diff mbox series

[v2,16/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding

Message ID 20210120134357.1522254-16-robert.foss@linaro.org
State New
Headers show
Series [v2,01/22] media: camss: Fix vfe_isr_comp_done() documentation | expand

Commit Message

Robert Foss Jan. 20, 2021, 1:43 p.m. UTC
Signed-off-by: Robert Foss <robert.foss@linaro.org>

---

Changes since v1:
 - Laurent: Reworked driver to use dtschema

 .../bindings/media/qcom,sdm845-camss.yaml     | 394 ++++++++++++++++++
 1 file changed, 394 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml

-- 
2.27.0

Comments

Rob Herring (Arm) Jan. 21, 2021, 4:01 p.m. UTC | #1
On Wed, 20 Jan 2021 14:43:51 +0100, Robert Foss wrote:
> Signed-off-by: Robert Foss <robert.foss@linaro.org>

> ---

> 

> Changes since v1:

>  - Laurent: Reworked driver to use dtschema

> 

>  .../bindings/media/qcom,sdm845-camss.yaml     | 394 ++++++++++++++++++

>  1 file changed, 394 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml

> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml:394:1: [warning] too many blank lines (2 > 1) (empty-lines)

dtschema/dtc warnings/errors:

See https://patchwork.ozlabs.org/patch/1429446

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
new file mode 100644
index 000000000000..40864a5ab2c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sdm845-camss.yaml
@@ -0,0 +1,394 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sdm845-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+  - Todor Tomov <todor.too@gmail.com>
+
+description: |
+  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+  compatible:
+    const: qcom,sdm845-camss
+
+  clocks:
+    description:
+      Input clocks for the hardware block.
+    minItems: 36
+    maxItems: 36
+
+  clock-names:
+    description:
+      Names of input clocks for the hardware block.
+    items:
+      - const: camnoc_axi
+      - const: cpas_ahb
+      - const: cphy_rx_src
+      - const: csi0
+      - const: csi0_src
+      - const: csi1
+      - const: csi1_src
+      - const: csi2
+      - const: csi2_src
+      - const: csiphy0
+      - const: csiphy0_timer
+      - const: csiphy0_timer_src
+      - const: csiphy1
+      - const: csiphy1_timer
+      - const: csiphy1_timer_src
+      - const: csiphy2
+      - const: csiphy2_timer
+      - const: csiphy2_timer_src
+      - const: csiphy3
+      - const: csiphy3_timer
+      - const: csiphy3_timer_src
+      - const: gcc_camera_ahb
+      - const: gcc_camera_axi
+      - const: slow_ahb_src
+      - const: soc_ahb
+      - const: vfe0_axi
+      - const: vfe0
+      - const: vfe0_cphy_rx
+      - const: vfe0_src
+      - const: vfe1_axi
+      - const: vfe1
+      - const: vfe1_cphy_rx
+      - const: vfe1_src
+      - const: vfe_lite
+      - const: vfe_lite_cphy_rx
+      - const: vfe_lite_src
+
+  interrupts:
+    description:
+      IRQs for the hardware block.
+    minItems: 10
+    maxItems: 10
+
+  interrupt-names:
+    description:
+      Names of IRQs for the hardware block.
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  iommus:
+    maxItems: 4
+
+  power-domains:
+    maxItems: 3
+
+  ports:
+    description:
+      The CSI data input ports.
+
+    type: object
+
+    properties:
+      port@0:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+      port@1:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+      port@2:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+      port@3:
+        type: object
+        description: Input node for receiving CSI data.
+        properties:
+          endpoint:
+            type: object
+
+            properties:
+              clock-lanes:
+                description: |-
+                  The physical clock lane index.
+
+              data-lanes:
+                description: |-
+                  An array of physical data lanes indexes.
+                  Position of an entry determines the logical
+                  lane number, while the value of an entry
+                  indicates physical lane index.
+
+            required:
+              - clock-lanes
+              - data-lanes
+
+        required:
+          - endpoint
+          - reg
+
+  reg:
+    minItems: 10
+    maxItems: 10
+
+  reg-names:
+    items:
+      - const: csid0
+      - const: csid1
+      - const: csid2
+      - const: csiphy0
+      - const: csiphy1
+      - const: csiphy2
+      - const: csiphy3
+      - const: vfe0
+      - const: vfe1
+      - const: vfe_lite
+
+  vdda-supply:
+    description:
+      Definition of the regulator used as analog power supply.
+
+required:
+  - clock-names
+  - clocks
+  - compatible
+  - interrupt-names
+  - interrupts
+  - iommus
+  - power-domains
+  - reg
+  - reg-names
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,camcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      camss: camss@a00000 {
+        compatible = "qcom,sdm845-camss";
+
+        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
+          <&clock_camcc CAM_CC_CPAS_AHB_CLK>,
+          <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY0_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY1_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY2_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+          <&clock_camcc CAM_CC_CSIPHY3_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
+          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+          <&gcc GCC_CAMERA_AHB_CLK>,
+          <&gcc GCC_CAMERA_AXI_CLK>,
+          <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+          <&clock_camcc CAM_CC_SOC_AHB_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_0_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_1_CLK_SRC>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+          <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>;
+
+        clock-names = "camnoc_axi",
+          "cpas_ahb",
+          "cphy_rx_src",
+          "csi0",
+          "csi0_src",
+          "csi1",
+          "csi1_src",
+          "csi2",
+          "csi2_src",
+          "csiphy0",
+          "csiphy0_timer",
+          "csiphy0_timer_src",
+          "csiphy1",
+          "csiphy1_timer",
+          "csiphy1_timer_src",
+          "csiphy2",
+          "csiphy2_timer",
+          "csiphy2_timer_src",
+          "csiphy3",
+          "csiphy3_timer",
+          "csiphy3_timer_src",
+          "gcc_camera_ahb",
+          "gcc_camera_axi",
+          "slow_ahb_src",
+          "soc_ahb",
+          "vfe0_axi",
+          "vfe0",
+          "vfe0_cphy_rx",
+          "vfe0_src",
+          "vfe1_axi",
+          "vfe1",
+          "vfe1_cphy_rx",
+          "vfe1_src",
+          "vfe_lite",
+          "vfe_lite_cphy_rx",
+          "vfe_lite_src";
+
+        interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+          <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+
+        interrupt-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        iommus = <&apps_smmu 0x0808 0x0>,
+          <&apps_smmu 0x0810 0x8>,
+          <&apps_smmu 0x0c08 0x0>,
+          <&apps_smmu 0x0c10 0x8>;
+
+        power-domains = <&clock_camcc IFE_0_GDSC>,
+          <&clock_camcc IFE_1_GDSC>,
+          <&clock_camcc TITAN_TOP_GDSC>;
+
+        reg = <0 0xacb3000 0 0x1000>,
+          <0 0xacba000 0 0x1000>,
+          <0 0xacc8000 0 0x1000>,
+          <0 0xac65000 0 0x1000>,
+          <0 0xac66000 0 0x1000>,
+          <0 0xac67000 0 0x1000>,
+          <0 0xac68000 0 0x1000>,
+          <0 0xacaf000 0 0x4000>,
+          <0 0xacb6000 0 0x4000>,
+          <0 0xacc4000 0 0x4000>;
+
+        reg-names = "csid0",
+          "csid1",
+          "csid2",
+          "csiphy0",
+          "csiphy1",
+          "csiphy2",
+          "csiphy3",
+          "vfe0",
+          "vfe1",
+          "vfe_lite";
+
+        vdda-supply = <&reg_2v8>;
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+        };
+      };
+    };
+
+