@@ -283,7 +283,7 @@ pmi8994_regulators: pmi8994-regulators {
};
};
-&sdhc_1 {
+&sdhc1 {
status = "okay";
mmc-hs400-1_8v;
@@ -70,21 +70,6 @@ ramoops@dfc00000 {
pmsg-size = <0x20000>;
};
- continuous_splash: framebuffer@3401000{
- reg = <0x0 0x3401000 0x0 0x2200000>;
- no-map;
- };
-
- dfps_data_mem: dfps_data_mem@3400000 {
- reg = <0x0 0x3400000 0x0 0x1000>;
- no-map;
- };
-
- peripheral_region: peripheral_region@7400000 {
- reg = <0x0 0x7400000 0x0 0x1c00000>;
- no-map;
- };
-
modem_region: modem_region@9000000 {
reg = <0x0 0x9000000 0x0 0x5a00000>;
no-map;
@@ -97,43 +82,49 @@ tzapp: modem_region@ea00000 {
};
};
-&blsp_i2c2 {
+&blsp1_i2c2 {
status = "okay";
/* Atmel or Synaptics touchscreen */
};
-&blsp_i2c5 {
+&blsp1_i2c5 {
status = "okay";
- /* Silabs si4705 FM transmitter */
+ /* ST lsm6db0 gyro/accelerometer */
};
-&blsp_i2c6 {
+&blsp1_i2c6 {
status = "okay";
- /* NCI NFC,
+ /*
+ * NXP NCI NFC,
* TI USB320 Type-C controller,
* Pericom 30216a USB (de)mux switch
*/
};
-&blsp_i2c7 {
+&blsp2_i2c1 {
status = "okay";
/* cm36686 proximity and ambient light sensor */
};
-&blsp_i2c13 {
+&blsp2_i2c5 {
status = "okay";
- /* ST lsm6db0 gyro/accelerometer */
+ /* Silabs si4705 FM transmitter */
};
&blsp2_uart2 {
status = "okay";
};
+&peripheral_region {
+ reg = <0x0 0x7400000 0x0 0x1c00000>;
+ no-map;
+};
+
&rpm_requests {
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
@@ -364,7 +355,7 @@ pmi8994_bby: boost-bypass {
};
};
-&sdhc_1 {
+&sdhc1 {
status = "okay";
mmc-hs400-1_8v;
@@ -2,767 +2,29 @@
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/qcom,gcc-msm8994.h>
-#include <dt-bindings/power/qcom-rpmpd.h>
+#include "msm8994.dtsi"
-/ {
- interrupt-parent = <&intc>;
+/* 8992 only features 2 A57 cores. */
+/delete-node/ &CPU6;
+/delete-node/ &CPU7;
+/delete-node/ &cpu6_map;
+/delete-node/ &cpu7_map;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CPU4: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x100>;
- next-level-cache = <&L2_1>;
- enable-method = "psci";
- L2_1: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- CPU5: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a57";
- reg = <0x0 0x101>;
- next-level-cache = <&L2_1>;
- enable-method = "psci";
- };
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
-
- core1 {
- cpu = <&CPU1>;
- };
-
- core2 {
- cpu = <&CPU2>;
- };
-
- core3 {
- cpu = <&CPU3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&CPU4>;
- };
-
- core1 {
- cpu = <&CPU5>;
- };
- };
- };
- };
-
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- };
-
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-msm8994", "qcom,scm";
- };
- };
-
- memory {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
- };
-
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "hvc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- smem_region: smem@6a00000 {
- reg = <0x0 0x6a00000 0x0 0x200000>;
- no-map;
- };
- };
-
- sfpb_mutex: hwmutex {
- compatible = "qcom,sfpb-mutex";
- syscon = <&sfpb_mutex_regs 0x0 0x100>;
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_region>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- hwlocks = <&sfpb_mutex 3>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
-
- intc: interrupt-controller@f9000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0xf9000000 0x1000>,
- <0xf9002000 0x1000>;
- };
-
- apcs: mailbox@f900d000 {
- compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
- reg = <0xf900d000 0x2000>;
- #mbox-cells = <1>;
- };
-
- timer@f9020000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0xf9020000 0x1000>;
-
- frame@f9021000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9021000 0x1000>,
- <0xf9022000 0x1000>;
- };
-
- frame@f9023000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9023000 0x1000>;
- status = "disabled";
- };
-
- frame@f9024000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9024000 0x1000>;
- status = "disabled";
- };
-
- frame@f9025000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9025000 0x1000>;
- status = "disabled";
- };
-
- frame@f9026000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9026000 0x1000>;
- status = "disabled";
- };
-
- frame@f9027000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9027000 0x1000>;
- status = "disabled";
- };
-
- frame@f9028000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0xf9028000 0x1000>;
- status = "disabled";
- };
- };
-
- usb3: usb@f92f8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0xf92f8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>;
- clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo";
-
- assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <120000000>;
-
- power-domains = <&gcc USB30_GDSC>;
- qcom,select-utmi-as-pipe-clk;
-
- dwc3@f9200000 {
- compatible = "snps,dwc3";
- reg = <0xf9200000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
- maximum-speed = "high-speed";
- dr_mode = "peripheral";
- };
- };
-
- sdhc_1: sdhci@f9824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC1_APPS_CLK>,
- <&gcc GCC_SDCC1_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
- &sdc1_rclk_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
- &sdc1_rclk_off>;
-
- regulator-always-on;
- bus-width = <8>;
- non-removable;
-
- status = "disabled";
- };
-
- sdhc_2: sdhci@f98a4900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
-
- interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
-
- clocks = <&gcc GCC_SDCC2_APPS_CLK>,
- <&gcc GCC_SDCC2_AHB_CLK>,
- <&xo_board>;
- clock-names = "core", "iface", "xo";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
- cd-gpios = <&tlmm 100 0>;
- bus-width = <4>;
- status = "disabled";
- };
-
- blsp1_uart2: serial@f991e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf991e000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
- clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
- status = "disabled";
- };
-
- blsp_i2c1: i2c@f9923000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9923000 0x500>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_default>;
- pinctrl-1 = <&i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c2: i2c@f9924000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9924000 0x500>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c2_default>;
- pinctrl-1 = <&i2c2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- /* Somebody was very creative with their numbering scheme downstream... */
-
- blsp_i2c13: i2c@f9927000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9927000 0x500>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c13_default>;
- pinctrl-1 = <&i2c13_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c6: i2c@f9928000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9928000 0x500>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c6_default>;
- pinctrl-1 = <&i2c6_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_uart2: serial@f995e000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0xf995e000 0x1000>;
- interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
- clock-names = "core", "iface";
- clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_default>;
- pinctrl-1 = <&blsp2_uart2_sleep>;
- status = "disabled";
- };
-
- blsp_i2c7: i2c@f9963000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9963000 0x500>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <400000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c7_default>;
- pinctrl-1 = <&i2c7_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp_i2c5: i2c@f9967000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0xf9967000 0x500>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- clock-frequency = <100000>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c5_default>;
- pinctrl-1 = <&i2c5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- gcc: clock-controller@fc400000 {
- compatible = "qcom,gcc-msm8994";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0xfc400000 0x2000>;
- };
-
- rpm_msg_ram: memory@fc428000 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0xfc428000 0x4000>;
- };
-
- restart@fc4ab000 {
- compatible = "qcom,pshold";
- reg = <0xfc4ab000 0x4>;
- };
-
- spmi_bus: spmi@fc4c0000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0xfc4cf000 0x1000>,
- <0xfc4cb000 0x1000>,
- <0xfc4ca000 0x1000>;
- reg-names = "core", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- sfpb_mutex_regs: syscon@fd484000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "syscon";
- reg = <0xfd484000 0x400>;
- };
-
- tlmm: pinctrl@fd510000 {
- compatible = "qcom,msm8994-pinctrl";
- reg = <0xfd510000 0x4000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- gpio-ranges = <&tlmm 0 0 146>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
-
- blsp1_uart2_default: blsp1-uart2-default {
- function = "blsp_uart2";
- pins = "gpio4", "gpio5";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp1_uart2_sleep: blsp1-uart2-sleep {
- function = "gpio";
- pins = "gpio4", "gpio5";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- blsp2_uart2_default: blsp2-uart2-default {
- function = "blsp_uart8";
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- drive-strength = <16>;
- bias-disable;
- };
-
- blsp2_uart2_sleep: blsp2-uart2-sleep {
- function = "gpio";
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- sdc1_clk_on: clk-on {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <6>;
- };
-
- sdc1_clk_off: clk-off {
- pins = "sdc1_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- sdc1_cmd_on: cmd-on {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <6>;
- };
-
- sdc1_cmd_off: cmd-off {
- pins = "sdc1_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc1_data_on: data-on {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <6>;
- };
-
- sdc1_data_off: data-off {
- pins = "sdc1_data";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc1_rclk_on: rclk-on {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
-
- sdc1_rclk_off: rclk-off {
- pins = "sdc1_rclk";
- bias-pull-down;
- };
-
- i2c1_default: i2c1-default {
- function = "blsp_i2c1";
- pins = "gpio2", "gpio3";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c1_sleep: i2c1-sleep {
- function = "gpio";
- pins = "gpio2", "gpio3";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c2_default: i2c2-default {
- function = "blsp_i2c2";
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c2_sleep: i2c2-sleep {
- function = "gpio";
- pins = "gpio6", "gpio7";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c5_default: i2c5-default {
- /* Don't be fooled! Nobody knows the reason why though... */
- function = "blsp_i2c11";
- pins = "gpio83", "gpio84";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c5_sleep: i2c5-sleep {
- function = "gpio";
- pins = "gpio83", "gpio84";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c6_default: i2c6-default {
- function = "blsp_i2c6";
- pins = "gpio28", "gpio27";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c6_sleep: i2c6-sleep {
- function = "gpio";
- pins = "gpio28", "gpio27";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c7_default: i2c7-default {
- function = "blsp_i2c7";
- pins = "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c7_sleep: i2c7-sleep {
- function = "gpio";
- pins = "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c13_default: i2c13-default {
- /* Not a typo either. */
- function = "blsp_i2c5";
- pins = "gpio23", "gpio24";
- drive-strength = <2>;
- bias-disable;
- };
-
- i2c13_sleep: i2c13-sleep {
- function = "gpio";
- pins = "gpio23", "gpio24";
- drive-strength = <2>;
- bias-disable;
- };
-
- sdc2_clk_on: sdc2-clk-on {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <16>;
- };
-
- sdc2_clk_off: sdc2-clk-off {
- pins = "sdc2_clk";
- bias-disable;
- drive-strength = <2>;
- };
-
- sdc2_cmd_on: sdc2-cmd-on {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sdc2_cmd_off: sdc2-cmd-off {
- pins = "sdc2_cmd";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- sdc2_data_on: sdc2-data-on {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <10>;
- };
-
- sdc2_data_off: sdc2-data-off {
- pins = "sdc2_data";
- bias-pull-up;
- drive-strength = <2>;
- };
- };
- };
-
- smd_rpm: smd {
- compatible = "qcom,smd";
- rpm {
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 8 0>;
- qcom,smd-edge = <15>;
- qcom,local-pid = <0>;
- qcom,remote-pid = <6>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8994";
- qcom,smd-channels = "rpm_requests";
-
- rpmcc: rpmcc {
- compatible = "qcom,rpmcc-msm8992";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,msm8994-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
+&rpmcc {
+ compatible = "qcom,rpmcc-msm8992";
+};
- rpmpd_opp_ret: opp1 {
- opp-level = <1>;
- };
- rpmpd_opp_svs_krait: opp2 {
- opp-level = <2>;
- };
- rpmpd_opp_svs_soc: opp3 {
- opp-level = <3>;
- };
- rpmpd_opp_nom: opp4 {
- opp-level = <4>;
- };
- rpmpd_opp_turbo: opp5 {
- opp-level = <5>;
- };
- rpmpd_opp_super_turbo: opp6 {
- opp-level = <6>;
- };
- };
- };
- };
- };
- };
+&tcsr_mutex {
+ compatible = "qcom,sfpb-mutex";
+};
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+&timer {
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- vph_pwr: vph-pwr-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vph_pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
};
+&tlmm {
+ compatible = "qcom,msm8992-pinctrl";
+};
@@ -132,11 +132,11 @@ core1 {
cpu = <&CPU5>;
};
- core2 {
+ cpu6_map: core2 {
cpu = <&CPU6>;
};
- core3 {
+ cpu7_map: core3 {
cpu = <&CPU7>;
};
};
@@ -1009,7 +1009,7 @@ sdc2_data_off: sdc2-data-off {
};
};
- timer {
+ timer: timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 0xff08>,
<GIC_PPI 3 0xff08>,
This saves a good thousand lines of code, perhaps even more in the long run. Co-authored-by: Gustave Monce <gustave.monce@outlook.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> --- .../dts/qcom/msm8992-bullhead-rev-101.dts | 2 +- .../boot/dts/qcom/msm8992-xiaomi-libra.dts | 39 +- arch/arm64/boot/dts/qcom/msm8992.dtsi | 772 +----------------- arch/arm64/boot/dts/qcom/msm8994.dtsi | 6 +- 4 files changed, 36 insertions(+), 783 deletions(-)