| Message ID | 20210111154524.20196-3-nicola.mazzucato@arm.com |
|---|---|
| State | New |
| Headers | show |
| Series | CPUFreq: Add support for opp-sharing cpus | expand |
On 11-01-21, 15:45, Nicola Mazzucato wrote: > diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c > +static int scmi_init_cpudata(void) > +{ > + int cpu; > + unsigned int ncpus = num_possible_cpus(); > + > + cpudata_table = kzalloc(sizeof(*cpudata_table) * ncpus, GFP_KERNEL); > + if (!cpudata_table) > + return -ENOMEM; This could have been done with a per-cpu variable instead. > + for_each_possible_cpu(cpu) { > + if (!zalloc_cpumask_var(&cpudata_table[cpu].scmi_shared_cpus, > + GFP_KERNEL)) > + goto out; > + } You are making a copy of the struct for each CPU and so for a 16 CPUs sharing their clock lines, you will have 16 copies of the exact same stuff. An optimal approach would be to have a linked-list of this structure and that will only have 1 node per cpufreq policy. > + return 0; > + > +out: > + kfree(cpudata_table); > + return -ENOMEM; > +} > + > +static int scmi_init_device(const struct scmi_handle *handle, int cpu) > +{ > + struct device *cpu_dev; > + int ret, nr_opp; > + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); > + bool power_scale_mw; > + cpumask_var_t scmi_cpus; > + > + if (!zalloc_cpumask_var(&scmi_cpus, GFP_KERNEL)) > + return -ENOMEM; > + > + cpumask_set_cpu(cpu, scmi_cpus); > + > + cpu_dev = get_cpu_device(cpu); > + > + ret = scmi_get_sharing_cpus(cpu_dev, scmi_cpus); Where do you expect the sharing information to come from in this case ? DT ? > + if (ret) { > + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); > + goto free_cpumask; > + } > + > + /* > + * We get here for each CPU. Add OPPs only on those CPUs for which we > + * haven't already done so, or set their OPPs as shared. > + */ > + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); > + if (nr_opp <= 0) { > + ret = handle->perf_ops->device_opps_add(handle, cpu_dev); > + if (ret) { > + dev_warn(cpu_dev, "failed to add opps to the device\n"); > + goto free_cpumask; > + } > + > + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, scmi_cpus); > + if (ret) { > + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", > + __func__, ret); > + goto free_cpumask; > + } > + > + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); Shouldn't you do this just after adding the OPPs ? > + if (nr_opp <= 0) { > + dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", > + __func__, ret); > + > + ret = -ENODEV; > + goto free_cpumask; > + } > + > + power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); > + em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, scmi_cpus, > + power_scale_mw); > + } > + > + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, > + &cpudata_table[cpu].freq_table); > + if (ret) { > + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); > + goto free_cpumask; > + } > + > + cpumask_copy(cpudata_table[cpu].scmi_shared_cpus, scmi_cpus); > + > +free_cpumask: > + free_cpumask_var(scmi_cpus); > + return ret; > +} > + > static int scmi_cpufreq_probe(struct scmi_device *sdev) > { > int ret; > struct device *dev = &sdev->dev; > + int cpu; > + struct device *cpu_dev; Please keep the list of local variable in decreasing order of their length, many people including me prefer it that way. > > handle = sdev->handle; > > @@ -247,6 +305,24 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) > devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); > #endif > > + ret = scmi_init_cpudata(); > + if (ret) { > + pr_err("%s: init cpu data failed\n", __func__); > + return ret; > + } > + > + for_each_possible_cpu(cpu) { > + cpu_dev = get_cpu_device(cpu); > + > + ret = scmi_init_device(handle, cpu); > + if (ret) { > + dev_err(cpu_dev, "%s: init device failed\n", > + __func__); > + > + return ret; You missed undoing scmi_init_cpudata(). > + } > + } > + > ret = cpufreq_register_driver(&scmi_cpufreq_driver); > if (ret) { > dev_err(dev, "%s: registering cpufreq failed, err: %d\n", > @@ -258,6 +334,20 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) > > static void scmi_cpufreq_remove(struct scmi_device *sdev) > { > + int cpu; > + struct device *cpu_dev; > + > + for_each_possible_cpu(cpu) { > + cpu_dev = get_cpu_device(cpu); > + > + dev_pm_opp_free_cpufreq_table(cpu_dev, > + &cpudata_table[cpu].freq_table); > + > + free_cpumask_var(cpudata_table[cpu].scmi_shared_cpus); > + } > + > + kfree(cpudata_table); > + > cpufreq_unregister_driver(&scmi_cpufreq_driver); > } > > -- > 2.27.0
Hi Viresh, thanks for looking into this. Please see below. On 1/12/21 11:17 AM, Viresh Kumar wrote: > On 11-01-21, 15:45, Nicola Mazzucato wrote: >> diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c >> +static int scmi_init_cpudata(void) >> +{ >> + int cpu; >> + unsigned int ncpus = num_possible_cpus(); >> + >> + cpudata_table = kzalloc(sizeof(*cpudata_table) * ncpus, GFP_KERNEL); >> + if (!cpudata_table) >> + return -ENOMEM; > > This could have been done with a per-cpu variable instead. sure, I can do a DEFINE_PER_CPU() for it if it makes it better. > >> + for_each_possible_cpu(cpu) { >> + if (!zalloc_cpumask_var(&cpudata_table[cpu].scmi_shared_cpus, >> + GFP_KERNEL)) >> + goto out; >> + } > > You are making a copy of the struct for each CPU and so for a 16 CPUs > sharing their clock lines, you will have 16 copies of the exact same > stuff. > > An optimal approach would be to have a linked-list of this structure > and that will only have 1 node per cpufreq policy. It is allocating space for the cpumask for each of the cpu. No data is copied yet. I understand the optimisation, but I don't see a linkage to cpufreq policy to be a good idea. This cpudata is for internal storage of scmi and opp-shared info and it is not tied to cpufreq policy. We have moved all the cpu bits to probe and at this stage we have no knowledge of cpufreq polices. Or what am I missing? > >> + return 0; >> + >> +out: >> + kfree(cpudata_table); >> + return -ENOMEM; >> +} >> + >> +static int scmi_init_device(const struct scmi_handle *handle, int cpu) >> +{ >> + struct device *cpu_dev; >> + int ret, nr_opp; >> + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); >> + bool power_scale_mw; >> + cpumask_var_t scmi_cpus; >> + >> + if (!zalloc_cpumask_var(&scmi_cpus, GFP_KERNEL)) >> + return -ENOMEM; >> + >> + cpumask_set_cpu(cpu, scmi_cpus); >> + >> + cpu_dev = get_cpu_device(cpu); >> + >> + ret = scmi_get_sharing_cpus(cpu_dev, scmi_cpus); > > Where do you expect the sharing information to come from in this case > ? DT ? Coming from SCMI perf. The source of info has not changed. > >> + if (ret) { >> + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); >> + goto free_cpumask; >> + } >> + >> + /* >> + * We get here for each CPU. Add OPPs only on those CPUs for which we >> + * haven't already done so, or set their OPPs as shared. >> + */ >> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); >> + if (nr_opp <= 0) { >> + ret = handle->perf_ops->device_opps_add(handle, cpu_dev); >> + if (ret) { >> + dev_warn(cpu_dev, "failed to add opps to the device\n"); >> + goto free_cpumask; >> + } >> + >> + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, scmi_cpus); >> + if (ret) { >> + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", >> + __func__, ret); >> + goto free_cpumask; >> + } >> + >> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); > > Shouldn't you do this just after adding the OPPs ? This was suggested earlier. It was moved closer to em_registration to where the nr_opp is used. One way or the other as I don't have a strong preference for its place. > >> + if (nr_opp <= 0) { >> + dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", >> + __func__, ret); >> + >> + ret = -ENODEV; >> + goto free_cpumask; >> + } >> + >> + power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); >> + em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, scmi_cpus, >> + power_scale_mw); >> + } >> + >> + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, >> + &cpudata_table[cpu].freq_table); >> + if (ret) { >> + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); >> + goto free_cpumask; >> + } >> + >> + cpumask_copy(cpudata_table[cpu].scmi_shared_cpus, scmi_cpus); >> + >> +free_cpumask: >> + free_cpumask_var(scmi_cpus); >> + return ret; >> +} >> + >> static int scmi_cpufreq_probe(struct scmi_device *sdev) >> { >> int ret; >> struct device *dev = &sdev->dev; >> + int cpu; >> + struct device *cpu_dev; > > Please keep the list of local variable in decreasing order of their > length, many people including me prefer it that way. Apologies, it will get fixed. > >> >> handle = sdev->handle; >> >> @@ -247,6 +305,24 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) >> devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); >> #endif >> >> + ret = scmi_init_cpudata(); >> + if (ret) { >> + pr_err("%s: init cpu data failed\n", __func__); >> + return ret; >> + } >> + >> + for_each_possible_cpu(cpu) { >> + cpu_dev = get_cpu_device(cpu); >> + >> + ret = scmi_init_device(handle, cpu); >> + if (ret) { >> + dev_err(cpu_dev, "%s: init device failed\n", >> + __func__); >> + >> + return ret; > > You missed undoing scmi_init_cpudata(). Thanks for spotting. I will fix it. > >> + } >> + } >> + >> ret = cpufreq_register_driver(&scmi_cpufreq_driver); >> if (ret) { >> dev_err(dev, "%s: registering cpufreq failed, err: %d\n", >> @@ -258,6 +334,20 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) >> >> static void scmi_cpufreq_remove(struct scmi_device *sdev) >> { >> + int cpu; >> + struct device *cpu_dev; >> + >> + for_each_possible_cpu(cpu) { >> + cpu_dev = get_cpu_device(cpu); >> + >> + dev_pm_opp_free_cpufreq_table(cpu_dev, >> + &cpudata_table[cpu].freq_table); >> + >> + free_cpumask_var(cpudata_table[cpu].scmi_shared_cpus); >> + } >> + >> + kfree(cpudata_table); >> + >> cpufreq_unregister_driver(&scmi_cpufreq_driver); >> } >> >> -- >> 2.27.0 > Many thanks, Nicola
On 13-01-21, 11:55, Nicola Mazzucato wrote: > On 1/12/21 11:17 AM, Viresh Kumar wrote: > > This could have been done with a per-cpu variable instead. > > sure, I can do a DEFINE_PER_CPU() for it if it makes it better. If we don't go with the linked list approach, then yes. > >> + for_each_possible_cpu(cpu) { > >> + if (!zalloc_cpumask_var(&cpudata_table[cpu].scmi_shared_cpus, > >> + GFP_KERNEL)) > >> + goto out; > >> + } > > > > You are making a copy of the struct for each CPU and so for a 16 CPUs > > sharing their clock lines, you will have 16 copies of the exact same > > stuff. > > > > An optimal approach would be to have a linked-list of this structure > > and that will only have 1 node per cpufreq policy. > > It is allocating space for the cpumask for each of the cpu. No data is copied yet. Yes, I was talking about the whole design here. > I understand the optimisation, but I don't see a linkage to cpufreq policy to be > a good idea. This cpudata is for internal storage of scmi and opp-shared info > and it is not tied to cpufreq policy. Well, it is going to be the same information for all CPUs of a policy, isn't it ? > We have moved all the cpu bits to probe > and at this stage we have no knowledge of cpufreq polices. Yes, but you are reading that information from scmi or DT (empty opp tables) and so you know what the cpumasks are going to be set to. The linked list is the right solution in my opinion, it is much more optimal. > >> +static int scmi_init_device(const struct scmi_handle *handle, int cpu) > >> +{ > >> + struct device *cpu_dev; > >> + int ret, nr_opp; > >> + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); > >> + bool power_scale_mw; > >> + cpumask_var_t scmi_cpus; > >> + > >> + if (!zalloc_cpumask_var(&scmi_cpus, GFP_KERNEL)) > >> + return -ENOMEM; > >> + > >> + cpumask_set_cpu(cpu, scmi_cpus); > >> + > >> + cpu_dev = get_cpu_device(cpu); > >> + > >> + ret = scmi_get_sharing_cpus(cpu_dev, scmi_cpus); > > > > Where do you expect the sharing information to come from in this case > > ? DT ? > > Coming from SCMI perf. The source of info has not changed. > > > > >> + if (ret) { > >> + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); > >> + goto free_cpumask; > >> + } > >> + > >> + /* > >> + * We get here for each CPU. Add OPPs only on those CPUs for which we > >> + * haven't already done so, or set their OPPs as shared. > >> + */ > >> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); > >> + if (nr_opp <= 0) { > >> + ret = handle->perf_ops->device_opps_add(handle, cpu_dev); > >> + if (ret) { > >> + dev_warn(cpu_dev, "failed to add opps to the device\n"); > >> + goto free_cpumask; > >> + } > >> + > >> + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, scmi_cpus); > >> + if (ret) { > >> + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", > >> + __func__, ret); > >> + goto free_cpumask; > >> + } > >> + > >> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); > > > > Shouldn't you do this just after adding the OPPs ? > > This was suggested earlier. It was moved closer to em_registration to where the > nr_opp is used. One way or the other as I don't have a strong preference for its > place. It is better to move it above as this will shorten the error path. -- viresh
Hi Viresh, many thanks for your suggestions. I will prepare a new version based on those. Many thanks, Nicola On 1/14/21 5:07 AM, Viresh Kumar wrote: > On 13-01-21, 11:55, Nicola Mazzucato wrote: >> On 1/12/21 11:17 AM, Viresh Kumar wrote: >>> This could have been done with a per-cpu variable instead. >> >> sure, I can do a DEFINE_PER_CPU() for it if it makes it better. > > If we don't go with the linked list approach, then yes. > >>>> + for_each_possible_cpu(cpu) { >>>> + if (!zalloc_cpumask_var(&cpudata_table[cpu].scmi_shared_cpus, >>>> + GFP_KERNEL)) >>>> + goto out; >>>> + } >>> >>> You are making a copy of the struct for each CPU and so for a 16 CPUs >>> sharing their clock lines, you will have 16 copies of the exact same >>> stuff. >>> >>> An optimal approach would be to have a linked-list of this structure >>> and that will only have 1 node per cpufreq policy. >> >> It is allocating space for the cpumask for each of the cpu. No data is copied yet. > > Yes, I was talking about the whole design here. > >> I understand the optimisation, but I don't see a linkage to cpufreq policy to be >> a good idea. This cpudata is for internal storage of scmi and opp-shared info >> and it is not tied to cpufreq policy. > > Well, it is going to be the same information for all CPUs of a policy, isn't it > ? > >> We have moved all the cpu bits to probe >> and at this stage we have no knowledge of cpufreq polices. > > Yes, but you are reading that information from scmi or DT (empty opp tables) and > so you know what the cpumasks are going to be set to. The linked list is the > right solution in my opinion, it is much more optimal. > >>>> +static int scmi_init_device(const struct scmi_handle *handle, int cpu) >>>> +{ >>>> + struct device *cpu_dev; >>>> + int ret, nr_opp; >>>> + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); >>>> + bool power_scale_mw; >>>> + cpumask_var_t scmi_cpus; >>>> + >>>> + if (!zalloc_cpumask_var(&scmi_cpus, GFP_KERNEL)) >>>> + return -ENOMEM; >>>> + >>>> + cpumask_set_cpu(cpu, scmi_cpus); >>>> + >>>> + cpu_dev = get_cpu_device(cpu); >>>> + >>>> + ret = scmi_get_sharing_cpus(cpu_dev, scmi_cpus); >>> >>> Where do you expect the sharing information to come from in this case >>> ? DT ? >> >> Coming from SCMI perf. The source of info has not changed. >> >>> >>>> + if (ret) { >>>> + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); >>>> + goto free_cpumask; >>>> + } >>>> + >>>> + /* >>>> + * We get here for each CPU. Add OPPs only on those CPUs for which we >>>> + * haven't already done so, or set their OPPs as shared. >>>> + */ >>>> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); >>>> + if (nr_opp <= 0) { >>>> + ret = handle->perf_ops->device_opps_add(handle, cpu_dev); >>>> + if (ret) { >>>> + dev_warn(cpu_dev, "failed to add opps to the device\n"); >>>> + goto free_cpumask; >>>> + } >>>> + >>>> + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, scmi_cpus); >>>> + if (ret) { >>>> + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", >>>> + __func__, ret); >>>> + goto free_cpumask; >>>> + } >>>> + >>>> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); >>> >>> Shouldn't you do this just after adding the OPPs ? >> >> This was suggested earlier. It was moved closer to em_registration to where the >> nr_opp is used. One way or the other as I don't have a strong preference for its >> place. > > It is better to move it above as this will shorten the error path. >
Hi Nicola, a few remarks down below. On Mon, Jan 11, 2021 at 03:45:22PM +0000, Nicola Mazzucato wrote: > Some of the cpu related initialisation can be done at probe stage. > This patch moves those initialisations from the ->init callback to the > probe stage. > > This is done in preparation for adding support to retrieve additional > information from DT (CPUs sharing v/f lines). > > Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> > --- > drivers/cpufreq/scmi-cpufreq.c | 180 ++++++++++++++++++++++++--------- > 1 file changed, 135 insertions(+), 45 deletions(-) > > diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c > index 15b213ed78fa..4aa97cdc5997 100644 > --- a/drivers/cpufreq/scmi-cpufreq.c > +++ b/drivers/cpufreq/scmi-cpufreq.c > @@ -25,6 +25,14 @@ struct scmi_data { > struct device *cpu_dev; > }; > > +/* Per-CPU storage for runtime management */ > +struct scmi_cpudata { > + cpumask_var_t scmi_shared_cpus; > + struct cpufreq_frequency_table *freq_table; > +}; > + > +static struct scmi_cpudata *cpudata_table; > + > static const struct scmi_handle *handle; > > static unsigned int scmi_cpufreq_get_rate(unsigned int cpu) > @@ -120,13 +128,10 @@ scmi_get_cpu_power(unsigned long *power, unsigned long *KHz, > > static int scmi_cpufreq_init(struct cpufreq_policy *policy) > { > - int ret, nr_opp; > + int ret; > unsigned int latency; > struct device *cpu_dev; > struct scmi_data *priv; > - struct cpufreq_frequency_table *freq_table; > - struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); > - bool power_scale_mw; > > cpu_dev = get_cpu_device(policy->cpu); > if (!cpu_dev) { > @@ -134,42 +139,19 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) > return -ENODEV; > } > > - ret = handle->perf_ops->device_opps_add(handle, cpu_dev); > - if (ret) { > - dev_warn(cpu_dev, "failed to add opps to the device\n"); > - return ret; > - } > - > - ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus); > - if (ret) { > - dev_warn(cpu_dev, "failed to get sharing cpumask\n"); > - return ret; > - } > - > - ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); > - if (ret) { > - dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", > - __func__, ret); > - return ret; > - } > - > priv = kzalloc(sizeof(*priv), GFP_KERNEL); > if (!priv) { > ret = -ENOMEM; > goto out_free_opp; > } > > - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); > - if (ret) { > - dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); > - goto out_free_priv; > - } > + cpumask_copy(policy->cpus, cpudata_table[policy->cpu].scmi_shared_cpus); > > priv->cpu_dev = cpu_dev; > priv->domain_id = handle->perf_ops->device_domain_id(cpu_dev); > > policy->driver_data = priv; > - policy->freq_table = freq_table; > + policy->freq_table = cpudata_table[policy->cpu].freq_table; > > /* SCMI allows DVFS request for any domain from any CPU */ > policy->dvfs_possible_from_any_cpu = true; > @@ -183,23 +165,8 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) > policy->fast_switch_possible = > handle->perf_ops->fast_switch_possible(handle, cpu_dev); > > - nr_opp = dev_pm_opp_get_opp_count(cpu_dev); > - if (nr_opp <= 0) { > - dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", > - __func__, ret); > - > - ret = -ENODEV; > - goto out_free_priv; > - } > - > - power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); > - em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus, > - power_scale_mw); > - > return 0; > > -out_free_priv: > - kfree(priv); > out_free_opp: > dev_pm_opp_remove_all_dynamic(cpu_dev); > My understanding (but I could be wrong given my limited familiarity with CPUFREQ ... so bear with me) is that dev_pm_opp_remove_all_dynamic() is meant to clean dynamic OPPs added by dev_pm_opp_add() which in turn in this driver is folded inside the handle->perf_ops->device_opps_add() call, so is not that this call should be added also on the error path inside the new scmi_init_device() ? (this was already faulty this way in the original code to be honest...if faulty at all :D) I added a few such invocations down below as rough untested example of what I mean. > @@ -210,7 +177,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy) > { > struct scmi_data *priv = policy->driver_data; > > - dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); > dev_pm_opp_remove_all_dynamic(priv->cpu_dev); > kfree(priv); > > @@ -231,10 +197,102 @@ static struct cpufreq_driver scmi_cpufreq_driver = { > .exit = scmi_cpufreq_exit, > }; > > +static int scmi_init_cpudata(void) > +{ > + int cpu; > + unsigned int ncpus = num_possible_cpus(); > + > + cpudata_table = kzalloc(sizeof(*cpudata_table) * ncpus, GFP_KERNEL); Shouldn/t this be a kcalloc() given it's an array allocation, checkpatch complains too. > + if (!cpudata_table) > + return -ENOMEM; > + > + for_each_possible_cpu(cpu) { > + if (!zalloc_cpumask_var(&cpudata_table[cpu].scmi_shared_cpus, > + GFP_KERNEL)) > + goto out; > + } > + > + return 0; > + > +out: > + kfree(cpudata_table); > + return -ENOMEM; > +} > + > +static int scmi_init_device(const struct scmi_handle *handle, int cpu) > +{ > + struct device *cpu_dev; > + int ret, nr_opp; > + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); > + bool power_scale_mw; > + cpumask_var_t scmi_cpus; > + > + if (!zalloc_cpumask_var(&scmi_cpus, GFP_KERNEL)) > + return -ENOMEM; > + > + cpumask_set_cpu(cpu, scmi_cpus); > + > + cpu_dev = get_cpu_device(cpu); > + > + ret = scmi_get_sharing_cpus(cpu_dev, scmi_cpus); > + if (ret) { > + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); > + goto free_cpumask; > + } > + > + /* > + * We get here for each CPU. Add OPPs only on those CPUs for which we > + * haven't already done so, or set their OPPs as shared. > + */ > + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); > + if (nr_opp <= 0) { > + ret = handle->perf_ops->device_opps_add(handle, cpu_dev); > + if (ret) { > + dev_warn(cpu_dev, "failed to add opps to the device\n"); > + goto free_cpumask; > + } > + > + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, scmi_cpus); > + if (ret) { > + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", > + __func__, ret); goto free_dynamic_opps; > + } > + > + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); > + if (nr_opp <= 0) { > + dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", > + __func__, ret); > + > + ret = -ENODEV; goto free_dynamic_opps; > + } > + > + power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); > + em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, scmi_cpus, > + power_scale_mw); > + } > + > + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, > + &cpudata_table[cpu].freq_table); > + if (ret) { > + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); goto free_dynamic_opps; > + } > + > + cpumask_copy(cpudata_table[cpu].scmi_shared_cpus, scmi_cpus); > + free_dynamic_opps: dev_pm_opp_remove_all_dynamic(cpu_dev); > +free_cpumask: > + free_cpumask_var(scmi_cpus); > + return ret; > +} > + > static int scmi_cpufreq_probe(struct scmi_device *sdev) > { > int ret; > struct device *dev = &sdev->dev; > + int cpu; > + struct device *cpu_dev; > > handle = sdev->handle; > > @@ -247,6 +305,24 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) > devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); > #endif > > + ret = scmi_init_cpudata(); > + if (ret) { > + pr_err("%s: init cpu data failed\n", __func__); > + return ret; > + } > + > + for_each_possible_cpu(cpu) { > + cpu_dev = get_cpu_device(cpu); > + > + ret = scmi_init_device(handle, cpu); > + if (ret) { > + dev_err(cpu_dev, "%s: init device failed\n", > + __func__); > + goto clean; > + } > + } > + > ret = cpufreq_register_driver(&scmi_cpufreq_driver); > if (ret) { > dev_err(dev, "%s: registering cpufreq failed, err: %d\n", /* clean any dynamic OPPs already set */ clean: for_each_possible_cpu(cpu) { cpu_dev = get_cpu_device(cpu); dev_pm_opp_remove_all_dynamic(cpu_dev); } return ret; } Thanks Cristian > @@ -258,6 +334,20 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) > > static void scmi_cpufreq_remove(struct scmi_device *sdev) > { > + int cpu; > + struct device *cpu_dev; > + > + for_each_possible_cpu(cpu) { > + cpu_dev = get_cpu_device(cpu); > + > + dev_pm_opp_free_cpufreq_table(cpu_dev, > + &cpudata_table[cpu].freq_table); > + > + free_cpumask_var(cpudata_table[cpu].scmi_shared_cpus); > + } > + > + kfree(cpudata_table); > + > cpufreq_unregister_driver(&scmi_cpufreq_driver); > } > > -- > 2.27.0 >
Hi Cristian, sorry for my late reply. Thanks for looking into this. I am preparing a v7 with suggestions proposed by Viresh which, hopefully, should remove some unclear parts and resolve your comments. I had left behind some dealloc, so thanks for spotting! Many thanks, Nicola On 1/14/21 4:54 PM, Cristian Marussi wrote: > Hi Nicola, > > a few remarks down below. > > On Mon, Jan 11, 2021 at 03:45:22PM +0000, Nicola Mazzucato wrote: >> Some of the cpu related initialisation can be done at probe stage. >> This patch moves those initialisations from the ->init callback to the >> probe stage. >> >> This is done in preparation for adding support to retrieve additional >> information from DT (CPUs sharing v/f lines). >> >> Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> >> --- >> drivers/cpufreq/scmi-cpufreq.c | 180 ++++++++++++++++++++++++--------- >> 1 file changed, 135 insertions(+), 45 deletions(-) >> >> diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c >> index 15b213ed78fa..4aa97cdc5997 100644 >> --- a/drivers/cpufreq/scmi-cpufreq.c >> +++ b/drivers/cpufreq/scmi-cpufreq.c >> @@ -25,6 +25,14 @@ struct scmi_data { >> struct device *cpu_dev; >> }; >> >> +/* Per-CPU storage for runtime management */ >> +struct scmi_cpudata { >> + cpumask_var_t scmi_shared_cpus; >> + struct cpufreq_frequency_table *freq_table; >> +}; >> + >> +static struct scmi_cpudata *cpudata_table; >> + >> static const struct scmi_handle *handle; >> >> static unsigned int scmi_cpufreq_get_rate(unsigned int cpu) >> @@ -120,13 +128,10 @@ scmi_get_cpu_power(unsigned long *power, unsigned long *KHz, >> >> static int scmi_cpufreq_init(struct cpufreq_policy *policy) >> { >> - int ret, nr_opp; >> + int ret; >> unsigned int latency; >> struct device *cpu_dev; >> struct scmi_data *priv; >> - struct cpufreq_frequency_table *freq_table; >> - struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); >> - bool power_scale_mw; >> >> cpu_dev = get_cpu_device(policy->cpu); >> if (!cpu_dev) { >> @@ -134,42 +139,19 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) >> return -ENODEV; >> } >> >> - ret = handle->perf_ops->device_opps_add(handle, cpu_dev); >> - if (ret) { >> - dev_warn(cpu_dev, "failed to add opps to the device\n"); >> - return ret; >> - } >> - >> - ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus); >> - if (ret) { >> - dev_warn(cpu_dev, "failed to get sharing cpumask\n"); >> - return ret; >> - } >> - >> - ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); >> - if (ret) { >> - dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", >> - __func__, ret); >> - return ret; >> - } >> - >> priv = kzalloc(sizeof(*priv), GFP_KERNEL); >> if (!priv) { >> ret = -ENOMEM; >> goto out_free_opp; >> } >> >> - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); >> - if (ret) { >> - dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); >> - goto out_free_priv; >> - } >> + cpumask_copy(policy->cpus, cpudata_table[policy->cpu].scmi_shared_cpus); >> >> priv->cpu_dev = cpu_dev; >> priv->domain_id = handle->perf_ops->device_domain_id(cpu_dev); >> >> policy->driver_data = priv; >> - policy->freq_table = freq_table; >> + policy->freq_table = cpudata_table[policy->cpu].freq_table; >> >> /* SCMI allows DVFS request for any domain from any CPU */ >> policy->dvfs_possible_from_any_cpu = true; >> @@ -183,23 +165,8 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) >> policy->fast_switch_possible = >> handle->perf_ops->fast_switch_possible(handle, cpu_dev); >> >> - nr_opp = dev_pm_opp_get_opp_count(cpu_dev); >> - if (nr_opp <= 0) { >> - dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", >> - __func__, ret); >> - >> - ret = -ENODEV; >> - goto out_free_priv; >> - } >> - >> - power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); >> - em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus, >> - power_scale_mw); >> - >> return 0; >> >> -out_free_priv: >> - kfree(priv); >> out_free_opp: >> dev_pm_opp_remove_all_dynamic(cpu_dev); >> > > My understanding (but I could be wrong given my limited familiarity with > CPUFREQ ... so bear with me) is that dev_pm_opp_remove_all_dynamic() is > meant to clean dynamic OPPs added by dev_pm_opp_add() which in turn in > this driver is folded inside the handle->perf_ops->device_opps_add() call, > so is not that this call should be added also on the error path inside > the new scmi_init_device() ? (this was already faulty this way in the > original code to be honest...if faulty at all :D) > > I added a few such invocations down below as rough untested example of > what I mean. > >> @@ -210,7 +177,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy) >> { >> struct scmi_data *priv = policy->driver_data; >> >> - dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); >> dev_pm_opp_remove_all_dynamic(priv->cpu_dev); >> kfree(priv); >> >> @@ -231,10 +197,102 @@ static struct cpufreq_driver scmi_cpufreq_driver = { >> .exit = scmi_cpufreq_exit, >> }; >> >> +static int scmi_init_cpudata(void) >> +{ >> + int cpu; >> + unsigned int ncpus = num_possible_cpus(); >> + >> + cpudata_table = kzalloc(sizeof(*cpudata_table) * ncpus, GFP_KERNEL); > Shouldn/t this be a kcalloc() given it's an array allocation, checkpatch > complains too. > >> + if (!cpudata_table) >> + return -ENOMEM; >> + >> + for_each_possible_cpu(cpu) { >> + if (!zalloc_cpumask_var(&cpudata_table[cpu].scmi_shared_cpus, >> + GFP_KERNEL)) >> + goto out; >> + } >> + >> + return 0; >> + >> +out: >> + kfree(cpudata_table); >> + return -ENOMEM; >> +} >> + >> +static int scmi_init_device(const struct scmi_handle *handle, int cpu) >> +{ >> + struct device *cpu_dev; >> + int ret, nr_opp; >> + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); >> + bool power_scale_mw; >> + cpumask_var_t scmi_cpus; >> + >> + if (!zalloc_cpumask_var(&scmi_cpus, GFP_KERNEL)) >> + return -ENOMEM; >> + >> + cpumask_set_cpu(cpu, scmi_cpus); >> + >> + cpu_dev = get_cpu_device(cpu); >> + >> + ret = scmi_get_sharing_cpus(cpu_dev, scmi_cpus); >> + if (ret) { >> + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); >> + goto free_cpumask; >> + } >> + >> + /* >> + * We get here for each CPU. Add OPPs only on those CPUs for which we >> + * haven't already done so, or set their OPPs as shared. >> + */ >> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); >> + if (nr_opp <= 0) { >> + ret = handle->perf_ops->device_opps_add(handle, cpu_dev); >> + if (ret) { >> + dev_warn(cpu_dev, "failed to add opps to the device\n"); >> + goto free_cpumask; >> + } >> + >> + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, scmi_cpus); >> + if (ret) { >> + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", >> + __func__, ret); > goto free_dynamic_opps; >> + } >> + >> + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); >> + if (nr_opp <= 0) { >> + dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", >> + __func__, ret); >> + >> + ret = -ENODEV; > goto free_dynamic_opps; >> + } >> + >> + power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); >> + em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, scmi_cpus, >> + power_scale_mw); >> + } >> + >> + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, >> + &cpudata_table[cpu].freq_table); >> + if (ret) { >> + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); > goto free_dynamic_opps; >> + } >> + >> + cpumask_copy(cpudata_table[cpu].scmi_shared_cpus, scmi_cpus); >> + > free_dynamic_opps: > dev_pm_opp_remove_all_dynamic(cpu_dev); >> +free_cpumask: >> + free_cpumask_var(scmi_cpus); >> + return ret; >> +} >> + >> static int scmi_cpufreq_probe(struct scmi_device *sdev) >> { >> int ret; >> struct device *dev = &sdev->dev; >> + int cpu; >> + struct device *cpu_dev; >> >> handle = sdev->handle; >> >> @@ -247,6 +305,24 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) >> devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); >> #endif >> >> + ret = scmi_init_cpudata(); >> + if (ret) { >> + pr_err("%s: init cpu data failed\n", __func__); >> + return ret; >> + } >> + >> + for_each_possible_cpu(cpu) { >> + cpu_dev = get_cpu_device(cpu); >> + >> + ret = scmi_init_device(handle, cpu); >> + if (ret) { >> + dev_err(cpu_dev, "%s: init device failed\n", >> + __func__); >> + > goto clean; >> + } >> + } >> + >> ret = cpufreq_register_driver(&scmi_cpufreq_driver); >> if (ret) { >> dev_err(dev, "%s: registering cpufreq failed, err: %d\n", > > /* clean any dynamic OPPs already set */ > clean: > for_each_possible_cpu(cpu) { > cpu_dev = get_cpu_device(cpu); > > dev_pm_opp_remove_all_dynamic(cpu_dev); > } > > return ret; > } > > > Thanks > > Cristian > >> @@ -258,6 +334,20 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) >> >> static void scmi_cpufreq_remove(struct scmi_device *sdev) >> { >> + int cpu; >> + struct device *cpu_dev; >> + >> + for_each_possible_cpu(cpu) { >> + cpu_dev = get_cpu_device(cpu); >> + >> + dev_pm_opp_free_cpufreq_table(cpu_dev, >> + &cpudata_table[cpu].freq_table); >> + >> + free_cpumask_var(cpudata_table[cpu].scmi_shared_cpus); >> + } >> + >> + kfree(cpudata_table); >> + >> cpufreq_unregister_driver(&scmi_cpufreq_driver); >> } >> >> -- >> 2.27.0 >>
diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index 15b213ed78fa..4aa97cdc5997 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -25,6 +25,14 @@ struct scmi_data { struct device *cpu_dev; }; +/* Per-CPU storage for runtime management */ +struct scmi_cpudata { + cpumask_var_t scmi_shared_cpus; + struct cpufreq_frequency_table *freq_table; +}; + +static struct scmi_cpudata *cpudata_table; + static const struct scmi_handle *handle; static unsigned int scmi_cpufreq_get_rate(unsigned int cpu) @@ -120,13 +128,10 @@ scmi_get_cpu_power(unsigned long *power, unsigned long *KHz, static int scmi_cpufreq_init(struct cpufreq_policy *policy) { - int ret, nr_opp; + int ret; unsigned int latency; struct device *cpu_dev; struct scmi_data *priv; - struct cpufreq_frequency_table *freq_table; - struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); - bool power_scale_mw; cpu_dev = get_cpu_device(policy->cpu); if (!cpu_dev) { @@ -134,42 +139,19 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) return -ENODEV; } - ret = handle->perf_ops->device_opps_add(handle, cpu_dev); - if (ret) { - dev_warn(cpu_dev, "failed to add opps to the device\n"); - return ret; - } - - ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus); - if (ret) { - dev_warn(cpu_dev, "failed to get sharing cpumask\n"); - return ret; - } - - ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); - if (ret) { - dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", - __func__, ret); - return ret; - } - priv = kzalloc(sizeof(*priv), GFP_KERNEL); if (!priv) { ret = -ENOMEM; goto out_free_opp; } - ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table); - if (ret) { - dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); - goto out_free_priv; - } + cpumask_copy(policy->cpus, cpudata_table[policy->cpu].scmi_shared_cpus); priv->cpu_dev = cpu_dev; priv->domain_id = handle->perf_ops->device_domain_id(cpu_dev); policy->driver_data = priv; - policy->freq_table = freq_table; + policy->freq_table = cpudata_table[policy->cpu].freq_table; /* SCMI allows DVFS request for any domain from any CPU */ policy->dvfs_possible_from_any_cpu = true; @@ -183,23 +165,8 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy) policy->fast_switch_possible = handle->perf_ops->fast_switch_possible(handle, cpu_dev); - nr_opp = dev_pm_opp_get_opp_count(cpu_dev); - if (nr_opp <= 0) { - dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", - __func__, ret); - - ret = -ENODEV; - goto out_free_priv; - } - - power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); - em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus, - power_scale_mw); - return 0; -out_free_priv: - kfree(priv); out_free_opp: dev_pm_opp_remove_all_dynamic(cpu_dev); @@ -210,7 +177,6 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy) { struct scmi_data *priv = policy->driver_data; - dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table); dev_pm_opp_remove_all_dynamic(priv->cpu_dev); kfree(priv); @@ -231,10 +197,102 @@ static struct cpufreq_driver scmi_cpufreq_driver = { .exit = scmi_cpufreq_exit, }; +static int scmi_init_cpudata(void) +{ + int cpu; + unsigned int ncpus = num_possible_cpus(); + + cpudata_table = kzalloc(sizeof(*cpudata_table) * ncpus, GFP_KERNEL); + if (!cpudata_table) + return -ENOMEM; + + for_each_possible_cpu(cpu) { + if (!zalloc_cpumask_var(&cpudata_table[cpu].scmi_shared_cpus, + GFP_KERNEL)) + goto out; + } + + return 0; + +out: + kfree(cpudata_table); + return -ENOMEM; +} + +static int scmi_init_device(const struct scmi_handle *handle, int cpu) +{ + struct device *cpu_dev; + int ret, nr_opp; + struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power); + bool power_scale_mw; + cpumask_var_t scmi_cpus; + + if (!zalloc_cpumask_var(&scmi_cpus, GFP_KERNEL)) + return -ENOMEM; + + cpumask_set_cpu(cpu, scmi_cpus); + + cpu_dev = get_cpu_device(cpu); + + ret = scmi_get_sharing_cpus(cpu_dev, scmi_cpus); + if (ret) { + dev_warn(cpu_dev, "failed to get sharing cpumask\n"); + goto free_cpumask; + } + + /* + * We get here for each CPU. Add OPPs only on those CPUs for which we + * haven't already done so, or set their OPPs as shared. + */ + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); + if (nr_opp <= 0) { + ret = handle->perf_ops->device_opps_add(handle, cpu_dev); + if (ret) { + dev_warn(cpu_dev, "failed to add opps to the device\n"); + goto free_cpumask; + } + + ret = dev_pm_opp_set_sharing_cpus(cpu_dev, scmi_cpus); + if (ret) { + dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", + __func__, ret); + goto free_cpumask; + } + + nr_opp = dev_pm_opp_get_opp_count(cpu_dev); + if (nr_opp <= 0) { + dev_err(cpu_dev, "%s: No OPPs for this device: %d\n", + __func__, ret); + + ret = -ENODEV; + goto free_cpumask; + } + + power_scale_mw = handle->perf_ops->power_scale_mw_get(handle); + em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, scmi_cpus, + power_scale_mw); + } + + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, + &cpudata_table[cpu].freq_table); + if (ret) { + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); + goto free_cpumask; + } + + cpumask_copy(cpudata_table[cpu].scmi_shared_cpus, scmi_cpus); + +free_cpumask: + free_cpumask_var(scmi_cpus); + return ret; +} + static int scmi_cpufreq_probe(struct scmi_device *sdev) { int ret; struct device *dev = &sdev->dev; + int cpu; + struct device *cpu_dev; handle = sdev->handle; @@ -247,6 +305,24 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); #endif + ret = scmi_init_cpudata(); + if (ret) { + pr_err("%s: init cpu data failed\n", __func__); + return ret; + } + + for_each_possible_cpu(cpu) { + cpu_dev = get_cpu_device(cpu); + + ret = scmi_init_device(handle, cpu); + if (ret) { + dev_err(cpu_dev, "%s: init device failed\n", + __func__); + + return ret; + } + } + ret = cpufreq_register_driver(&scmi_cpufreq_driver); if (ret) { dev_err(dev, "%s: registering cpufreq failed, err: %d\n", @@ -258,6 +334,20 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) static void scmi_cpufreq_remove(struct scmi_device *sdev) { + int cpu; + struct device *cpu_dev; + + for_each_possible_cpu(cpu) { + cpu_dev = get_cpu_device(cpu); + + dev_pm_opp_free_cpufreq_table(cpu_dev, + &cpudata_table[cpu].freq_table); + + free_cpumask_var(cpudata_table[cpu].scmi_shared_cpus); + } + + kfree(cpudata_table); + cpufreq_unregister_driver(&scmi_cpufreq_driver); }
Some of the cpu related initialisation can be done at probe stage. This patch moves those initialisations from the ->init callback to the probe stage. This is done in preparation for adding support to retrieve additional information from DT (CPUs sharing v/f lines). Signed-off-by: Nicola Mazzucato <nicola.mazzucato@arm.com> --- drivers/cpufreq/scmi-cpufreq.c | 180 ++++++++++++++++++++++++--------- 1 file changed, 135 insertions(+), 45 deletions(-)