diff mbox series

[git:media_tree/master] media: rc: fix timeout handling after switch to microsecond durations

Message ID E1l6V8C-005hj8-DZ@www.linuxtv.org
State New
Headers show
Series [git:media_tree/master] media: rc: fix timeout handling after switch to microsecond durations | expand

Commit Message

Mauro Carvalho Chehab Jan. 11, 2021, 11:58 a.m. UTC 
This is an automatic generated email to let you know that the following patch were queued:

Subject: media: rc: fix timeout handling after switch to microsecond durations
Author:  Matthias Reichl <hias@horus.com>
Date:    Tue Jan 5 10:30:23 2021 +0100

Commit 528222d853f92 ("media: rc: harmonize infrared durations to
microseconds") missed to switch some timeout calculations from
nanoseconds to microseconds. This resulted in spurious key_up+key_down
events at the last scancode if the rc device uses a long timeout
(eg 100ms on nuvoton-cir) as the device timeout wasn't properly
accounted for in the keyup timeout calculation.

Fix this by applying the proper conversion functions.

Cc: stable@vger.kernel.org
Fixes: 528222d853f92 ("media: rc: harmonize infrared durations to microseconds")
Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

 drivers/media/rc/ir-mce_kbd-decoder.c | 2 +-
 drivers/media/rc/rc-main.c            | 4 ++--
 drivers/media/rc/serial_ir.c          | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

---
diff mbox series

Patch

diff --git a/drivers/media/rc/ir-mce_kbd-decoder.c b/drivers/media/rc/ir-mce_kbd-decoder.c
index be8f2756a444..1524dc0fc566 100644
--- a/drivers/media/rc/ir-mce_kbd-decoder.c
+++ b/drivers/media/rc/ir-mce_kbd-decoder.c
@@ -320,7 +320,7 @@  again:
 				data->body);
 			spin_lock(&data->keylock);
 			if (scancode) {
-				delay = nsecs_to_jiffies(dev->timeout) +
+				delay = usecs_to_jiffies(dev->timeout) +
 					msecs_to_jiffies(100);
 				mod_timer(&data->rx_timeout, jiffies + delay);
 			} else {
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 29d4d01896ff..1fd62c1dac76 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -737,7 +737,7 @@  static unsigned int repeat_period(int protocol)
 void rc_repeat(struct rc_dev *dev)
 {
 	unsigned long flags;
-	unsigned int timeout = nsecs_to_jiffies(dev->timeout) +
+	unsigned int timeout = usecs_to_jiffies(dev->timeout) +
 		msecs_to_jiffies(repeat_period(dev->last_protocol));
 	struct lirc_scancode sc = {
 		.scancode = dev->last_scancode, .rc_proto = dev->last_protocol,
@@ -855,7 +855,7 @@  void rc_keydown(struct rc_dev *dev, enum rc_proto protocol, u64 scancode,
 	ir_do_keydown(dev, protocol, scancode, keycode, toggle);
 
 	if (dev->keypressed) {
-		dev->keyup_jiffies = jiffies + nsecs_to_jiffies(dev->timeout) +
+		dev->keyup_jiffies = jiffies + usecs_to_jiffies(dev->timeout) +
 			msecs_to_jiffies(repeat_period(protocol));
 		mod_timer(&dev->timer_keyup, dev->keyup_jiffies);
 	}
diff --git a/drivers/media/rc/serial_ir.c b/drivers/media/rc/serial_ir.c
index 8cc28c92d05d..96ae0294ac10 100644
--- a/drivers/media/rc/serial_ir.c
+++ b/drivers/media/rc/serial_ir.c
@@ -385,7 +385,7 @@  static irqreturn_t serial_ir_irq_handler(int i, void *blah)
 	} while (!(sinp(UART_IIR) & UART_IIR_NO_INT)); /* still pending ? */
 
 	mod_timer(&serial_ir.timeout_timer,
-		  jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
+		  jiffies + usecs_to_jiffies(serial_ir.rcdev->timeout));
 
 	ir_raw_event_handle(serial_ir.rcdev);