diff mbox series

cpufreq: qcom-hw: enable boost support

Message ID 20210113065241.23829-1-shawn.guo@linaro.org
State Accepted
Commit 266991721c15f9feb5c4b839cb1bdde4a2b20030
Headers show
Series cpufreq: qcom-hw: enable boost support | expand

Commit Message

Shawn Guo Jan. 13, 2021, 6:52 a.m. UTC
At least on sdm850, the 2956800 khz is detected as a boost frequency in
function qcom_cpufreq_hw_read_lut().  Let's enable boost support by
calling cpufreq_enable_boost_support(), so that we can get the boost
frequency by switching it on via 'boost' sysfs entry like below.

 $ echo 1 > /sys/devices/system/cpu/cpufreq/boost

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/cpufreq/qcom-cpufreq-hw.c | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Steev Klimaszewski Jan. 14, 2021, 3:33 p.m. UTC | #1
On 1/13/21 12:52 AM, Shawn Guo wrote:
> At least on sdm850, the 2956800 khz is detected as a boost frequency in

> function qcom_cpufreq_hw_read_lut().  Let's enable boost support by

> calling cpufreq_enable_boost_support(), so that we can get the boost

> frequency by switching it on via 'boost' sysfs entry like below.

>

>  $ echo 1 > /sys/devices/system/cpu/cpufreq/boost

>

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> ---

>  drivers/cpufreq/qcom-cpufreq-hw.c | 6 ++++++

>  1 file changed, 6 insertions(+)

>

> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c

> index 315ee987d2d3..6eb88463a24e 100644

> --- a/drivers/cpufreq/qcom-cpufreq-hw.c

> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c

> @@ -351,6 +351,12 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)

>  

>  	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);

>  

> +	if (policy_has_boost_freq(policy)) {

> +		ret = cpufreq_enable_boost_support();

> +		if (ret)

> +			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);

> +	}

> +

>  	return 0;

>  error:

>  	devm_iounmap(dev, base);

Tested-by: Steev Klimaszewski <steev@kali.org>
Bjorn Andersson Jan. 14, 2021, 4:18 p.m. UTC | #2
On Wed 13 Jan 00:52 CST 2021, Shawn Guo wrote:

> At least on sdm850, the 2956800 khz is detected as a boost frequency in
> function qcom_cpufreq_hw_read_lut().  Let's enable boost support by
> calling cpufreq_enable_boost_support(), so that we can get the boost
> frequency by switching it on via 'boost' sysfs entry like below.
> 
>  $ echo 1 > /sys/devices/system/cpu/cpufreq/boost
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/cpufreq/qcom-cpufreq-hw.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
> index 315ee987d2d3..6eb88463a24e 100644
> --- a/drivers/cpufreq/qcom-cpufreq-hw.c
> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c
> @@ -351,6 +351,12 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
>  
>  	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
>  
> +	if (policy_has_boost_freq(policy)) {
> +		ret = cpufreq_enable_boost_support();
> +		if (ret)
> +			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
> +	}
> +
>  	return 0;
>  error:
>  	devm_iounmap(dev, base);
> -- 
> 2.17.1
>
Viresh Kumar Jan. 18, 2021, 6:44 a.m. UTC | #3
On 13-01-21, 14:52, Shawn Guo wrote:
> At least on sdm850, the 2956800 khz is detected as a boost frequency in

> function qcom_cpufreq_hw_read_lut().  Let's enable boost support by

> calling cpufreq_enable_boost_support(), so that we can get the boost

> frequency by switching it on via 'boost' sysfs entry like below.

> 

>  $ echo 1 > /sys/devices/system/cpu/cpufreq/boost

> 

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> ---

>  drivers/cpufreq/qcom-cpufreq-hw.c | 6 ++++++

>  1 file changed, 6 insertions(+)

> 

> diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c

> index 315ee987d2d3..6eb88463a24e 100644

> --- a/drivers/cpufreq/qcom-cpufreq-hw.c

> +++ b/drivers/cpufreq/qcom-cpufreq-hw.c

> @@ -351,6 +351,12 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)

>  

>  	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);

>  

> +	if (policy_has_boost_freq(policy)) {

> +		ret = cpufreq_enable_boost_support();

> +		if (ret)

> +			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);

> +	}

> +

>  	return 0;

>  error:

>  	devm_iounmap(dev, base);


Applied. Thanks.

-- 
viresh
patchwork-bot+linux-arm-msm@kernel.org March 1, 2021, 7:59 p.m. UTC | #4
Hello:

This patch was applied to qcom/linux.git (refs/heads/for-next):

On Wed, 13 Jan 2021 14:52:41 +0800 you wrote:
> At least on sdm850, the 2956800 khz is detected as a boost frequency in

> function qcom_cpufreq_hw_read_lut().  Let's enable boost support by

> calling cpufreq_enable_boost_support(), so that we can get the boost

> frequency by switching it on via 'boost' sysfs entry like below.

> 

>  $ echo 1 > /sys/devices/system/cpu/cpufreq/boost

> 

> [...]


Here is the summary with links:
  - cpufreq: qcom-hw: enable boost support
    https://git.kernel.org/qcom/c/266991721c15

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
Shawn Guo March 2, 2021, 2:04 a.m. UTC | #5
On Mon, Mar 01, 2021 at 07:59:42PM +0000, patchwork-bot+linux-arm-msm@kernel.org wrote:
> Hello:

> 

> This patch was applied to qcom/linux.git (refs/heads/for-next):

> 

> On Wed, 13 Jan 2021 14:52:41 +0800 you wrote:

> > At least on sdm850, the 2956800 khz is detected as a boost frequency in

> > function qcom_cpufreq_hw_read_lut().  Let's enable boost support by

> > calling cpufreq_enable_boost_support(), so that we can get the boost

> > frequency by switching it on via 'boost' sysfs entry like below.

> > 

> >  $ echo 1 > /sys/devices/system/cpu/cpufreq/boost

> > 

> > [...]

> 

> Here is the summary with links:

>   - cpufreq: qcom-hw: enable boost support

>     https://git.kernel.org/qcom/c/266991721c15

> 

> You are awesome, thank you!

> --

> Deet-doot-dot, I am a bot.

> https://korg.docs.kernel.org/patchwork/pwbot.html


Bjorn,

Why do I keep receiving such bot message on patches that had already
landed mainline?

Shawn
diff mbox series

Patch

diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 315ee987d2d3..6eb88463a24e 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -351,6 +351,12 @@  static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 
 	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
 
+	if (policy_has_boost_freq(policy)) {
+		ret = cpufreq_enable_boost_support();
+		if (ret)
+			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
+	}
+
 	return 0;
 error:
 	devm_iounmap(dev, base);