| Message ID | 1612693435-31418-4-git-send-email-shengjiu.wang@nxp.com |
|---|---|
| State | New |
| Headers | show |
| Series | Add audio driver base on rpmsg on i.MX platform | expand |
On Sun, Feb 07, 2021 at 06:23:51PM +0800, Shengjiu Wang wrote: > fsl_rpmsg cpu dai driver is driver for rpmsg audio, which is mainly used > for getting the user's configuration from device tree and configure the > clocks which is used by Cortex-M core. So in this document define the > needed property. > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > --- > .../devicetree/bindings/sound/fsl,rpmsg.yaml | 80 +++++++++++++++++++ > 1 file changed, 80 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml > > diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml > new file mode 100644 > index 000000000000..2d3ce10d42fc > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: NXP Audio RPMSG CPU DAI Controller > + > +maintainers: > + - Shengjiu Wang <shengjiu.wang@nxp.com> > + > +properties: > + compatible: > + enum: > + - fsl,imx7ulp-rpmsg > + - fsl,imx8mn-rpmsg > + - fsl,imx8mm-rpmsg > + - fsl,imx8mp-rpmsg rpmsg is a protocol. What's the h/w block? > + > + clocks: > + items: > + - description: Peripheral clock for register access > + - description: Master clock > + - description: DMA clock for DMA register access > + - description: Parent clock for multiple of 8kHz sample rates > + - description: Parent clock for multiple of 11kHz sample rates > + minItems: 5 > + > + clock-names: > + items: > + - const: ipg > + - const: mclk > + - const: dma > + - const: pll8k > + - const: pll11k > + minItems: 5 > + > + power-domains: > + maxItems: 1 > + > + fsl,audioindex: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: instance index for rpmsg image > + > + fsl,version: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: rpmsg image version index What are these 2 used for? > + > + fsl,buffer-size: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: pre allocate dma buffer size > + > + fsl,enable-lpa: > + $ref: /schemas/types.yaml#/definitions/flag > + description: enable low power audio path. > + > + fsl,codec-type: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Sometimes the codec is registered by > + driver not the device tree, this items > + can be used to distinguish codecs 0-2^32 are valid values? > + > +required: > + - compatible > + - fsl,audioindex > + - fsl,version > + - fsl,buffer-size > + > +additionalProperties: false > + > +examples: > + - | > + rpmsg_audio: rpmsg_audio { > + compatible = "fsl,imx8mn-rpmsg"; > + fsl,audioindex = <0> ; > + fsl,version = <2>; > + fsl,buffer-size = <0x6000000>; > + fsl,enable-lpa; > + status = "okay"; Don't show status in examples. > + }; > -- > 2.27.0 >
On Thu, Feb 11, 2021 at 6:13 AM Rob Herring <robh@kernel.org> wrote: > > On Sun, Feb 07, 2021 at 06:23:51PM +0800, Shengjiu Wang wrote: > > fsl_rpmsg cpu dai driver is driver for rpmsg audio, which is mainly used > > for getting the user's configuration from device tree and configure the > > clocks which is used by Cortex-M core. So in this document define the > > needed property. > > > > Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> > > --- > > .../devicetree/bindings/sound/fsl,rpmsg.yaml | 80 +++++++++++++++++++ > > 1 file changed, 80 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml > > new file mode 100644 > > index 000000000000..2d3ce10d42fc > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml > > @@ -0,0 +1,80 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: NXP Audio RPMSG CPU DAI Controller > > + > > +maintainers: > > + - Shengjiu Wang <shengjiu.wang@nxp.com> > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx7ulp-rpmsg > > + - fsl,imx8mn-rpmsg > > + - fsl,imx8mm-rpmsg > > + - fsl,imx8mp-rpmsg > > rpmsg is a protocol. What's the h/w block? On Linux side this driver is a virtual driver, it is running on Arm Cortex-A core. The h/w block is controlled by another core (cortex-M core). so this driver actually doesn't touch any hardware, it just does configuration for rpmsg channel. > > > + > > + clocks: > > + items: > > + - description: Peripheral clock for register access > > + - description: Master clock > > + - description: DMA clock for DMA register access > > + - description: Parent clock for multiple of 8kHz sample rates > > + - description: Parent clock for multiple of 11kHz sample rates > > + minItems: 5 > > + > > + clock-names: > > + items: > > + - const: ipg > > + - const: mclk > > + - const: dma > > + - const: pll8k > > + - const: pll11k > > + minItems: 5 > > + > > + power-domains: > > + maxItems: 1 > > + > > + fsl,audioindex: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: instance index for rpmsg image > > + > > + fsl,version: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: rpmsg image version index > > What are these 2 used for? fsl,audioindex: As we may support multiple instance, for example two sound card with one rpmsg channel, this is the instance index. fsl,version: There are maybe different image running on M core, this is the image version, different image has different function. > > > + > > + fsl,buffer-size: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: pre allocate dma buffer size > > + > > + fsl,enable-lpa: > > + $ref: /schemas/types.yaml#/definitions/flag > > + description: enable low power audio path. > > + > > + fsl,codec-type: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: Sometimes the codec is registered by > > + driver not the device tree, this items > > + can be used to distinguish codecs > > 0-2^32 are valid values? I should add range for it. > > > + > > +required: > > + - compatible > > + - fsl,audioindex > > + - fsl,version > > + - fsl,buffer-size > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + rpmsg_audio: rpmsg_audio { > > + compatible = "fsl,imx8mn-rpmsg"; > > + fsl,audioindex = <0> ; > > + fsl,version = <2>; > > + fsl,buffer-size = <0x6000000>; > > + fsl,enable-lpa; > > + status = "okay"; > > Don't show status in examples. ok, will remove it. > > > + }; > > -- > > 2.27.0 > >
On Thu, Feb 18, 2021 at 4:21 AM Shengjiu Wang <shengjiu.wang@gmail.com> wrote: > > rpmsg is a protocol. What's the h/w block? > > On Linux side this driver is a virtual driver, it is running > on Arm Cortex-A core. The h/w block is controlled by > another core (cortex-M core). so this driver actually > doesn't touch any hardware, it just does configuration > for rpmsg channel. > fsl,version: There are maybe different image running on M core, this > is the image version, different image has different function. To answer Rob's question: the hardware block that handles these messages is the Message Unit block.
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml new file mode 100644 index 000000000000..2d3ce10d42fc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Audio RPMSG CPU DAI Controller + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +properties: + compatible: + enum: + - fsl,imx7ulp-rpmsg + - fsl,imx8mn-rpmsg + - fsl,imx8mm-rpmsg + - fsl,imx8mp-rpmsg + + clocks: + items: + - description: Peripheral clock for register access + - description: Master clock + - description: DMA clock for DMA register access + - description: Parent clock for multiple of 8kHz sample rates + - description: Parent clock for multiple of 11kHz sample rates + minItems: 5 + + clock-names: + items: + - const: ipg + - const: mclk + - const: dma + - const: pll8k + - const: pll11k + minItems: 5 + + power-domains: + maxItems: 1 + + fsl,audioindex: + $ref: /schemas/types.yaml#/definitions/uint32 + description: instance index for rpmsg image + + fsl,version: + $ref: /schemas/types.yaml#/definitions/uint32 + description: rpmsg image version index + + fsl,buffer-size: + $ref: /schemas/types.yaml#/definitions/uint32 + description: pre allocate dma buffer size + + fsl,enable-lpa: + $ref: /schemas/types.yaml#/definitions/flag + description: enable low power audio path. + + fsl,codec-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Sometimes the codec is registered by + driver not the device tree, this items + can be used to distinguish codecs + +required: + - compatible + - fsl,audioindex + - fsl,version + - fsl,buffer-size + +additionalProperties: false + +examples: + - | + rpmsg_audio: rpmsg_audio { + compatible = "fsl,imx8mn-rpmsg"; + fsl,audioindex = <0> ; + fsl,version = <2>; + fsl,buffer-size = <0x6000000>; + fsl,enable-lpa; + status = "okay"; + };
fsl_rpmsg cpu dai driver is driver for rpmsg audio, which is mainly used for getting the user's configuration from device tree and configure the clocks which is used by Cortex-M core. So in this document define the needed property. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- .../devicetree/bindings/sound/fsl,rpmsg.yaml | 80 +++++++++++++++++++ 1 file changed, 80 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml -- 2.27.0