#define              STATUS2_DUAL_COMP4_BUF_DONE             BIT(4)
>>>>> +#define              STATUS2_DUAL_COMP5_BUF_DONE             BIT(5)
>>>>> +#define              STATUS2_DUAL_COMP_BUF_DONE(n)           BIT(n)
>>>>> +#define              STATUS2_DUAL_COMP_ERROR                 BIT(6)
>>>>> +#define              STATUS2_DUAL_COMP_OVERWRITE             BIT(7)
>>>>> +
>>>>> +#define VFE_BUS_IRQ_CLEAR_GLOBAL             (0x2068)
>>>>> +
>>>>> +#define VFE_BUS_WM_DEBUG_STATUS_CFG          (0x226c)
>>>>> +#define              DEBUG_STATUS_CFG_STATUS0(n)     BIT(n)
>>>>> +#define              DEBUG_STATUS_CFG_STATUS1(n)     BIT(8+n)
>>>>> +
>>>>> +#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER    (0x2080)
>>>>> +
>>>>> +#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC         (0x2084)
>>>>> +#define              BUS_VER2_MAX_CLIENTS (24)
>>>>> +#define              WM_ADDR_NO_SYNC_DEFAULT_VAL \
>>>>> +                             ((1 << BUS_VER2_MAX_CLIENTS) - 1)
>>>>> +
>>>>> +#define VFE_BUS_WM_CGC_OVERRIDE                      (0x200c)
>>>>> +#define              WM_CGC_OVERRIDE_ALL             (0xFFFFF)
>>>>> +
>>>>> +#define VFE_BUS_WM_TEST_BUS_CTRL             (0x211c)
>>>>> +
>>>>> +#define VFE_BUS_WM_STATUS0(n)                        (0x2200 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_STATUS1(n)                        (0x2204 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_CFG(n)                    (0x2208 + (n) * 0x100)
>>>>> +#define              WM_CFG_EN                       (0)
>>>>> +#define              WM_CFG_MODE                     (1)
>>>>> +#define                      MODE_QCOM_PLAIN (0)
>>>>> +#define                      MODE_MIPI_RAW   (1)
>>>>> +#define              WM_CFG_VIRTUALFRAME             (2)
>>>>> +#define VFE_BUS_WM_HEADER_ADDR(n)            (0x220c + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_HEADER_CFG(n)             (0x2210 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_IMAGE_ADDR(n)             (0x2214 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n)              (0x2218 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n)               (0x221c + (n) * 0x100)
>>>>> +#define              WM_BUFFER_DEFAULT_WIDTH         (0xFF01)
>>>>> +
>>>>> +#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n)              (0x2220 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_PACKER_CFG(n)             (0x2224 + (n) * 0x100)
>>>>> +
>>>>> +#define VFE_BUS_WM_STRIDE(n)                 (0x2228 + (n) * 0x100)
>>>>> +#define              WM_STRIDE_DEFAULT_STRIDE        (0xFF01)
>>>>> +
>>>>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)   (0x2248 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)  (0x224c + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)               (0x2250 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)              (0x2254 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_FRAME_INC(n)                      (0x2258 + (n) * 0x100)
>>>>> +#define VFE_BUS_WM_BURST_LIMIT(n)            (0x225c + (n) * 0x100)
>>>>> +
>>>>> +
>>>>> +static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
>>>>> +{
>>>>> +     u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
>>>>> +
>>>>> +     u32 gen = (hw_version >> 28) & 0xF;
>>>>> +     u32 rev = (hw_version >> 16) & 0xFFF;
>>>>> +     u32 step = hw_version & 0xFFFF;
>>>>> +
>>>>> +     dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
>>>>> +}
>>>>> +
>>>>> +static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
>>>>> +{
>>>>> +     u32 bits = readl_relaxed(vfe->base + reg);
>>>>> +
>>>>> +     writel_relaxed(bits & ~clr_bits, vfe->base + reg);
>>>>> +}
>>>>> +
>>>>> +static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
>>>>> +{
>>>>> +     u32 bits = readl_relaxed(vfe->base + reg);
>>>>> +
>>>>> +     writel_relaxed(bits | set_bits, vfe->base + reg);
>>>>> +}
>>>>> +
>>>>> +static void vfe_global_reset(struct vfe_device *vfe)
>>>>> +{
>>>>> +     u32 reset_bits = GLOBAL_RESET_CMD_CORE          |
>>>>> +                      GLOBAL_RESET_CMD_CAMIF         |
>>>>> +                      GLOBAL_RESET_CMD_BUS           |
>>>>> +                      GLOBAL_RESET_CMD_REGISTER      |
>>>>> +                      GLOBAL_RESET_CMD_PM            |
>>>>> +                      GLOBAL_RESET_CMD_BUS_MISR      |
>>>>> +                      GLOBAL_RESET_CMD_IDLE_CGC      |
>>>>> +                      GLOBAL_RESET_CMD_RDI0          |
>>>>> +                      GLOBAL_RESET_CMD_RDI1          |
>>>>> +                      GLOBAL_RESET_CMD_RDI2;
>>>>
>>>> - so the reset_bits is set to 0x00001E77 in v5.
>>>>
>>>> In v4 the reset_bits was set to 0x00003F9F which corresponds to:
>>>>
>>>>           GLOBAL_RESET_CMD_CORE           |
>>>>           GLOBAL_RESET_CMD_CAMIF          |
>>>>           GLOBAL_RESET_CMD_BUS            |
>>>>           GLOBAL_RESET_CMD_BUS_BDG        |
>>>>           GLOBAL_RESET_CMD_REGISTER       |
>>>>           GLOBAL_RESET_CMD_TESTGEN        |
>>>>           GLOBAL_RESET_CMD_DSP            |
>>>>           GLOBAL_RESET_CMD_IDLE_CGC       |
>>>>           GLOBAL_RESET_CMD_RDI0           |
>>>>           GLOBAL_RESET_CMD_RDI1           |
>>>>           GLOBAL_RESET_CMD_RDI2           |
>>>>           GLOBAL_RESET_CMD_RDI3;
>>>>
>>>> So the difference between v4 and v5 is:
>>>>
>>>> reset in v4, not reset in v5:
>>>>           GLOBAL_RESET_CMD_BUS_BDG
>>>>           GLOBAL_RESET_CMD_TESTGEN
>>>>           GLOBAL_RESET_CMD_DSP
>>>>
>>>> reset in v5, not reset in v4:
>>>>           GLOBAL_RESET_CMD_PM
>>>>           GLOBAL_RESET_CMD_BUS_MISR
>>>>
>>>> - correct?
>>>>
>>>>      It is probably worth a few words in the v4 vs v5 changelog.
>>>>
>>>>      (dropping GLOBAL_RESET_CMD_RDI3 in v5 is clear - Titan 170 has only RDI0 to RDI2
>>>>      according to the driver code)
>>>>
>>>
>>> Great catch! I made a mistake with the bit-ordering after doing a
>>> hex->binary translation.
>>> I'll straighten this out in v6.
>>>
>>>>> +
>>>>> +     writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);
>>>>> +
>>>>> +     /* Make sure IRQ mask has been written before resetting */
>>>>> +     wmb();
>>>>> +
>>>>> +     writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);
>>>>> +}
>>>>> +
>>>>> +static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
>>>>> +{
>>>>> +     u32 val;
>>>>> +
>>>>> +     /*Set Debug Registers*/
>>>>> +     val = DEBUG_STATUS_CFG_STATUS0(1) |
>>>>> +           DEBUG_STATUS_CFG_STATUS0(7);
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);
>>>>> +
>>>>> +     /* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */
>>>>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);
>>>>> +
>>>>> +     /* no clock gating at bus input */
>>>>> +     val = WM_CGC_OVERRIDE_ALL;
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
>>>>> +
>>>>> +     writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
>>>>> +
>>>>> +     /* if addr_no_sync has default value then config the addr no sync reg */
>>>>> +     val = WM_ADDR_NO_SYNC_DEFAULT_VAL;
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);
>>>>> +
>>>>> +     writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
>>>>> +
>>>>> +     val = WM_BUFFER_DEFAULT_WIDTH;
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));
>>>>> +
>>>>> +     val = 0;
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));
>>>>> +
>>>>> +     val = 0;
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
>>>>> +
>>>>> +     /* Configure stride for RDIs */
>>>>> +     //val = pix->plane_fmt[0].bytesperline;
>>>>> +     val = WM_STRIDE_DEFAULT_STRIDE;
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
>>>>> +
>>>>> +     /* Enable WM */
>>>>> +     val = 1 << WM_CFG_EN |
>>>>> +           MODE_MIPI_RAW << WM_CFG_MODE;
>>>>> +     writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));
>>>>> +}
>>>>> +
>>>>> +static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
>>>>> +{
>>>>> +     /* Disable WM */
>>>>> +     writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
>>>>> +}
>>>>> +
>>>>> +static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
>>>>> +                       struct vfe_line *line)
>>>>> +{
>>>>> +     struct v4l2_pix_format_mplane *pix =
>>>>> +             &line->video_out.active_fmt.fmt.pix_mp;
>>>>> +     u32 stride = pix->plane_fmt[0].bytesperline;
>>>>> +
>>>>> +     writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
>>>>> +     writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));
>>>>> +}
>>>>> +
>>>>> +static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
>>>>> +{
>>>>> +     vfe->reg_update |= REG_UPDATE_RDI(line_id);
>>>>> +
>>>>> +     /* Enforce ordering between previous reg writes and reg update */
>>>>> +     wmb();
>>>>> +
>>>>> +     writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
>>>>> +
>>>>> +     /* Enforce ordering between reg update and subsequent reg writes */
>>>>> +     wmb();
>>>>> +}
>>>>> +
>>>>> +static inline void vfe_reg_update_clear(struct vfe_device *vfe,
>>>>> +                                     enum vfe_line_id line_id)
>>>>> +{
>>>>> +     vfe->reg_update &= ~REG_UPDATE_RDI(line_id);
>>>>> +}
>>>>> +
>>>>> +static void vfe_enable_irq_common(struct vfe_device *vfe)
>>>>> +{
>>>>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
>>>>> +     vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
>>>>> +
>>>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
>>>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
>>>>> +     writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
>>>>
>>>> Looking at the #defines in the beginning of this file, only part
>>>> of the IRQ sources (not the whole 32 per each register) are used
>>>> or defined.
>>>>
>>>> Is it safe to unmask the unused (reserved?) bits in the above 5
>>>> IRQ mask registers?
>>>
>>> Unfortunately this register is not defined at all in any documentation
>>> of the downstream[1] kernel, so I think the situation is actually a
>>> bit worse than what you've pointed out here.
>>> I'd like to remove the register defines above since I don't have a
>>> reliable source for them. But I would like to keep the register writes
>>> just as they are since that seems to work.
>>>
>>> What are your thoughts?
>>
>> Without having the documentation, using the known good writes is fine.
>> Removing the unused defines is also good.
> 
> Some of the register definitions like STATUS0_COMP_BUF_DONE is used
> currently, and are documented for later generations of this hardware.
> But I'm not finding any traces for this generation. Chances are that
> they are the same, but I cant guarantee it. But at least some of them
> seem to be correct, and are indeed needed. I'm tempted to leave this
> exactly the way it is. Would that be ok for you?

Yes, that's OK for me.

Thanks,
Andrey

>>
>> Thanks,
>> Andrey
>>
>>> [1] https://git.linaro.org/people/robert.foss/linux.git/log/?h=msm_sdm845
>>>
>>>>
>>>>> +}
>>>>> +
>>>>> +static void vfe_isr_halt_ack(struct vfe_device *vfe)
>>>>> +{
>>>>> +     complete(&vfe->halt_complete);
>>>>> +}
>>>>> +
>>>>> +static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
>>>>> +{
>>>>> +     *status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
>>>>> +     *status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
>>>>> +
>>>>> +     writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
>>>>> +     writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
>>>>> +
>>>>> +     /* Enforce ordering between IRQ Clear and Global IRQ Clear */
>>>>> +     wmb();
>>>>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
>>>>> +}
>>>>> +
>>>>> +static void vfe_violation_read(struct vfe_device *vfe)
>>>>> +{
>>>>> +     u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
>>>>> +
>>>>> +     pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_isr - VFE module interrupt handler
>>>>> + * @irq: Interrupt line
>>>>> + * @dev: VFE device
>>>>> + *
>>>>> + * Return IRQ_HANDLED on success
>>>>> + */
>>>>> +static irqreturn_t vfe_isr(int irq, void *dev)
>>>>> +{
>>>>> +     struct vfe_device *vfe = dev;
>>>>> +     u32 status0, status1, vfe_bus_status[3];
>>>>> +     int i, wm;
>>>>> +
>>>>> +     status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
>>>>> +     status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
>>>>> +
>>>>> +     writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);
>>>>> +     writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);
>>>>> +
>>>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {
>>>>> +             vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));
>>>>> +             writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));
>>>>> +     }
>>>>> +
>>>>> +     /* Enforce ordering between IRQ reading and interpretation */
>>>>> +     wmb();
>>>>> +
>>>>> +     writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
>>>>> +     writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
>>>>> +
>>>>> +     if (status0 & STATUS_0_RESET_ACK)
>>>>> +             vfe->isr_ops.reset_ack(vfe);
>>>>> +
>>>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
>>>>> +             if (status0 & STATUS_0_RDI_REG_UPDATE(i))
>>>>> +                     vfe->isr_ops.reg_update(vfe, i);
>>>>> +
>>>>> +     for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
>>>>> +             if (status0 & STATUS_1_RDI_SOF(i))
>>>>> +                     vfe->isr_ops.sof(vfe, i);
>>>>> +
>>>>> +     for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
>>>>> +             if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
>>>>> +                     vfe->isr_ops.comp_done(vfe, i);
>>>>> +
>>>>> +     for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)
>>>>> +             if (status0 & BIT(9))
>>>>> +                     if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))
>>>>> +                             vfe->isr_ops.wm_done(vfe, wm);
>>>>> +
>>>>> +     return IRQ_HANDLED;
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_halt - Trigger halt on VFE module and wait to complete
>>>>> + * @vfe: VFE device
>>>>> + *
>>>>> + * Return 0 on success or a negative error code otherwise
>>>>> + */
>>>>> +static int vfe_halt(struct vfe_device *vfe)
>>>>> +{
>>>>> +     unsigned long time;
>>>>> +
>>>>> +     return 0;
>>>>> +
>>>>> +     reinit_completion(&vfe->halt_complete);
>>>>> +
>>>>> +     time = wait_for_completion_timeout(&vfe->halt_complete,
>>>>> +             msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
>>>>> +     if (!time) {
>>>>> +             dev_err(vfe->camss->dev, "VFE halt timeout\n");
>>>>> +             return -EIO;
>>>>> +     }
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +static int vfe_get_output(struct vfe_line *line)
>>>>> +{
>>>>> +     struct vfe_device *vfe = to_vfe(line);
>>>>> +     struct vfe_output *output;
>>>>> +     unsigned long flags;
>>>>> +     int i;
>>>>> +     int wm_idx;
>>>>> +
>>>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>>>> +
>>>>> +     output = &line->output;
>>>>> +     if (output->state != VFE_OUTPUT_OFF) {
>>>>> +             dev_err(vfe->camss->dev, "Output is running\n");
>>>>> +             goto error;
>>>>> +     }
>>>>> +
>>>>> +     output->wm_num = 1;
>>>>> +
>>>>> +     for (i = 0; i < output->wm_num; i++) {
>>>>
>>>> - this for loop can now be omitted ("for (i = 0; i < 1; i++)" is just one pass) ...
>>>
>>> Ack.
>>>
>>>>
>>>>> +             wm_idx = vfe_reserve_wm(vfe, line->id);
>>>>> +             if (wm_idx < 0) {
>>>>> +                     dev_err(vfe->camss->dev, "Can not reserve wm\n");
>>>>> +                     goto error_get_wm;
>>>>> +             }
>>>>> +             output->wm_idx[i] = wm_idx;
>>>>> +     }
>>>>> +
>>>>> +     output->drop_update_idx = 0;
>>>>> +
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +
>>>>> +     return 0;
>>>>> +
>>>>> +error_get_wm:
>>>>> +     for (i--; i >= 0; i--)
>>>>
>>>> - ... and this one too. And the "i" local var is no longer needed.
>>>
>>> Ack
>>>
>>>>
>>>> Thanks,
>>>> Andrey
>>>>
>>>>> +             vfe_release_wm(vfe, output->wm_idx[i]);
>>>>> +     output->state = VFE_OUTPUT_OFF;
>>>>> +error:
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +
>>>>> +     return -EINVAL;
>>>>> +}
>>>>> +
>>>>> +static int vfe_enable_output(struct vfe_line *line)
>>>>> +{
>>>>> +     struct vfe_device *vfe = to_vfe(line);
>>>>> +     struct vfe_output *output = &line->output;
>>>>> +     const struct vfe_hw_ops *ops = vfe->ops;
>>>>> +     struct media_entity *sensor;
>>>>> +     unsigned long flags;
>>>>> +     unsigned int frame_skip = 0;
>>>>> +     unsigned int i;
>>>>> +
>>>>> +     sensor = camss_find_sensor(&line->subdev.entity);
>>>>> +     if (sensor) {
>>>>> +             struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
>>>>> +
>>>>> +             v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
>>>>> +             /* Max frame skip is 29 frames */
>>>>> +             if (frame_skip > VFE_FRAME_DROP_VAL - 1)
>>>>> +                     frame_skip = VFE_FRAME_DROP_VAL - 1;
>>>>> +     }
>>>>> +
>>>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>>>> +
>>>>> +     ops->reg_update_clear(vfe, line->id);
>>>>> +
>>>>> +     if (output->state != VFE_OUTPUT_OFF) {
>>>>> +             dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
>>>>> +                     output->state);
>>>>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +             return -EINVAL;
>>>>> +     }
>>>>> +
>>>>> +     WARN_ON(output->gen2.active_num);
>>>>> +
>>>>> +     output->state = VFE_OUTPUT_ON;
>>>>> +
>>>>> +     output->sequence = 0;
>>>>> +     output->wait_reg_update = 0;
>>>>> +     reinit_completion(&output->reg_update);
>>>>> +
>>>>> +     vfe_wm_start(vfe, output->wm_idx[0], line);
>>>>> +
>>>>> +     for (i = 0; i < 2; i++) {
>>>>> +             output->buf[i] = vfe_buf_get_pending(output);
>>>>> +             if (!output->buf[i])
>>>>> +                     break;
>>>>> +             output->gen2.active_num++;
>>>>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
>>>>> +     }
>>>>> +
>>>>> +     ops->reg_update(vfe, line->id);
>>>>> +
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +static int vfe_disable_output(struct vfe_line *line)
>>>>> +{
>>>>> +     struct vfe_device *vfe = to_vfe(line);
>>>>> +     struct vfe_output *output = &line->output;
>>>>> +     unsigned long flags;
>>>>> +     unsigned int i;
>>>>> +     bool done;
>>>>> +     int timeout = 0;
>>>>> +
>>>>> +     do {
>>>>> +             spin_lock_irqsave(&vfe->output_lock, flags);
>>>>> +             done = !output->gen2.active_num;
>>>>> +             spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +             usleep_range(10000, 20000);
>>>>> +
>>>>> +             if (timeout++ == 100) {
>>>>> +                     dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
>>>>> +                     vfe_reset(vfe);
>>>>> +                     output->gen2.active_num = 0;
>>>>> +                     return 0;
>>>>> +             }
>>>>> +     } while (!done);
>>>>> +
>>>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>>>> +     for (i = 0; i < output->wm_num; i++)
>>>>> +             vfe_wm_stop(vfe, output->wm_idx[i]);
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_enable - Enable streaming on VFE line
>>>>> + * @line: VFE line
>>>>> + *
>>>>> + * Return 0 on success or a negative error code otherwise
>>>>> + */
>>>>> +static int vfe_enable(struct vfe_line *line)
>>>>> +{
>>>>> +     struct vfe_device *vfe = to_vfe(line);
>>>>> +     int ret;
>>>>> +
>>>>> +     mutex_lock(&vfe->stream_lock);
>>>>> +
>>>>> +     if (!vfe->stream_count)
>>>>> +             vfe_enable_irq_common(vfe);
>>>>> +
>>>>> +     vfe->stream_count++;
>>>>> +
>>>>> +     mutex_unlock(&vfe->stream_lock);
>>>>> +
>>>>> +     ret = vfe_get_output(line);
>>>>> +     if (ret < 0)
>>>>> +             goto error_get_output;
>>>>> +
>>>>> +     ret = vfe_enable_output(line);
>>>>> +     if (ret < 0)
>>>>> +             goto error_enable_output;
>>>>> +
>>>>> +     vfe->was_streaming = 1;
>>>>> +
>>>>> +     return 0;
>>>>> +
>>>>> +
>>>>> +error_enable_output:
>>>>> +     vfe_put_output(line);
>>>>> +
>>>>> +error_get_output:
>>>>> +     mutex_lock(&vfe->stream_lock);
>>>>> +
>>>>> +     vfe->stream_count--;
>>>>> +
>>>>> +     mutex_unlock(&vfe->stream_lock);
>>>>> +
>>>>> +     return ret;
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_disable - Disable streaming on VFE line
>>>>> + * @line: VFE line
>>>>> + *
>>>>> + * Return 0 on success or a negative error code otherwise
>>>>> + */
>>>>> +static int vfe_disable(struct vfe_line *line)
>>>>> +{
>>>>> +     struct vfe_device *vfe = to_vfe(line);
>>>>> +
>>>>> +     vfe_disable_output(line);
>>>>> +
>>>>> +     vfe_put_output(line);
>>>>> +
>>>>> +     mutex_lock(&vfe->stream_lock);
>>>>> +
>>>>> +     vfe->stream_count--;
>>>>> +
>>>>> +     mutex_unlock(&vfe->stream_lock);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_isr_sof - Process start of frame interrupt
>>>>> + * @vfe: VFE Device
>>>>> + * @line_id: VFE line
>>>>> + */
>>>>> +static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
>>>>> +{
>>>>> +
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_isr_reg_update - Process reg update interrupt
>>>>> + * @vfe: VFE Device
>>>>> + * @line_id: VFE line
>>>>> + */
>>>>> +static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
>>>>> +{
>>>>> +     struct vfe_output *output;
>>>>> +     unsigned long flags;
>>>>> +
>>>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>>>> +     vfe->ops->reg_update_clear(vfe, line_id);
>>>>> +
>>>>> +     output = &vfe->line[line_id].output;
>>>>> +
>>>>> +     if (output->wait_reg_update) {
>>>>> +             output->wait_reg_update = 0;
>>>>> +             complete(&output->reg_update);
>>>>> +     }
>>>>> +
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_isr_wm_done - Process write master done interrupt
>>>>> + * @vfe: VFE Device
>>>>> + * @wm: Write master id
>>>>> + */
>>>>> +static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
>>>>> +{
>>>>> +     struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
>>>>> +     struct camss_buffer *ready_buf;
>>>>> +     struct vfe_output *output;
>>>>> +     unsigned long flags;
>>>>> +     u32 index;
>>>>> +     u64 ts = ktime_get_ns();
>>>>> +
>>>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>>>> +
>>>>> +     if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
>>>>> +             dev_err_ratelimited(vfe->camss->dev,
>>>>> +                                 "Received wm done for unmapped index\n");
>>>>> +             goto out_unlock;
>>>>> +     }
>>>>> +     output = &vfe->line[vfe->wm_output_map[wm]].output;
>>>>> +
>>>>> +     ready_buf = output->buf[0];
>>>>> +     if (!ready_buf) {
>>>>> +             dev_err_ratelimited(vfe->camss->dev,
>>>>> +                                 "Missing ready buf %d!\n", output->state);
>>>>> +             goto out_unlock;
>>>>> +     }
>>>>> +
>>>>> +     ready_buf->vb.vb2_buf.timestamp = ts;
>>>>> +     ready_buf->vb.sequence = output->sequence++;
>>>>> +
>>>>> +     index = 0;
>>>>> +     output->buf[0] = output->buf[1];
>>>>> +     if (output->buf[0])
>>>>> +             index = 1;
>>>>> +
>>>>> +     output->buf[index] = vfe_buf_get_pending(output);
>>>>> +
>>>>> +     if (output->buf[index])
>>>>> +             vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
>>>>> +     else
>>>>> +             output->gen2.active_num--;
>>>>> +
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +
>>>>> +     vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
>>>>> +
>>>>> +     return;
>>>>> +
>>>>> +out_unlock:
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +}
>>>>> +
>>>>> +/*
>>>>> + * vfe_queue_buffer - Add empty buffer
>>>>> + * @vid: Video device structure
>>>>> + * @buf: Buffer to be enqueued
>>>>> + *
>>>>> + * Add an empty buffer - depending on the current number of buffers it will be
>>>>> + * put in pending buffer queue or directly given to the hardware to be filled.
>>>>> + *
>>>>> + * Return 0 on success or a negative error code otherwise
>>>>> + */
>>>>> +static int vfe_queue_buffer(struct camss_video *vid,
>>>>> +                         struct camss_buffer *buf)
>>>>> +{
>>>>> +     struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
>>>>> +     struct vfe_device *vfe = to_vfe(line);
>>>>> +     struct vfe_output *output;
>>>>> +     unsigned long flags;
>>>>> +
>>>>> +     output = &line->output;
>>>>> +
>>>>> +     spin_lock_irqsave(&vfe->output_lock, flags);
>>>>> +
>>>>> +     if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
>>>>> +             output->buf[output->gen2.active_num++] = buf;
>>>>> +             vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
>>>>> +     } else {
>>>>> +             vfe_buf_add_pending(output, buf);
>>>>> +     }
>>>>> +
>>>>> +     spin_unlock_irqrestore(&vfe->output_lock, flags);
>>>>> +
>>>>> +     return 0;
>>>>> +}
>>>>> +
>>>>> +const struct vfe_isr_ops vfe_isr_ops_170 = {
>>>>> +     .reset_ack = vfe_isr_reset_ack,
>>>>> +     .halt_ack = vfe_isr_halt_ack,
>>>>> +     .reg_update = vfe_isr_reg_update,
>>>>> +     .sof = vfe_isr_sof,
>>>>> +     .comp_done = vfe_isr_comp_done,
>>>>> +     .wm_done = vfe_isr_wm_done,
>>>>> +};
>>>>> +
>>>>> +static const struct camss_video_ops vfe_video_ops_170 = {
>>>>> +     .queue_buffer = vfe_queue_buffer,
>>>>> +     .flush_buffers = vfe_flush_buffers,
>>>>> +};
>>>>> +
>>>>> +static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
>>>>> +{
>>>>> +     vfe->isr_ops = vfe_isr_ops_170;
>>>>> +     vfe->video_ops = vfe_video_ops_170;
>>>>> +
>>>>> +     vfe->line_num = VFE_LINE_NUM_GEN2;
>>>>> +}
>>>>> +
>>>>> +const struct vfe_hw_ops vfe_ops_170 = {
>>>>> +     .global_reset = vfe_global_reset,
>>>>> +     .hw_version_read = vfe_hw_version_read,
>>>>> +     .isr_read = vfe_isr_read,
>>>>> +     .isr = vfe_isr,
>>>>> +     .reg_update_clear = vfe_reg_update_clear,
>>>>> +     .reg_update = vfe_reg_update,
>>>>> +     .subdev_init = vfe_subdev_init,
>>>>> +     .vfe_disable = vfe_disable,
>>>>> +     .vfe_enable = vfe_enable,
>>>>> +     .vfe_halt = vfe_halt,
>>>>> +     .violation_read = vfe_violation_read,
>>>>> +};
>>>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
>>>>> index 375843bd16af..6fafeb8a5484 100644
>>>>> --- a/drivers/media/platform/qcom/camss/camss-vfe.c
>>>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.c
>>>>> @@ -96,6 +96,32 @@ static const struct vfe_format formats_pix_8x96[] = {
>>>>>         { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
>>>>>     };
>>>>>
>>>>> +static const struct vfe_format formats_rdi_845[] = {
>>>>> +     { MEDIA_BUS_FMT_UYVY8_2X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_VYUY8_2X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_YUYV8_2X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_YVYU8_2X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
>>>>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
>>>>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
>>>>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
>>>>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
>>>>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },
>>>>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
>>>>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
>>>>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
>>>>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
>>>>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
>>>>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
>>>>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
>>>>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
>>>>> +     { MEDIA_BUS_FMT_Y10_1X10, 10 },
>>>>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
>>>>> +};
>>>>> +
>>>>>     /*
>>>>>      * vfe_get_bpp - map media bus format to bits per pixel
>>>>>      * @formats: supported media bus formats array
>>>>> @@ -192,7 +218,8 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>>>>>                         return sink_code;
>>>>>                 }
>>>>>         else if (vfe->camss->version == CAMSS_8x96 ||
>>>>> -              vfe->camss->version == CAMSS_660)
>>>>> +              vfe->camss->version == CAMSS_660 ||
>>>>> +              vfe->camss->version == CAMSS_845)
>>>>>                 switch (sink_code) {
>>>>>                 case MEDIA_BUS_FMT_YUYV8_2X8:
>>>>>                 {
>>>>> @@ -256,13 +283,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
>>>>>                 return 0;
>>>>>     }
>>>>>
>>>>> -/*
>>>>> - * vfe_reset - Trigger reset on VFE module and wait to complete
>>>>> - * @vfe: VFE device
>>>>> - *
>>>>> - * Return 0 on success or a negative error code otherwise
>>>>> - */
>>>>> -static int vfe_reset(struct vfe_device *vfe)
>>>>> +int vfe_reset(struct vfe_device *vfe)
>>>>>     {
>>>>>         unsigned long time;
>>>>>
>>>>> @@ -429,7 +450,8 @@ static int vfe_set_clock_rates(struct vfe_device *vfe)
>>>>>                 struct camss_clock *clock = &vfe->clock[i];
>>>>>
>>>>>                 if (!strcmp(clock->name, "vfe0") ||
>>>>> -                 !strcmp(clock->name, "vfe1")) {
>>>>> +                 !strcmp(clock->name, "vfe1") ||
>>>>> +                 !strcmp(clock->name, "vfe_lite")) {
>>>>>                         u64 min_rate = 0;
>>>>>                         long rate;
>>>>>
>>>>> @@ -1268,6 +1290,10 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>>>>>         case CAMSS_660:
>>>>>                 vfe->ops = &vfe_ops_4_8;
>>>>>                 break;
>>>>> +
>>>>> +     case CAMSS_845:
>>>>> +             vfe->ops = &vfe_ops_170;
>>>>> +             break;
>>>>>         default:
>>>>>                 return -EINVAL;
>>>>>         }
>>>>> @@ -1379,6 +1405,9 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
>>>>>                                 l->formats = formats_rdi_8x96;
>>>>>                                 l->nformats = ARRAY_SIZE(formats_rdi_8x96);
>>>>>                         }
>>>>> +             } else if (camss->version == CAMSS_845) {
>>>>> +                     l->formats = formats_rdi_845;
>>>>> +                     l->nformats = ARRAY_SIZE(formats_rdi_845);
>>>>>                 } else {
>>>>>                         return -EINVAL;
>>>>>                 }
>>>>> diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
>>>>> index aad5dc74c2c0..29b3d930ffc6 100644
>>>>> --- a/drivers/media/platform/qcom/camss/camss-vfe.h
>>>>> +++ b/drivers/media/platform/qcom/camss/camss-vfe.h
>>>>> @@ -19,7 +19,6 @@
>>>>>     #include "camss-video.h"
>>>>>     #include "camss-vfe-gen1.h"
>>>>>
>>>>> -
>>>>>     #define MSM_VFE_PAD_SINK 0
>>>>>     #define MSM_VFE_PAD_SRC 1
>>>>>     #define MSM_VFE_PADS_NUM 2
>>>>> @@ -38,14 +37,14 @@
>>>>>     #define to_vfe(ptr_line)    \
>>>>>         container_of(vfe_line_array(ptr_line), struct vfe_device, line)
>>>>>
>>>>> -
>>>>>     enum vfe_output_state {
>>>>>         VFE_OUTPUT_OFF,
>>>>>         VFE_OUTPUT_RESERVED,
>>>>>         VFE_OUTPUT_SINGLE,
>>>>>         VFE_OUTPUT_CONTINUOUS,
>>>>>         VFE_OUTPUT_IDLE,
>>>>> -     VFE_OUTPUT_STOPPING
>>>>> +     VFE_OUTPUT_STOPPING,
>>>>> +     VFE_OUTPUT_ON,
>>>>>     };
>>>>>
>>>>>     enum vfe_line_id {
>>>>> @@ -53,6 +52,7 @@ enum vfe_line_id {
>>>>>         VFE_LINE_RDI0 = 0,
>>>>>         VFE_LINE_RDI1 = 1,
>>>>>         VFE_LINE_RDI2 = 2,
>>>>> +     VFE_LINE_NUM_GEN2 = 3,
>>>>>         VFE_LINE_PIX = 3,
>>>>>         VFE_LINE_NUM_GEN1 = 4,
>>>>>         VFE_LINE_NUM_MAX = 4
>>>>> @@ -73,6 +73,9 @@ struct vfe_output {
>>>>>                         int active_buf;
>>>>>                         int wait_sof;
>>>>>                 } gen1;
>>>>> +             struct {
>>>>> +                     int active_num;
>>>>> +             } gen2;
>>>>>         };
>>>>>         enum vfe_output_state state;
>>>>>         unsigned int sequence;
>>>>> @@ -171,14 +174,6 @@ void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)
>>>>>
>>>>>     struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
>>>>>
>>>>> -/*
>>>>> - * vfe_disable - Disable streaming on VFE line
>>>>> - * @line: VFE line
>>>>> - *
>>>>> - * Return 0 on success or a negative error code otherwise
>>>>> - */
>>>>> -int vfe_disable(struct vfe_line *line);
>>>>> -
>>>>>     int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
>>>>>
>>>>>     /*
>>>>> @@ -193,8 +188,17 @@ int vfe_put_output(struct vfe_line *line);
>>>>>     int vfe_release_wm(struct vfe_device *vfe, u8 wm);
>>>>>     int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
>>>>>
>>>>> +/*
>>>>> + * vfe_reset - Trigger reset on VFE module and wait to complete
>>>>> + * @vfe: VFE device
>>>>> + *
>>>>> + * Return 0 on success or a negative error code otherwise
>>>>> + */
>>>>> +int vfe_reset(struct vfe_device *vfe);
>>>>> +
>>>>>     extern const struct vfe_hw_ops vfe_ops_4_1;
>>>>>     extern const struct vfe_hw_ops vfe_ops_4_7;
>>>>>     extern const struct vfe_hw_ops vfe_ops_4_8;
>>>>> +extern const struct vfe_hw_ops vfe_ops_170;
>>>>>
>>>>>     #endif /* QC_MSM_CAMSS_VFE_H */
>>>>> diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
>>>>> index 97cea7c4d769..f282275af626 100644
>>>>> --- a/drivers/media/platform/qcom/camss/camss-video.c
>>>>> +++ b/drivers/media/platform/qcom/camss/camss-video.c
>>>>> @@ -133,6 +133,55 @@ static const struct camss_format_info formats_rdi_8x96[] = {
>>>>>           { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>>>     };
>>>>>
>>>>> +static const struct camss_format_info formats_rdi_845[] = {
>>>>> +     { MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>>> +     { MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>>> +     { MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>>> +     { MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>>> +     { MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>>>> +     { MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>>>> +     { MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>>>> +     { MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 8 } },
>>>>> +     { MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>>>> +     { MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>>>> +     { MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>>>> +     { MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>>>> +     { MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>>> +     { MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>>>> +     { MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>>>> +     { MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>>>> +     { MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 12 } },
>>>>> +     { MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>>>> +     { MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>>>> +     { MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>>>> +     { MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 14 } },
>>>>> +     { MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 10 } },
>>>>> +     { MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
>>>>> +       { { 1, 1 } }, { { 1, 1 } }, { 16 } },
>>>>> +};
>>>>> +
>>>>>     static const struct camss_format_info formats_pix_8x16[] = {
>>>>>         { MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
>>>>>           { { 1, 1 } }, { { 2, 3 } }, { 8 } },
>>>>> @@ -960,6 +1009,9 @@ int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
>>>>>                         video->formats = formats_rdi_8x96;
>>>>>                         video->nformats = ARRAY_SIZE(formats_rdi_8x96);
>>>>>                 }
>>>>> +     }  else if (video->camss->version == CAMSS_845) {
>>>>> +             video->formats = formats_rdi_845;
>>>>> +             video->nformats = ARRAY_SIZE(formats_rdi_845);
>>>>>         } else {
>>>>>                 ret = -EINVAL;
>>>>>                 goto error_video_register;
>>>>> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
>>>>> index 6c6f1e59ccd8..0e006def1996 100644
>>>>> --- a/drivers/media/platform/qcom/camss/camss.c
>>>>> +++ b/drivers/media/platform/qcom/camss/camss.c
>>>>> @@ -465,6 +465,67 @@ static const struct resources vfe_res_660[] = {
>>>>>         }
>>>>>     };
>>>>>
>>>>> +static const struct resources vfe_res_845[] = {
>>>>> +     /* VFE0 */
>>>>> +     {
>>>>> +             .regulator = { NULL },
>>>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>>>> +                             "soc_ahb", "vfe0", "vfe0_axi",
>>>>> +                             "vfe0_src", "csi0",
>>>>> +                             "csi0_src"},
>>>>> +             .clock_rate = { { 0 },
>>>>> +                             { 0 },
>>>>> +                             { 80000000 },
>>>>> +                             { 0 },
>>>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>>>> +                             { 0 },
>>>>> +                             { 320000000 },
>>>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>>>> +                             { 384000000 } },
>>>>> +             .reg = { "vfe0" },
>>>>> +             .interrupt = { "vfe0" }
>>>>> +     },
>>>>> +
>>>>> +     /* VFE1 */
>>>>> +     {
>>>>> +             .regulator = { NULL },
>>>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>>>> +                             "soc_ahb", "vfe1", "vfe1_axi",
>>>>> +                             "vfe1_src", "csi1",
>>>>> +                             "csi1_src"},
>>>>> +             .clock_rate = { { 0 },
>>>>> +                             { 0 },
>>>>> +                             { 80000000 },
>>>>> +                             { 0 },
>>>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>>>> +                             { 0 },
>>>>> +                             { 320000000 },
>>>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>>>> +                             { 384000000 } },
>>>>> +             .reg = { "vfe1" },
>>>>> +             .interrupt = { "vfe1" }
>>>>> +     },
>>>>> +
>>>>> +     /* VFE-lite */
>>>>> +     {
>>>>> +             .regulator = { NULL },
>>>>> +             .clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
>>>>> +                             "soc_ahb", "vfe_lite",
>>>>> +                             "vfe_lite_src", "csi2",
>>>>> +                             "csi2_src"},
>>>>> +             .clock_rate = { { 0 },
>>>>> +                             { 0 },
>>>>> +                             { 80000000 },
>>>>> +                             { 0 },
>>>>> +                             { 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
>>>>> +                             { 320000000 },
>>>>> +                             { 19200000, 75000000, 384000000, 538666667 },
>>>>> +                             { 384000000 } },
>>>>> +             .reg = { "vfe_lite" },
>>>>> +             .interrupt = { "vfe_lite" }
>>>>> +     }
>>>>> +};
>>>>> +
>>>>>     /*
>>>>>      * camss_add_clock_margin - Add margin to clock frequency rate
>>>>>      * @rate: Clock frequency rate
>>>>>
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 940c0ae3e003..052c4f405fa3 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -11,6 +11,7 @@  qcom-camss-objs += \
 		camss-vfe-4-1.o \
 		camss-vfe-4-7.o \
 		camss-vfe-4-8.o \
+		camss-vfe-170.o \
 		camss-vfe-gen1.o \
 		camss-vfe.o \
 		camss-video.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-170.c b/drivers/media/platform/qcom/camss/camss-vfe-170.c
new file mode 100644
index 000000000000..c4991b1f22f8
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-170.c
@@ -0,0 +1,790 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-4-7.c
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v4.7
+ *
+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2015-2018 Linaro Ltd.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+
+#define VFE_HW_VERSION				(0x000)
+
+#define VFE_GLOBAL_RESET_CMD			(0x018)
+#define		GLOBAL_RESET_CMD_CORE		BIT(0)
+#define		GLOBAL_RESET_CMD_CAMIF		BIT(1)
+#define		GLOBAL_RESET_CMD_BUS		BIT(2)
+#define		GLOBAL_RESET_CMD_BUS_BDG	BIT(3)
+#define		GLOBAL_RESET_CMD_REGISTER	BIT(4)
+#define		GLOBAL_RESET_CMD_PM		BIT(5)
+#define		GLOBAL_RESET_CMD_BUS_MISR	BIT(6)
+#define		GLOBAL_RESET_CMD_TESTGEN	BIT(7)
+#define		GLOBAL_RESET_CMD_DSP		BIT(8)
+#define		GLOBAL_RESET_CMD_IDLE_CGC	BIT(9)
+#define		GLOBAL_RESET_CMD_RDI0		BIT(10)
+#define		GLOBAL_RESET_CMD_RDI1		BIT(11)
+#define		GLOBAL_RESET_CMD_RDI2		BIT(12)
+#define		GLOBAL_RESET_CMD_RDI3		BIT(13)
+#define		GLOBAL_RESET_CMD_VFE_DOMAIN	BIT(30)
+#define		GLOBAL_RESET_CMD_RESET_BYPASS	BIT(31)
+
+
+#define VFE_CORE_CFG				(0x050)
+#define		CFG_PIXEL_PATTERN_YCBYCR	(0x4)
+#define		CFG_PIXEL_PATTERN_YCRYCB	(0x5)
+#define		CFG_PIXEL_PATTERN_CBYCRY	(0x6)
+#define		CFG_PIXEL_PATTERN_CRYCBY	(0x7)
+#define		CFG_COMPOSITE_REG_UPDATE_EN	BIT(4)
+
+#define VFE_IRQ_CMD				(0x058)
+#define		CMD_GLOBAL_CLEAR		BIT(0)
+
+#define VFE_IRQ_MASK_0					(0x05c)
+#define		MASK_0_CAMIF_SOF			BIT(0)
+#define		MASK_0_CAMIF_EOF			BIT(1)
+#define		MASK_0_RDI_REG_UPDATE(n)		BIT((n) + 5)
+#define		MASK_0_IMAGE_MASTER_n_PING_PONG(n)	BIT((n) + 8)
+#define		MASK_0_IMAGE_COMPOSITE_DONE_n(n)	BIT((n) + 25)
+#define		MASK_0_RESET_ACK			BIT(31)
+
+#define VFE_IRQ_MASK_1					(0x060)
+#define		MASK_1_CAMIF_ERROR			BIT(0)
+#define		MASK_1_VIOLATION			BIT(7)
+#define		MASK_1_BUS_BDG_HALT_ACK			BIT(8)
+#define		MASK_1_IMAGE_MASTER_n_BUS_OVERFLOW(n)	BIT((n) + 9)
+#define		MASK_1_RDI_SOF(n)			BIT((n) + 29)
+
+#define VFE_IRQ_CLEAR_0					(0x064)
+#define VFE_IRQ_CLEAR_1					(0x068)
+
+#define VFE_IRQ_STATUS_0				(0x06c)
+#define		STATUS_0_CAMIF_SOF			BIT(0)
+#define		STATUS_0_RDI_REG_UPDATE(n)		BIT((n) + 5)
+#define		STATUS_0_IMAGE_MASTER_PING_PONG(n)	BIT((n) + 8)
+#define		STATUS_0_IMAGE_COMPOSITE_DONE(n)	BIT((n) + 25)
+#define		STATUS_0_RESET_ACK			BIT(31)
+
+#define VFE_IRQ_STATUS_1				(0x070)
+#define		STATUS_1_VIOLATION			BIT(7)
+#define		STATUS_1_BUS_BDG_HALT_ACK		BIT(8)
+#define		STATUS_1_RDI_SOF(n)			BIT((n) + 27)
+
+#define VFE_VIOLATION_STATUS			(0x07c)
+
+#define VFE_CAMIF_CMD				(0x478)
+#define		CMD_CLEAR_CAMIF_STATUS		BIT(2)
+
+#define VFE_CAMIF_CFG				(0x47c)
+#define		CFG_VSYNC_SYNC_EDGE		(0)
+#define			VSYNC_ACTIVE_HIGH	(0)
+#define			VSYNC_ACTIVE_LOW	(1)
+#define		CFG_HSYNC_SYNC_EDGE		(1)
+#define			HSYNC_ACTIVE_HIGH	(0)
+#define			HSYNC_ACTIVE_LOW	(1)
+#define		CFG_VFE_SUBSAMPLE_ENABLE	BIT(4)
+#define		CFG_BUS_SUBSAMPLE_ENABLE	BIT(5)
+#define		CFG_VFE_OUTPUT_EN		BIT(6)
+#define		CFG_BUS_OUTPUT_EN		BIT(7)
+#define		CFG_BINNING_EN			BIT(9)
+#define		CFG_FRAME_BASED_EN		BIT(10)
+#define		CFG_RAW_CROP_EN			BIT(22)
+
+// XXX different, don't exist in TITAN register docs
+#define VFE_0_CAMIF_FRAME_CFG			0x484
+#define VFE_0_CAMIF_WINDOW_WIDTH_CFG		0x488
+#define VFE_0_CAMIF_WINDOW_HEIGHT_CFG		0x48c
+#define VFE_0_CAMIF_SUBSAMPLE_CFG		0x490
+#define VFE_0_CAMIF_IRQ_FRAMEDROP_PATTERN	0x498
+#define VFE_0_CAMIF_IRQ_SUBSAMPLE_PATTERN	0x49c
+#define VFE_0_CAMIF_STATUS			0x4a4
+#define VFE_0_CAMIF_STATUS_HALT			BIT(31)
+#define CAMIF_TIMEOUT_SLEEP_US 1000
+#define CAMIF_TIMEOUT_ALL_US 1000000
+
+#define VFE_REG_UPDATE_CMD			(0x4ac)
+#define		REG_UPDATE_RDI(n)		BIT(1 + (n))
+
+
+#define VFE_BUS_IRQ_MASK(n)		(0x2044 + (n) * 4)
+#define VFE_BUS_IRQ_CLEAR(n)		(0x2050 + (n) * 4)
+
+#define VFE_BUS_IRQ_STATUS(n)		(0x205c + (n) * 4)
+#define		STATUS0_COMP_RESET_DONE		BIT(0)
+#define		STATUS0_COMP_REG_UPDATE0_DONE	BIT(1)
+#define		STATUS0_COMP_REG_UPDATE1_DONE	BIT(2)
+#define		STATUS0_COMP_REG_UPDATE2_DONE	BIT(3)
+#define		STATUS0_COMP_REG_UPDATE3_DONE	BIT(4)
+#define		STATUS0_COMP_REG_UPDATE_DONE(n)	BIT(n + 1)
+#define		STATUS0_COMP0_BUF_DONE		BIT(5)
+#define		STATUS0_COMP1_BUF_DONE		BIT(6)
+#define		STATUS0_COMP2_BUF_DONE		BIT(7)
+#define		STATUS0_COMP3_BUF_DONE		BIT(8)
+#define		STATUS0_COMP4_BUF_DONE		BIT(9)
+#define		STATUS0_COMP5_BUF_DONE		BIT(10)
+#define		STATUS0_COMP_BUF_DONE(n)	BIT(n + 5)
+#define		STATUS0_COMP_ERROR		BIT(11)
+#define		STATUS0_COMP_OVERWRITE		BIT(12)
+#define		STATUS0_OVERFLOW		BIT(13)
+#define		STATUS0_VIOLATION		BIT(14)
+/* WM_CLIENT_BUF_DONE defined for buffers 0:19 */
+#define		STATUS1_WM_CLIENT_BUF_DONE(n)		BIT(n)
+#define		STATUS1_EARLY_DONE			BIT(24)
+#define		STATUS2_DUAL_COMP0_BUF_DONE		BIT(0)
+#define		STATUS2_DUAL_COMP1_BUF_DONE		BIT(1)
+#define		STATUS2_DUAL_COMP2_BUF_DONE		BIT(2)
+#define		STATUS2_DUAL_COMP3_BUF_DONE		BIT(3)
+#define		STATUS2_DUAL_COMP4_BUF_DONE		BIT(4)
+#define		STATUS2_DUAL_COMP5_BUF_DONE		BIT(5)
+#define		STATUS2_DUAL_COMP_BUF_DONE(n)		BIT(n)
+#define		STATUS2_DUAL_COMP_ERROR			BIT(6)
+#define		STATUS2_DUAL_COMP_OVERWRITE		BIT(7)
+
+#define VFE_BUS_IRQ_CLEAR_GLOBAL		(0x2068)
+
+#define VFE_BUS_WM_DEBUG_STATUS_CFG		(0x226c)
+#define		DEBUG_STATUS_CFG_STATUS0(n)	BIT(n)
+#define		DEBUG_STATUS_CFG_STATUS1(n)	BIT(8+n)
+
+#define VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER	(0x2080)
+
+#define VFE_BUS_WM_ADDR_SYNC_NO_SYNC		(0x2084)
+#define		BUS_VER2_MAX_CLIENTS (24)
+#define		WM_ADDR_NO_SYNC_DEFAULT_VAL \
+				((1 << BUS_VER2_MAX_CLIENTS) - 1)
+
+#define VFE_BUS_WM_CGC_OVERRIDE			(0x200c)
+#define		WM_CGC_OVERRIDE_ALL		(0xFFFFF)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL		(0x211c)
+
+#define VFE_BUS_WM_STATUS0(n)			(0x2200 + (n) * 0x100)
+#define VFE_BUS_WM_STATUS1(n)			(0x2204 + (n) * 0x100)
+#define VFE_BUS_WM_CFG(n)			(0x2208 + (n) * 0x100)
+#define		WM_CFG_EN			(0)
+#define		WM_CFG_MODE			(1)
+#define			MODE_QCOM_PLAIN	(0)
+#define			MODE_MIPI_RAW	(1)
+#define		WM_CFG_VIRTUALFRAME		(2)
+#define VFE_BUS_WM_HEADER_ADDR(n)		(0x220c + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_CFG(n)		(0x2210 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_ADDR(n)		(0x2214 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_ADDR_OFFSET(n)		(0x2218 + (n) * 0x100)
+#define VFE_BUS_WM_BUFFER_WIDTH_CFG(n)		(0x221c + (n) * 0x100)
+#define		WM_BUFFER_DEFAULT_WIDTH		(0xFF01)
+
+#define VFE_BUS_WM_BUFFER_HEIGHT_CFG(n)		(0x2220 + (n) * 0x100)
+#define VFE_BUS_WM_PACKER_CFG(n)		(0x2224 + (n) * 0x100)
+
+#define VFE_BUS_WM_STRIDE(n)			(0x2228 + (n) * 0x100)
+#define		WM_STRIDE_DEFAULT_STRIDE	(0xFF01)
+
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n)	(0x2248 + (n) * 0x100)
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n)	(0x224c + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PERIOD(n)		(0x2250 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PATTERN(n)		(0x2254 + (n) * 0x100)
+#define VFE_BUS_WM_FRAME_INC(n)			(0x2258 + (n) * 0x100)
+#define VFE_BUS_WM_BURST_LIMIT(n)		(0x225c + (n) * 0x100)
+
+
+static void vfe_hw_version_read(struct vfe_device *vfe, struct device *dev)
+{
+	u32 hw_version = readl_relaxed(vfe->base + VFE_HW_VERSION);
+
+	u32 gen = (hw_version >> 28) & 0xF;
+	u32 rev = (hw_version >> 16) & 0xFFF;
+	u32 step = hw_version & 0xFFFF;
+
+	dev_err(dev, "VFE HW Version = %u.%u.%u\n", gen, rev, step);
+}
+
+static inline void vfe_reg_clr(struct vfe_device *vfe, u32 reg, u32 clr_bits)
+{
+	u32 bits = readl_relaxed(vfe->base + reg);
+
+	writel_relaxed(bits & ~clr_bits, vfe->base + reg);
+}
+
+static inline void vfe_reg_set(struct vfe_device *vfe, u32 reg, u32 set_bits)
+{
+	u32 bits = readl_relaxed(vfe->base + reg);
+
+	writel_relaxed(bits | set_bits, vfe->base + reg);
+}
+
+static void vfe_global_reset(struct vfe_device *vfe)
+{
+	u32 reset_bits = GLOBAL_RESET_CMD_CORE		|
+			 GLOBAL_RESET_CMD_CAMIF		|
+			 GLOBAL_RESET_CMD_BUS		|
+			 GLOBAL_RESET_CMD_REGISTER	|
+			 GLOBAL_RESET_CMD_PM		|
+			 GLOBAL_RESET_CMD_BUS_MISR	|
+			 GLOBAL_RESET_CMD_IDLE_CGC	|
+			 GLOBAL_RESET_CMD_RDI0		|
+			 GLOBAL_RESET_CMD_RDI1		|
+			 GLOBAL_RESET_CMD_RDI2;
+
+	writel_relaxed(BIT(31), vfe->base + VFE_IRQ_MASK_0);
+
+	/* Make sure IRQ mask has been written before resetting */
+	wmb();
+
+	writel_relaxed(reset_bits, vfe->base + VFE_GLOBAL_RESET_CMD);
+}
+
+static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
+{
+	u32 val;
+
+	/*Set Debug Registers*/
+	val = DEBUG_STATUS_CFG_STATUS0(1) |
+	      DEBUG_STATUS_CFG_STATUS0(7);
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_DEBUG_STATUS_CFG);
+
+	/* BUS_WM_INPUT_IF_ADDR_SYNC_FRAME_HEADER */
+	writel_relaxed(0, vfe->base + VFE_BUS_WM_ADDR_SYNC_FRAME_HEADER);
+
+	/* no clock gating at bus input */
+	val = WM_CGC_OVERRIDE_ALL;
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
+
+	writel_relaxed(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
+
+	/* if addr_no_sync has default value then config the addr no sync reg */
+	val = WM_ADDR_NO_SYNC_DEFAULT_VAL;
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_ADDR_SYNC_NO_SYNC);
+
+	writel_relaxed(0xf, vfe->base + VFE_BUS_WM_BURST_LIMIT(wm));
+
+	val = WM_BUFFER_DEFAULT_WIDTH;
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_WIDTH_CFG(wm));
+
+	val = 0;
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_BUFFER_HEIGHT_CFG(wm));
+
+	val = 0;
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_PACKER_CFG(wm)); // XXX 1 for PLAIN8?
+
+	/* Configure stride for RDIs */
+	//val = pix->plane_fmt[0].bytesperline;
+	val = WM_STRIDE_DEFAULT_STRIDE;
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_STRIDE(wm));
+
+	/* Enable WM */
+	val = 1 << WM_CFG_EN |
+	      MODE_MIPI_RAW << WM_CFG_MODE;
+	writel_relaxed(val, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
+{
+	/* Disable WM */
+	writel_relaxed(0, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
+			  struct vfe_line *line)
+{
+	struct v4l2_pix_format_mplane *pix =
+		&line->video_out.active_fmt.fmt.pix_mp;
+	u32 stride = pix->plane_fmt[0].bytesperline;
+
+	writel_relaxed(addr, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+	writel_relaxed(stride * pix->height, vfe->base + VFE_BUS_WM_FRAME_INC(wm));
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+	vfe->reg_update |= REG_UPDATE_RDI(line_id);
+
+	/* Enforce ordering between previous reg writes and reg update */
+	wmb();
+
+	writel_relaxed(vfe->reg_update, vfe->base + VFE_REG_UPDATE_CMD);
+
+	/* Enforce ordering between reg update and subsequent reg writes */
+	wmb();
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+					enum vfe_line_id line_id)
+{
+	vfe->reg_update &= ~REG_UPDATE_RDI(line_id);
+}
+
+static void vfe_enable_irq_common(struct vfe_device *vfe)
+{
+	vfe_reg_set(vfe, VFE_IRQ_MASK_0, ~0u);
+	vfe_reg_set(vfe, VFE_IRQ_MASK_1, ~0u);
+
+	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(0));
+	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(1));
+	writel_relaxed(~0u, vfe->base + VFE_BUS_IRQ_MASK(2));
+}
+
+static void vfe_isr_halt_ack(struct vfe_device *vfe)
+{
+	complete(&vfe->halt_complete);
+}
+
+static void vfe_isr_read(struct vfe_device *vfe, u32 *status0, u32 *status1)
+{
+	*status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
+	*status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
+
+	writel_relaxed(*status0, vfe->base + VFE_IRQ_CLEAR_0);
+	writel_relaxed(*status1, vfe->base + VFE_IRQ_CLEAR_1);
+
+	/* Enforce ordering between IRQ Clear and Global IRQ Clear */
+	wmb();
+	writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
+}
+
+static void vfe_violation_read(struct vfe_device *vfe)
+{
+	u32 violation = readl_relaxed(vfe->base + VFE_VIOLATION_STATUS);
+
+	pr_err_ratelimited("VFE: violation = 0x%08x\n", violation);
+}
+
+/*
+ * vfe_isr - VFE module interrupt handler
+ * @irq: Interrupt line
+ * @dev: VFE device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t vfe_isr(int irq, void *dev)
+{
+	struct vfe_device *vfe = dev;
+	u32 status0, status1, vfe_bus_status[3];
+	int i, wm;
+
+	status0 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_0);
+	status1 = readl_relaxed(vfe->base + VFE_IRQ_STATUS_1);
+
+	writel_relaxed(status0, vfe->base + VFE_IRQ_CLEAR_0);
+	writel_relaxed(status1, vfe->base + VFE_IRQ_CLEAR_1);
+
+	for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++) {
+		vfe_bus_status[i] = readl_relaxed(vfe->base + VFE_BUS_IRQ_STATUS(i));
+		writel_relaxed(vfe_bus_status[i], vfe->base + VFE_BUS_IRQ_CLEAR(i));
+	}
+
+	/* Enforce ordering between IRQ reading and interpretation */
+	wmb();
+
+	writel_relaxed(CMD_GLOBAL_CLEAR, vfe->base + VFE_IRQ_CMD);
+	writel_relaxed(1, vfe->base + VFE_BUS_IRQ_CLEAR_GLOBAL);
+
+	if (status0 & STATUS_0_RESET_ACK)
+		vfe->isr_ops.reset_ack(vfe);
+
+	for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
+		if (status0 & STATUS_0_RDI_REG_UPDATE(i))
+			vfe->isr_ops.reg_update(vfe, i);
+
+	for (i = VFE_LINE_RDI0; i <= VFE_LINE_RDI2; i++)
+		if (status0 & STATUS_1_RDI_SOF(i))
+			vfe->isr_ops.sof(vfe, i);
+
+	for (i = 0; i < MSM_VFE_COMPOSITE_IRQ_NUM; i++)
+		if (vfe_bus_status[0] & STATUS0_COMP_BUF_DONE(i))
+			vfe->isr_ops.comp_done(vfe, i);
+
+	for (wm = 0; wm < MSM_VFE_IMAGE_MASTERS_NUM; wm++)
+		if (status0 & BIT(9))
+			if (vfe_bus_status[1] & STATUS1_WM_CLIENT_BUF_DONE(wm))
+				vfe->isr_ops.wm_done(vfe, wm);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * vfe_halt - Trigger halt on VFE module and wait to complete
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_halt(struct vfe_device *vfe)
+{
+	unsigned long time;
+
+	return 0;
+
+	reinit_completion(&vfe->halt_complete);
+
+	time = wait_for_completion_timeout(&vfe->halt_complete,
+		msecs_to_jiffies(VFE_HALT_TIMEOUT_MS));
+	if (!time) {
+		dev_err(vfe->camss->dev, "VFE halt timeout\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int vfe_get_output(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+	struct vfe_output *output;
+	unsigned long flags;
+	int i;
+	int wm_idx;
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	output = &line->output;
+	if (output->state != VFE_OUTPUT_OFF) {
+		dev_err(vfe->camss->dev, "Output is running\n");
+		goto error;
+	}
+
+	output->wm_num = 1;
+
+	for (i = 0; i < output->wm_num; i++) {
+		wm_idx = vfe_reserve_wm(vfe, line->id);
+		if (wm_idx < 0) {
+			dev_err(vfe->camss->dev, "Can not reserve wm\n");
+			goto error_get_wm;
+		}
+		output->wm_idx[i] = wm_idx;
+	}
+
+	output->drop_update_idx = 0;
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return 0;
+
+error_get_wm:
+	for (i--; i >= 0; i--)
+		vfe_release_wm(vfe, output->wm_idx[i]);
+	output->state = VFE_OUTPUT_OFF;
+error:
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return -EINVAL;
+}
+
+static int vfe_enable_output(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+	struct vfe_output *output = &line->output;
+	const struct vfe_hw_ops *ops = vfe->ops;
+	struct media_entity *sensor;
+	unsigned long flags;
+	unsigned int frame_skip = 0;
+	unsigned int i;
+
+	sensor = camss_find_sensor(&line->subdev.entity);
+	if (sensor) {
+		struct v4l2_subdev *subdev = media_entity_to_v4l2_subdev(sensor);
+
+		v4l2_subdev_call(subdev, sensor, g_skip_frames, &frame_skip);
+		/* Max frame skip is 29 frames */
+		if (frame_skip > VFE_FRAME_DROP_VAL - 1)
+			frame_skip = VFE_FRAME_DROP_VAL - 1;
+	}
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	ops->reg_update_clear(vfe, line->id);
+
+	if (output->state != VFE_OUTPUT_OFF) {
+		dev_err(vfe->camss->dev, "Output is not in reserved state %d\n",
+			output->state);
+		spin_unlock_irqrestore(&vfe->output_lock, flags);
+		return -EINVAL;
+	}
+
+	WARN_ON(output->gen2.active_num);
+
+	output->state = VFE_OUTPUT_ON;
+
+	output->sequence = 0;
+	output->wait_reg_update = 0;
+	reinit_completion(&output->reg_update);
+
+	vfe_wm_start(vfe, output->wm_idx[0], line);
+
+	for (i = 0; i < 2; i++) {
+		output->buf[i] = vfe_buf_get_pending(output);
+		if (!output->buf[i])
+			break;
+		output->gen2.active_num++;
+		vfe_wm_update(vfe, output->wm_idx[0], output->buf[i]->addr[0], line);
+	}
+
+	ops->reg_update(vfe, line->id);
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return 0;
+}
+
+static int vfe_disable_output(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+	struct vfe_output *output = &line->output;
+	unsigned long flags;
+	unsigned int i;
+	bool done;
+	int timeout = 0;
+
+	do {
+		spin_lock_irqsave(&vfe->output_lock, flags);
+		done = !output->gen2.active_num;
+		spin_unlock_irqrestore(&vfe->output_lock, flags);
+		usleep_range(10000, 20000);
+
+		if (timeout++ == 100) {
+			dev_err(vfe->camss->dev, "VFE idle timeout - resetting\n");
+			vfe_reset(vfe);
+			output->gen2.active_num = 0;
+			return 0;
+		}
+	} while (!done);
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+	for (i = 0; i < output->wm_num; i++)
+		vfe_wm_stop(vfe, output->wm_idx[i]);
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return 0;
+}
+
+/*
+ * vfe_enable - Enable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_enable(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+	int ret;
+
+	mutex_lock(&vfe->stream_lock);
+
+	if (!vfe->stream_count)
+		vfe_enable_irq_common(vfe);
+
+	vfe->stream_count++;
+
+	mutex_unlock(&vfe->stream_lock);
+
+	ret = vfe_get_output(line);
+	if (ret < 0)
+		goto error_get_output;
+
+	ret = vfe_enable_output(line);
+	if (ret < 0)
+		goto error_enable_output;
+
+	vfe->was_streaming = 1;
+
+	return 0;
+
+
+error_enable_output:
+	vfe_put_output(line);
+
+error_get_output:
+	mutex_lock(&vfe->stream_lock);
+
+	vfe->stream_count--;
+
+	mutex_unlock(&vfe->stream_lock);
+
+	return ret;
+}
+
+/*
+ * vfe_disable - Disable streaming on VFE line
+ * @line: VFE line
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_disable(struct vfe_line *line)
+{
+	struct vfe_device *vfe = to_vfe(line);
+
+	vfe_disable_output(line);
+
+	vfe_put_output(line);
+
+	mutex_lock(&vfe->stream_lock);
+
+	vfe->stream_count--;
+
+	mutex_unlock(&vfe->stream_lock);
+
+	return 0;
+}
+
+/*
+ * vfe_isr_sof - Process start of frame interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_sof(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+
+}
+
+/*
+ * vfe_isr_reg_update - Process reg update interrupt
+ * @vfe: VFE Device
+ * @line_id: VFE line
+ */
+static void vfe_isr_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+	struct vfe_output *output;
+	unsigned long flags;
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+	vfe->ops->reg_update_clear(vfe, line_id);
+
+	output = &vfe->line[line_id].output;
+
+	if (output->wait_reg_update) {
+		output->wait_reg_update = 0;
+		complete(&output->reg_update);
+	}
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_isr_wm_done - Process write master done interrupt
+ * @vfe: VFE Device
+ * @wm: Write master id
+ */
+static void vfe_isr_wm_done(struct vfe_device *vfe, u8 wm)
+{
+	struct vfe_line *line = &vfe->line[vfe->wm_output_map[wm]];
+	struct camss_buffer *ready_buf;
+	struct vfe_output *output;
+	unsigned long flags;
+	u32 index;
+	u64 ts = ktime_get_ns();
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	if (vfe->wm_output_map[wm] == VFE_LINE_NONE) {
+		dev_err_ratelimited(vfe->camss->dev,
+				    "Received wm done for unmapped index\n");
+		goto out_unlock;
+	}
+	output = &vfe->line[vfe->wm_output_map[wm]].output;
+
+	ready_buf = output->buf[0];
+	if (!ready_buf) {
+		dev_err_ratelimited(vfe->camss->dev,
+				    "Missing ready buf %d!\n", output->state);
+		goto out_unlock;
+	}
+
+	ready_buf->vb.vb2_buf.timestamp = ts;
+	ready_buf->vb.sequence = output->sequence++;
+
+	index = 0;
+	output->buf[0] = output->buf[1];
+	if (output->buf[0])
+		index = 1;
+
+	output->buf[index] = vfe_buf_get_pending(output);
+
+	if (output->buf[index])
+		vfe_wm_update(vfe, output->wm_idx[0], output->buf[index]->addr[0], line);
+	else
+		output->gen2.active_num--;
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	vb2_buffer_done(&ready_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+
+	return;
+
+out_unlock:
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+}
+
+/*
+ * vfe_queue_buffer - Add empty buffer
+ * @vid: Video device structure
+ * @buf: Buffer to be enqueued
+ *
+ * Add an empty buffer - depending on the current number of buffers it will be
+ * put in pending buffer queue or directly given to the hardware to be filled.
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int vfe_queue_buffer(struct camss_video *vid,
+			    struct camss_buffer *buf)
+{
+	struct vfe_line *line = container_of(vid, struct vfe_line, video_out);
+	struct vfe_device *vfe = to_vfe(line);
+	struct vfe_output *output;
+	unsigned long flags;
+
+	output = &line->output;
+
+	spin_lock_irqsave(&vfe->output_lock, flags);
+
+	if (output->state == VFE_OUTPUT_ON && output->gen2.active_num < 2) {
+		output->buf[output->gen2.active_num++] = buf;
+		vfe_wm_update(vfe, output->wm_idx[0], buf->addr[0], line);
+	} else {
+		vfe_buf_add_pending(output, buf);
+	}
+
+	spin_unlock_irqrestore(&vfe->output_lock, flags);
+
+	return 0;
+}
+
+const struct vfe_isr_ops vfe_isr_ops_170 = {
+	.reset_ack = vfe_isr_reset_ack,
+	.halt_ack = vfe_isr_halt_ack,
+	.reg_update = vfe_isr_reg_update,
+	.sof = vfe_isr_sof,
+	.comp_done = vfe_isr_comp_done,
+	.wm_done = vfe_isr_wm_done,
+};
+
+static const struct camss_video_ops vfe_video_ops_170 = {
+	.queue_buffer = vfe_queue_buffer,
+	.flush_buffers = vfe_flush_buffers,
+};
+
+static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
+{
+	vfe->isr_ops = vfe_isr_ops_170;
+	vfe->video_ops = vfe_video_ops_170;
+
+	vfe->line_num = VFE_LINE_NUM_GEN2;
+}
+
+const struct vfe_hw_ops vfe_ops_170 = {
+	.global_reset = vfe_global_reset,
+	.hw_version_read = vfe_hw_version_read,
+	.isr_read = vfe_isr_read,
+	.isr = vfe_isr,
+	.reg_update_clear = vfe_reg_update_clear,
+	.reg_update = vfe_reg_update,
+	.subdev_init = vfe_subdev_init,
+	.vfe_disable = vfe_disable,
+	.vfe_enable = vfe_enable,
+	.vfe_halt = vfe_halt,
+	.violation_read = vfe_violation_read,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 375843bd16af..6fafeb8a5484 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -96,6 +96,32 @@  static const struct vfe_format formats_pix_8x96[] = {
 	{ MEDIA_BUS_FMT_YVYU8_2X8, 8 },
 };
 
+static const struct vfe_format formats_rdi_845[] = {
+	{ MEDIA_BUS_FMT_UYVY8_2X8, 8 },
+	{ MEDIA_BUS_FMT_VYUY8_2X8, 8 },
+	{ MEDIA_BUS_FMT_YUYV8_2X8, 8 },
+	{ MEDIA_BUS_FMT_YVYU8_2X8, 8 },
+	{ MEDIA_BUS_FMT_SBGGR8_1X8, 8 },
+	{ MEDIA_BUS_FMT_SGBRG8_1X8, 8 },
+	{ MEDIA_BUS_FMT_SGRBG8_1X8, 8 },
+	{ MEDIA_BUS_FMT_SRGGB8_1X8, 8 },
+	{ MEDIA_BUS_FMT_SBGGR10_1X10, 10 },
+	{ MEDIA_BUS_FMT_SGBRG10_1X10, 10 },
+	{ MEDIA_BUS_FMT_SGRBG10_1X10, 10 },
+	{ MEDIA_BUS_FMT_SRGGB10_1X10, 10 },
+	{ MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, 16 },
+	{ MEDIA_BUS_FMT_SBGGR12_1X12, 12 },
+	{ MEDIA_BUS_FMT_SGBRG12_1X12, 12 },
+	{ MEDIA_BUS_FMT_SGRBG12_1X12, 12 },
+	{ MEDIA_BUS_FMT_SRGGB12_1X12, 12 },
+	{ MEDIA_BUS_FMT_SBGGR14_1X14, 14 },
+	{ MEDIA_BUS_FMT_SGBRG14_1X14, 14 },
+	{ MEDIA_BUS_FMT_SGRBG14_1X14, 14 },
+	{ MEDIA_BUS_FMT_SRGGB14_1X14, 14 },
+	{ MEDIA_BUS_FMT_Y10_1X10, 10 },
+	{ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, 16 },
+};
+
 /*
  * vfe_get_bpp - map media bus format to bits per pixel
  * @formats: supported media bus formats array
@@ -192,7 +218,8 @@  static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
 			return sink_code;
 		}
 	else if (vfe->camss->version == CAMSS_8x96 ||
-		 vfe->camss->version == CAMSS_660)
+		 vfe->camss->version == CAMSS_660 ||
+		 vfe->camss->version == CAMSS_845)
 		switch (sink_code) {
 		case MEDIA_BUS_FMT_YUYV8_2X8:
 		{
@@ -256,13 +283,7 @@  static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
 		return 0;
 }
 
-/*
- * vfe_reset - Trigger reset on VFE module and wait to complete
- * @vfe: VFE device
- *
- * Return 0 on success or a negative error code otherwise
- */
-static int vfe_reset(struct vfe_device *vfe)
+int vfe_reset(struct vfe_device *vfe)
 {
 	unsigned long time;
 
@@ -429,7 +450,8 @@  static int vfe_set_clock_rates(struct vfe_device *vfe)
 		struct camss_clock *clock = &vfe->clock[i];
 
 		if (!strcmp(clock->name, "vfe0") ||
-		    !strcmp(clock->name, "vfe1")) {
+		    !strcmp(clock->name, "vfe1") ||
+		    !strcmp(clock->name, "vfe_lite")) {
 			u64 min_rate = 0;
 			long rate;
 
@@ -1268,6 +1290,10 @@  int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 	case CAMSS_660:
 		vfe->ops = &vfe_ops_4_8;
 		break;
+
+	case CAMSS_845:
+		vfe->ops = &vfe_ops_170;
+		break;
 	default:
 		return -EINVAL;
 	}
@@ -1379,6 +1405,9 @@  int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
 				l->formats = formats_rdi_8x96;
 				l->nformats = ARRAY_SIZE(formats_rdi_8x96);
 			}
+		} else if (camss->version == CAMSS_845) {
+			l->formats = formats_rdi_845;
+			l->nformats = ARRAY_SIZE(formats_rdi_845);
 		} else {
 			return -EINVAL;
 		}
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index aad5dc74c2c0..29b3d930ffc6 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -19,7 +19,6 @@ 
 #include "camss-video.h"
 #include "camss-vfe-gen1.h"
 
-
 #define MSM_VFE_PAD_SINK 0
 #define MSM_VFE_PAD_SRC 1
 #define MSM_VFE_PADS_NUM 2
@@ -38,14 +37,14 @@ 
 #define to_vfe(ptr_line)	\
 	container_of(vfe_line_array(ptr_line), struct vfe_device, line)
 
-
 enum vfe_output_state {
 	VFE_OUTPUT_OFF,
 	VFE_OUTPUT_RESERVED,
 	VFE_OUTPUT_SINGLE,
 	VFE_OUTPUT_CONTINUOUS,
 	VFE_OUTPUT_IDLE,
-	VFE_OUTPUT_STOPPING
+	VFE_OUTPUT_STOPPING,
+	VFE_OUTPUT_ON,
 };
 
 enum vfe_line_id {
@@ -53,6 +52,7 @@  enum vfe_line_id {
 	VFE_LINE_RDI0 = 0,
 	VFE_LINE_RDI1 = 1,
 	VFE_LINE_RDI2 = 2,
+	VFE_LINE_NUM_GEN2 = 3,
 	VFE_LINE_PIX = 3,
 	VFE_LINE_NUM_GEN1 = 4,
 	VFE_LINE_NUM_MAX = 4
@@ -73,6 +73,9 @@  struct vfe_output {
 			int active_buf;
 			int wait_sof;
 		} gen1;
+		struct {
+			int active_num;
+		} gen2;
 	};
 	enum vfe_output_state state;
 	unsigned int sequence;
@@ -171,14 +174,6 @@  void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer)
 
 struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output);
 
-/*
- * vfe_disable - Disable streaming on VFE line
- * @line: VFE line
- *
- * Return 0 on success or a negative error code otherwise
- */
-int vfe_disable(struct vfe_line *line);
-
 int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state);
 
 /*
@@ -193,8 +188,17 @@  int vfe_put_output(struct vfe_line *line);
 int vfe_release_wm(struct vfe_device *vfe, u8 wm);
 int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id);
 
+/*
+ * vfe_reset - Trigger reset on VFE module and wait to complete
+ * @vfe: VFE device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+int vfe_reset(struct vfe_device *vfe);
+
 extern const struct vfe_hw_ops vfe_ops_4_1;
 extern const struct vfe_hw_ops vfe_ops_4_7;
 extern const struct vfe_hw_ops vfe_ops_4_8;
+extern const struct vfe_hw_ops vfe_ops_170;
 
 #endif /* QC_MSM_CAMSS_VFE_H */
diff --git a/drivers/media/platform/qcom/camss/camss-video.c b/drivers/media/platform/qcom/camss/camss-video.c
index 97cea7c4d769..f282275af626 100644
--- a/drivers/media/platform/qcom/camss/camss-video.c
+++ b/drivers/media/platform/qcom/camss/camss-video.c
@@ -133,6 +133,55 @@  static const struct camss_format_info formats_rdi_8x96[] = {
 	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
 };
 
+static const struct camss_format_info formats_rdi_845[] = {
+	{ MEDIA_BUS_FMT_UYVY8_2X8, V4L2_PIX_FMT_UYVY, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+	{ MEDIA_BUS_FMT_VYUY8_2X8, V4L2_PIX_FMT_VYUY, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+	{ MEDIA_BUS_FMT_YUYV8_2X8, V4L2_PIX_FMT_YUYV, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+	{ MEDIA_BUS_FMT_YVYU8_2X8, V4L2_PIX_FMT_YVYU, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+	{ MEDIA_BUS_FMT_SBGGR8_1X8, V4L2_PIX_FMT_SBGGR8, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+	{ MEDIA_BUS_FMT_SGBRG8_1X8, V4L2_PIX_FMT_SGBRG8, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+	{ MEDIA_BUS_FMT_SGRBG8_1X8, V4L2_PIX_FMT_SGRBG8, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+	{ MEDIA_BUS_FMT_SRGGB8_1X8, V4L2_PIX_FMT_SRGGB8, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 8 } },
+	{ MEDIA_BUS_FMT_SBGGR10_1X10, V4L2_PIX_FMT_SBGGR10P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+	{ MEDIA_BUS_FMT_SGBRG10_1X10, V4L2_PIX_FMT_SGBRG10P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+	{ MEDIA_BUS_FMT_SGRBG10_1X10, V4L2_PIX_FMT_SGRBG10P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+	{ MEDIA_BUS_FMT_SRGGB10_1X10, V4L2_PIX_FMT_SRGGB10P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+	{ MEDIA_BUS_FMT_SBGGR10_2X8_PADHI_LE, V4L2_PIX_FMT_SBGGR10, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+	{ MEDIA_BUS_FMT_SBGGR12_1X12, V4L2_PIX_FMT_SBGGR12P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+	{ MEDIA_BUS_FMT_SGBRG12_1X12, V4L2_PIX_FMT_SGBRG12P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+	{ MEDIA_BUS_FMT_SGRBG12_1X12, V4L2_PIX_FMT_SGRBG12P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+	{ MEDIA_BUS_FMT_SRGGB12_1X12, V4L2_PIX_FMT_SRGGB12P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 12 } },
+	{ MEDIA_BUS_FMT_SBGGR14_1X14, V4L2_PIX_FMT_SBGGR14P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+	{ MEDIA_BUS_FMT_SGBRG14_1X14, V4L2_PIX_FMT_SGBRG14P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+	{ MEDIA_BUS_FMT_SGRBG14_1X14, V4L2_PIX_FMT_SGRBG14P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+	{ MEDIA_BUS_FMT_SRGGB14_1X14, V4L2_PIX_FMT_SRGGB14P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 14 } },
+	{ MEDIA_BUS_FMT_Y10_1X10, V4L2_PIX_FMT_Y10P, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 10 } },
+	{ MEDIA_BUS_FMT_Y10_2X8_PADHI_LE, V4L2_PIX_FMT_Y10, 1,
+	  { { 1, 1 } }, { { 1, 1 } }, { 16 } },
+};
+
 static const struct camss_format_info formats_pix_8x16[] = {
 	{ MEDIA_BUS_FMT_YUYV8_1_5X8, V4L2_PIX_FMT_NV12, 1,
 	  { { 1, 1 } }, { { 2, 3 } }, { 8 } },
@@ -960,6 +1009,9 @@  int msm_video_register(struct camss_video *video, struct v4l2_device *v4l2_dev,
 			video->formats = formats_rdi_8x96;
 			video->nformats = ARRAY_SIZE(formats_rdi_8x96);
 		}
+	}  else if (video->camss->version == CAMSS_845) {
+		video->formats = formats_rdi_845;
+		video->nformats = ARRAY_SIZE(formats_rdi_845);
 	} else {
 		ret = -EINVAL;
 		goto error_video_register;
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 6c6f1e59ccd8..0e006def1996 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -465,6 +465,67 @@  static const struct resources vfe_res_660[] = {
 	}
 };
 
+static const struct resources vfe_res_845[] = {
+	/* VFE0 */
+	{
+		.regulator = { NULL },
+		.clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+				"soc_ahb", "vfe0", "vfe0_axi",
+				"vfe0_src", "csi0",
+				"csi0_src"},
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 80000000 },
+				{ 0 },
+				{ 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 0 },
+				{ 320000000 },
+				{ 19200000, 75000000, 384000000, 538666667 },
+				{ 384000000 } },
+		.reg = { "vfe0" },
+		.interrupt = { "vfe0" }
+	},
+
+	/* VFE1 */
+	{
+		.regulator = { NULL },
+		.clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+				"soc_ahb", "vfe1", "vfe1_axi",
+				"vfe1_src", "csi1",
+				"csi1_src"},
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 80000000 },
+				{ 0 },
+				{ 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 0 },
+				{ 320000000 },
+				{ 19200000, 75000000, 384000000, 538666667 },
+				{ 384000000 } },
+		.reg = { "vfe1" },
+		.interrupt = { "vfe1" }
+	},
+
+	/* VFE-lite */
+	{
+		.regulator = { NULL },
+		.clock = { "camnoc_axi", "cpas_ahb", "slow_ahb_src",
+				"soc_ahb", "vfe_lite",
+				"vfe_lite_src", "csi2",
+				"csi2_src"},
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 80000000 },
+				{ 0 },
+				{ 19200000, 100000000, 320000000, 404000000, 480000000, 600000000 },
+				{ 320000000 },
+				{ 19200000, 75000000, 384000000, 538666667 },
+				{ 384000000 } },
+		.reg = { "vfe_lite" },
+		.interrupt = { "vfe_lite" }
+	}
+};
+
 /*
  * camss_add_clock_margin - Add margin to clock frequency rate
  * @rate: Clock frequency rate