| Message ID | 20210109140204.151340-3-angelogioacchino.delregno@somainline.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add Awinic AW9523(B) I2C GPIO Expander driver | expand |
Il 09/01/21 23:14, Linus Walleij ha scritto: > Hi Angelo, > > thanks for your patch! > > On Sat, Jan 9, 2021 at 3:02 PM AngeloGioacchino Del Regno > <angelogioacchino.delregno@somainline.org> wrote: > >> +#PIN CONFIGURATION NODES >> +patternProperties: >> + '^.*$': >> + if: >> + type: object >> + then: >> + properties: >> + pins: >> + description: >> + List of gpio pins affected by the properties specified in >> + this subnode. >> + items: >> + pattern: "^gpio([0-9]|1[0-5])$" >> + minItems: 1 >> + maxItems: 16 >> + >> + function: >> + description: >> + Specify the alternative function to be configured for the >> + specified pins. >> + >> + enum: [ gpio, pwm ] >> + >> + bias-disable: true >> + bias-pull-down: true >> + bias-pull-up: true >> + drive-open-drain: true >> + drive-push-pull: true >> + input-enable: true >> + output-high: true >> + output-low: true >> + >> + required: >> + - pins >> + - function > > Is it possible to just $ref /pinctrl/pincfg-node.yaml# for some of this? > Sure, I will try to reference that for V2! > Yours, > Linus Walleij >
On Sat, 09 Jan 2021 15:02:04 +0100, AngeloGioacchino Del Regno wrote: > Add bindings for the Awinic AW9523/AW9523B I2C GPIO Expander driver. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> > --- > .../pinctrl/awinic,aw9523-pinctrl.yaml | 111 ++++++++++++++++++ > 1 file changed, 111 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml:102:1: [error] syntax error: found character '\t' that cannot start any token (syntax) dtschema/dtc warnings/errors: ./Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml: while scanning a block scalar in "<unicode string>", line 94, column 5 found a tab character where an indentation space is expected in "<unicode string>", line 102, column 1 /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml: ignoring, error parsing file warning: no schema found in file: ./Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml Traceback (most recent call last): File "/usr/local/bin/dt-extract-example", line 45, in <module> binding = yaml.load(open(args.yamlfile, encoding='utf-8').read()) File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/main.py", line 343, in load return constructor.get_single_data() File "/usr/local/lib/python3.8/dist-packages/ruamel/yaml/constructor.py", line 111, in get_single_data node = self.composer.get_single_node() File "_ruamel_yaml.pyx", line 706, in _ruamel_yaml.CParser.get_single_node File "_ruamel_yaml.pyx", line 724, in _ruamel_yaml.CParser._compose_document File "_ruamel_yaml.pyx", line 775, in _ruamel_yaml.CParser._compose_node File "_ruamel_yaml.pyx", line 889, in _ruamel_yaml.CParser._compose_mapping_node File "_ruamel_yaml.pyx", line 773, in _ruamel_yaml.CParser._compose_node File "_ruamel_yaml.pyx", line 848, in _ruamel_yaml.CParser._compose_sequence_node File "_ruamel_yaml.pyx", line 904, in _ruamel_yaml.CParser._parse_next_event ruamel.yaml.scanner.ScannerError: while scanning a block scalar in "<unicode string>", line 94, column 5 found a tab character where an indentation space is expected in "<unicode string>", line 102, column 1 make[1]: *** [Documentation/devicetree/bindings/Makefile:20: Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.example.dts] Error 1 make[1]: *** Deleting file 'Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.example.dts' make: *** [Makefile:1370: dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1424120 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml new file mode 100644 index 000000000000..1352b3adb566 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml @@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/awinic,aw9523-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW9523/AW9523B I2C GPIO Expander + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> + +description: | + The Awinic AW9523/AW9523B I2C GPIO Expander featuring 16 multi-function + I/O, 256 steps PWM mode and interrupt support. + +properties: + compatible: + const: awinic,aw9523-pinctrl + + reg: + maxItems: 1 + + '#gpio-cells': + description: | + Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: Specifies the INTN pin IRQ. + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + +#PIN CONFIGURATION NODES +patternProperties: + '^.*$': + if: + type: object + then: + properties: + pins: + description: + List of gpio pins affected by the properties specified in + this subnode. + items: + pattern: "^gpio([0-9]|1[0-5])$" + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the + specified pins. + + enum: [ gpio, pwm ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-open-drain: true + drive-push-pull: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c_node { + gpio-expander@58 { + compatible = "awinic,aw9523-pinctrl"; + reg = <0x58>; + interrupt-parent = <&tlmm>; + interrupts = <50 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 0 16>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>; + }; + };
Add bindings for the Awinic AW9523/AW9523B I2C GPIO Expander driver. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> --- .../pinctrl/awinic,aw9523-pinctrl.yaml | 111 ++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/awinic,aw9523-pinctrl.yaml