diff mbox series

[RFC,v3,4/8] net: sparx5: add port module support

Message ID 20210115135339.3127198-5-steen.hegelund@microchip.com
State Superseded
Headers show
Series Adding the Sparx5 Switch Driver | expand

Commit Message

Steen Hegelund Jan. 15, 2021, 1:53 p.m. UTC
This add configuration of the Sparx5 port module instances.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 .../net/ethernet/microchip/sparx5/Makefile    |    3 +-
 .../ethernet/microchip/sparx5/sparx5_main.c   |   24 +-
 .../ethernet/microchip/sparx5/sparx5_netdev.c |   14 +-
 .../microchip/sparx5/sparx5_phylink.c         |   37 +-
 .../ethernet/microchip/sparx5/sparx5_port.c   | 1123 +++++++++++++++++
 .../ethernet/microchip/sparx5/sparx5_port.h   |   98 ++
 6 files changed, 1288 insertions(+), 11 deletions(-)
 create mode 100644 drivers/net/ethernet/microchip/sparx5/sparx5_port.c
 create mode 100644 drivers/net/ethernet/microchip/sparx5/sparx5_port.h
diff mbox series

Patch

diff --git a/drivers/net/ethernet/microchip/sparx5/Makefile b/drivers/net/ethernet/microchip/sparx5/Makefile
index 19a593d17f4a..9c14eec33fd7 100644
--- a/drivers/net/ethernet/microchip/sparx5/Makefile
+++ b/drivers/net/ethernet/microchip/sparx5/Makefile
@@ -5,4 +5,5 @@ 
 
 obj-$(CONFIG_SPARX5_SWITCH) += sparx5-switch.o
 
-sparx5-switch-objs  := sparx5_main.o sparx5_packet.o sparx5_netdev.o sparx5_phylink.o
+sparx5-switch-objs  := sparx5_main.o sparx5_packet.o \
+ sparx5_netdev.o sparx5_port.o sparx5_phylink.o
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index 6919e673ceb8..4b43e3212658 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -26,6 +26,7 @@ 
 
 #include "sparx5_main_regs.h"
 #include "sparx5_main.h"
+#include "sparx5_port.h"
 
 #define QLIM_WM(fraction) \
 	((SPX5_BUFFER_MEMORY / SPX5_BUFFER_CELL_SZ - 100) * (fraction) / 100)
@@ -248,6 +249,8 @@  static int sparx5_create_port(struct sparx5 *sparx5,
 {
 	struct sparx5_port *spx5_port;
 	struct net_device *ndev;
+	struct phylink *phylink;
+	int err;
 
 	ndev = sparx5_create_netdev(sparx5, config->portno);
 	if (IS_ERR(ndev)) {
@@ -267,11 +270,28 @@  static int sparx5_create_port(struct sparx5 *sparx5,
 	spx5_port->custom_etype = 0x8880; /* Vitesse */
 	sparx5->ports[config->portno] = spx5_port;
 
+	err = sparx5_port_init(sparx5, spx5_port, &config->conf);
+	if (err) {
+		dev_err(sparx5->dev, "port init failed\n");
+		return err;
+	}
 	spx5_port->conf = config->conf;
 
-	/* VLAN setup to be added in later patches */
+	/* VLAN support to be added in later patches */
+
+	/* Create a phylink for PHY management.  Also handles SFPs */
+	spx5_port->phylink_config.dev = &spx5_port->ndev->dev;
+	spx5_port->phylink_config.type = PHYLINK_NETDEV;
+	spx5_port->phylink_config.pcs_poll = true;
+
+	phylink = phylink_create(&spx5_port->phylink_config,
+				 of_fwnode_handle(config->node),
+				 config->conf.phy_mode,
+				 &sparx5_phylink_mac_ops);
+	if (IS_ERR(phylink))
+		return PTR_ERR(phylink);
 
-	/* PHYLINK setup to be added in later patches */
+	spx5_port->phylink = phylink;
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
index 0c3dfffedda4..879994668c23 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_netdev.c
@@ -6,6 +6,7 @@ 
 
 #include "sparx5_main_regs.h"
 #include "sparx5_main.h"
+#include "sparx5_port.h"
 
 /* The IFH bit position of the first VSTAX bit. This is because the
  * VSTAX bit positions in Data sheet is starting from zero.
@@ -71,6 +72,7 @@  static int sparx5_port_open(struct net_device *ndev)
 	struct sparx5_port *port = netdev_priv(ndev);
 	int err = 0;
 
+	sparx5_port_enable(port, true);
 	err = phylink_of_phy_connect(port->phylink, port->of_node, 0);
 	if (err) {
 		netdev_err(ndev, "Could not attach to PHY\n");
@@ -82,7 +84,10 @@  static int sparx5_port_open(struct net_device *ndev)
 	if (!ndev->phydev) {
 		/* power up serdes */
 		port->conf.power_down = false;
-		err = phy_power_on(port->serdes);
+		if (port->conf.serdes_reset)
+			err = sparx5_serdes_set(port->sparx5, port, &port->conf);
+		else
+			err = phy_power_on(port->serdes);
 		if (err)
 			netdev_err(ndev, "%s failed\n", __func__);
 	}
@@ -95,12 +100,17 @@  static int sparx5_port_stop(struct net_device *ndev)
 	struct sparx5_port *port = netdev_priv(ndev);
 	int err = 0;
 
+	sparx5_port_enable(port, false);
 	phylink_stop(port->phylink);
 	phylink_disconnect_phy(port->phylink);
 
 	if (!ndev->phydev) {
+		/* power down serdes */
 		port->conf.power_down = true;
-		err = phy_power_off(port->serdes);
+		if (port->conf.serdes_reset)
+			err = sparx5_serdes_set(port->sparx5, port, &port->conf);
+		else
+			err = phy_power_off(port->serdes);
 		if (err)
 			netdev_err(ndev, "%s failed\n", __func__);
 	}
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
index 6d695994a7b0..652d7fd52667 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_phylink.c
@@ -12,6 +12,7 @@ 
 
 #include "sparx5_main_regs.h"
 #include "sparx5_main.h"
+#include "sparx5_port.h"
 
 static void sparx5_phylink_validate(struct phylink_config *config,
 				    unsigned long *supported,
@@ -94,6 +95,7 @@  static void sparx5_phylink_mac_config(struct phylink_config *config,
 {
 	struct sparx5_port *port = netdev_priv(to_net_dev(config->dev));
 	struct sparx5_port_config conf;
+	int err = 0;
 
 	conf = port->conf;
 	conf.power_down = false;
@@ -126,6 +128,11 @@  static void sparx5_phylink_mac_config(struct phylink_config *config,
 
 	if (!port_conf_has_changed(&port->conf, &conf))
 		return;
+
+	/* Enable the PCS matching this interface type */
+	err = sparx5_port_pcs_set(port->sparx5, port, &conf);
+	if (err)
+		netdev_err(port->ndev, "port config failed: %d\n", err);
 }
 
 static void sparx5_phylink_mac_link_up(struct phylink_config *config,
@@ -135,17 +142,35 @@  static void sparx5_phylink_mac_link_up(struct phylink_config *config,
 				       int speed, int duplex,
 				       bool tx_pause, bool rx_pause)
 {
-	/* Currently not used */
+	struct sparx5_port *port = netdev_priv(to_net_dev(config->dev));
+	struct sparx5_port_config conf;
+	int err = 0;
+
+	conf = port->conf;
+	conf.duplex = duplex;
+	conf.pause = 0;
+	conf.pause |= tx_pause ? MLO_PAUSE_TX : 0;
+	conf.pause |= rx_pause ? MLO_PAUSE_RX : 0;
+	conf.speed = speed;
+
+	/* Configure the port to speed/duplex/pause */
+	err = sparx5_port_config(port->sparx5, port, &conf);
+	if (err)
+		netdev_err(port->ndev, "port config failed: %d\n", err);
 }
 
 static void sparx5_phylink_mac_link_state(struct phylink_config *config,
 					  struct phylink_link_state *state)
 {
-	state->link = true;
-	state->an_complete = true;
-	state->speed = SPEED_1000;
-	state->duplex = true;
-	state->pause = MLO_PAUSE_AN;
+	struct sparx5_port *port = netdev_priv(to_net_dev(config->dev));
+	struct sparx5_port_status status;
+
+	sparx5_get_port_status(port->sparx5, port, &status);
+	state->link = status.link && !status.link_down;
+	state->an_complete = status.an_complete;
+	state->speed = status.speed;
+	state->duplex = status.duplex;
+	state->pause = status.pause;
 }
 
 static void sparx5_phylink_mac_aneg_restart(struct phylink_config *config)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
new file mode 100644
index 000000000000..64e21b23368f
--- /dev/null
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c
@@ -0,0 +1,1123 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/* Microchip Sparx5 Switch driver
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+
+#include "sparx5_main_regs.h"
+#include "sparx5_main.h"
+#include "sparx5_port.h"
+
+#define SPX5_ETYPE_TAG_C     0x8100
+#define SPX5_ETYPE_TAG_S     0x88a8
+
+#define SPX5_WAIT_US         1000
+#define SPX5_WAIT_MAX_US     2000
+
+enum port_error {
+	SPX5_PERR_SPEED,
+	SPX5_PERR_IFTYPE,
+};
+
+#define PAUSE_DISCARD 0xC
+
+static void decode_sgmii_word(u16 lp_abil, struct sparx5_port_status *status)
+{
+	status->an_complete = true;
+	if (!(lp_abil & LPA_SGMII_LINK)) {
+		status->link = false;
+		return;
+	}
+
+	switch (lp_abil & LPA_SGMII_SPD_MASK) {
+	case LPA_SGMII_10:
+		status->speed = SPEED_10;
+		break;
+	case LPA_SGMII_100:
+		status->speed = SPEED_100;
+		break;
+	case LPA_SGMII_1000:
+		status->speed = SPEED_1000;
+		break;
+	default:
+		status->link = false;
+		return;
+	}
+	if (lp_abil & LPA_SGMII_FULL_DUPLEX)
+		status->duplex = DUPLEX_FULL;
+	else
+		status->duplex = DUPLEX_HALF;
+}
+
+static void decode_cl37_word(u16 lp_abil, uint16_t ld_abil, struct sparx5_port_status *status)
+{
+	status->link = !(lp_abil & ADVERTISE_RFAULT) && status->link;
+	status->an_complete = true;
+	status->duplex = (ADVERTISE_1000XFULL & lp_abil) ?
+		DUPLEX_FULL : DUPLEX_UNKNOWN; // 1G HDX not supported
+
+	if ((ld_abil & ADVERTISE_1000XPAUSE) &&
+	    (lp_abil & ADVERTISE_1000XPAUSE)) {
+		status->pause = MLO_PAUSE_RX | MLO_PAUSE_TX;
+	} else if ((ld_abil & ADVERTISE_1000XPSE_ASYM) &&
+		   (lp_abil & ADVERTISE_1000XPSE_ASYM)) {
+		status->pause |= (lp_abil & ADVERTISE_1000XPAUSE) ?
+			MLO_PAUSE_TX : 0;
+		status->pause |= (ld_abil & ADVERTISE_1000XPAUSE) ?
+			MLO_PAUSE_RX : 0;
+	} else {
+		status->pause = MLO_PAUSE_NONE;
+	}
+}
+
+static int sparx5_get_dev2g5_status(struct sparx5 *sparx5,
+				    struct sparx5_port *port,
+				    struct sparx5_port_status *status)
+{
+	u32 portno = port->portno;
+	u16 lp_adv, ld_adv;
+	u32 value;
+
+	/* Get PCS Link down sticky */
+	value = spx5_rd(sparx5, DEV2G5_PCS1G_STICKY(portno));
+	status->link_down = DEV2G5_PCS1G_STICKY_LINK_DOWN_STICKY_GET(value);
+	if (status->link_down)	/* Clear the sticky */
+		spx5_wr(value, sparx5, DEV2G5_PCS1G_STICKY(portno));
+
+	/* Get both current Link and Sync status */
+	value = spx5_rd(sparx5, DEV2G5_PCS1G_LINK_STATUS(portno));
+	status->link = DEV2G5_PCS1G_LINK_STATUS_LINK_STATUS_GET(value) &&
+		       DEV2G5_PCS1G_LINK_STATUS_SYNC_STATUS_GET(value);
+
+	if (port->conf.portmode == PHY_INTERFACE_MODE_1000BASEX)
+		status->speed = SPEED_1000;
+	else if (port->conf.portmode == PHY_INTERFACE_MODE_2500BASEX)
+		status->speed = SPEED_2500;
+
+	status->duplex = DUPLEX_FULL;
+
+	/* Get PCS ANEG status register */
+	value = spx5_rd(sparx5, DEV2G5_PCS1G_ANEG_STATUS(portno));
+
+	/* Aneg complete provides more information  */
+	if (DEV2G5_PCS1G_ANEG_STATUS_ANEG_COMPLETE_GET(value)) {
+		lp_adv = DEV2G5_PCS1G_ANEG_STATUS_LP_ADV_ABILITY_GET(value);
+		if (port->conf.portmode == PHY_INTERFACE_MODE_SGMII) {
+			decode_sgmii_word(lp_adv, status);
+		} else {
+			value = spx5_rd(sparx5, DEV2G5_PCS1G_ANEG_CFG(portno));
+			ld_adv = DEV2G5_PCS1G_ANEG_CFG_ADV_ABILITY_GET(value);
+			decode_cl37_word(lp_adv, ld_adv, status);
+		}
+	}
+	return 0;
+}
+
+static int sparx5_get_sfi_status(struct sparx5 *sparx5,
+				 struct sparx5_port *port,
+				 struct sparx5_port_status *status)
+{
+	bool high_speed_dev = sparx5_is_high_speed_device(&port->conf);
+	u32 portno = port->portno;
+	u32 value, dev, tinst;
+	void __iomem *inst;
+
+	if (!high_speed_dev) {
+		netdev_err(port->ndev, "error: low speed and SFI mode\n");
+		return -EINVAL;
+	}
+
+	dev = sparx5_to_high_dev(portno);
+	tinst = sparx5_port_dev_index(portno);
+	inst = spx5_inst_get(sparx5, dev, tinst);
+
+	value = spx5_inst_rd(inst, DEV10G_MAC_TX_MONITOR_STICKY(0));
+	if (value != DEV10G_MAC_TX_MONITOR_STICKY_IDLE_STATE_STICKY) {
+		/* The link is or has been down. Clear the sticky bit */
+		status->link_down = 1;
+		spx5_inst_wr(0xffffffff, inst, DEV10G_MAC_TX_MONITOR_STICKY(0));
+		value = spx5_inst_rd(inst, DEV10G_MAC_TX_MONITOR_STICKY(0));
+	}
+	status->link = (value == DEV10G_MAC_TX_MONITOR_STICKY_IDLE_STATE_STICKY);
+	status->speed = port->conf.speed;
+	status->duplex = DUPLEX_FULL;
+	return 0;
+}
+
+/* Get link status of 1000Base-X/in-band and SFI ports.
+ */
+int sparx5_get_port_status(struct sparx5 *sparx5,
+			   struct sparx5_port *port,
+			   struct sparx5_port_status *status)
+{
+	memset(status, 0, sizeof(*status));
+	status->speed = port->conf.speed;
+	if (port->conf.power_down) {
+		status->link = false;
+		return 0;
+	}
+	switch (port->conf.portmode) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_2500BASEX:
+		return sparx5_get_dev2g5_status(sparx5, port, status);
+	case PHY_INTERFACE_MODE_10GBASER:
+		return sparx5_get_sfi_status(sparx5, port, status);
+	case PHY_INTERFACE_MODE_NA:
+		return 0;
+	default:
+		netdev_err(port->ndev, "Status not supported");
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int sparx5_port_error(struct sparx5_port *port,
+			     struct sparx5_port_config *conf,
+			     enum port_error errtype)
+{
+	switch (errtype) {
+	case SPX5_PERR_SPEED:
+		netdev_err(port->ndev,
+			   "Interface does not support speed: %u: for %s\n",
+			   conf->speed, phy_modes(conf->portmode));
+		break;
+	case SPX5_PERR_IFTYPE:
+		netdev_err(port->ndev,
+			   "Switch port does not support interface type: %s\n",
+			   phy_modes(conf->portmode));
+		break;
+	default:
+		netdev_err(port->ndev,
+			   "Interface configuration error\n");
+	}
+
+	return -EINVAL;
+}
+
+static int sparx5_port_verify_speed(struct sparx5 *sparx5,
+				    struct sparx5_port *port,
+				    struct sparx5_port_config *conf)
+{
+	if ((sparx5_port_is_2g5(port->portno) &&
+	     conf->speed > SPEED_2500) ||
+	    (sparx5_port_is_5g(port->portno)  &&
+	     conf->speed > SPEED_5000) ||
+	    (sparx5_port_is_10g(port->portno) &&
+	     conf->speed > SPEED_10000))
+		return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
+
+	switch (conf->portmode) {
+	case PHY_INTERFACE_MODE_NA:
+		return -EINVAL;
+	case PHY_INTERFACE_MODE_1000BASEX:
+		if (conf->speed != SPEED_1000 ||
+		    sparx5_port_is_2g5(port->portno))
+			return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
+		if (sparx5_port_is_2g5(port->portno))
+			return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE);
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		if (conf->speed != SPEED_2500 ||
+		    sparx5_port_is_2g5(port->portno))
+			return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
+		break;
+	case PHY_INTERFACE_MODE_QSGMII:
+		if (port->portno > 47)
+			return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE);
+		fallthrough;
+	case PHY_INTERFACE_MODE_SGMII:
+		if (conf->speed != SPEED_1000 &&
+		    conf->speed != SPEED_100 &&
+		    conf->speed != SPEED_10 &&
+		    conf->speed != SPEED_2500)
+			return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
+		break;
+	case PHY_INTERFACE_MODE_10GBASER:
+		if ((conf->speed != SPEED_5000 &&
+		     conf->speed != SPEED_10000 &&
+		     conf->speed != SPEED_25000))
+			return sparx5_port_error(port, conf, SPX5_PERR_SPEED);
+		break;
+	default:
+		return sparx5_port_error(port, conf, SPX5_PERR_IFTYPE);
+	}
+	return 0;
+}
+
+static bool sparx5_dev_change(struct sparx5 *sparx5,
+			      struct sparx5_port *port,
+			      struct sparx5_port_config *conf)
+{
+	if (port->conf.portmode != conf->portmode)
+		if (port->conf.portmode == PHY_INTERFACE_MODE_10GBASER ||
+		    conf->portmode == PHY_INTERFACE_MODE_10GBASER)
+			return true;
+
+	return false;
+}
+
+static int sparx5_port_flush_poll(struct sparx5 *sparx5, u32 portno)
+{
+	u32  value, resource, prio, delay_cnt = 0;
+	bool poll_src = true;
+	char *mem = "";
+
+	/* Resource == 0: Memory tracked per source (SRC-MEM)
+	 * Resource == 1: Frame references tracked per source (SRC-REF)
+	 * Resource == 2: Memory tracked per destination (DST-MEM)
+	 * Resource == 3: Frame references tracked per destination. (DST-REF)
+	 */
+	while (1) {
+		bool empty = true;
+
+		for (resource = 0; resource < (poll_src ? 2 : 1); resource++) {
+			u32 base;
+
+			base = (resource == 0 ? 2048 : 0) + SPX5_PRIOS * portno;
+			for (prio = 0; prio < SPX5_PRIOS; prio++) {
+				value = spx5_rd(sparx5,
+						QRES_RES_STAT(base + prio));
+				if (value) {
+					mem = resource == 0 ?
+						"DST-MEM" : "SRC-MEM";
+					empty = false;
+				}
+			}
+		}
+
+		if (empty)
+			break;
+
+		if (delay_cnt++ == 2000) {
+			dev_err(sparx5->dev,
+				"Flush timeout port %u. %s queue not empty\n",
+				portno, mem);
+			return -EINVAL;
+		}
+
+		usleep_range(SPX5_WAIT_US, SPX5_WAIT_MAX_US);
+	}
+	return 0;
+}
+
+static int sparx5_port_disable(struct sparx5 *sparx5, struct sparx5_port *port, bool high_spd_dev)
+{
+	u32 tinst = high_spd_dev ?
+		    sparx5_port_dev_index(port->portno) : port->portno;
+	u32 dev = high_spd_dev ?
+		  sparx5_to_high_dev(port->portno) : TARGET_DEV2G5;
+	void __iomem *devinst = spx5_inst_get(sparx5, dev, tinst);
+	u32 spd = port->conf.speed;
+	u32 spd_prm;
+	int err;
+
+	if (high_spd_dev) {
+		/* 1: Reset the PCS Rx clock domain  */
+		spx5_inst_rmw(DEV10G_DEV_RST_CTRL_PCS_RX_RST,
+			      DEV10G_DEV_RST_CTRL_PCS_RX_RST,
+			      devinst,
+			      DEV10G_DEV_RST_CTRL(0));
+
+		/* 2: Disable MAC frame reception */
+		spx5_inst_rmw(0,
+			      DEV10G_MAC_ENA_CFG_RX_ENA,
+			      devinst,
+			      DEV10G_MAC_ENA_CFG(0));
+	} else {
+		/* 1: Reset the PCS Rx clock domain  */
+		spx5_inst_rmw(DEV2G5_DEV_RST_CTRL_PCS_RX_RST,
+			      DEV2G5_DEV_RST_CTRL_PCS_RX_RST,
+			      devinst,
+			      DEV2G5_DEV_RST_CTRL(0));
+		/* 2: Disable MAC frame reception */
+		spx5_inst_rmw(0,
+			      DEV2G5_MAC_ENA_CFG_RX_ENA,
+			      devinst,
+			      DEV2G5_MAC_ENA_CFG(0));
+	}
+	/* 3: Disable traffic being sent to or from switch port->portno */
+	spx5_rmw(0,
+		 QFWD_SWITCH_PORT_MODE_PORT_ENA,
+		 sparx5,
+		 QFWD_SWITCH_PORT_MODE(port->portno));
+
+	/* 4: Disable dequeuing from the egress queues  */
+	spx5_rmw(HSCH_PORT_MODE_DEQUEUE_DIS,
+		 HSCH_PORT_MODE_DEQUEUE_DIS,
+		 sparx5,
+		 HSCH_PORT_MODE(port->portno));
+
+	/* 5: Disable Flowcontrol */
+	spx5_rmw(QSYS_PAUSE_CFG_PAUSE_STOP_SET(0xFFF - 1),
+		 QSYS_PAUSE_CFG_PAUSE_STOP,
+		 sparx5,
+		 QSYS_PAUSE_CFG(port->portno));
+
+	spd_prm = spd == SPEED_10 ? 1000 : spd == SPEED_100 ? 100 : 10;
+	/* 6: Wait while the last frame is exiting the queues */
+	usleep_range(8 * spd_prm, 10 * spd_prm);
+
+	/* 7: Flush the queues accociated with the port->portno */
+	spx5_rmw(HSCH_FLUSH_CTRL_FLUSH_PORT_SET(port->portno) |
+		 HSCH_FLUSH_CTRL_FLUSH_DST_SET(1) |
+		 HSCH_FLUSH_CTRL_FLUSH_SRC_SET(1) |
+		 HSCH_FLUSH_CTRL_FLUSH_ENA_SET(1),
+		 HSCH_FLUSH_CTRL_FLUSH_PORT |
+		 HSCH_FLUSH_CTRL_FLUSH_DST |
+		 HSCH_FLUSH_CTRL_FLUSH_SRC |
+		 HSCH_FLUSH_CTRL_FLUSH_ENA,
+		 sparx5,
+		 HSCH_FLUSH_CTRL);
+
+	/* 8: Enable dequeuing from the egress queues */
+	spx5_rmw(0,
+		 HSCH_PORT_MODE_DEQUEUE_DIS,
+		 sparx5,
+		 HSCH_PORT_MODE(port->portno));
+
+	/* 9: Wait until flushing is complete */
+	err = sparx5_port_flush_poll(sparx5, port->portno);
+	if (err)
+		return err;
+
+	/* 10: Reset the  MAC clock domain */
+	if (high_spd_dev) {
+		spx5_inst_rmw(DEV10G_DEV_RST_CTRL_PCS_TX_RST_SET(1) |
+			      DEV10G_DEV_RST_CTRL_MAC_RX_RST_SET(1) |
+			      DEV10G_DEV_RST_CTRL_MAC_TX_RST_SET(1),
+			      DEV10G_DEV_RST_CTRL_PCS_TX_RST |
+			      DEV10G_DEV_RST_CTRL_MAC_RX_RST |
+			      DEV10G_DEV_RST_CTRL_MAC_TX_RST,
+			      devinst,
+			      DEV10G_DEV_RST_CTRL(0));
+
+	} else {
+		spx5_inst_rmw(DEV2G5_DEV_RST_CTRL_SPEED_SEL_SET(3) |
+			      DEV2G5_DEV_RST_CTRL_PCS_TX_RST_SET(1) |
+			      DEV2G5_DEV_RST_CTRL_PCS_RX_RST_SET(1) |
+			      DEV2G5_DEV_RST_CTRL_MAC_TX_RST_SET(1) |
+			      DEV2G5_DEV_RST_CTRL_MAC_RX_RST_SET(1),
+			      DEV2G5_DEV_RST_CTRL_SPEED_SEL |
+			      DEV2G5_DEV_RST_CTRL_PCS_TX_RST |
+			      DEV2G5_DEV_RST_CTRL_PCS_RX_RST |
+			      DEV2G5_DEV_RST_CTRL_MAC_TX_RST |
+			      DEV2G5_DEV_RST_CTRL_MAC_RX_RST,
+			      devinst,
+			      DEV2G5_DEV_RST_CTRL(0));
+	}
+	/* 11: Clear flushing */
+	spx5_rmw(HSCH_FLUSH_CTRL_FLUSH_PORT_SET(port->portno) |
+		 HSCH_FLUSH_CTRL_FLUSH_ENA_SET(0),
+		 HSCH_FLUSH_CTRL_FLUSH_PORT |
+		 HSCH_FLUSH_CTRL_FLUSH_ENA,
+		 sparx5,
+		 HSCH_FLUSH_CTRL);
+
+	if (high_spd_dev) {
+		u32 pcs = sparx5_to_pcs_dev(port->portno);
+		void __iomem *pcsinst = spx5_inst_get(sparx5, pcs, tinst);
+
+		/* 12: Disable 5G/10G/25 BaseR PCS */
+		spx5_inst_rmw(PCS10G_BR_PCS_CFG_PCS_ENA_SET(0),
+			      PCS10G_BR_PCS_CFG_PCS_ENA,
+			      pcsinst,
+			      PCS10G_BR_PCS_CFG(0));
+
+		if (sparx5_port_is_25g(port->portno))
+			/* Disable 25G PCS */
+			spx5_rmw(DEV25G_PCS25G_CFG_PCS25G_ENA_SET(0),
+				 DEV25G_PCS25G_CFG_PCS25G_ENA,
+				 sparx5,
+				 DEV25G_PCS25G_CFG(tinst));
+	} else {
+		/* 12: Disable 1G PCS */
+		spx5_rmw(DEV2G5_PCS1G_CFG_PCS_ENA_SET(0),
+			 DEV2G5_PCS1G_CFG_PCS_ENA,
+			 sparx5,
+			 DEV2G5_PCS1G_CFG(port->portno));
+	}
+
+	/* The port is now flushed and disabled  */
+	return 0;
+}
+
+static int sparx5_port_fifo_sz(struct sparx5 *sparx5,
+			       u32 portno, u32 speed)
+{
+	u32 sys_clk = sparx5_clk_period(sparx5->coreclock);
+	const u32 taxi_dist[SPX5_PORTS_ALL] = {
+		6, 8, 10, 6, 8, 10, 6, 8, 10, 6, 8, 10,
+		4, 4, 4, 4,
+		11, 12, 13, 14, 15, 16, 17, 18,
+		11, 12, 13, 14, 15, 16, 17, 18,
+		11, 12, 13, 14, 15, 16, 17, 18,
+		11, 12, 13, 14, 15, 16, 17, 18,
+		4, 6, 8, 4, 6, 8, 6, 8,
+		2, 2, 2, 2, 2, 2, 2, 4, 2
+	};
+	u32 mac_per    = 6400, tmp1, tmp2, tmp3;
+	u32 fifo_width = 16;
+	u32 mac_width  = 8;
+	u32 addition   = 0;
+
+	switch (speed) {
+	case SPEED_25000:
+		return 0;
+	case SPEED_10000:
+		mac_per = 6400;
+		mac_width = 8;
+		addition = 1;
+		break;
+	case SPEED_5000:
+		mac_per = 12800;
+		mac_width = 8;
+		addition = 0;
+		break;
+	case SPEED_2500:
+		mac_per = 3200;
+		mac_width = 1;
+		addition = 0;
+		break;
+	case SPEED_1000:
+		mac_per =  8000;
+		mac_width = 1;
+		addition = 0;
+		break;
+	case SPEED_100:
+	case SPEED_10:
+		return 1;
+	default:
+		break;
+	}
+
+	tmp1 = 1000 * mac_width / fifo_width;
+	tmp2 = 3000 + ((12000 + 2 * taxi_dist[portno] * 1000)
+		       * sys_clk / mac_per);
+	tmp3 = tmp1 * tmp2 / 1000;
+	return  (tmp3 + 2000 + 999) / 1000 + addition;
+}
+
+/* Configure port muxing:
+ * QSGMII:     4x2G5 devices
+ */
+static int sparx5_port_mux_set(struct sparx5 *sparx5,
+			       struct sparx5_port *port,
+			       struct sparx5_port_config *conf)
+{
+	u32 portno = port->portno;
+	u32 inst;
+
+	if (port->conf.portmode == conf->portmode)
+		return 0; /* Nothing to do */
+
+	switch (conf->portmode) {
+	case PHY_INTERFACE_MODE_QSGMII: /* QSGMII: 4x2G5 devices. Mode Q'  */
+		inst = (portno - portno % 4) / 4;
+		spx5_rmw(BIT(inst),
+			 BIT(inst),
+			 sparx5,
+			 PORT_CONF_QSGMII_ENA);
+
+		if ((portno / 4 % 2) == 0) {
+			/* Affects d0-d3,d8-d11..d40-d43 */
+			spx5_rmw(PORT_CONF_USGMII_CFG_BYPASS_SCRAM_SET(1) |
+				 PORT_CONF_USGMII_CFG_BYPASS_DESCRAM_SET(1) |
+				 PORT_CONF_USGMII_CFG_QUAD_MODE_SET(1),
+				 PORT_CONF_USGMII_CFG_BYPASS_SCRAM |
+				 PORT_CONF_USGMII_CFG_BYPASS_DESCRAM |
+				 PORT_CONF_USGMII_CFG_QUAD_MODE,
+				 sparx5,
+				 PORT_CONF_USGMII_CFG((portno / 8)));
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static int sparx5_port_max_tags_set(struct sparx5 *sparx5,
+				    struct sparx5_port *port)
+{
+	enum sparx5_port_max_tags max_tags    = port->max_vlan_tags;
+	int tag_ct          = max_tags == SPX5_PORT_MAX_TAGS_ONE ? 1 :
+			      max_tags == SPX5_PORT_MAX_TAGS_TWO ? 2 : 0;
+	bool dtag           = max_tags == SPX5_PORT_MAX_TAGS_TWO;
+	enum sparx5_vlan_port_type vlan_type  = port->vlan_type;
+	bool dotag          = max_tags != SPX5_PORT_MAX_TAGS_NONE;
+	u32 dev             = sparx5_to_high_dev(port->portno);
+	u32 tinst           = sparx5_port_dev_index(port->portno);
+	void __iomem *inst  = spx5_inst_get(sparx5, dev, tinst);
+	u32 etype;
+
+	etype = (vlan_type == SPX5_VLAN_PORT_TYPE_S_CUSTOM ?
+		 port->custom_etype :
+		 vlan_type == SPX5_VLAN_PORT_TYPE_C ?
+		 SPX5_ETYPE_TAG_C : SPX5_ETYPE_TAG_S);
+
+	spx5_wr(DEV2G5_MAC_TAGS_CFG_TAG_ID_SET(etype) |
+		DEV2G5_MAC_TAGS_CFG_PB_ENA_SET(dtag) |
+		DEV2G5_MAC_TAGS_CFG_VLAN_AWR_ENA_SET(dotag) |
+		DEV2G5_MAC_TAGS_CFG_VLAN_LEN_AWR_ENA_SET(dotag),
+		sparx5,
+		DEV2G5_MAC_TAGS_CFG(port->portno));
+
+	if (sparx5_port_is_2g5(port->portno))
+		return 0;
+
+	spx5_inst_rmw(DEV10G_MAC_TAGS_CFG_TAG_ID_SET(etype) |
+		      DEV10G_MAC_TAGS_CFG_TAG_ENA_SET(dotag),
+		      DEV10G_MAC_TAGS_CFG_TAG_ID |
+		      DEV10G_MAC_TAGS_CFG_TAG_ENA,
+		      inst,
+		      DEV10G_MAC_TAGS_CFG(0, 0));
+
+	spx5_inst_rmw(DEV10G_MAC_NUM_TAGS_CFG_NUM_TAGS_SET(tag_ct),
+		      DEV10G_MAC_NUM_TAGS_CFG_NUM_TAGS,
+		      inst,
+		      DEV10G_MAC_NUM_TAGS_CFG(0));
+
+	spx5_inst_rmw(DEV10G_MAC_MAXLEN_CFG_MAX_LEN_TAG_CHK_SET(dotag),
+		      DEV10G_MAC_MAXLEN_CFG_MAX_LEN_TAG_CHK,
+		      inst,
+		      DEV10G_MAC_MAXLEN_CFG(0));
+	return 0;
+}
+
+static int sparx5_port_fwd_urg(struct sparx5 *sparx5, u32 speed)
+{
+	u32 clk_period_ps = 1600; /* 625Mhz for now */
+	u32 urg = 672000;
+
+	switch (speed) {
+	case SPEED_10:
+	case SPEED_100:
+	case SPEED_1000:
+		urg = 672000;
+		break;
+	case SPEED_2500:
+		urg = 270000;
+		break;
+	case SPEED_5000:
+		urg = 135000;
+		break;
+	case SPEED_10000:
+		urg = 67200;
+		break;
+	case SPEED_25000:
+		urg = 27000;
+		break;
+	}
+	return urg / clk_period_ps - 1;
+}
+
+static u16 sparx5_wm_enc(u16 value)
+{
+	if (value >= 2048)
+		return 2048 + value / 16;
+
+	return value;
+}
+
+static int sparx5_port_fc_setup(struct sparx5 *sparx5,
+				struct sparx5_port *port,
+				struct sparx5_port_config *conf)
+{
+	bool fc_obey = conf->pause & MLO_PAUSE_RX ? 1 : 0;
+	u32 pause_stop = 0xFFF - 1; /* FC gen disabled */
+
+	if (conf->pause & MLO_PAUSE_TX) {
+		int maxlen = ETH_DATA_LEN + ETH_HLEN + ETH_FCS_LEN;
+
+		pause_stop = sparx5_wm_enc(4  * (maxlen / SPX5_BUFFER_CELL_SZ));
+	}
+
+	/* Set HDX flowcontrol */
+	spx5_rmw(DSM_MAC_CFG_HDX_BACKPREASSURE_SET(conf->duplex == DUPLEX_HALF),
+		 DSM_MAC_CFG_HDX_BACKPREASSURE,
+		 sparx5,
+		 DSM_MAC_CFG(port->portno));
+
+	/* Obey flowcontrol  */
+	spx5_rmw(DSM_RX_PAUSE_CFG_RX_PAUSE_EN_SET(fc_obey),
+		 DSM_RX_PAUSE_CFG_RX_PAUSE_EN,
+		 sparx5,
+		 DSM_RX_PAUSE_CFG(port->portno));
+
+	/* Disable forward pressure */
+	spx5_rmw(QSYS_FWD_PRESSURE_FWD_PRESSURE_DIS_SET(fc_obey),
+		 QSYS_FWD_PRESSURE_FWD_PRESSURE_DIS,
+		 sparx5,
+		 QSYS_FWD_PRESSURE(port->portno));
+
+	/* Generate pause frames */
+	spx5_rmw(QSYS_PAUSE_CFG_PAUSE_STOP_SET(pause_stop),
+		 QSYS_PAUSE_CFG_PAUSE_STOP,
+		 sparx5,
+		 QSYS_PAUSE_CFG(port->portno));
+
+	return 0;
+}
+
+static u16 sparx5_get_aneg_word(struct sparx5_port_config *conf)
+{
+	if (conf->portmode == PHY_INTERFACE_MODE_1000BASEX) /* cl-37 aneg */
+		return (ADVERTISE_LPACK |
+		(conf->pause == MLO_PAUSE_AN ? ADVERTISE_1000XPAUSE : 0)  |
+		(conf->pause == MLO_PAUSE_AN ? ADVERTISE_1000XPSE_ASYM : 0) |
+		ADVERTISE_1000XFULL);
+	else
+		return 1; /* Enable SGMII Aneg */
+}
+
+int sparx5_serdes_set(struct sparx5 *sparx5,
+		      struct sparx5_port *port,
+		      struct sparx5_port_config *conf)
+{
+	union phy_configure_opts opts = {
+		.eth_serdes.speed = conf->speed,
+		.eth_serdes.media_type = conf->media_type,
+	};
+	int err;
+
+	if (conf->portmode == PHY_INTERFACE_MODE_QSGMII &&
+	    ((port->portno % 4) != 0)) {
+		return 0;
+	}
+	err = phy_set_mode_ext(port->serdes, PHY_MODE_ETHERNET, conf->portmode);
+	if (err)
+		return err;
+	if (conf->serdes_reset) {
+		err = phy_reset(port->serdes);
+		if (err)
+			return err;
+	}
+	/* Configure SerDes with port parameters */
+	err = phy_configure(port->serdes, &opts);
+	if (err)
+		return err;
+	conf->serdes_reset = false;
+	return err;
+}
+
+static int sparx5_port_pcs_low_set(struct sparx5 *sparx5,
+				   struct sparx5_port *port,
+				   struct sparx5_port_config *conf)
+{
+	bool sgmii = false, inband_aneg = false;
+	int err;
+
+	if (!port->conf.has_sfp) {
+		sgmii = true; /* Phy is connnected to the MAC */
+	} else {
+		if (conf->portmode == PHY_INTERFACE_MODE_SGMII ||
+		    conf->portmode == PHY_INTERFACE_MODE_QSGMII)
+			inband_aneg = true; /* Cisco-SGMII in-band-aneg */
+		else if (conf->portmode == PHY_INTERFACE_MODE_1000BASEX &&
+			 conf->autoneg)
+			inband_aneg = true; /* Clause-37 in-band-aneg */
+
+		err = sparx5_serdes_set(sparx5, port, conf);
+		if (err)
+			return -EINVAL;
+	}
+
+	/* Choose SGMII or 1000BaseX/2500BaseX PCS mode */
+	spx5_rmw(DEV2G5_PCS1G_MODE_CFG_SGMII_MODE_ENA_SET(sgmii),
+		 DEV2G5_PCS1G_MODE_CFG_SGMII_MODE_ENA,
+		 sparx5,
+		 DEV2G5_PCS1G_MODE_CFG(port->portno));
+
+	/* Enable PCS */
+	spx5_wr(DEV2G5_PCS1G_CFG_PCS_ENA_SET(1),
+		sparx5,
+		DEV2G5_PCS1G_CFG(port->portno));
+
+	if (inband_aneg) {
+		u16 abil = sparx5_get_aneg_word(conf);
+
+		/* Enable in-band aneg */
+		spx5_wr(DEV2G5_PCS1G_ANEG_CFG_ADV_ABILITY_SET(abil) |
+			DEV2G5_PCS1G_ANEG_CFG_SW_RESOLVE_ENA_SET(1) |
+			DEV2G5_PCS1G_ANEG_CFG_ANEG_ENA_SET(1) |
+			DEV2G5_PCS1G_ANEG_CFG_ANEG_RESTART_ONE_SHOT_SET(1),
+			sparx5,
+			DEV2G5_PCS1G_ANEG_CFG(port->portno));
+	} else {
+		spx5_wr(0, sparx5, DEV2G5_PCS1G_ANEG_CFG(port->portno));
+	}
+
+	/* Take PCS out of reset */
+	spx5_rmw(DEV2G5_DEV_RST_CTRL_SPEED_SEL_SET(2) |
+		 DEV2G5_DEV_RST_CTRL_PCS_TX_RST_SET(0) |
+		 DEV2G5_DEV_RST_CTRL_PCS_RX_RST_SET(0),
+		 DEV2G5_DEV_RST_CTRL_SPEED_SEL |
+		 DEV2G5_DEV_RST_CTRL_PCS_TX_RST |
+		 DEV2G5_DEV_RST_CTRL_PCS_RX_RST,
+		 sparx5,
+		 DEV2G5_DEV_RST_CTRL(port->portno));
+
+	return 0;
+}
+
+static int sparx5_port_pcs_high_set(struct sparx5 *sparx5,
+				    struct sparx5_port *port,
+				    struct sparx5_port_config *conf)
+{
+	u32 pix               = sparx5_port_dev_index(port->portno);
+	u32 clk_spd           = conf->speed == SPEED_5000 ? 1 : 0;
+	u32 dev               = sparx5_to_high_dev(port->portno);
+	void __iomem *devinst = spx5_inst_get(sparx5, dev, pix);
+	u32 pcs               = sparx5_to_pcs_dev(port->portno);
+	void __iomem *pcsinst = spx5_inst_get(sparx5, pcs, pix);
+	int err;
+
+	/*  SFI : No in-band-aneg. Speeds 5G/10G/25G */
+
+	err = sparx5_serdes_set(sparx5, port, conf);
+	if (err)
+		return -EINVAL;
+
+	if (conf->speed == SPEED_25000) {
+		/* Enable PCS for 25G device, speed 25G */
+		spx5_rmw(DEV25G_PCS25G_CFG_PCS25G_ENA_SET(1),
+			 DEV25G_PCS25G_CFG_PCS25G_ENA,
+			 sparx5,
+			 DEV25G_PCS25G_CFG(pix));
+	} else {
+		/* Enable PCS for 5G/10G/25G devices, speed 5G/10G */
+		spx5_inst_rmw(PCS10G_BR_PCS_CFG_PCS_ENA_SET(1),
+			      PCS10G_BR_PCS_CFG_PCS_ENA,
+			      pcsinst,
+			      PCS10G_BR_PCS_CFG(0));
+	}
+
+	/* Enable 5G/10G/25G MAC module */
+	spx5_inst_wr(DEV10G_MAC_ENA_CFG_RX_ENA_SET(1) |
+		     DEV10G_MAC_ENA_CFG_TX_ENA_SET(1),
+		     devinst,
+		     DEV10G_MAC_ENA_CFG(0));
+
+	/* Take the device out of reset */
+	spx5_inst_rmw(DEV10G_DEV_RST_CTRL_PCS_RX_RST_SET(0) |
+		      DEV10G_DEV_RST_CTRL_PCS_TX_RST_SET(0) |
+		      DEV10G_DEV_RST_CTRL_MAC_RX_RST_SET(0) |
+		      DEV10G_DEV_RST_CTRL_MAC_TX_RST_SET(0) |
+		      DEV10G_DEV_RST_CTRL_SPEED_SEL_SET(clk_spd),
+		      DEV10G_DEV_RST_CTRL_PCS_RX_RST |
+		      DEV10G_DEV_RST_CTRL_PCS_TX_RST |
+		      DEV10G_DEV_RST_CTRL_MAC_RX_RST |
+		      DEV10G_DEV_RST_CTRL_MAC_TX_RST |
+		      DEV10G_DEV_RST_CTRL_SPEED_SEL,
+		      devinst,
+		      DEV10G_DEV_RST_CTRL(0));
+
+	return 0;
+}
+
+/* Switch between 1G/2500 and 5G/10G/25G devices */
+static void sparx5_dev_switch(struct sparx5 *sparx5, int port, bool hsd)
+{
+	int bt_indx = BIT(sparx5_port_dev_index(port));
+
+	if (sparx5_port_is_5g(port)) {
+		spx5_rmw(hsd ? 0 : bt_indx,
+			 bt_indx,
+			 sparx5,
+			 PORT_CONF_DEV5G_MODES);
+	} else if (sparx5_port_is_10g(port)) {
+		spx5_rmw(hsd ? 0 : bt_indx,
+			 bt_indx,
+			 sparx5,
+			 PORT_CONF_DEV10G_MODES);
+	} else if (sparx5_port_is_25g(port)) {
+		spx5_rmw(hsd ? 0 : bt_indx,
+			 bt_indx,
+			 sparx5,
+			 PORT_CONF_DEV25G_MODES);
+	}
+}
+
+/* Configure speed/duplex dependent registers */
+static int sparx5_port_config_low_set(struct sparx5 *sparx5,
+				      struct sparx5_port *port,
+				      struct sparx5_port_config *conf)
+{
+	bool fdx      = conf->duplex == DUPLEX_FULL;
+	int spd       = conf->speed;
+	u32 clk_spd   = spd == SPEED_10 ? 0 : spd == SPEED_100 ? 1 : 2;
+	u32 gig_mode  = spd == SPEED_1000 || spd == SPEED_2500;
+	u32 tx_gap    = spd == SPEED_1000 ? 4 : fdx ? 6 : 5;
+	u32 hdx_gap_1 = spd == SPEED_1000 ? 0 : spd == SPEED_100 ? 1 : 2;
+	u32 hdx_gap_2 = spd == SPEED_1000 ? 0 : spd == SPEED_100 ? 4 : 1;
+
+	/* GIG/FDX mode */
+	spx5_rmw(DEV2G5_MAC_MODE_CFG_GIGA_MODE_ENA_SET(gig_mode) |
+		 DEV2G5_MAC_MODE_CFG_FDX_ENA_SET(fdx),
+		 DEV2G5_MAC_MODE_CFG_GIGA_MODE_ENA |
+		 DEV2G5_MAC_MODE_CFG_FDX_ENA,
+		 sparx5,
+		 DEV2G5_MAC_MODE_CFG(port->portno));
+
+	/* Set MAC IFG Gaps */
+	spx5_wr(DEV2G5_MAC_IFG_CFG_TX_IFG_SET(tx_gap) |
+		DEV2G5_MAC_IFG_CFG_RX_IFG1_SET(hdx_gap_1) |
+		DEV2G5_MAC_IFG_CFG_RX_IFG2_SET(hdx_gap_2),
+		sparx5,
+		DEV2G5_MAC_IFG_CFG(port->portno));
+
+	/* Disabling frame aging when in HDX (due to HDX issue) */
+	spx5_rmw(HSCH_PORT_MODE_AGE_DIS_SET(fdx == 0),
+		 HSCH_PORT_MODE_AGE_DIS,
+		 sparx5,
+		 HSCH_PORT_MODE(port->portno));
+
+	/* Enable MAC module */
+	spx5_wr(DEV2G5_MAC_ENA_CFG_RX_ENA |
+		DEV2G5_MAC_ENA_CFG_TX_ENA,
+		sparx5,
+		DEV2G5_MAC_ENA_CFG(port->portno));
+
+	/* Select speed and take MAC out of reset */
+	spx5_rmw(DEV2G5_DEV_RST_CTRL_SPEED_SEL_SET(clk_spd) |
+		 DEV2G5_DEV_RST_CTRL_MAC_TX_RST_SET(0) |
+		 DEV2G5_DEV_RST_CTRL_MAC_RX_RST_SET(0),
+		 DEV2G5_DEV_RST_CTRL_SPEED_SEL |
+		 DEV2G5_DEV_RST_CTRL_MAC_TX_RST |
+		 DEV2G5_DEV_RST_CTRL_MAC_RX_RST,
+		 sparx5,
+		 DEV2G5_DEV_RST_CTRL(port->portno));
+
+	return 0;
+}
+
+int sparx5_port_pcs_set(struct sparx5 *sparx5,
+			struct sparx5_port *port,
+			struct sparx5_port_config *conf)
+
+{
+	bool high_speed_dev = sparx5_is_high_speed_device(conf);
+	int err;
+
+	if (sparx5_dev_change(sparx5, port, conf)) {
+		/* switch device */
+		sparx5_dev_switch(sparx5, port->portno, high_speed_dev);
+
+		/* Disable the not-in-use device */
+		err = sparx5_port_disable(sparx5, port, !high_speed_dev);
+		if (err)
+			return err;
+	}
+	/* Disable the port before re-configuring */
+	err = sparx5_port_disable(sparx5, port, high_speed_dev);
+	if (err)
+		return -EINVAL;
+
+	if (high_speed_dev)
+		err = sparx5_port_pcs_high_set(sparx5, port, conf);
+	else
+		err = sparx5_port_pcs_low_set(sparx5, port, conf);
+
+	if (err)
+		return -EINVAL;
+
+	if (port->conf.has_sfp) {
+		/* Enable/disable 1G counters in ASM */
+		spx5_rmw(ASM_PORT_CFG_CSC_STAT_DIS_SET(high_speed_dev),
+			 ASM_PORT_CFG_CSC_STAT_DIS,
+			 sparx5,
+			 ASM_PORT_CFG(port->portno));
+
+		/* Enable/disable 1G counters in DSM */
+		spx5_rmw(DSM_BUF_CFG_CSC_STAT_DIS_SET(high_speed_dev),
+			 DSM_BUF_CFG_CSC_STAT_DIS,
+			 sparx5,
+			 DSM_BUF_CFG(port->portno));
+	}
+
+	port->conf = *conf;
+
+	return 0;
+}
+
+int sparx5_port_config(struct sparx5 *sparx5,
+		       struct sparx5_port *port,
+		       struct sparx5_port_config *conf)
+{
+	bool high_speed_dev = sparx5_is_high_speed_device(conf);
+	int err, urgency, stop_wm;
+
+	err = sparx5_port_verify_speed(sparx5, port, conf);
+	if (err)
+		return err;
+
+	/* high speed device is already configured */
+	if (!high_speed_dev)
+		sparx5_port_config_low_set(sparx5, port, conf);
+
+	/* Configure flow control */
+	err = sparx5_port_fc_setup(sparx5, port, conf);
+	if (err)
+		return err;
+
+	/* Set the DSM stop watermark */
+	stop_wm = sparx5_port_fifo_sz(sparx5, port->portno, conf->speed);
+	spx5_rmw(DSM_DEV_TX_STOP_WM_CFG_DEV_TX_STOP_WM_SET(stop_wm),
+		 DSM_DEV_TX_STOP_WM_CFG_DEV_TX_STOP_WM,
+		 sparx5,
+		 DSM_DEV_TX_STOP_WM_CFG(port->portno));
+
+	/* Enable port in queue system */
+	urgency = sparx5_port_fwd_urg(sparx5, conf->speed);
+	spx5_rmw(QFWD_SWITCH_PORT_MODE_PORT_ENA_SET(1) |
+		 QFWD_SWITCH_PORT_MODE_FWD_URGENCY_SET(urgency),
+		 QFWD_SWITCH_PORT_MODE_PORT_ENA |
+		 QFWD_SWITCH_PORT_MODE_FWD_URGENCY,
+		 sparx5,
+		 QFWD_SWITCH_PORT_MODE(port->portno));
+
+	/* Save the new values */
+	port->conf = *conf;
+
+	return 0;
+}
+
+/* Initialize port config to default */
+int sparx5_port_init(struct sparx5 *sparx5,
+		     struct sparx5_port *port,
+		     struct sparx5_port_config *conf)
+{
+	int maxlen = ETH_DATA_LEN + ETH_HLEN + ETH_FCS_LEN;
+	u32 atop = sparx5_wm_enc(20 * (maxlen / SPX5_BUFFER_CELL_SZ));
+	u32 pause_start = sparx5_wm_enc(6  * (maxlen / SPX5_BUFFER_CELL_SZ));
+	u32 devhigh = sparx5_to_high_dev(port->portno);
+	u32 pix = sparx5_port_dev_index(port->portno);
+	void __iomem *devinst = spx5_inst_get(sparx5, devhigh, pix);
+	u32 pcs = sparx5_to_pcs_dev(port->portno);
+	void __iomem *pcsinst = spx5_inst_get(sparx5, pcs, pix);
+	bool sd_pol = port->signd_active_high;
+	bool sd_sel = !port->signd_internal;
+	bool sd_ena = port->signd_enable;
+	u32 pause_stop = 0xFFF - 1; /* FC generate disabled */
+	int err;
+
+	/* Set the mux port mode  */
+	err = sparx5_port_mux_set(sparx5, port, conf);
+	if (err)
+		return err;
+
+	/* Configure MAC vlan awareness */
+	err = sparx5_port_max_tags_set(sparx5, port);
+	if (err)
+		return err;
+
+	/* Set Max Length */
+	spx5_rmw(DEV2G5_MAC_MAXLEN_CFG_MAX_LEN_SET(maxlen),
+		 DEV2G5_MAC_MAXLEN_CFG_MAX_LEN,
+		 sparx5,
+		 DEV2G5_MAC_MAXLEN_CFG(port->portno));
+
+	/* 1G/2G5: Signal Detect configuration */
+	spx5_wr(DEV2G5_PCS1G_SD_CFG_SD_POL_SET(sd_pol) |
+		DEV2G5_PCS1G_SD_CFG_SD_SEL_SET(sd_sel) |
+		DEV2G5_PCS1G_SD_CFG_SD_ENA_SET(sd_ena),
+		sparx5,
+		DEV2G5_PCS1G_SD_CFG(port->portno));
+
+	/* Set Pause WM hysteresis */
+	spx5_rmw(QSYS_PAUSE_CFG_PAUSE_START_SET(pause_start) |
+		 QSYS_PAUSE_CFG_PAUSE_STOP_SET(pause_stop) |
+		 QSYS_PAUSE_CFG_PAUSE_ENA_SET(1),
+		 QSYS_PAUSE_CFG_PAUSE_START |
+		 QSYS_PAUSE_CFG_PAUSE_STOP |
+		 QSYS_PAUSE_CFG_PAUSE_ENA,
+		 sparx5,
+		 QSYS_PAUSE_CFG(port->portno));
+
+	/* Port ATOP. Frames are tail dropped when this WM is hit */
+	spx5_wr(QSYS_ATOP_ATOP_SET(atop),
+		sparx5,
+		QSYS_ATOP(port->portno));
+
+	/* Discard pause frame 01-80-C2-00-00-01 */
+	spx5_wr(PAUSE_DISCARD, sparx5, ANA_CL_CAPTURE_BPDU_CFG(port->portno));
+
+	if (conf->portmode == PHY_INTERFACE_MODE_QSGMII ||
+	    conf->portmode == PHY_INTERFACE_MODE_SGMII) {
+		err = sparx5_serdes_set(sparx5, port, conf);
+		if (err)
+			return err;
+
+		if (!sparx5_port_is_2g5(port->portno))
+			/* Enable shadow device */
+			spx5_rmw(DSM_DEV_TX_STOP_WM_CFG_DEV10G_SHADOW_ENA_SET(1),
+				 DSM_DEV_TX_STOP_WM_CFG_DEV10G_SHADOW_ENA,
+				 sparx5,
+				 DSM_DEV_TX_STOP_WM_CFG(port->portno));
+
+		sparx5_dev_switch(sparx5, port->portno, false);
+	}
+	if (conf->portmode == PHY_INTERFACE_MODE_QSGMII) {
+		// All ports must be PCS enabled in QSGMII mode
+		spx5_rmw(DEV2G5_DEV_RST_CTRL_PCS_TX_RST_SET(0),
+			 DEV2G5_DEV_RST_CTRL_PCS_TX_RST,
+			 sparx5,
+			 DEV2G5_DEV_RST_CTRL(port->portno));
+	}
+	/* Default IFGs for 1G */
+	spx5_wr(DEV2G5_MAC_IFG_CFG_TX_IFG_SET(6) |
+		DEV2G5_MAC_IFG_CFG_RX_IFG1_SET(0) |
+		DEV2G5_MAC_IFG_CFG_RX_IFG2_SET(0),
+		sparx5,
+		DEV2G5_MAC_IFG_CFG(port->portno));
+
+	if (sparx5_port_is_2g5(port->portno))
+		return 0; /* Low speed device only - return */
+
+	/* Now setup the high speed device */
+	if (conf->portmode == PHY_INTERFACE_MODE_NA)
+		conf->portmode = PHY_INTERFACE_MODE_10GBASER;
+
+	if (sparx5_is_high_speed_device(conf))
+		sparx5_dev_switch(sparx5, port->portno, true);
+
+	/* Set Max Length */
+	spx5_inst_rmw(DEV10G_MAC_MAXLEN_CFG_MAX_LEN_SET(maxlen),
+		      DEV10G_MAC_MAXLEN_CFG_MAX_LEN,
+		      devinst,
+		      DEV10G_MAC_ENA_CFG(0));
+
+	/* Handle Signal Detect in 10G PCS */
+	spx5_inst_wr(PCS10G_BR_PCS_SD_CFG_SD_POL_SET(sd_pol) |
+		     PCS10G_BR_PCS_SD_CFG_SD_SEL_SET(sd_sel) |
+		     PCS10G_BR_PCS_SD_CFG_SD_ENA_SET(sd_ena),
+		     pcsinst,
+		     PCS10G_BR_PCS_SD_CFG(0));
+
+	if (sparx5_port_is_25g(port->portno)) {
+		/* Handle Signal Detect in 25G PCS */
+		spx5_wr(DEV25G_PCS25G_SD_CFG_SD_POL_SET(sd_pol) |
+			DEV25G_PCS25G_SD_CFG_SD_SEL_SET(sd_sel) |
+			DEV25G_PCS25G_SD_CFG_SD_ENA_SET(sd_ena),
+			sparx5,
+			DEV25G_PCS25G_SD_CFG(pix));
+	}
+
+	return 0;
+}
+
+void sparx5_port_enable(struct sparx5_port *port, bool enable)
+{
+	struct sparx5 *sparx5 = port->sparx5;
+
+	/* Enable port for frame transfer? */
+	spx5_rmw(QFWD_SWITCH_PORT_MODE_PORT_ENA_SET(enable),
+		 QFWD_SWITCH_PORT_MODE_PORT_ENA,
+		 sparx5,
+		 QFWD_SWITCH_PORT_MODE(port->portno));
+}
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.h b/drivers/net/ethernet/microchip/sparx5/sparx5_port.h
new file mode 100644
index 000000000000..c2d931121ff2
--- /dev/null
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.h
@@ -0,0 +1,98 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Microchip Sparx5 Switch driver
+ *
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#ifndef __SPARX5_PORT_H__
+#define __SPARX5_PORT_H__
+
+#include "sparx5_main.h"
+
+static inline bool sparx5_port_is_2g5(int portno)
+{
+	return portno >= 16 && portno <= 47;
+}
+
+static inline bool sparx5_port_is_5g(int portno)
+{
+	return portno <= 11 || portno == 64;
+}
+
+static inline bool sparx5_port_is_10g(int portno)
+{
+	return (portno >= 12 && portno <= 15) || (portno >= 48 && portno <= 55);
+}
+
+static inline bool sparx5_port_is_25g(int portno)
+{
+	return portno >= 56 && portno <= 63;
+}
+
+static inline u32 sparx5_to_high_dev(int port)
+{
+	if (sparx5_port_is_5g(port))
+		return TARGET_DEV5G;
+	if (sparx5_port_is_10g(port))
+		return TARGET_DEV10G;
+	return TARGET_DEV25G;
+}
+
+static inline u32 sparx5_to_pcs_dev(int port)
+{
+	if (sparx5_port_is_5g(port))
+		return TARGET_PCS5G_BR;
+	if (sparx5_port_is_10g(port))
+		return TARGET_PCS10G_BR;
+	return TARGET_PCS25G_BR;
+}
+
+static inline int sparx5_port_dev_index(int port)
+{
+	if (sparx5_port_is_2g5(port))
+		return port;
+	if (sparx5_port_is_5g(port))
+		return (port <= 11 ? port : 12);
+	if (sparx5_port_is_10g(port))
+		return (port >= 12 && port <= 15) ?
+			port - 12 : port - 44;
+	return (port - 56);
+}
+
+static inline bool sparx5_is_high_speed_device(struct sparx5_port_config *conf)
+{
+	return conf->portmode == PHY_INTERFACE_MODE_10GBASER;
+}
+
+int sparx5_port_init(struct sparx5 *sparx5,
+		     struct sparx5_port *spx5_port,
+		     struct sparx5_port_config *conf);
+
+int sparx5_port_config(struct sparx5 *sparx5,
+		       struct sparx5_port *spx5_port,
+		       struct sparx5_port_config *conf);
+
+int sparx5_port_pcs_set(struct sparx5 *sparx5,
+			struct sparx5_port *port,
+			struct sparx5_port_config *conf);
+
+int sparx5_serdes_set(struct sparx5 *sparx5,
+		      struct sparx5_port *spx5_port,
+		      struct sparx5_port_config *conf);
+
+struct sparx5_port_status {
+	bool link;
+	bool link_down;
+	int  speed;
+	bool an_complete;
+	int  duplex;
+	int  pause;
+};
+
+int sparx5_get_port_status(struct sparx5 *sparx5,
+			   struct sparx5_port *port,
+			   struct sparx5_port_status *status);
+
+void sparx5_port_enable(struct sparx5_port *port, bool enable);
+
+#endif	/* __SPARX5_PORT_H__ */