@@ -12,6 +12,7 @@
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
@@ -62,6 +63,9 @@
#define OWL_UART_STAT_TRFL_MASK GENMASK(16, 11)
#define OWL_UART_STAT_UTBB BIT(17)
+#define OWL_UART_POLL_USEC 5
+#define OWL_UART_TIMEOUT_USEC 10000
+
static struct uart_driver owl_uart_driver;
struct owl_uart_info {
@@ -461,6 +465,36 @@ static void owl_uart_config_port(struct uart_port *port, int flags)
}
}
+#ifdef CONFIG_CONSOLE_POLL
+
+static int owl_uart_poll_get_char(struct uart_port *port)
+{
+ if (owl_uart_read(port, OWL_UART_STAT) & OWL_UART_STAT_RFEM)
+ return NO_POLL_CHAR;
+
+ return owl_uart_read(port, OWL_UART_RXDAT);
+}
+
+static void owl_uart_poll_put_char(struct uart_port *port, unsigned char ch)
+{
+ u32 reg;
+ int ret;
+
+ /* Wait while FIFO is full or timeout */
+ ret = readl_poll_timeout_atomic(port->membase + OWL_UART_STAT, reg,
+ !(reg & OWL_UART_STAT_TFFU),
+ OWL_UART_POLL_USEC,
+ OWL_UART_TIMEOUT_USEC);
+ if (ret == -ETIMEDOUT) {
+ dev_err(port->dev, "Timeout waiting while UART TX FULL\n");
+ return;
+ }
+
+ owl_uart_write(port, ch, OWL_UART_TXDAT);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
static const struct uart_ops owl_uart_ops = {
.set_mctrl = owl_uart_set_mctrl,
.get_mctrl = owl_uart_get_mctrl,
@@ -476,6 +510,10 @@ static const struct uart_ops owl_uart_ops = {
.request_port = owl_uart_request_port,
.release_port = owl_uart_release_port,
.verify_port = owl_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = owl_uart_poll_get_char,
+ .poll_put_char = owl_uart_poll_put_char,
+#endif
};
#ifdef CONFIG_SERIAL_OWL_CONSOLE
Implement 'poll_put_char' and 'poll_get_char' callbacks in struct 'owl_uart_ops' that enables OWL UART to be used for kernel debugging over serial line. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> --- Changes in v3: - Used 'readl_poll_timeout_atomic()' in 'owl_uart_poll_put_char()' to get rid of 'cpu_relax()' and provide a max bound to the loop, as indicated by Greg and Jiri Changes in v2: - Reverted unnecessary changes per Andreas feedback - Optimized implementation for 'owl_uart_poll_get_char()' and 'owl_uart_poll_put_char()' callbacks drivers/tty/serial/owl-uart.c | 38 +++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)