diff mbox

[v3,3/4] ARM: dts: apq8064: Add USB OTG support

Message ID 1412154409-2828-1-git-send-email-srinivas.kandagatla@linaro.org
State New
Headers show

Commit Message

Srinivas Kandagatla Oct. 1, 2014, 9:06 a.m. UTC 
This patch adds USB OTG support on USB1 of APQ8064 SOC.
Tested on IFC6410 with ethernet gadget.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ++++++++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi        | 32 ++++++++++++++++++++++++++++++
 2 files changed, 54 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 96c7b2c..3e2c777 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -52,12 +52,25 @@ 
 				regulator-max-microvolt = <3300000>;
 			};
 
+			pm8921_l4: pm8921-l4 {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
 			pm8921_l23: pm8921-l23 {
 				regulator-min-microvolt = <1700000>;
 				regulator-max-microvolt = <1900000>;
 			};
 		};
 
+		/* OTG */
+		usb1_phy: phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
 		usb3_phy: phy@12520000 {
 			status		= "okay";
 			vddcx-supply	= <&pm8921_s3>;
@@ -72,6 +85,15 @@ 
 			v1p8-supply	= <&pm8921_l23>;
 		};
 
+		gadget1: gadget@12500000 {
+			status = "okay";
+		};
+
+		/* OTG */
+		usb1: usb@12500000 {
+			status = "okay";
+		};
+
 		usb3: usb@12520000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index e33eb03..c251c72 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -488,6 +488,21 @@ 
 			};
 		};
 
+		usb1_phy: phy@12500000 {
+			compatible	= "qcom,usb-otg-ci";
+			reg		= <0x12500000 0x400>;
+			interrupts	= <0 100 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			dr_mode		= "host";
+
+			clocks		= <&gcc USB_HS1_XCVR_CLK>,
+					  <&gcc USB_HS1_H_CLK>;
+			clock-names	= "core", "iface";
+
+			resets		= <&gcc USB_HS1_RESET>;
+			reset-names	= "link";
+		};
+
 		usb3_phy: phy@12520000 {
 			compatible	= "qcom,usb-otg-ci";
 			reg		= <0x12520000 0x400>;
@@ -518,6 +533,23 @@ 
 			reset-names	= "link";
 		};
 
+		gadget1: gadget@12500000 {
+			compatible	= "qcom,ci-hdrc";
+			reg		= <0x12500000 0x400>;
+			status		= "disabled";
+			dr_mode		= "peripheral";
+			interrupts	= <0 100 IRQ_TYPE_NONE>;
+			usb-phy		= <&usb1_phy>;
+		};
+
+		usb1: usb@12500000 {
+			compatible	= "qcom,ehci-host";
+			reg		= <0x12500000 0x400>;
+			interrupts	= <0 100 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			usb-phy		= <&usb1_phy>;
+		};
+
 		usb3: usb@12520000 {
 			compatible	= "qcom,ehci-host";
 			reg		= <0x12520000 0x400>;