Message ID | b8dcd61fdd8674b79d81c94b424fce79b86d8979.1611621365.git.gurus@codeaurora.org |
---|---|
State | Accepted |
Commit | dd6f5afb1c2db352f8dd2d181597b3835f132657 |
Headers | show |
Series | [RESEND,v6,1/3] bindings: pm8941-misc: Convert bindings to YAML | expand |
On 21. 1. 26. 오전 9:38, Guru Das Srinagesh wrote: > Convert bindings from txt to YAML. > > Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > .../bindings/extcon/qcom,pm8941-misc.txt | 41 --------------- > .../bindings/extcon/qcom,pm8941-misc.yaml | 59 ++++++++++++++++++++++ > 2 files changed, 59 insertions(+), 41 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt > create mode 100644 Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml > > diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt > deleted file mode 100644 > index 35383adb..0000000 > --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt > +++ /dev/null > @@ -1,41 +0,0 @@ > -Qualcomm's PM8941 USB ID Extcon device > - > -Some Qualcomm PMICs have a "misc" module that can be used to detect when > -the USB ID pin has been pulled low or high. > - > -PROPERTIES > - > -- compatible: > - Usage: required > - Value type: <string> > - Definition: Should contain "qcom,pm8941-misc"; > - > -- reg: > - Usage: required > - Value type: <u32> > - Definition: Should contain the offset to the misc address space > - > -- interrupts: > - Usage: required > - Value type: <prop-encoded-array> > - Definition: Should contain the usb id interrupt > - > -- interrupt-names: > - Usage: required > - Value type: <stringlist> > - Definition: Should contain the string "usb_id" for the usb id interrupt > - > -Example: > - > - pmic { > - usb_id: misc@900 { > - compatible = "qcom,pm8941-misc"; > - reg = <0x900>; > - interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; > - interrupt-names = "usb_id"; > - }; > - } > - > - usb-controller { > - extcon = <&usb_id>; > - }; > diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml > new file mode 100644 > index 0000000..e8eea83 > --- /dev/null > +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device > + > +maintainers: > + - Guru Das Srinagesh <gurus@codeaurora.org> > + > +description: | > + Some Qualcomm PMICs have a "misc" module that can be used to detect when > + the USB ID pin has been pulled low or high. > + > +properties: > + compatible: > + items: > + - const: qcom,pm8941-misc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + interrupt-names: > + items: > + - const: usb_id > + > +required: > + - compatible > + - reg > + - interrupts > + - interrupt-names > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + pmic { > + #address-cells = <1>; > + #size-cells = <0>; > + interrupt-controller; > + #interrupt-cells = <4>; > + > + usb_id: misc@900 { > + compatible = "qcom,pm8941-misc"; > + reg = <0x900>; > + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; > + interrupt-names = "usb_id"; > + }; > + }; > + > + usb-controller { > + extcon = <&usb_id>; > + }; > Applied it. Thanks, Chanwoo Choi
diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt deleted file mode 100644 index 35383adb..0000000 --- a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt +++ /dev/null @@ -1,41 +0,0 @@ -Qualcomm's PM8941 USB ID Extcon device - -Some Qualcomm PMICs have a "misc" module that can be used to detect when -the USB ID pin has been pulled low or high. - -PROPERTIES - -- compatible: - Usage: required - Value type: <string> - Definition: Should contain "qcom,pm8941-misc"; - -- reg: - Usage: required - Value type: <u32> - Definition: Should contain the offset to the misc address space - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Should contain the usb id interrupt - -- interrupt-names: - Usage: required - Value type: <stringlist> - Definition: Should contain the string "usb_id" for the usb id interrupt - -Example: - - pmic { - usb_id: misc@900 { - compatible = "qcom,pm8941-misc"; - reg = <0x900>; - interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; - interrupt-names = "usb_id"; - }; - } - - usb-controller { - extcon = <&usb_id>; - }; diff --git a/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml new file mode 100644 index 0000000..e8eea83 --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device + +maintainers: + - Guru Das Srinagesh <gurus@codeaurora.org> + +description: | + Some Qualcomm PMICs have a "misc" module that can be used to detect when + the USB ID pin has been pulled low or high. + +properties: + compatible: + items: + - const: qcom,pm8941-misc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: usb_id + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + pmic { + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + + usb_id: misc@900 { + compatible = "qcom,pm8941-misc"; + reg = <0x900>; + interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_id"; + }; + }; + + usb-controller { + extcon = <&usb_id>; + };