| Message ID | 20210128232729.16064-6-sakari.ailus@linux.intel.com |
|---|---|
| State | New |
| Headers | show |
| Series | [v9,1/7] ACPI: scan: Obtain device's desired enumeration power state | expand |
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> On 1/29/21 7:27 AM, Sakari Ailus wrote: > From: Rajmohan Mani <rajmohan.mani@intel.com> > > Tell ACPI device PM code that the driver supports the device being powered > off when the driver's probe function is entered. > > Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> > Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> > --- > drivers/media/i2c/imx319.c | 72 +++++++++++++++++++++++--------------- > 1 file changed, 44 insertions(+), 28 deletions(-) > > diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c > index 8473c0bbb35d6..e0b22e9318fed 100644 > --- a/drivers/media/i2c/imx319.c > +++ b/drivers/media/i2c/imx319.c > @@ -140,6 +140,8 @@ struct imx319 { > > /* Streaming on/off */ > bool streaming; > + /* True if the device has been identified */ > + bool identified; > }; > > static const struct imx319_reg imx319_global_regs[] = { > @@ -2084,6 +2086,31 @@ imx319_set_pad_format(struct v4l2_subdev *sd, > return 0; > } > > +/* Verify chip ID */ > +static int imx319_identify_module(struct imx319 *imx319) > +{ > + struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd); > + int ret; > + u32 val; > + > + if (imx319->identified) > + return 0; > + > + ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val); > + if (ret) > + return ret; > + > + if (val != IMX319_CHIP_ID) { > + dev_err(&client->dev, "chip id mismatch: %x!=%x", > + IMX319_CHIP_ID, val); > + return -EIO; > + } > + > + imx319->identified = true; > + > + return 0; > +} > + > /* Start streaming */ > static int imx319_start_streaming(struct imx319 *imx319) > { > @@ -2091,6 +2118,10 @@ static int imx319_start_streaming(struct imx319 *imx319) > const struct imx319_reg_list *reg_list; > int ret; > > + ret = imx319_identify_module(imx319); > + if (ret) > + return ret; > + > /* Global Setting */ > reg_list = &imx319_global_setting; > ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs); > @@ -2208,26 +2239,6 @@ static int __maybe_unused imx319_resume(struct device *dev) > return ret; > } > > -/* Verify chip ID */ > -static int imx319_identify_module(struct imx319 *imx319) > -{ > - struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd); > - int ret; > - u32 val; > - > - ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val); > - if (ret) > - return ret; > - > - if (val != IMX319_CHIP_ID) { > - dev_err(&client->dev, "chip id mismatch: %x!=%x", > - IMX319_CHIP_ID, val); > - return -EIO; > - } > - > - return 0; > -} > - > static const struct v4l2_subdev_core_ops imx319_subdev_core_ops = { > .subscribe_event = v4l2_ctrl_subdev_subscribe_event, > .unsubscribe_event = v4l2_event_subdev_unsubscribe, > @@ -2422,6 +2433,7 @@ static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev) > static int imx319_probe(struct i2c_client *client) > { > struct imx319 *imx319; > + bool low_power; > int ret; > u32 i; > > @@ -2434,11 +2446,14 @@ static int imx319_probe(struct i2c_client *client) > /* Initialize subdev */ > v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops); > > - /* Check module identity */ > - ret = imx319_identify_module(imx319); > - if (ret) { > - dev_err(&client->dev, "failed to find sensor: %d", ret); > - goto error_probe; > + low_power = acpi_dev_state_low_power(&client->dev); > + if (!low_power) { > + /* Check module identity */ > + ret = imx319_identify_module(imx319); > + if (ret) { > + dev_err(&client->dev, "failed to find sensor: %d", ret); > + goto error_probe; > + } > } > > imx319->hwcfg = imx319_get_hwcfg(&client->dev); > @@ -2491,10 +2506,10 @@ static int imx319_probe(struct i2c_client *client) > goto error_media_entity; > > /* > - * Device is already turned on by i2c-core with ACPI domain PM. > - * Enable runtime PM and turn off the device. > + * Don't set the device's state to active if it's in a low power state. > */ > - pm_runtime_set_active(&client->dev); > + if (!low_power) > + pm_runtime_set_active(&client->dev); > pm_runtime_enable(&client->dev); > pm_runtime_idle(&client->dev); > > @@ -2547,6 +2562,7 @@ static struct i2c_driver imx319_i2c_driver = { > }, > .probe_new = imx319_probe, > .remove = imx319_remove, > + .flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE, > }; > module_i2c_driver(imx319_i2c_driver); > >
diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c index 8473c0bbb35d6..e0b22e9318fed 100644 --- a/drivers/media/i2c/imx319.c +++ b/drivers/media/i2c/imx319.c @@ -140,6 +140,8 @@ struct imx319 { /* Streaming on/off */ bool streaming; + /* True if the device has been identified */ + bool identified; }; static const struct imx319_reg imx319_global_regs[] = { @@ -2084,6 +2086,31 @@ imx319_set_pad_format(struct v4l2_subdev *sd, return 0; } +/* Verify chip ID */ +static int imx319_identify_module(struct imx319 *imx319) +{ + struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd); + int ret; + u32 val; + + if (imx319->identified) + return 0; + + ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val); + if (ret) + return ret; + + if (val != IMX319_CHIP_ID) { + dev_err(&client->dev, "chip id mismatch: %x!=%x", + IMX319_CHIP_ID, val); + return -EIO; + } + + imx319->identified = true; + + return 0; +} + /* Start streaming */ static int imx319_start_streaming(struct imx319 *imx319) { @@ -2091,6 +2118,10 @@ static int imx319_start_streaming(struct imx319 *imx319) const struct imx319_reg_list *reg_list; int ret; + ret = imx319_identify_module(imx319); + if (ret) + return ret; + /* Global Setting */ reg_list = &imx319_global_setting; ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs); @@ -2208,26 +2239,6 @@ static int __maybe_unused imx319_resume(struct device *dev) return ret; } -/* Verify chip ID */ -static int imx319_identify_module(struct imx319 *imx319) -{ - struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd); - int ret; - u32 val; - - ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val); - if (ret) - return ret; - - if (val != IMX319_CHIP_ID) { - dev_err(&client->dev, "chip id mismatch: %x!=%x", - IMX319_CHIP_ID, val); - return -EIO; - } - - return 0; -} - static const struct v4l2_subdev_core_ops imx319_subdev_core_ops = { .subscribe_event = v4l2_ctrl_subdev_subscribe_event, .unsubscribe_event = v4l2_event_subdev_unsubscribe, @@ -2422,6 +2433,7 @@ static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev) static int imx319_probe(struct i2c_client *client) { struct imx319 *imx319; + bool low_power; int ret; u32 i; @@ -2434,11 +2446,14 @@ static int imx319_probe(struct i2c_client *client) /* Initialize subdev */ v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops); - /* Check module identity */ - ret = imx319_identify_module(imx319); - if (ret) { - dev_err(&client->dev, "failed to find sensor: %d", ret); - goto error_probe; + low_power = acpi_dev_state_low_power(&client->dev); + if (!low_power) { + /* Check module identity */ + ret = imx319_identify_module(imx319); + if (ret) { + dev_err(&client->dev, "failed to find sensor: %d", ret); + goto error_probe; + } } imx319->hwcfg = imx319_get_hwcfg(&client->dev); @@ -2491,10 +2506,10 @@ static int imx319_probe(struct i2c_client *client) goto error_media_entity; /* - * Device is already turned on by i2c-core with ACPI domain PM. - * Enable runtime PM and turn off the device. + * Don't set the device's state to active if it's in a low power state. */ - pm_runtime_set_active(&client->dev); + if (!low_power) + pm_runtime_set_active(&client->dev); pm_runtime_enable(&client->dev); pm_runtime_idle(&client->dev); @@ -2547,6 +2562,7 @@ static struct i2c_driver imx319_i2c_driver = { }, .probe_new = imx319_probe, .remove = imx319_remove, + .flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE, }; module_i2c_driver(imx319_i2c_driver);