diff mbox

[6/6] ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable

Message ID 20140908184727.GA2103@kahuna
State Accepted
Commit 66b0436977e2c62388d48836ff784f1fedb49c4f
Headers show

Commit Message

Nishanth Menon Sept. 8, 2014, 6:47 p.m. UTC 
On 09:03-20140822, Nishanth Menon wrote:
>  	status = "okay";
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&uart1_pins>;
> +	interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH
> +			       &dra7_pmx_core 0x3e0>;
^^
Thanks to Lee Jones pointing this out to me in a different context[1]
I made the wrong usage. Fixing the syntax to stay in sync with
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

[1] http://marc.info/?l=linux-omap&m=140930980325273&w=2

-----8<----
From c3c284ebd2b8d5535abf297ef7537b2caa7fe67b Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Fri, 6 Jun 2014 20:53:22 -0500
Subject: [PATCH V2 6/6] ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable

Mark rxd as wakeupcapable for 115200n8 no hardware-flow control
configuration. If h/w flow control is being used, then rts/cts
appropriately should be used.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 arch/arm/boot/dts/dra7-evm.dts |    2 ++
 1 file changed, 2 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 50f8022..08434c7 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -303,6 +303,8 @@ 
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
+	interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
 };
 
 &uart2 {