@@ -1567,7 +1567,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1274, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1275, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ZTE_VENDOR_ID, 0x1275), .driver_info = RSVD(3) | RSVD(4) }, /* ZTE P685M */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1276, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1277, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1278, 0xff, 0xff, 0xff) },
This patch prepares for qmi_wwan driver support for the device. Previously "option" driver mapped itself to interfaces 0 and 3 (matching ff/ff/ff), while interface 3 is in fact a QMI port. Interfaces 1 and 2 (matching ff/00/00) expose AT commands, and weren't supported previously at all. Without this patch, a possible conflict would exist if device ID was added to qmi_wwan driver for interface 3. Update and simplify device ID to match interfaces 0-2 directly, to expose QCDM (0), PCUI (1), and modem (2) ports and avoid conflict with QMI (3), and ADB (4). The modem is used inside ZTE MF283+ router and carriers identify it as such. Interface mapping is: 0: QCDM, 1: AT (PCUI), 2: AT (Modem), 3: QMI, 4: ADB T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1275 Rev=f0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE Technologies MSM S: SerialNumber=P685M510ZTED0000CP&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&0 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: Johan Hovold <johan@kernel.org> Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> --- v3: No changes to contents of the patch. Resend as separate patch to be merged through USB subsystem, the following patch for qmi_wwan will go through netdev tree after this is merged. Updated commit description, added note about possible qmi_wwan conflict. v2: Blacklist ports 3-4 and simplify device ID, as suggested by Lars Melin. drivers/usb/serial/option.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)