diff mbox series

[09/10] arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin

Message ID 20210125184736.1226435-9-l.stach@pengutronix.de
State Accepted
Commit b53e7e0c65bfb68aee4fba83eb3b6ec74f0869ae
Headers show
Series [01/10] ARM: dts: imx6: rdu2: enable WDOG1 | expand

Commit Message

Lucas Stach Jan. 25, 2021, 6:47 p.m. UTC 
The ALERT signaling happens on the falling edge of the signal, as rising
edge doesn't really have any notion, as it may happen much later (due to
shared IRQ line) or too early if the chip resolves the fault itself. So
only trigger the IRQ on the edge we are actually interested in.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index edbde9ed4caf..4dc8383478ee 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -304,7 +304,7 @@ 
 		reg = <0x32>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <17 IRQ_TYPE_EDGE_BOTH>,
-		             <18 IRQ_TYPE_EDGE_BOTH>;
+		             <18 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-names = "a_det", "alert";
 	};