diff mbox series

[5/6] dpaa2-mac: remove an unnecessary check

Message ID 20210107153638.753942-6-ciorneiioana@gmail.com
State New
Headers show
Series [1/6] dpaa2-mac: split up initializing the MAC object from connecting to it | expand

Commit Message

Ioana Ciornei Jan. 7, 2021, 3:36 p.m. UTC 
From: Ioana Ciornei <ioana.ciornei@nxp.com>

The dpaa2-eth driver has phylink integration only if the connected dpmac
object is in TYPE_PHY (aka the PCS/PHY etc link status is managed by
Linux instead of the firmware). The check is thus unnecessary because
the code path that reaches the .mac_link_up() callback is only with
TYPE_PHY dpmac objects.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  | 43 ++++++++-----------
 1 file changed, 19 insertions(+), 24 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index 666bc88c178f..40aa81eb3c4b 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -174,30 +174,25 @@  static void dpaa2_mac_link_up(struct phylink_config *config,
 
 	dpmac_state->up = 1;
 
-	if (mac->if_link_type == DPMAC_LINK_TYPE_PHY) {
-		/* If the DPMAC is configured for PHY mode, we need
-		 * to pass the link parameters to the MC firmware.
-		 */
-		dpmac_state->rate = speed;
-
-		if (duplex == DUPLEX_HALF)
-			dpmac_state->options |= DPMAC_LINK_OPT_HALF_DUPLEX;
-		else if (duplex == DUPLEX_FULL)
-			dpmac_state->options &= ~DPMAC_LINK_OPT_HALF_DUPLEX;
-
-		/* This is lossy; the firmware really should take the pause
-		 * enablement status rather than pause/asym pause status.
-		 */
-		if (rx_pause)
-			dpmac_state->options |= DPMAC_LINK_OPT_PAUSE;
-		else
-			dpmac_state->options &= ~DPMAC_LINK_OPT_PAUSE;
-
-		if (rx_pause ^ tx_pause)
-			dpmac_state->options |= DPMAC_LINK_OPT_ASYM_PAUSE;
-		else
-			dpmac_state->options &= ~DPMAC_LINK_OPT_ASYM_PAUSE;
-	}
+	dpmac_state->rate = speed;
+
+	if (duplex == DUPLEX_HALF)
+		dpmac_state->options |= DPMAC_LINK_OPT_HALF_DUPLEX;
+	else if (duplex == DUPLEX_FULL)
+		dpmac_state->options &= ~DPMAC_LINK_OPT_HALF_DUPLEX;
+
+	/* This is lossy; the firmware really should take the pause
+	 * enablement status rather than pause/asym pause status.
+	 */
+	if (rx_pause)
+		dpmac_state->options |= DPMAC_LINK_OPT_PAUSE;
+	else
+		dpmac_state->options &= ~DPMAC_LINK_OPT_PAUSE;
+
+	if (rx_pause ^ tx_pause)
+		dpmac_state->options |= DPMAC_LINK_OPT_ASYM_PAUSE;
+	else
+		dpmac_state->options &= ~DPMAC_LINK_OPT_ASYM_PAUSE;
 
 	err = dpmac_set_link_state(mac->mc_io, 0,
 				   mac->mc_dev->mc_handle, dpmac_state);