| Message ID | 20210110190529.46135-5-tony@atomide.com |
|---|---|
| State | New |
| Headers | show |
| Series | Lost key-up interrupt handling for omap4-keypad | expand |
* Dmitry Torokhov <dmitry.torokhov@gmail.com> [210111 05:01]: > Hi Tony, > > On Sun, Jan 10, 2021 at 09:05:28PM +0200, Tony Lindgren wrote: > > @@ -350,15 +379,12 @@ static int omap4_keypad_probe(struct platform_device *pdev) > > > > error = omap4_keypad_check_revision(&pdev->dev, > > keypad_data); > > - if (!error) { > > - /* Ensure device does not raise interrupts */ > > - omap4_keypad_stop(keypad_data); > > - } > > - > > - pm_runtime_put_sync(&pdev->dev); > > Why are we moving this down? The idea was to make sure the power usage > counters are correct even if we exit probe early. Yes you are right, omap4_keypad_close() won't help with balancing the get if we exit early. > Can we call pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend() > here? Yes that should work as there's no more register access during the probe. Regards, Tony
* Tony Lindgren <tony@atomide.com> [210111 05:13]: > * Dmitry Torokhov <dmitry.torokhov@gmail.com> [210111 05:01]: > > Hi Tony, > > > > On Sun, Jan 10, 2021 at 09:05:28PM +0200, Tony Lindgren wrote: > > > @@ -350,15 +379,12 @@ static int omap4_keypad_probe(struct platform_device *pdev) > > > > > > error = omap4_keypad_check_revision(&pdev->dev, > > > keypad_data); > > > - if (!error) { > > > - /* Ensure device does not raise interrupts */ > > > - omap4_keypad_stop(keypad_data); > > > - } > > > - > > > - pm_runtime_put_sync(&pdev->dev); > > > > Why are we moving this down? The idea was to make sure the power usage > > counters are correct even if we exit probe early. > > Yes you are right, omap4_keypad_close() won't help with balancing the > get if we exit early. > > > Can we call pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend() > > here? > > Yes that should work as there's no more register access during the probe. Below is an updated version. I updated probe to use dev instead of &pdev->dev since we have it there. Does this look OK to you? Regards, Tony 8< ---------------------------
On Mon, Jan 11, 2021 at 08:02:50AM +0200, Tony Lindgren wrote: > * Tony Lindgren <tony@atomide.com> [210111 05:13]: > > * Dmitry Torokhov <dmitry.torokhov@gmail.com> [210111 05:01]: > > > Hi Tony, > > > > > > On Sun, Jan 10, 2021 at 09:05:28PM +0200, Tony Lindgren wrote: > > > > @@ -350,15 +379,12 @@ static int omap4_keypad_probe(struct platform_device *pdev) > > > > > > > > error = omap4_keypad_check_revision(&pdev->dev, > > > > keypad_data); > > > > - if (!error) { > > > > - /* Ensure device does not raise interrupts */ > > > > - omap4_keypad_stop(keypad_data); > > > > - } > > > > - > > > > - pm_runtime_put_sync(&pdev->dev); > > > > > > Why are we moving this down? The idea was to make sure the power usage > > > counters are correct even if we exit probe early. > > > > Yes you are right, omap4_keypad_close() won't help with balancing the > > get if we exit early. > > > > > Can we call pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend() > > > here? > > > > Yes that should work as there's no more register access during the probe. > > Below is an updated version. I updated probe to use dev instead of > &pdev->dev since we have it there. Does this look OK to you? Yep, looks good, applied.
diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -184,6 +184,14 @@ static void omap4_keypad_scan_keys(struct omap4_keypad *keypad_data, bool clear) static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) { struct omap4_keypad *keypad_data = dev_id; + struct device *dev = keypad_data->input->dev.parent; + int error; + + error = pm_runtime_get_sync(dev); + if (error < 0) { + pm_runtime_put_noidle(dev); + return IRQ_NONE; + } omap4_keypad_scan_keys(keypad_data, false); @@ -191,14 +199,23 @@ static irqreturn_t omap4_keypad_irq_thread_fn(int irq, void *dev_id) kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS)); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return IRQ_HANDLED; } static int omap4_keypad_open(struct input_dev *input) { struct omap4_keypad *keypad_data = input_get_drvdata(input); + struct device *dev = input->dev.parent; + int error; - pm_runtime_get_sync(input->dev.parent); + error = pm_runtime_get_sync(dev); + if (error < 0) { + pm_runtime_put_noidle(dev); + return error; + } disable_irq(keypad_data->irq); @@ -217,6 +234,9 @@ static int omap4_keypad_open(struct input_dev *input) enable_irq(keypad_data->irq); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return 0; } @@ -234,14 +254,20 @@ static void omap4_keypad_stop(struct omap4_keypad *keypad_data) static void omap4_keypad_close(struct input_dev *input) { - struct omap4_keypad *keypad_data; + struct omap4_keypad *keypad_data = input_get_drvdata(input); + struct device *dev = input->dev.parent; + int error; + + error = pm_runtime_get_sync(dev); + if (error < 0) + pm_runtime_put_noidle(dev); - keypad_data = input_get_drvdata(input); disable_irq(keypad_data->irq); omap4_keypad_stop(keypad_data); enable_irq(keypad_data->irq); - pm_runtime_put_sync(input->dev.parent); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); } static int omap4_keypad_parse_dt(struct device *dev, @@ -288,6 +314,7 @@ static int omap4_keypad_check_revision(struct device *dev, static void omap4_disable_pm(void *d) { + pm_runtime_dont_use_autosuspend(d); pm_runtime_disable(d); } @@ -320,6 +347,7 @@ static int omap4_keypad_probe(struct platform_device *pdev) keypad_data->irq = irq; mutex_init(&keypad_data->lock); + platform_set_drvdata(pdev, keypad_data); error = omap4_keypad_parse_dt(dev, keypad_data); if (error) @@ -329,6 +357,7 @@ static int omap4_keypad_probe(struct platform_device *pdev) if (IS_ERR(keypad_data->base)) return PTR_ERR(keypad_data->base); + pm_runtime_use_autosuspend(dev); pm_runtime_enable(dev); error = devm_add_action_or_reset(dev, omap4_disable_pm, dev); @@ -350,15 +379,12 @@ static int omap4_keypad_probe(struct platform_device *pdev) error = omap4_keypad_check_revision(&pdev->dev, keypad_data); - if (!error) { - /* Ensure device does not raise interrupts */ - omap4_keypad_stop(keypad_data); - } - - pm_runtime_put_sync(&pdev->dev); if (error) return error; + /* Ensure device does not raise interrupts */ + omap4_keypad_stop(keypad_data); + /* input device allocation */ keypad_data->input = input_dev = devm_input_allocate_device(dev); if (!input_dev) @@ -419,7 +445,8 @@ static int omap4_keypad_probe(struct platform_device *pdev) if (error) dev_warn(dev, "failed to set up wakeup irq: %d\n", error); - platform_set_drvdata(pdev, keypad_data); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_put_autosuspend(&pdev->dev); return 0; }
Implement PM runtime autosuspend support to prepare for adding handling to clear stuck last pressed key in the following patches. The hardware has support for autoidle and can wake up to keypress events. Cc: Arthur Demchenkov <spinal.by@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: ruleh <ruleh@gmx.de> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- drivers/input/keyboard/omap4-keypad.c | 49 +++++++++++++++++++++------ 1 file changed, 38 insertions(+), 11 deletions(-)