| Message ID | E1kyc72-0008Pq-1x@rmk-PC.armlinux.org.uk |
|---|---|
| State | New |
| Headers | show |
| Series | [net-next] net: phy: at803x: use phy_modify_mmd() | expand |
On Sun, 10 Jan 2021 17:51:30 +0100 Andrew Lunn wrote: > On Sun, Jan 10, 2021 at 02:54:36PM +0000, Russell King wrote: > > Convert at803x_clk_out_config() to use phy_modify_mmd(). > > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> Applied, thanks!
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index d0b36fd6c265..9636edb8d618 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -529,19 +529,12 @@ static void at803x_remove(struct phy_device *phydev) static int at803x_clk_out_config(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; - int val; if (!priv->clk_25m_mask) return 0; - val = phy_read_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M); - if (val < 0) - return val; - - val &= ~priv->clk_25m_mask; - val |= priv->clk_25m_reg; - - return phy_write_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M, val); + return phy_modify_mmd(phydev, MDIO_MMD_AN, AT803X_MMD7_CLK25M, + priv->clk_25m_mask, priv->clk_25m_reg); } static int at8031_pll_config(struct phy_device *phydev)
Convert at803x_clk_out_config() to use phy_modify_mmd(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/net/phy/at803x.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-)