@@ -58,11 +58,13 @@ Optional properties:-
phy-names: name of the Generic Keystine SerDes phy for PCI
- If boot loader already does PCI link establishment, then phys and
phy-names shouldn't be present.
+ ti,pcie-port: PCI port number. This is used to configure the PCI port
+ number. For example K2E SoC supports 2 PCI ports and PCI bindings
+ for the second port adds ti,pcie-port = <1> to identify second port
+ and driver uses this to configure the PCI mode register for second
+ port. If not present, port number 0 is assumed.
Designware DT Properties not applicable for Keystone PCI
1. pcie_bus clock-names not used. Instead, a phandle to phys is used.
-Note for PCI driver usage
-=========================
-Driver requires pci=pcie_bus_perf in the bootargs for proper functioning.
@@ -252,8 +252,8 @@ static int keystone_pcie_fault(unsigned long addr, unsigned int fsr,
static void __init ks_pcie_host_init(struct pcie_port *pp)
{
- u32 vendor_device_id, val;
struct keystone_pcie *ks_pcie = to_keystone_pcie(pp);
+ u32 val;
ks_pcie_establish_link(ks_pcie);
ks_dw_pcie_setup_rc_app_regs(ks_pcie);
@@ -262,8 +262,7 @@ static void __init ks_pcie_host_init(struct pcie_port *pp)
pp->dbi_base + PCI_IO_BASE);
/* update the Vendor ID */
- vendor_device_id = readl(ks_pcie->va_reg_pciid);
- writew((vendor_device_id >> 16), pp->dbi_base + PCI_DEVICE_ID);
+ writew(ks_pcie->device_id, pp->dbi_base + PCI_DEVICE_ID);
/* update the DEV_STAT_CTRL to publish right mrrs */
val = readl(pp->dbi_base + PCIE_CAP_BASE + PCI_EXP_DEVCTL);
@@ -344,12 +343,13 @@ static int __exit ks_pcie_remove(struct platform_device *pdev)
static int __init ks_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
struct keystone_pcie *ks_pcie;
+ int ret = 0, port_id = 0;
struct pcie_port *pp;
struct resource *res;
void __iomem *reg_p;
struct phy *phy;
- int ret = 0;
u32 val;
ks_pcie = devm_kzalloc(&pdev->dev, sizeof(*ks_pcie),
@@ -360,17 +360,24 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
}
pp = &ks_pcie->pp;
+ /* read the PCI port id */
+ of_property_read_u32(np, "ti,pcie-port", &port_id);
+
/* index 2 is the devcfg register for RC mode settings */
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
reg_p = devm_ioremap_resource(dev, res);
if (IS_ERR(reg_p))
return PTR_ERR(reg_p);
+
/* enable RC mode in devcfg */
val = readl(reg_p);
- val &= ~PCIE_MODE_MASK;
- val |= PCIE_RC_MODE;
+ port_id <<= 1;
+ val &= ~(PCIE_MODE_MASK << port_id);
+ val |= (PCIE_RC_MODE << port_id);
writel(val, reg_p);
+ devm_iounmap(dev, reg_p);
+ devm_release_mem_region(dev, res->start, resource_size(res));
/* initialize SerDes Phy if present */
phy = devm_phy_get(dev, "pcie-phy");
@@ -385,7 +392,9 @@ static int __init ks_pcie_probe(struct platform_device *pdev)
reg_p = devm_ioremap_resource(dev, res);
if (IS_ERR(reg_p))
return PTR_ERR(reg_p);
- ks_pcie->va_reg_pciid = reg_p;
+ ks_pcie->device_id = readl(reg_p) >> 16;
+ devm_iounmap(dev, reg_p);
+ devm_release_mem_region(dev, res->start, resource_size(res));
pp->dev = dev;
platform_set_drvdata(pdev, ks_pcie);
@@ -19,8 +19,8 @@
struct keystone_pcie {
struct clk *clk;
struct pcie_port pp;
- void __iomem *va_reg_pciid;
-
+ /* PCI Device ID */
+ u32 device_id;
int num_legacy_host_irqs;
int legacy_host_irqs[MAX_LEGACY_HOST_IRQS];
struct device_node *legacy_intc_np;
K2E SoC has two PCI ports. The SATA controller is connected to second PCI port (port 1). This patch enhances the driver to support multiple ports. Update the DT Documentation for the new attribute, ti,pcie-port and remove the note for bootargs as this is no longer needed. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> CC: Rob Herring <robh+dt@kernel.org> CC: Pawel Moll <pawel.moll@arm.com> CC: Mark Rutland <mark.rutland@arm.com> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Kumar Gala <galak@codeaurora.org> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Santosh Shilimkar <santosh.shilimkar@ti.com> --- .../devicetree/bindings/pci/pci-keystone.txt | 8 ++++--- drivers/pci/host/pci-keystone.c | 23 ++++++++++++++------ drivers/pci/host/pci-keystone.h | 4 ++-- 3 files changed, 23 insertions(+), 12 deletions(-)