| Message ID | 1610616132-8220-12-git-send-email-victor.liu@nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add some DRM bridge drivers support for i.MX8qm/qxp SoCs | expand |
On Thu, Jan 14, 2021 at 05:22:09PM +0800, Liu Ying wrote: > This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB). > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > --- > v1->v2: > * Use graph schema. (Laurent) > * Side note i.MX8qxp LDB official name 'pixel mapper'. (Laurent) > > .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 176 +++++++++++++++++++++ > 1 file changed, 176 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > new file mode 100644 > index 00000000..514ac90 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > @@ -0,0 +1,176 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale i.MX8qm/qxp LVDS Display Bridge > + > +maintainers: > + - Liu Ying <victor.liu@nxp.com> > + > +description: | > + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. > + > + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color > + format and can map the input to VESA or JEIDA standards. The two channels > + cannot be used simultaneously, that is to say, the user should pick one of > + them to use. Two LDB channels from two LDB instances can work together in > + LDB split mode to support a dual link LVDS display. The channel indexes > + have to be different. Channel0 outputs odd pixels and channel1 outputs > + even pixels. > + > + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel > + input color format. The two channels can be used simultaneously, either > + in dual mode or split mode. In dual mode, the two channels output identical > + data. In split mode, channel0 outputs odd pixels and channel1 outputs even > + pixels. > + > + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in > + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in > + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming > + consistency, this binding calls it LDB. > + > +properties: > + compatible: > + enum: > + - fsl,imx8qm-ldb > + - fsl,imx8qxp-ldb > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + clocks: > + items: > + - description: pixel clock > + - description: bypass clock > + > + clock-names: > + items: > + - const: pixel > + - const: bypass > + > + power-domains: > + maxItems: 1 > + > + fsl,syscon: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + A phandle which points to Control and Status Registers(CSR) module. Again, seems like this binding should be a child of the syscon. > + > + fsl,companion-ldb: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: | > + A phandle which points to companion LDB which is used in LDB split mode. > + > +patternProperties: > + "^channel@[0-1]$": > + type: object > + description: Represents a channel of LDB. > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + reg: > + description: The channel index. > + enum: [ 0, 1 ] > + > + phys: > + description: A phandle to the phy module representing the LVDS PHY. > + maxItems: 1 > + > + phy-names: > + const: lvds_phy > + > + port@0: > + $ref: /schemas/graph.yaml#/properties/port > + description: Input port of the channel. > + > + port@1: > + $ref: /schemas/graph.yaml#/properties/port > + description: Output port of the channel. > + > + required: > + - "#address-cells" > + - "#size-cells" > + - reg > + - phys > + - phy-names > + > + additionalProperties: false > + > +required: > + - compatible > + - "#address-cells" > + - "#size-cells" > + - clocks > + - clock-names > + - power-domains > + - fsl,syscon > + - channel@0 > + - channel@1 > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: fsl,imx8qm-ldb > + then: > + properties: > + fsl,companion-ldb: false > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/firmware/imx/rsrc.h> > + ldb { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "fsl,imx8qxp-ldb"; > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, > + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; > + clock-names = "pixel", "bypass"; > + power-domains = <&pd IMX_SC_R_LVDS_0>; > + fsl,syscon = <&mipi_lvds_0_csr>; > + > + channel@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + phys = <&mipi_lvds_0_phy>; > + phy-names = "lvds_phy"; > + > + port@0 { > + reg = <0>; > + > + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; > + }; > + }; > + }; > + > + channel@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + phys = <&mipi_lvds_0_phy>; > + phy-names = "lvds_phy"; > + > + port@0 { > + reg = <0>; > + > + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; > + }; > + }; > + }; > + }; > -- > 2.7.4 >
On Mon, 2021-01-25 at 15:19 -0600, Rob Herring wrote: > On Thu, Jan 14, 2021 at 05:22:09PM +0800, Liu Ying wrote: > > This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB). > > > > Signed-off-by: Liu Ying <victor.liu@nxp.com> > > --- > > v1->v2: > > * Use graph schema. (Laurent) > > * Side note i.MX8qxp LDB official name 'pixel mapper'. (Laurent) > > > > .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 176 +++++++++++++++++++++ > > 1 file changed, 176 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > new file mode 100644 > > index 00000000..514ac90 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml > > @@ -0,0 +1,176 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fdisplay%2Fbridge%2Ffsl%2Cimx8qxp-ldb.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7Cd0b03e396918477bc51d08d8c176df8d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637472063608912397%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=utcLOZodmKCEAcBi8vuTHpqiDrRqlia09LpcDDT%2Bm1s%3D&reserved=0 > > +$schema: https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevicetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=04%7C01%7Cvictor.liu%40nxp.com%7Cd0b03e396918477bc51d08d8c176df8d%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637472063608912397%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=aB4XwL7EjuHcIvbPJSUhzyqizpiUA2%2BOenkWmcpIkX0%3D&reserved=0 > > + > > +title: Freescale i.MX8qm/qxp LVDS Display Bridge > > + > > +maintainers: > > + - Liu Ying <victor.liu@nxp.com> > > + > > +description: | > > + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. > > + > > + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color > > + format and can map the input to VESA or JEIDA standards. The two channels > > + cannot be used simultaneously, that is to say, the user should pick one of > > + them to use. Two LDB channels from two LDB instances can work together in > > + LDB split mode to support a dual link LVDS display. The channel indexes > > + have to be different. Channel0 outputs odd pixels and channel1 outputs > > + even pixels. > > + > > + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel > > + input color format. The two channels can be used simultaneously, either > > + in dual mode or split mode. In dual mode, the two channels output identical > > + data. In split mode, channel0 outputs odd pixels and channel1 outputs even > > + pixels. > > + > > + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in > > + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in > > + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming > > + consistency, this binding calls it LDB. > > + > > +properties: > > + compatible: > > + enum: > > + - fsl,imx8qm-ldb > > + - fsl,imx8qxp-ldb > > + > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > + clocks: > > + items: > > + - description: pixel clock > > + - description: bypass clock > > + > > + clock-names: > > + items: > > + - const: pixel > > + - const: bypass > > + > > + power-domains: > > + maxItems: 1 > > + > > + fsl,syscon: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: | > > + A phandle which points to Control and Status Registers(CSR) module. > > Again, seems like this binding should be a child of the syscon. Will do. Thanks, Liu Ying > > > + > > + fsl,companion-ldb: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: | > > + A phandle which points to companion LDB which is used in LDB split mode. > > + > > +patternProperties: > > + "^channel@[0-1]$": > > + type: object > > + description: Represents a channel of LDB. > > + > > + properties: > > + "#address-cells": > > + const: 1 > > + > > + "#size-cells": > > + const: 0 > > + > > + reg: > > + description: The channel index. > > + enum: [ 0, 1 ] > > + > > + phys: > > + description: A phandle to the phy module representing the LVDS PHY. > > + maxItems: 1 > > + > > + phy-names: > > + const: lvds_phy > > + > > + port@0: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: Input port of the channel. > > + > > + port@1: > > + $ref: /schemas/graph.yaml#/properties/port > > + description: Output port of the channel. > > + > > + required: > > + - "#address-cells" > > + - "#size-cells" > > + - reg > > + - phys > > + - phy-names > > + > > + additionalProperties: false > > + > > +required: > > + - compatible > > + - "#address-cells" > > + - "#size-cells" > > + - clocks > > + - clock-names > > + - power-domains > > + - fsl,syscon > > + - channel@0 > > + - channel@1 > > + > > +allOf: > > + - if: > > + properties: > > + compatible: > > + contains: > > + const: fsl,imx8qm-ldb > > + then: > > + properties: > > + fsl,companion-ldb: false > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/firmware/imx/rsrc.h> > > + ldb { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + compatible = "fsl,imx8qxp-ldb"; > > + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, > > + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; > > + clock-names = "pixel", "bypass"; > > + power-domains = <&pd IMX_SC_R_LVDS_0>; > > + fsl,syscon = <&mipi_lvds_0_csr>; > > + > > + channel@0 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <0>; > > + phys = <&mipi_lvds_0_phy>; > > + phy-names = "lvds_phy"; > > + > > + port@0 { > > + reg = <0>; > > + > > + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; > > + }; > > + }; > > + }; > > + > > + channel@1 { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + reg = <1>; > > + phys = <&mipi_lvds_0_phy>; > > + phy-names = "lvds_phy"; > > + > > + port@0 { > > + reg = <0>; > > + > > + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { > > + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; > > + }; > > + }; > > + }; > > + }; > > -- > > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml new file mode 100644 index 00000000..514ac90 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml @@ -0,0 +1,176 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-ldb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qm/qxp LVDS Display Bridge + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +description: | + The Freescale i.MX8qm/qxp LVDS Display Bridge(LDB) has two channels. + + For i.MX8qxp LDB, each channel supports up to 24bpp parallel input color + format and can map the input to VESA or JEIDA standards. The two channels + cannot be used simultaneously, that is to say, the user should pick one of + them to use. Two LDB channels from two LDB instances can work together in + LDB split mode to support a dual link LVDS display. The channel indexes + have to be different. Channel0 outputs odd pixels and channel1 outputs + even pixels. + + For i.MX8qm LDB, each channel additionally supports up to 30bpp parallel + input color format. The two channels can be used simultaneously, either + in dual mode or split mode. In dual mode, the two channels output identical + data. In split mode, channel0 outputs odd pixels and channel1 outputs even + pixels. + + A side note is that i.MX8qm/qxp LDB is officially called pixel mapper in + the SoC reference manuals. The pixel mapper uses logic of LDBs embedded in + i.MX6qdl/sx SoCs, i.e., it is essentially based on them. To keep the naming + consistency, this binding calls it LDB. + +properties: + compatible: + enum: + - fsl,imx8qm-ldb + - fsl,imx8qxp-ldb + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + items: + - description: pixel clock + - description: bypass clock + + clock-names: + items: + - const: pixel + - const: bypass + + power-domains: + maxItems: 1 + + fsl,syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to Control and Status Registers(CSR) module. + + fsl,companion-ldb: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion LDB which is used in LDB split mode. + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of LDB. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + description: The channel index. + enum: [ 0, 1 ] + + phys: + description: A phandle to the phy module representing the LVDS PHY. + maxItems: 1 + + phy-names: + const: lvds_phy + + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input port of the channel. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output port of the channel. + + required: + - "#address-cells" + - "#size-cells" + - reg + - phys + - phy-names + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - clocks + - clock-names + - power-domains + - fsl,syscon + - channel@0 + - channel@1 + +allOf: + - if: + properties: + compatible: + contains: + const: fsl,imx8qm-ldb + then: + properties: + fsl,companion-ldb: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + ldb { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx8qxp-ldb"; + clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, + <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; + clock-names = "pixel", "bypass"; + power-domains = <&pd IMX_SC_R_LVDS_0>; + fsl,syscon = <&mipi_lvds_0_csr>; + + channel@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; + }; + }; + }; + + channel@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + phys = <&mipi_lvds_0_phy>; + phy-names = "lvds_phy"; + + port@0 { + reg = <0>; + + mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { + remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; + }; + }; + }; + };
This patch adds bindings for i.MX8qm/qxp LVDS display bridge(LDB). Signed-off-by: Liu Ying <victor.liu@nxp.com> --- v1->v2: * Use graph schema. (Laurent) * Side note i.MX8qxp LDB official name 'pixel mapper'. (Laurent) .../bindings/display/bridge/fsl,imx8qxp-ldb.yaml | 176 +++++++++++++++++++++ 1 file changed, 176 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml